Instruction/ maintenance manual of the product CubeX 3D Systems
Go to page of 26
C ubeX 3D print er User guide TM See inside for use and safety inf ormation..
IMPORT ANT SAFETY INFORMA TION Safety symbols and denitions ............................................................................................... 3 Safety guidelines ........................................................................
CUBEX MAINTENANCE Restoring roughness to the Print Pad ......................................................................................... 20 Leveling the Jet Wiper height .........................................................................
SAFETY SYMBOLS AND DEFINITIONS SAFETY GUIDELINES • Follow all safety rules in this section and observe all cautions and warnings in this guide. • Do not modify any safety features or make modications to the Cube. Doing so is prohibited and voids warranty .
Glow-in-the- dark Neon Green * Natural is only available in PLA plastic, not ABS. Neon Orange Glow-in-the- dark Neon Blue Ta n White Y ellow Black Neon Green Silver Green Industrial Grey Blue Natural* T eal Magenta Purple Red Brown 4 PLA This is a hard plastic that has a low environmental impact.
5 REQUIREMENTS FOR YOUR CUBEX Weight and dimensions: • 515mm (w) x 515mm (l) x 598mm (h) (20 ¼” x 20 ¼” x 23 ½” inches) • 36kg (79 lbs) • 37kg (81.
6 UNP ACKING YOUR CUBEX (FOLLOW UNP ACKING GUIDE) 1. Open the box and take out the top lid of the CubeX, it’s between two layers of foam. (Fig. 1) 2. With two people take CubeX out of the box, lift from the metal frame on both sides of the machine. Place CubeX on a table.
7 LINK YOUR CUBEX T O YOUR CUBIFY ACCOUNT Creating an account on Cubify .com is easy and gives you access to all of the great designs and collections that will drive and inspire your creativity .
8 3. Select to the ‘Home’ option on the main menu. 4. Click the ‘Home’ button. This will move the print jet carriage to each of the home switches, checking the XYZ axis and the Home function. The print jet carriage should stop in the home position in the back left corner of the machine.
Y our Cubify Invent license code and USB Key can be found in your CubeX toolbox at the base of the CubeX packaging. 1. Plug the USB provided with your CubeX into your computer and launch “Cubify_Invent.exe”. 2. Follow the onscreen instructions. 3.
10 EX-MAP Allows you to re-map your print jets. EX-CON Allows you to manually jet your print jets, giving you control of temperature and RPM. MOVE Manually moves your print jet carriage in the X, Y and Z directions. HOME Sends the print jet carriage to its home position located in the back left corner of the printer .
11 DOWNLOADING CUBEX SOFTW ARE Go to Cubify .com/cubex/index.aspx and click the download CubeX software link. INST ALLING CUBEX SOFTW ARE 1. Go to the directory where the CubeX software was downloaded and unzip the CubeX software folder . 2. Run the CubeX Setup le.
Fig. 29 Fig. 30 The CubeX software (Fig. 31) is used to create the .cubex les that your CubeX will use to create your parts. The software allows you to orient, scale, re-size and rotate the part before printing.
13 PICK SHELLS Select which Print Jets print which parts. The available options will vary depending on how many Print Jets you have active and what colors are loaded into them.
14 POSITIONING MUL TIPLE P ARTS • Manual positioning: Right click and hold on one of the parts, you can now drag it around the bed (when using this method the bed will automatically switch to top view). (Fig. 41 & 42) • Autoplace: Clicking the auto place button will automatically position your parts on the bed for you.
USING THE SHELL SELECT OR T OOL The Shell Selector tool is used to select which Print Jets print which parts of a multi-material part/multiple parts on a Print Pad. (Fig. 49) The color options available will correspond to the material colors you have set in printer conguration.
Do not change cartridge color or material type during printing; doing so may damage the CubeX. Please ensure you have followed all CubeX setup instructions before starting a print. Failure to do so may damage the CubeX. T est creations have been printed on Y our CubeX before leaving our factory .
Before you attempt to remove your creation from the Print Pad, please ensure that the CubeX has nished printing and that the Print Pad has moved to the bottom of the CubeX. REMOVING YOUR CREA TION FROM THE PRINT P AD ! FINISHING YOUR CREA TION 1. Remove the Print Pad from the CubeX.
REMOVING SUPPORTS WITH THE UL TRASONIC SUPPORT REMOV AL T ANK HOT W A TER METHOD Caustic soda can burn if handled improperly . Never handle caustic soda without using all of the supplied Personal Protective Equipment (PPE): gloves, goggles and tongs. If caustic soda touches the skin, wash it away immediately .
CAUSTIC SODA METHOD Caustic soda can burn if handled improperly . Never handle caustic soda without using all of the supplied Personal Protective Equipment (PPE): gloves, goggles and tongs. If caustic soda touches the skin, wash it away immediately . If caustic soda touches the eyes, immediately use an eyewash treatment.
RESTORING ROUGHNESS T O THE PRINT P AD T o restore roughness to the Print Pad, run the sandpaper included in your toolkit diagonally across the bed corner to corner in both directions.
FINE-TUNING YOUR PRINT P AD 1. Re-install the Print Pad before ne tuning. 2. Use the Up and Down arrows to reduce the gap between the print jet and Print Pad to approximately 2 mm. This will enable ner leveling. (Fig. 74) 3. Use the two remaining visible bolts to repeat the leveling process.
SETTING THE PRINT JET GAP After leveling the Print Pad, the print jet must be set to the correct height to ensure that the rst printed layer sticks properly (if the print jet is too high, the lament will not stick to the Print Pad; if the print jet is too low , the Print Pad may obstruct the print jet).
5. Plug your CubeX into the computer using the PC connection USB port (Fig. 85 & 86). Navigate to the settings tab on the CubeX software and press the Firmware update button. (Fig. 87) 6. The CubeX software will then open windows explorer . Navigate to the rmware you wish to install and open it.
SETTING THE CUBEX PRINT JET OFFSETS CAUTION: Do not use the offset menu unless you have been advised to do so by Cubify Support, as changes to this may affect the quality of multi-material prints.
25 PRINT JET 3 X OFFSET Compare the lines on “X scale 1” and “X scale 3” to nd the ones that most accurately line up. Because variation is small, it may be easiest to spot 3 that look like they all line up. If this is the case, use the middle one as the correct one.
An important point after buying a device 3D Systems CubeX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought 3D Systems CubeX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data 3D Systems CubeX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, 3D Systems CubeX you will learn all the available features of the product, as well as information on its operation. The information that you get 3D Systems CubeX will certainly help you make a decision on the purchase.
If you already are a holder of 3D Systems CubeX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime 3D Systems CubeX.
However, one of the most important roles played by the user manual is to help in solving problems with 3D Systems CubeX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device 3D Systems CubeX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
