Instruction/ maintenance manual of the product 1417 Cisco Systems
Go to page of 8
Quick Start Guide I NST ALLING Y OUR C ISCO 1417 R OUTER U NP ACK THE B OX I NST ALL THE R OUTER V ERIFY Y OUR I NST ALLA TION Cisco 1407/1417 Hub PC PC Internet ADSL connection PC PC PC PC Server Ser.
2 Unpack the Box When you unpack the box that contains your Cisco 1417 router , you should find the items shown below . If you did not receive everything shown here, contact your Cisco reseller . Items Y ou Must Provide • 10BaseT Ethernet hub or switch to connect the router to the local network.
3 Install the Router A. Connect the router to the local network Use the included yellow Ethernet cable for connecting the router to the local Ethernet network. For more information on this cable, refer to the “Cabling Specifications” chapter in the hardware installation guide that came with the router .
4 Install the Router (continued) B. Connect the router to the ADSL line Use the included purple ADSL cable for connecting the router to the ADSL line. Step 1 Connect one end of the purple cable to the purple ADSL port on the router . Step 2 Connect the other end of the purple cable to the ADSL wall jack.
5 Install the Router (continued) C. Connect a PC to the router T o use Cisco IOS software to configure the router , it must be connected to a terminal or to a PC with terminal-emulation software. T erminal-emulation software should be configured with the following settings: 9600 baud, 8 data bits, no parity bits, and 1 stop bit.
6 Install the Router (continued) D. Connect the power cord Step 1 Connect the power -supply cord to the power socket on the rear panel. Step 2 Connect the other end of the cord to a power outlet. Step 3 T urn on the router by pressing the power switch to the on ( | ) position.
7 V erify Y our Installation. After the router is powered up, the following LEDs confirm that you have correctly installed your router . For More Information For more information about installing or .
Corporate Headquarters Cisco Systems, Inc. 170 W est T asman Drive San Jose, CA 95134-1706 USA http://www .cisco.com T el: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100 European Headquarters Cisco Systems Europe s.a.r .l. Parc Evolic, Batiment L1/L2 16 A venue du Quebec V illebon, BP 706 91961 Courtaboeuf Cedex France http://www-europe.
An important point after buying a device Cisco Systems 1417 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco Systems 1417 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco Systems 1417 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco Systems 1417 you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco Systems 1417 will certainly help you make a decision on the purchase.
If you already are a holder of Cisco Systems 1417, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco Systems 1417.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco Systems 1417. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco Systems 1417 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
