Instruction/ maintenance manual of the product TR-1 Cingular
Go to page of 16
1 Personal Tracking System User Manual Copyright 2007 www. itrekgps.com.
2 List of Contents Introduction 3 Package Contents 3 GPS / GSM Tracker 4 Bluetooth Decoder 5 Setting up GPS / GSM Tracker 6 Tracking with Bluetooth Decoder 8 Tracking without Bluetooth Decoder 10 FAQs.
3 Introduction Thank you for purchasing i.Trek TR-1, a real time tracking system based on GPS and GSM technology. Unlike traditional tracker, TR-1 does not rely on call center or Internet to operate. There is no monthly fee to pay and your privacy is completely protected.
4 GPS/GSM Tracker Power Button Press the power button to turn on / off the GPS tracker Battery LED Red – Battery low and requires charge Green – The battery is fully charged Orange – The battery.
5 Bluetooth Decoder (1) GPS LED Flashing orange – The GPS is searching for satellites Solid orange – The GPS position has fixed (2) Decoder LED Flashing red (4 sec.
6 Setting up GPS / GSM Tracker 1. SIM Card Installation SIM card slot is located inside the battery cabinet. Please open the battery cover underneath the tracker to locate SIM card slot. If the battery is already installed, please remove the battery to reveal the SIM card slot.
7 Setting up GPS / GSM Tracker (Cont.) 3. Switch On Press the power button to switch on TR-1 tracker. Please make sure the GPS LED is flashing indicating it is getting a fix from the satellites. This may take 1 – 2 minutes when you use the tracker for the first time.
8 Tracking with Bluetooth Decoder 1. Establish connection between Tracker and Bluetooth Decoder From a telephone or mobile phone, dial the phone number of the SIM card inside the tracker. Connect your phone to the decoder by placing the decoder microphone on the phone speaker.
9 Tracking with Bluetooth Decoder (Cont.) 6. Using i.Trek Real Time Tracking software (1) Current Location – Display current location of the tracker (2) Starting Location – Display starting locati.
10 Tracking without Bluetooth Decoder It is also possible to locate the tracker without Bluetooth decoder. In this case, the data will be sent to your mobile phone as short text message. From a mobile phone, dial the phone number of the SIM card inside TR-1 tracker to establish a connection.
11 FAQs and Troubleshooting Is there a monthly fee for using i.Trek TR-1 Personal Tracking System? There is no additional fee for using I.Trek TR-1 Tracking System besides your regular phone call charge.
12 Appendix 1: Technical Specifications Antenna Receiver Frequency: 1575.42 MHz (L1 band) C/A code Antenna Type: Built-in Active Antenna with MMCX external antenna jack GPS Receiver Technology: SiRF S.
13 Appendix 2: Setup SOS Dial Back Number TR-1 Tracker can report current position via SMS to pre-set phone numbers by press the SOS button. Setup the SOS dial back numbers: 1. Dial to TR-1 tracker and establish a connection. 2. Press * and press default pass code 0000 .
14 Appendix 3: Pairing Bluetooth Decoder to a Computer The instruction is provided as a general guideline. The steps may be different on your particular device. Please refer to user manual of each device for more detailed information. Windows with XP Bluetooth Manager 1.
15 Appendix 4: Pairing Bluetooth Decoder to a PDA The instruction is provided as a general guideline. The steps may be different on your particular device. Please refer to user manual of each device for more detailed information. Pocket PC WM2003/WM2003SE * Make sure Bluetooth is enabled on the Pocket PC.
16 Appendix 5: Pairing Bluetooth Decoder to a SmartPhone The instruction is provided as a general guideline. The steps may be different on your particular device. Please refer to user manual of each device for more detailed information. Windows Mobile 2003 SmartPhone Configure Bluetooth Serial COM Port • Turn on Bluetooth GPS.
An important point after buying a device Cingular TR-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cingular TR-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cingular TR-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cingular TR-1 you will learn all the available features of the product, as well as information on its operation. The information that you get Cingular TR-1 will certainly help you make a decision on the purchase.
If you already are a holder of Cingular TR-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cingular TR-1.
However, one of the most important roles played by the user manual is to help in solving problems with Cingular TR-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cingular TR-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
