Instruction/ maintenance manual of the product 04328 Chicago Electric
Go to page of 14
SOLDERING GUN KIT 180 W A TT WITH LIGHT Model 04328 ASSEMBL Y AND OPERA TING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 9301 1 Visit our W eb site at: http://www .harborfreight.com Copyright 2003 by Harbor Freight T ools ® . All rights reserved.
PRODUCT SPECIFICA TIONS .
ELECTRICAL SAFETY 4. Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in any way . Do not use any adapter plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded.
12. A void accidental starting. Be sure the Power Switch is off before plugging in. Carrying power tools with your finger on the Power Switch, or plugging in power tools with the Power Switch on, invites accidents. 13. Remove adjusting keys or wrenches before turning the power tool on.
23. Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool. SERVICE 24. T ool service must be performed only by qualified repair personnel.
8. Connect tool to properly grounded outlets. Caution: T o provide continued protection against risk of electric shock, connect to properly grounded outlets only . Do not immerse the Soldering Gun in water . 9. Use of any accessory or attachment other then those mentioned in the manual may result in personal injury and/or property damage.
GROUNDING W ARNING! Improperly connecting the grounding wire can result in the risk of electric shock. Check with a qualfified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool.
FIGURE B SKU 04328 P AGE 8 DOUBLE INSULA TED TOOLS: T OOLS WITH TWO PRONG PLUGS 4. T ools marked “Double Insulated” do not require grounding. They have a special double insulation system which satisfies OSHA requirements and complies with the applicable standards of Underwriters Laboratories, Inc.
6. If you are using an extension cord outdoors, make sure it is marked with the suffix “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use.
UNP ACKING When unpacking, check to make sure all the parts shown on the Parts List on page 13 are included. If any parts are missing or broken, please call Harbor Freight T ools at the number shown on the cover of this manual as soon as possible.
SKU 04328 P AGE 1 1 Preparing the Metal to be Soldered 1 . If wires are to be soldered, thoroughly clean or scrape the wires so that only the clean copper is showing. Make the wire splice. 2 . If other metals are to be soldered, thoroughly clean or scrape the metal surfaces.
SKU 04328 P AGE 12 INSPECTION, MAINTENANCE, AND CLEANING 1. W ARNING! Make sure the Power Switch (part #) of the Soldering Gun is in its “OFF” position and that the tool is unplugged from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
SKU 04328 P AGE 13 PLEASE READ THE FOLLOWING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUT OR HAS PROVIDED THE P AR TS LIST AND ASSEMBL Y DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONL Y .
SKU 04328 P AGE 14 NOTE: Some parts are listed and shown for illustration purposes only , and are not available individually as replacement parts. ASSEMBL Y DIAGRAM.
An important point after buying a device Chicago Electric 04328 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chicago Electric 04328 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chicago Electric 04328 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chicago Electric 04328 you will learn all the available features of the product, as well as information on its operation. The information that you get Chicago Electric 04328 will certainly help you make a decision on the purchase.
If you already are a holder of Chicago Electric 04328, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chicago Electric 04328.
However, one of the most important roles played by the user manual is to help in solving problems with Chicago Electric 04328. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chicago Electric 04328 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
