Instruction/ maintenance manual of the product SBC-111 Cisco Systems
Go to page of 8
SBC-111 Cisco IOS XR Session Border Controller Con figuration Guide Implementing SBC Redundancy (High Availability) SBC fault tolerant redundancy is based on a 1:1 paired protection model. F or each activ e service card running with the SBC, there should be anoth e r service card providing failure protection (that is, standby).
Implementing SBC Redun dancy (High Availability) Contents SBC-112 Cisco IOS XR Session Border Co ntroller Configuration Guide Contents • Prerequisites for Implementing Redundanc y , page SBC-112 •.
Implementing SBC Redund ancy (High Availability) How to Implement Redundancy SBC-113 Cisco IOS XR Session Border Controller Configuratio n Guide Configuring a Redundancy This task configures a redundancy . SUMMARY STEPS 1. conf igure 2. sbc service-name 3.
Implementing SBC Redun dancy (High Availability) How to Implement Redundan cy SBC-114 Cisco IOS XR Session Border Co ntroller Configuration Guide Deleting a Redundancy This task deletes a redundancy . SUMMARY STEPS 1. conf igure 2. sbc service-name 3.
Implementing SBC Redund ancy (High Availability) How to Implement Redundancy SBC-115 Cisco IOS XR Session Border Controller Configuratio n Guide DETAILED ST EPS Command or Action Purpose Step 1 configure Example: RP/0/0/CPU0:router# configure Enables global con figuration mode.
Implementing SBC Redun dancy (High Availability) Configuration Examples of Implementing a Redundancy SBC-116 Cisco IOS XR Session Border Co ntroller Configuration Guide Configuration Examples of Imple.
Implementing SBC Redund ancy (High Availability) Additional References SBC-117 Cisco IOS XR Session Border Controller Configuratio n Guide Deleting the SBC Redundancy: Example The following e xample shows ho w to delete the SBC conf iguration created in the “Configuring an SBC Redundancy: Example” section: 1.
Implementing SBC Redun dancy (High Availability) Related Command Summary SBC-118 Cisco IOS XR Session Border Co ntroller Configuration Guide MIBs RFCs Technical Assistance Related Command Summary This section provides an alphabetical list of the commands related to redundancy configuration on the Cisco XR 12000 Series Router.
An important point after buying a device Cisco Systems SBC-111 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco Systems SBC-111 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco Systems SBC-111 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco Systems SBC-111 you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco Systems SBC-111 will certainly help you make a decision on the purchase.
If you already are a holder of Cisco Systems SBC-111, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco Systems SBC-111.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco Systems SBC-111. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco Systems SBC-111 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
