Instruction/ maintenance manual of the product OL-3351-01 Cisco Systems
Go to page of 16
CH A P T E R 5-1 Cisco Billing and Measurem ents Server User’s Guide OL-3351-01 5 Configuring BAMS for BAF Output Overview This chapter descri bes how to configure the Cisc o Billing and Measurements Server (BAMS) for Bellcore AMA (Automatic Mess age Accounting) Format (B AF) records.
5-2 Cisco Billing and Measurements Server User’s Guide OL-3351-01 Chapter 5 Configuring BAMS for BAF Output Generating BAF Reco rds Note Before config uring BAMS to generate bil ling and measurements, you should f a miliarize yourself wit h Chapters 3 t o 9 of this guide.
5-3 Cisco Billing and Measurem ents Server User’s Guide OL-3351-01 Chapter 5 Configuring BAMS for BAF Output Identifying Call Types Note The pref ix of the files polled b y the POL task is the input pref ix for FMT , the initial processing task.
5-4 Cisco Billing and Measurements Server User’s Guide OL-3351-01 Chapter 5 Configuring BAMS for BAF Output Identifying Call Types Default BAF Structure Codes and Call Types Ta b l e 5 - 2 defines the default B AF structure codes and call types. The table lists the call categories, call types, and answered and unanswered structure codes.
5-5 Cisco Billing and Measurem ents Server User’s Guide OL-3351-01 Chapter 5 Configuring BAMS for BAF Output Exception and Spec ial Processing (244)TrunkID : 380030234c Module 104 (Trunk ID) (244)Tr.
5-6 Cisco Billing and Measurements Server User’s Guide OL-3351-01 Chapter 5 Configuring BAMS for BAF Output BAF Output Provisionin g Example Processing Transit/Tandem Calls InterLA T A calls ca n originate at, terminate at, or pas s through the Cisco MGC generating the B AF records.
5-7 Cisco Billing and Measurem ents Server User’s Guide OL-3351-01 Chapter 5 Configuring BAMS for BAF Output BAF Output Provisioning Example prov-add:RATING-TYPE:orgzone=3,trmzone=13,ratetype=”INT.
5-8 Cisco Billing and Measurements Server User’s Guide OL-3351-01 Chapter 5 Configuring BAMS for BAF Output BAF Output Provisionin g Example set-nodename::name="virginia" prov-add:poll:host-name1="va-harley",rem-dir1="/opt/CiscoMGC/var/bam",file-prefix1="cdr*", file-suffix1=".
5-9 Cisco Billing and Measurem ents Server User’s Guide OL-3351-01 Chapter 5 Configuring BAMS for BAF Output Call Area Provisioning Example prov-add:rating-type:ORGZONE=1,TRMZONE=13,RATETYPE="M.
5-10 Cisco Billing and Measurements Server User’s Guide OL-3351-01 Chapter 5 Configuring BAMS for BAF Output Call Area Provisioning Example Assumptions Used in This Example In Figure 5-1 , some origination points can call to any point within the metro politan area, with no toll charged.
5-11 Cisco Billing and Measurem ents Server User’s Guide OL-3351-01 Chapter 5 Configuring BAMS for BAF Output Call Area Provisioning Example Figure 5-1 River City Metropolitan Example Zone Membership Each NP ANXX combination that is suppo rted within the metropolitan area must be a member of a zone.
5-12 Cisco Billing and Measurements Server User’s Guide OL-3351-01 Chapter 5 Configuring BAMS for BAF Output Call Area Provisioning Example Note Zoning provid es a mechanism for different iating between rating types (for example, flat rate and message calls).
5-13 Cisco Billing and Measurem ents Server User’s Guide OL-3351-01 Chapter 5 Configuring BAMS for BAF Output Call Area Provisioning Example Banded Message Rates In Figure 5-1 , man y zones are not adjacent to other zo nes.
5-14 Cisco Billing and Measurements Server User’s Guide OL-3351-01 Chapter 5 Configuring BAMS for BAF Output Call Area Provisioning Example Configuring Toll-Free Calls Different countries hav e dif ferent designations for toll-free dialing.
5-15 Cisco Billing and Measurem ents Server User’s Guide OL-3351-01 Chapter 5 Configuring BAMS for BAF Output BAF Configuration Parameters Step 1 Determine if the netw ork is switched or is nailed up. Note For a nailed up ( Cisco SC2200) connection, def ine th e fiel d values in the Nailed Con nection table using the SIGP A T H tag ID.
5-16 Cisco Billing and Measurements Server User’s Guide OL-3351-01 Chapter 5 Configuring BAMS for BAF Output BAF Configuration Parameters Adding a New NPANXX (Zone Membership) Use the NP ANXX tag ID to add ne w NP ANXX information. Refer to the “NP ANXX T ag ID” section on page 4-13 for field name descript ions and values.
An important point after buying a device Cisco Systems OL-3351-01 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco Systems OL-3351-01 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco Systems OL-3351-01 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco Systems OL-3351-01 you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco Systems OL-3351-01 will certainly help you make a decision on the purchase.
If you already are a holder of Cisco Systems OL-3351-01, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco Systems OL-3351-01.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco Systems OL-3351-01. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco Systems OL-3351-01 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
