Instruction/ maintenance manual of the product IE2100 Cisco Systems
Go to page of 12
CHAPTER 2-1 Cisco Intelligence Engine 2100 Series Configuration Registrar Manual OL-1570-01 2 Preparing for Installation This chapter describes the safety instructions and site requirements needed for installing the IE2100 Series device and guides you through installation preparation.
2-2 Cisco Intelligence Engine 2100 Series Configuration Registrar Manual OL-1570-01 Chapter 2 Preparing for Installation Safety Warning Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor .
2-3 Cisco Intelligence Engine 2100 Series Configuration Registrar Manual OL-1570-01 Chapter 2 Preparing for Installation Safety Warning The ports labeled “10BaseT”, “100BaseTX”, and “10/100” are safety extra-low voltage (SELV) circuits. SEL V circuits should only be connected to other SEL V circuits.
2-4 Cisco Intelligence Engine 2100 Series Configuration Registrar Manual OL-1570-01 Chapter 2 Preparing for Installation Preparing Your Site for Installation Preventing Damage from Electrostatic Discharge Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry .
2-5 Cisco Intelligence Engine 2100 Series Configuration Registrar Manual OL-1570-01 Chapter 2 Preparing for Installation Preparing Your Site for Installation • Always follo w the ESD-pre vention procedures described in the section “ Pre venting Damage from Electrostatic Discharge ” to a void damage to equipment.
2-6 Cisco Intelligence Engine 2100 Series Configuration Registrar Manual OL-1570-01 Chapter 2 Preparing for Installation Preparing Your Site for Installation AC Power • The system is designed for connection to TN power systems. A TN po wer system is a po wer distribution system with one point connected directly to earth (ground).
2-7 Cisco Intelligence Engine 2100 Series Configuration Registrar Manual OL-1570-01 Chapter 2 Preparing for Installation Preparing Your Site for Installation The Ethernet conf iguration using unshield.
2-8 Cisco Intelligence Engine 2100 Series Configuration Registrar Manual OL-1570-01 Chapter 2 Preparing for Installation Preparing Your Site for Installation Console Cable and Adapter The EIA/TIA-232 console port on the IE2100 Series is conf igured as data terminal equipment (DTE) and uses an RJ-45 connector .
2-9 Cisco Intelligence Engine 2100 Series Configuration Registrar Manual OL-1570-01 Chapter 2 Preparing for Installation Rack-Mounting the System Figur e 2-1 Identifying a Rollov er Cable Rack-Mounting the System A rack-mount kit is included for mounting the IE2100 Series in a standard 19-inch equipment rack with two unobstructed outer posts.
2-10 Cisco Intelligence Engine 2100 Series Configuration Registrar Manual OL-1570-01 Chapter 2 Preparing for Installation Required Tools and Equipment • A void placing the system in an o verly congested rack or directly next to another equipment rack.
2-11 Cisco Intelligence Engine 2100 Series Configuration Registrar Manual OL-1570-01 Chapter 2 Preparing for Installation Accessory Kit • Ethernet cables • If you are installing the chassis in a r.
2-12 Cisco Intelligence Engine 2100 Series Configuration Registrar Manual OL-1570-01 Chapter 2 Preparing for Installation Accessory Kit.
An important point after buying a device Cisco Systems IE2100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco Systems IE2100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco Systems IE2100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco Systems IE2100 you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco Systems IE2100 will certainly help you make a decision on the purchase.
If you already are a holder of Cisco Systems IE2100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco Systems IE2100.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco Systems IE2100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco Systems IE2100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center