Instruction/ maintenance manual of the product EVCM-100D Chief Manufacturing
Go to page of 3
CHIEF MANUFACTURING INC. 1-800- 582-6480, Fax: 1-877-894- 6918, Email: chief@chief mfg.com Page 1 of 3 8808-000006 Rev A INSTALLATION INSTRUCTIONS EVCM-100D Magna Lift™ Electric Ceiling Mount Prior to assembly, unpack carton completely and verify contents.
Page 2 of 3 1. Thread Locking Screw 6. Adapter Plate 2. Power Inlet 7. Hanging Bracket Bolts 3. (4x) Locking Hasp 8. Pitch Adjustment Bolts 4. Power Switch 9. Adjustment 5. Rocker/Control Switch 10. Adjustment Nuts 4. Using the appropriate power cord, provide power to the EVCM-100.
Page 3 of 3 8. Before raising projector to ceiling, make sure all fasteners are se curely tightened to the projector and the adapter plate. 9. Raise unit to ceiling as follows: A Depress and hold the arrow side of rocker/c ontrol switch [Figure 1, Item (5)] until the adapter plate is seated to the ceiling mount housing.
An important point after buying a device Chief Manufacturing EVCM-100D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chief Manufacturing EVCM-100D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chief Manufacturing EVCM-100D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chief Manufacturing EVCM-100D you will learn all the available features of the product, as well as information on its operation. The information that you get Chief Manufacturing EVCM-100D will certainly help you make a decision on the purchase.
If you already are a holder of Chief Manufacturing EVCM-100D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chief Manufacturing EVCM-100D.
However, one of the most important roles played by the user manual is to help in solving problems with Chief Manufacturing EVCM-100D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chief Manufacturing EVCM-100D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
