Instruction/ maintenance manual of the product DHR-1 Cisco Systems
Go to page of 10
DHR-1 Cisco IOS XR Interface and Hardware Co mponent Debug Command Refe rence Hardware Redundancy and Node Administration Debug Commands on Cisco IOS XR Software This chapter describes the admin istra.
Hardware Redundancy and Node Administration Debug Commands on Cisco IOS XR Software debug oird DHR-2 Cisco IOS XR Interfa ce and Hardware Component Debug Co mmand Reference debug oird T o deb ug e vents relat ed to the OIR daemon (OIRD), use th e debug oi rd command in EXEC mode.
Hardware Redun dancy and Node Administration Debug Commands on Cisco IOS XR Software debug oird DHR-3 Cisco IOS XR Interface and Hardware Compon ent Debug Command Refe rence RP/0/RP0/CPU0:router# oir_daemon[247]: Card Mask = 400000000000000, Card_present = fffdc000fffffbfd, Card_intr = fbffffdfffffffff.
Hardware Redundancy and Node Administration Debug Commands on Cisco IOS XR Software debug screddrv DHR-4 Cisco IOS XR Interfa ce and Hardware Component Debug Co mmand Reference debug screddrv T o deb ug the screddrv message, use the deb ug screddr v command in EXEC mode.
Hardware Redun dancy and Node Administration Debug Commands on Cisco IOS XR Software debug screddrv DHR-5 Cisco IOS XR Interface and Hardware Compon ent Debug Command Refe rence.
Hardware Redundancy and Node Administration Debug Commands on Cisco IOS XR Software debug socket DHR-6 Cisco IOS XR Interfa ce and Hardware Component Debug Co mmand Reference debug socket T o deb ug the socket libr ary , use the debug socket command in EXEC mode.
Hardware Redun dancy and Node Administration Debug Commands on Cisco IOS XR Software debug socket DHR-7 Cisco IOS XR Interface and Hardware Compon ent Debug Command Refe rence Examples The followi ng .
Hardware Redundancy and Node Administration Debug Commands on Cisco IOS XR Software debug socket DHR-8 Cisco IOS XR Interfa ce and Hardware Component Debug Co mmand Reference 1 15lab-vlan526-hsrp.cisco.com (172.19.72.129) 15 msec RP/0/RP0/CPU0:Aug 16 20:58:34.
Hardware Redun dancy and Node Administration Debug Commands on Cisco IOS XR Software debug socket DHR-9 Cisco IOS XR Interface and Hardware Compon ent Debug Command Refe rence RP/0/RP0/CPU0:Aug 16 20:58:34.509 : udp[316]: Entering: sbe_set_name_packet (elem 0xda3181ff, name 0x8057190, len 16) RP/0/RP0/CPU0:Aug 16 20:58:34.
Hardware Redundancy and Node Administration Debug Commands on Cisco IOS XR Software debug socket DHR-10 Cisco IOS XR Interfa ce and Hardware Component Debug Co mmand Reference.
An important point after buying a device Cisco Systems DHR-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco Systems DHR-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco Systems DHR-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco Systems DHR-1 you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco Systems DHR-1 will certainly help you make a decision on the purchase.
If you already are a holder of Cisco Systems DHR-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco Systems DHR-1.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco Systems DHR-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco Systems DHR-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
