Instruction/ maintenance manual of the product OL-12397-13 Cisco Systems
Go to page of 34
CH A P T E R 2-1 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 2 SIP Subscribers Revised: April 1 7, 2008, OL-123 97-13 The Cisco BTS 10200 Softswitch su pports SIP subscr ibers on SI P phones that are comp liant with RFC 3261 or RFC 25 43.
2-2 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP Phone Initialization SIP Phone Initialization Figure 2-1 sho ws an example of SIP phone i nitialization on bootup, that is, ho w a typical phone might initialize itself an d establish its identit y with the BTS 10200.
2-3 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP Registration and Security When a SIP user attempts to regist er or set u p a call, the BTS 10200 challenges th e SIP subscribe r based on provisio ning in the Serving Domain Name table.
2-4 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP Registration and Security T o enable or disable SECURE_FQDN on a successful registered subscriber 1. T ake A OR out of service to re mo ve all registered contact.
2-5 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP Registration and Security • The SECURE_FQDN in the A OR2SUB table is stored both in the OR A CLE da tabase and the shared memory .
2-6 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP Registration and Security change aor2sub aor-id=241-555-1018@s ia-SYS41CA146.ipclab.cisco.com; status=ins; Step 4 Reboot the ad apter device (such as A T A) for this subscr iber .
2-7 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP Registration and Security Call Processing The SIP application in the BTS 10200 implements the secure provisio ning feature for all incoming SIP messages (requests and responses) fro m SIP endpoints.
2-8 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP Registration and Security 2. When a Contact header is pres en t on a reliable 1xx or 2xx response, the Contact FQDN/I P address of the response is verif ied to resolve to the Secure-IP1.
2-9 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP User Authentication SIP User Authentication The BTS 10200 can act as an authenti cation server . Authentication is en abled on the serving domain through pr ovisioning.
2-10 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP Subscriber Calls Figure 2-2 sho ws how an inco ming request is processed, and indicates the role of the Aut hentication Service in the BTS 1 0200.
2-11 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Provisioning Session Timers for SIP Su bscribers Provisioning Session Timers for SIP Subscribers The system uses session timers to peri odically refresh SIP sessions during cal l processing or in-progress calls.
2-12 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Diversion Indication for SIP Subs cribers Step 2 If not already d one, add a defau.
2-13 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Comparison of SIP-Based Features and MGCP-Based Features Comparison of SIP-Based .
2-14 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Comparison of SIP-Based Features and MGCP-Based Fe atures Call Fo rward Busy 1 CFB Same as MGCP . Call Fo rward Busy V ariable Ac tiv ation CFBV A Single-stage digit collection.
2-15 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Comparison of SIP-Based Features and MGCP-Based Features Call W aiting Delu xe Interrogation CWDI V aries with phon e functionality .
2-16 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Comparison of SIP-Based Features and MGCP-Based Fe atures Distincti ve Ringing Call W aiting DRCW Provisioning for SIP does not differ from provisioning for MGCP .
2-17 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Comparison of SIP-Based Features and MGCP-Based Features Outgoing Call Barrin g Acti vation OCB A Single stage digit collection. Outgoing Call Barrin g Deactiv ation OCBD Single stage digit collection.
2-18 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softswitch-Based Features Cisco BTS 10200 Softswitch-Based Features Softswitch-based features are di rectly provided b y the BTS 10200.
2-19 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softsw itch-Based Features Call Forwarding The differences between the feature for SIP and the feature for MGCP are as follo ws: • There is no tone prov ided for SIP users to prompt for forwarding digi ts.
2-20 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softswitch-Based Features Note Forward ing to a URL address of record ( A OR) is not supported. SIP subscribers do not hear a f inal dial tone upon completing acti v ation or deacti vation.
2-21 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softsw itch-Based Features • If the calling number and name are.
2-22 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softswitch-Based Features Direct Outward Dialing W ith the Direct O utward Dialing (DOD) service, a s tat ion user can place external calls to the e xchange network with out attend ant assista nce by: 1.
2-23 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softsw itch-Based Features E.164 and Centrex Dialing Plan (Extension Dialing) The system supports E.164 and Cent rex Dialing Plan (extension d ialing) addressing from SIP subscribers served b y the local BTS 10200.
2-24 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softswitch-Based Features Planning VSCs In Networks with SIP Subscribers. Some features require SIP subscriber to enter a se ri es of numbers and characters on the SIP client or handset.
2-25 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softsw itch-Based Features • Call forwardi ng on no answer v ar.
2-26 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softswitch-Based Features Whene ver a change in VM status oc curs .
2-27 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softsw itch-Based Features Note For general VM pro vis ioning details, see “Pro visioning V oice Mail” in the C isco BTS 10200 Soft switch Pr ovisioning Guide .
2-28 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softswitch-Based Features Step 8 If your VM serv er does not support FQDN hostn ames, you must pro vision a serving-domain- name record in the BTS 10200 us ing the IP addresses resolv ed from the sia-xxxCAnnn.
2-29 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Jointly Provided Features The follo wing provisioning steps il lustrate how to pro vide VM service for BTS 10200 Centrex subscribers across multip le Centrex gro ups.
2-30 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Jointly Provided Features Provisionin g in this conte x t refers to feature acti vati on or deacti vation, and setting an y applicable directory n umbers (DNs) associat ed with the feature.
2-31 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Jointly Provided Features Number: Call-Fwd Uncondition al Activ a te/Deactivate F.
2-32 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Phone-Based Fe atures Distinctive Ringing Distincti ve ringing uses a special ringing pattern to alert the called user of i ncoming calls from preselected telephone numbers.
2-33 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Phone-Based Features For features (such as DND) that are av ailable in dependently on the phones and the BTS 10200, you can provision either de vice to enable the feature.
2-34 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Phone-Based Fe atures.
An important point after buying a device Cisco Systems OL-12397-13 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco Systems OL-12397-13 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco Systems OL-12397-13 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco Systems OL-12397-13 you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco Systems OL-12397-13 will certainly help you make a decision on the purchase.
If you already are a holder of Cisco Systems OL-12397-13, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco Systems OL-12397-13.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco Systems OL-12397-13. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco Systems OL-12397-13 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
