Instruction/ maintenance manual of the product 10000 Series Cisco Systems
Go to page of 14
Corporate Headquarters: © 20 06 Cisco Syst ems, Inc. All rights reserved. Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA Upgrading to Cisco IOS Release 12.2(28)SB on a Cisco 10000 Series Router This document describes h ow to upgrade a Cisco 100 00 series rout er to Cisco IOS Release 12 .
2 Upgrading to Cisco IOS Release 12.2(28 )SB on a Cisco 10000 Series Router OL-8833-01 Upgrade Paths and Compatibility Upgrade Paths and Compatibility Ta b l e 1 shows the u pgrade procedure options matched to the starting ESR-PRE v ersion and Cisco I OS release.
3 Upgrading to Cisco IOS Release 12.2(28) SB on a Cisco 10000 Series Router OL-8833-01 Upgrade Option 1: ESR-PRE1 Upgrade with Cold Start T o perform th e upgrade, foll o w these ste ps: Step 1 On the activ e ESR-PRE1, issue the write memory command to make sure the startup conf igurati on is up to date.
4 Upgrading to Cisco IOS Release 12.2(28 )SB on a Cisco 10000 Series Router OL-8833-01 Upgrade Option 2: ESR-PRE2 Up grade with Cold Start Upgrade Option 2: ESR-PRE2 Upgrade with Cold Start This proce.
5 Upgrading to Cisco IOS Release 12.2(28) SB on a Cisco 10000 Series Router OL-8833-01 Upgrade Option 3: ESR-PRE1 Upgrade with RPR Switchover At this point, the sy stem should b e operating as a dual-PRE redundan t 12.2(28)SB system in the confi gured mode (either SSO or RPR+), running the properly modif ied start up conf iguration.
6 Upgrading to Cisco IOS Release 12.2(28 )SB on a Cisco 10000 Series Router OL-8833-01 Upgrade Option 3: ESR-PRE 1 Upgrade with RPR Switchov er T o perform the upgrade, follo w these steps: Step 1 On the activ e ESR-PRE1, issue the write memory command to make sure the startup config uration is up to date.
7 Upgrading to Cisco IOS Release 12.2(28) SB on a Cisco 10000 Series Router OL-8833-01 Upgrade Option 3: ESR-PRE1 Upgrade with RPR Switchover • If the ESR-PRE1 conf ig-re gister is set to 0x0, it will boot to R OM monitor . Boot the ESR-PRE1 image from R OM monitor and wait for to come up as standb y in RPR mode wi th the console disabled.
8 Upgrading to Cisco IOS Release 12.2(28 )SB on a Cisco 10000 Series Router OL-8833-01 Upgrade Option 4: ESR-PRE 2 Upgrade with RPR Switchov er Step 3 Insert the second ESR-P RE1 into the empty slot. If it is not conf ig ured for autoboot, boot the correct image from the R OM monitor prompt.
9 Upgrading to Cisco IOS Release 12.2(28) SB on a Cisco 10000 Series Router OL-8833-01 Obtaining Documentation Step 7 On the acti ve ESR-PRE2 in pri vile ged EXEC mode, enter the hw-module sec-cpu r eset command to reboot the standb y ESR-PRE2. This will load the 12.
10 Upgrading to Cisco IOS Release 12.2(28 )SB on a Cisco 10000 Series Router OL-8833-01 Documentation Fe edback Cisco.com Y ou can access the most current Ci sco documentation at this URL: http://www .cisco.co m/techsupport Y ou can access the Cisco website at this URL: http://www .
11 Upgrading to Cisco IOS Release 12.2(28) SB on a Cisco 10000 Series Router OL-8833-01 Cisco Product Security Overview Y o u can submit comments b y using th e response card (if present) behin d the .
12 Upgrading to Cisco IOS Release 12.2(28 )SB on a Cisco 10000 Series Router OL-8833-01 Obtaining Technica l Assistance at this URL: http://www .cisco.co m/en/US/products/products_ security_vulnerabilit y_polic y .html The link on this page has the curr ent PGP k ey ID in use.
13 Upgrading to Cisco IOS Release 12.2(28) SB on a Cisco 10000 Series Router OL-8833-01 Obtaining Additional Publ ications and Information For S1 or S2 service requests or if you do not have Internet access, co ntact the Cisco T A C b y telephone.
14 Upgrading to Cisco IOS Release 12.2(28 )SB on a Cisco 10000 Series Router OL-8833-01 Obtaining Additional Pub lications and Information • iQ Magazine is the quarterly pub lication from Ci sco Systems design ed to help gro wing companies learn ho w they can use techn ology to increase re v enue, streamline their b usiness, an d expand services.
An important point after buying a device Cisco Systems 10000 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco Systems 10000 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco Systems 10000 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco Systems 10000 Series you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco Systems 10000 Series will certainly help you make a decision on the purchase.
If you already are a holder of Cisco Systems 10000 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco Systems 10000 Series.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco Systems 10000 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco Systems 10000 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
