Instruction/ maintenance manual of the product OL-31454-01 Cisco Systems
Go to page of 114
Cisco Systems, Inc. www.cisco.com Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the Cisco we bsite at www.
THE SPECIFICATION S AND INFORMAT ION REGARDING THE PRODUCTS IN THIS MA NUAL ARE SUBJ ECT TO CHANGE WITHOUT NOT ICE. ALL STATEMENTS , INFORMATION , AND RECOMMEN DATIONS I N THIS MANUA L ARE BELIEVE D TO BE ACCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED.
iii Cisco 2010 Connected Grid Router Hardwar e Installation Guide OL-31454-01 CONTENTS Preface vii CHAPTER 1 Overview of the Router 1-1 Chassis Views 1-1 Hardware Features 1-2 Locating Chassis Feature.
Contents iv Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Ethernet Connections 2-7 Serial Connectio ns 2-7 Required Tools and Equipment for Installation and Maintenance 2-9 .
Contents v Cisco 2010 Connected Grid Router Hardwar e Installation Guide OL-31454-01 Identify a Rollover Cable 3-27 Console Port Connection to a PC 3-28 Console Port Signaling and Cabling with a DB-9 .
Contents vi Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Saving Backup Cop ies of Configuratio n and System Image 4-22 Verifying the Initial Configuration 4-24 CHAPTER 5 In.
vii Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 Preface This preface describes the objectiv es , audience, org anization, and con ventions of this guide, and describes related docu ments that ha ve additional information.
viii Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Organization This guide includes th e follo wing sections: Conventions This document uses the f ollo wing con venti ons: C.
ix Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 Note Means reader take note . Ti p Means the following info rmation will help you sol ve a pr oblem . Caution Means reader be car e ful . In this situation, you might perform an actio n that could result in equipment damage or loss of data.
x Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Warnung WICHTIGE SICHERHEITSHINWEISE Dieses Warnsymbol b edeutet Gefahr . Sie befinden sich in einer Situation, die zu V erletzungen führen kann.
xi Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 Va r n i n g ! VIKTIGA SÄKERHETSANVISNINGAR Denna varningssignal signalerar fara.
xii Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Avis o INSTRUÇÕES IMPORT ANTES DE SEGURANÇA Este símbolo de aviso significa perigo.
xiii Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01.
xiv Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Access the Re gulatory Compl iance and Safety Informat ion for Cisco 201 0 Connected Grid Router at: http://www .cisco.com/en/US/ docs/routers/access/ 200 0/CGR2010/hardw a re/rcsi/rcsiCGR2000series.
xv Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 Searching for Cisco Documents T o search a HTML document using a web browser , press Ctrl-F (W indows) or Cmd-F (Apple). In most browsers, the option to search whole words only , inv oke case sensitivity , or search forward and backward is also av ailable.
xvi Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01.
CH A P T E R 1-1 Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 1 Overview of the Router The Cisco 2010 Connected Grid Rout er is the f irst router in the Cisco 2000 Series C onnected Grid solutions.
1-2 Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Chapter 1 Over view of the Router Hardware Features Figur e 1 -1 Cisco CGR 20 1 0 Router Chassis Figure 1 -2 P ower Supply .
1-3 Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 Chapter 1 Overview of the Route r Hardware Features Locating Chassis Features and Functions Figure 1-4 sho ws the different chassis features and function s av ailable on the pow er supply side vie w of the Cisco CGR 2010 rou ter .
1-4 Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Chapter 1 Over view of the Router Hardware Features Figure 1 -5 Cable Side View Featur es and Functions on the Cisco CGR 20.
1-5 Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 Chapter 1 Overview of the Route r Hardware Features Built-in Interface Ports Ta b l e 1 - 1 summarizes the interf ace ports b uilt into the ro uter chassis.
1-6 Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Chapter 1 Over view of the Router Hardware Features The SFP port shares the same physical port as an RJ-45 GE port. The SFP port can be configured for the follo wing beha viors: • Always use the RJ-45 port.
1-7 Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 Chapter 1 Overview of the Route r Hardware Features The router can accommodate four single-wide GR WICS, or two single-wide GR WICs and one double-wide GR WIC, or two double-wide GR WICs at any one time.
1-8 Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Chapter 1 Over view of the Router Slot, Port, and In terface Information Real-Time Clock Upon system po wer up, the internal real-time clock with battery backup pro vides the system software with time of day .
1-9 Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 Chapter 1 Overview of the Route r LED Indicators Figure 1 -7 Cable Side View LEDs on the Cisco CGR 20 1 0 Router For LED trou bleshooting inf ormation, including possibl e trouble causes and correcti ve actions, see Ta b l e 1 - 5 and Ta b l e 1 - 6 be low .
1-10 Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Chapter 1 Over view of the Router LED Indicators A CT Solid or blinking green Solid or blinking indicates pack et acti vity between the for warding and routing en gine and any I/O port.
1-11 Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 Chapter 1 Overview of the Route r Specifications Specifications T o view specifications for the Cisco CGR 2010 router , see the Cisco 2010 Co nnected Grid Ro uter data sheet at: http://www .
1-12 Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Chapter 1 Over view of the Router Specifications.
CH A P T E R 2-1 Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 2 Preparing for Router Installation This document pr ovides p reinstallation infor mation, such as reco mmendations and requirements that should be met prior to install ing your router .
2-2 Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Chapter 2 Preparing for Ro uter Installation Safety Re commendations War ni n g This product relies on the building’ s installation for short-circuit (overcurrent) protection.
2-3 Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 Chapter 2 Preparin g for Router Installation Safety Recommendations Safety with Electricity Follo w these guidelines when workin g on equipment powered by electricity: • Locate the emergenc y po wer-of f switch in the room in which you are working.
2-4 Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Chapter 2 Preparing for Ro uter Installation General Site Requirements Caution For the safety of y our equipment, periodically check the resistance v alue of the antistatic strap.
2-5 Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 Chapter 2 Preparin g for Router Installation Power Guidelines and Requirements • When equipment installed in a rack (particularly in an enclosed rack) fail s, try operati ng the equipment by i tself, if possible.
2-6 Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Chapter 2 Preparing for Ro uter Installation Network Cabling Specifications The default parameters for the con sole port are 9600 baud, 8 data bits, no parit y , and 1 stop bit.
2-7 Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 Chapter 2 Preparin g for Router Installation Network Cabling Specifica tions See the follo wing document for more informat.
2-8 Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Chapter 2 Preparing for Ro uter Installation Network Cabling Specifications Signaling Standards Supported The synchronous serial ports a v ailable for the rout er support the fo llo wing signaling st andards: EIA/TIA-232 (EIA-323).
2-9 Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 Chapter 2 Preparin g for Router Installation Required Tools and Equipmen t for Installa tion and Maintenance Asynchronous/.
2-10 Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Chapter 2 Preparing for Ro uter Installation Installation Checklist Installation Checklist The sample installation checklist lists i tems and pro cedures for installing a new router .
2-11 Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 Chapter 2 Preparin g for Router Installation Creating a Site Log – Maintenance schedules and requirements – Maintenance procedures performed – Intermittent problems – Comments and notes Inspect all items for shipp ing damage.
2-12 Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Chapter 2 Preparing for Ro uter Installation Creating a Site Log.
CH A P T E R 3-1 Cisco 2010 Connected Grid Router Ha rdware Installation Guide OL-31454-01 3 Installing and Connecting the Router This document descri bes ho w to instal l and connect Cisco CGR 2010 routers to a LAN or W AN, as well as ho w to connect A C or DC po wer to the router .
3-2 Cisco 2010 Connected Grid Router Hardware Installa tion Guide OL-31454-01 Chapter 3 Installing a nd Connecting the Ro uter War ni n g This unit might have more than one power supply connection. All connections must be removed to de-energize the unit.
3-3 Cisco 2010 Connected Grid Router Ha rdware Installation Guide OL-31454-01 Chapter 3 Installin g and Connecting the Router What you Need to Know War ni n g A readily accessible t wo-poled disconnect de vice must be inco rporated in the fixed wiring.
3-4 Cisco 2010 Connected Grid Router Hardware Installa tion Guide OL-31454-01 Chapter 3 Installing a nd Connecting the Ro uter Before You Begin Before You Begin Before installing and connect ing a Cis.
3-5 Cisco 2010 Connected Grid Router Ha rdware Installation Guide OL-31454-01 Chapter 3 Installin g and Connecting the Router Installing the Router in a Rac k Installing the Router in a Rack The Cisco CGR 2010 router can only be mounted in a rack.
3-6 Cisco 2010 Connected Grid Router Hardware Installa tion Guide OL-31454-01 Chapter 3 Installing a nd Connecting the Ro uter Installing the Router in a Rack Attaching Rack-Mount Brackets to Cisco CG.
3-7 Cisco 2010 Connected Grid Router Ha rdware Installation Guide OL-31454-01 Chapter 3 Installin g and Connecting the Router Installing the Router in a Rac k Mounting the Router in a Rack After you attach the rack-mou nt brackets to th e router chassis, use the screws pro vided with the rack to install the chassi s in the rack.
3-8 Cisco 2010 Connected Grid Router Hardware Installa tion Guide OL-31454-01 Chapter 3 Installing a nd Connecting the Ro uter Power-Supply Modules Power-Supply Modules This section descri bes ho w to connect A C po wer and DC po wer to the Cisco CGR 2010 router .
3-9 Cisco 2010 Connected Grid Router Ha rdware Installation Guide OL-31454-01 Chapter 3 Installin g and Connecting the Router Power-Supply Modu les Figur e 3-6 Po wer -Input T erminal Designations Note The pow er-supply module 1 connection is l abeled PSU1, and the po wer-supply module 2 co nnection is labeled PSU2.
3-10 Cisco 2010 Connected Grid Router Hardware Installa tion Guide OL-31454-01 Chapter 3 Installing a nd Connecting the Ro uter Power-Supply Modules Connecting AC Power Step 5 T o connect A C po wer: War ni n g When installing or replacing th e unit, the ground conn ection must alway s be made first and disconnected last.
3-11 Cisco 2010 Connected Grid Router Ha rdware Installation Guide OL-31454-01 Chapter 3 Installin g and Connecting the Router Power-Supply Modu les Step 6 Fully insert the un- insulated lead in to the terminal block an d scre w each capti ve screw on the terminal block tight to ensure p roper connection.
3-12 Cisco 2010 Connected Grid Router Hardware Installa tion Guide OL-31454-01 Chapter 3 Installing a nd Connecting the Ro uter Power-Supply Modules Figur e 3-9 Po w er -Input T er m inal Desig nations Note The pow er-supply module 1 connection is l abeled PSU1, and the po wer-supply module 2 co nnection is labeled PS U2.
3-13 Cisco 2010 Connected Grid Router Ha rdware Installation Guide OL-31454-01 Chapter 3 Installin g and Connecting the Router Power-Supply Modu les Connecting DC Power Step 5 T o connect DC po wer: War ni n g When installing or replacing th e unit, the ground conn ection must alway s be made first and disconnected last.
3-14 Cisco 2010 Connected Grid Router Hardware Installa tion Guide OL-31454-01 Chapter 3 Installing a nd Connecting the Ro uter Power-Supply Modules Figur e 3-1 1 Using Tie W raps with the Str ain Relief M echanism Caution Ensure that all strands of a stranded wire are prop erly captured into the terminal block.
3-15 Cisco 2010 Connected Grid Router Ha rdware Installation Guide OL-31454-01 Chapter 3 Installin g and Connecting the Router Power-Supply Modu les Step 11 If you have two po wer supplies, i nstall the second po wer supply in the av ailable slot and repeat Step 1 through Step 10 .
3-16 Cisco 2010 Connected Grid Router Hardware Installa tion Guide OL-31454-01 Chapter 3 Installing a nd Connecting the Ro uter Power-Supply Modules Shutting Off Power Even thou gh shutting of f power to the Cisco CGR 2 010 router is anticipat ed to be infrequent, there may be occasion to turn of f the router .
3-17 Cisco 2010 Connected Grid Router Ha rdware Installation Guide OL-31454-01 Chapter 3 Installin g and Connecting the Router Connecting to a Console Terminal or Modem Figur e 3-13 Removing the Cisco CGR 20 1 0 Router P ower Supply Step 3 Insert the replacement po wer supply into the chassis.
3-18 Cisco 2010 Connected Grid Router Hardware Installa tion Guide OL-31454-01 Chapter 3 Installing a nd Connecting the Ro uter Connecting to a Console Terminal or Mod em Connecting to the Serial Port with Microsoft Windows This section describes usin g Microsoft W indows to connect t o the serial port.
3-19 Cisco 2010 Connected Grid Router Ha rdware Installation Guide OL-31454-01 Chapter 3 Installin g and Connecting the Router Connecting to a Console Terminal or Modem Figur e 3-14 Connecting the USB.
3-20 Cisco 2010 Connected Grid Router Hardware Installa tion Guide OL-31454-01 Chapter 3 Installing a nd Connecting the Ro uter Connecting to a Console Terminal or Mod em Step 3 Enter the follo wing commands to fi nd the OS X USB port number: macbook:user$ cd /dev macbook:user$ ls -ltr /dev/*usb* crw-rw-rw- 1 root wheel 9, 66 Apr 1 16:46 tty.
3-21 Cisco 2010 Connected Grid Router Ha rdware Installation Guide OL-31454-01 Chapter 3 Installin g and Connecting the Router Installing the Cisco Microso ft Windows USB Device Driver Installing the .
3-22 Cisco 2010 Connected Grid Router Hardware Installa tion Guide OL-31454-01 Chapter 3 Installing a nd Connecting the Ro uter Uninstalling the Cisco Microsoft Windows USB Driver Installing the Cisco Microsoft Windows Vista USB Driver This procedure sho ws how to inst all the Microsoft W indo ws V ista USB dri ver .
3-23 Cisco 2010 Connected Grid Router Ha rdware Installation Guide OL-31454-01 Chapter 3 Installin g and Connecting the Router Uninstalling the Cisco M i crosoft Windows USB Driver Using the Setup.exe Program Note Disconne ct the router cons ole termin al before uninstalling the dri ver .
3-24 Cisco 2010 Connected Grid Router Hardware Installa tion Guide OL-31454-01 Chapter 3 Installing a nd Connecting the Ro uter Connecting to the Auxiliary Port Connecting to the Auxiliary Port When a modem is connected to the auxiliary port, a remote user ca n di al in to the router and configure it.
3-25 Cisco 2010 Connected Grid Router Ha rdware Installation Guide OL-31454-01 Chapter 3 Installin g and Connecting the Router Connecting WAN and LAN Interfaces Connecting WAN and LAN Interfaces This section descri bes ho w to connect W AN and LAN interface cables.
3-26 Cisco 2010 Connected Grid Router Hardware Installa tion Guide OL-31454-01 Chapter 3 Installing a nd Connecting the Ro uter Auxiliary Port, Console Port, and Adap ter Pinouts for the Cisco CGR 2010 Router Ports and Cabling Ta b l e 3 - 3 summarizes typical W AN and LAN connections for Cisco CGR 2010 routers.
3-27 Cisco 2010 Connected Grid Router Ha rdware Installation Guide OL-31454-01 Chapter 3 Installin g and Connecting the Router Auxiliary Port, Console Port, and Adapter Pinouts for the Cisco CGR 2010 Router Ta b l e 3 - 5 sho ws the auxiliary po rt pinouts for the RJ-45 conn ector .
3-28 Cisco 2010 Connected Grid Router Hardware Installa tion Guide OL-31454-01 Chapter 3 Installing a nd Connecting the Ro uter Auxiliary Port, Console Port, and Adap ter Pinouts for the Cisco CGR 201.
3-29 Cisco 2010 Connected Grid Router Ha rdware Installation Guide OL-31454-01 Chapter 3 Installin g and Connecting the Router Auxiliary Port, Console Port, and Adapter Pinouts for the Cisco CGR 2010 .
3-30 Cisco 2010 Connected Grid Router Hardware Installa tion Guide OL-31454-01 Chapter 3 Installing a nd Connecting the Ro uter Auxiliary Port, Console Port, and Adap ter Pinouts for the Cisco CGR 201.
3-31 Cisco 2010 Connected Grid Router Ha rdware Installation Guide OL-31454-01 Chapter 3 Installin g and Connecting the Router Auxiliary Port, Console Port, and Adapter Pinouts for the Cisco CGR 2010 .
3-32 Cisco 2010 Connected Grid Router Hardware Installa tion Guide OL-31454-01 Chapter 3 Installing a nd Connecting the Ro uter Auxiliary Port, Console Port, and Adap ter Pinouts for the Cisco CGR 201.
3-33 Cisco 2010 Connected Grid Router Ha rdware Installation Guide OL-31454-01 Chapter 3 Installin g and Connecting the Router Connectors and Cabling for the 8-Port Asynchronous/ Synchronou s RS-232 G.
3-34 Cisco 2010 Connected Grid Router Hardware Installa tion Guide OL-31454-01 Chapter 3 Installing a nd Connecting the Ro uter Connectors and Cab ling for the 8-Po rt Asynchronous/ Synchr onous RS-23.
3-35 Cisco 2010 Connected Grid Router Ha rdware Installation Guide OL-31454-01 Chapter 3 Installin g and Connecting the Router Connectors and Cabling for the 8-Port Asynchronous/ Synchronou s RS-232 G.
3-36 Cisco 2010 Connected Grid Router Hardware Installa tion Guide OL-31454-01 Chapter 3 Installing a nd Connecting the Ro uter Connectors and Cab ling for the 8-Po rt Asynchronous/ Synchr onous RS-23.
CH A P T E R 4-1 Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 4 Configuring the Router This document describes ho w to power up the router and perfor m the initial conf ig.
4-2 Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Chapter 4 Configuring the Router Powering up th e Router • Passwords for access control are selected. • IP addresses for the Ethernet and seri al interfaces ha ve been determined.
4-3 Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 Chapter 4 Configuring the Router Performing the Initial Co nfiguration on the Router --- System Configuration Dialog --- At any point you may enter a question mark '?' for help.
4-4 Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Chapter 4 Configuring the Router Performing the Initia l Configuration on the Router Using the Cisco Setup Command Facility The setup command facility pro mpts you to enter the infor mation that is needed to conf igure a router quickly .
4-5 Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 Chapter 4 Configuring the Router Performing the Initial Co nfiguration on the Router Step 4 Enter an enable secret password. This password is encrypted (for more secu rity) and cannot be seen when vie w ing the conf iguration.
4-6 Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Chapter 4 Configuring the Router Performing the Initia l Configuration on the Router ! interface GigabitEthernet0/0 shutdown no ip address ! interface GigabitEthernet0/1 no shutdown ip address 10.
4-7 Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 Chapter 4 Configuring the Router Performing the Initial Co nfiguration on the Router Note If you see the n ext message, it means that no ot her routers were found on the network attached to the port.
4-8 Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Chapter 4 Configuring the Router Performing the Initia l Configuration on the Router Would you like to terminate autoinstall? [yes] Return Se veral messages are di splayed, ending with a line similar to the follo wing: .
4-9 Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 Chapter 4 Configuring the Router Performing the Initial Co nfiguration on the Router 5.
4-10 Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Chapter 4 Configuring the Router Performing the Initia l Configuration on the Router SUMMARY STEPS 1. enable 2. conf igure terminal 3. enable password passwor d 4. enable secret passw or d 5.
4-11 Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 Chapter 4 Configuring the Router Performing the Initial Co nfiguration on the Router Configuring the Console Idle Privileged EXEC Timeout This section describes ho w to conf igure the console li ne idl e pri vileg ed EXEC timeout.
4-12 Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Chapter 4 Configuring the Router Performing the Initia l Configuration on the Router Examples The follo wing e xample sho .
4-13 Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 Chapter 4 Configuring the Router Performing the Initial Co nfiguration on the Router DETAILED ST EPS Command or Action Purpose Step 1 enable Example: Router> enable Enables priv ileged EXEC mode.
4-14 Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Chapter 4 Configuring the Router Performing the Initia l Configuration on the Router Examples Configuring the GigabitEthernet Interface: Example ! interface GigabitEthernet0/0 description GE int to HR group ip address 172.
4-15 Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 Chapter 4 Configuring the Router Performing the Initial Co nfiguration on the Router Default Routes A router might not be able to determin e the routes to all other netw orks.
4-16 Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Chapter 4 Configuring the Router Performing the Initia l Configuration on the Router 6. end 7. show ip r oute DETAILED ST EPS Command or Action Purpose Step 1 enable Example: Router> enable Enables priv ileged EXEC mode.
4-17 Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 Chapter 4 Configuring the Router Performing the Initial Co nfiguration on the Router Examples Specifying a Default Route: Example ! ip routing ! ip route 192.168.24.0 255.255.
4-18 Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Chapter 4 Configuring the Router Performing the Initia l Configuration on the Router 4. password passwor d 5. login 6. end 7. show running-conf ig 8. From another network de vice, attempt to open a T elnet session to the router .
4-19 Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 Chapter 4 Configuring the Router Performing the Initial Co nfiguration on the Router Examples The follo wing e xample sho.
4-20 Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Chapter 4 Configuring the Router Performing the Initia l Configuration on the Router DETAILED ST EPS Verifying Network Connectivity This section descri bes ho w to verify n etwork connect i vity for your router .
4-21 Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 Chapter 4 Configuring the Router Performing the Initial Co nfiguration on the Router DETAILED ST EPS Examples The follo wing displa y sho ws sample output for the ping command wh en you ping the IP address 192.
4-22 Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Chapter 4 Configuring the Router Performing the Initia l Configuration on the Router The follo wing display sho ws sample output for the ping command when you pi ng the IP hostname donald: Router# ping donald Type escape sequence to abort.
4-23 Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 Chapter 4 Configuring the Router Performing the Initial Co nfiguration on the Router DETAILED ST EPS Examples Copying the.
4-24 Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Chapter 4 Configuring the Router Verifying the In itial Configuration Router# show {flash0|flash1}: System flash directory.
CH A P T E R 5-1 Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 5 Installing and Upgradi ng Internal Modules This document describes ho w to install and upgrade intern al mo.
5-2 Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Chapter 5 Installing and Upgrading Internal Mo dules Safety Warnings Safety Warnings War ni n g Only trained and qualified pe rsonnel should be allowed to install, replace, or service this equipment.
5-3 Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 Chapter 5 Installing a nd Upgrading Internal Modules Removing and Installing Compact Flash Memory Cards Removing a Compact.
5-4 Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Chapter 5 Installing and Upgrading Internal Mo dules Removing and Installing Compact Flash Memory Cards Figur e 5-2 Removing the Compact Flash Cov er Step 2 Press the ejector b utton ne xt to the compact flash memory card .
5-5 Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 Chapter 5 Installing a nd Upgrading Internal Modules Removing and Installing Compact Flash Memory Cards Figure 5-3 Compa ct Flash Memory Card Slot in Cisco CGR 20 1 0 Step 3 Press the ejector button again (see Figure 5 -3 ).
5-6 Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Chapter 5 Installing and Upgrading Internal Mo dules Installing SFP Modules Note If the ejector b utton is projecting from .
5-7 Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 Chapter 5 Installing a nd Upgrading Internal Modules Installing SFP Module s Figure 5-4 Installin g an SFP Module Caution Do not remov e the optical port plugs from th e SFP until you are ready to connect cabling.
5-8 Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Chapter 5 Installing and Upgrading Internal Mo dules Installing SFP Modules Figur e 5-5 Disconnecting SFP Latc h Mechanisms Ti p Use a pen, screwdri ver , or other smal l straight tool to gently r elease a bale-cla sp handle if you cannot reach it with you r fingers.
5-9 Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 Chapter 5 Installing a nd Upgrading Internal Modules Installing Grid Router WAN Interface Cards Installing Grid Router WAN Interface Cards This section descri bes ho w to install grid r out er W AN interface cards (GR WIC) in Cisco CGR 2010 routers.
5-10 Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Chapter 5 Installing and Upgrading Internal Mo dules Installing Grid Rout er WAN Interface Cards Figur e 5-7 Proper Installation of Multiple GR WICs Step 2 T ighten the three captiv e scre ws on the front of the interface card.
5-11 Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 Chapter 5 Installing a nd Upgrading Internal Modules Installing Grid Router WAN Interface Cards Figure 5-9 Removing the Slot Divider F r om the CGR 20 1 0 Rout er Step 3 Stand the GR WIC on end to install it in to the Cisco CGR 2010 router slot (see Figu re 5-10 ).
5-12 Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Chapter 5 Installing and Upgrading Internal Mo dules Installing Grid Rout er WAN Interface Cards Step 4 Grasp the handles .
5-13 Cisco 2010 Connected Grid Router Hardware Installation Gu ide OL-31454-01 Chapter 5 Installing a nd Upgrading Internal Modules Installing Grid Router WAN Interface Cards Figure 5-12 The Doub le-W.
5-14 Cisco 2010 Connected Grid Router Hardware Installation Guide OL-31454-01 Chapter 5 Installing and Upgrading Internal Mo dules Installing Grid Rout er WAN Interface Cards.
An important point after buying a device Cisco Systems OL-31454-01 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco Systems OL-31454-01 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco Systems OL-31454-01 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco Systems OL-31454-01 you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco Systems OL-31454-01 will certainly help you make a decision on the purchase.
If you already are a holder of Cisco Systems OL-31454-01, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco Systems OL-31454-01.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco Systems OL-31454-01. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco Systems OL-31454-01 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
