Instruction/ maintenance manual of the product WOODBURNER Charnwood
Go to page of 7
Operating and Installation Instructions CHARNWOOD COUNTRY 8 & 12 WOODBURNER Bishops Way, Newport, Isle Of Wight, PO3O 5WS, U.K. Tel: (01983) 527552 Fax: (01983) 821267.
Before lighting the stove check with the installer that the work and checks described in the Installation Instructions have been carried out correctly and that the chimney has been swept, is sound and free from any obstructions. FUELS Wood Wood must be dry and well seasoned.
open for long periods as this can cause over-firing. For overnight burning they should be closed. The airwash control is used most of the time to control the burning rate and to keep the glass clean. Fully extended gives full airwash for faster burning and clean glass whereas fully closed gives slow overnight burning.
swept from the plate and into the fire. Return the throat plate to its correct position - raise the front of the plate, push it back and then lower it onto the retaining lugs.
regulations state that the hearth must extend in front of the stove by at least 300mm (12 inches) and to the sides of the stove by at least 150mm (6 inches). If in doubt as to the positioning of the stove expert advice should be sought either from the supplier or the local building inspector.
FITTING THE OPTIONAL ADD-IN BOILER The boiler replaces the rear firebrick. Before fitting the boiler, remove the front fence, the throat plate and the rear firebrick. Knock out the knock-outs for the boiler tappings in the back of the firebox. Remove the back nuts and washers supplied with the boiler and fit the boiler into the appliance.
chimney to be swept through the stove. Soot doors may either be in the actual brickwork of the chimney or in the register plate. Various positions of soot doors are shown in Figs. 4 to 7. PRE LIGHTING CHECK Ensure that the throat plate is fitted in the roof of the appliance.
An important point after buying a device Charnwood WOODBURNER (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Charnwood WOODBURNER yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Charnwood WOODBURNER - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Charnwood WOODBURNER you will learn all the available features of the product, as well as information on its operation. The information that you get Charnwood WOODBURNER will certainly help you make a decision on the purchase.
If you already are a holder of Charnwood WOODBURNER, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Charnwood WOODBURNER.
However, one of the most important roles played by the user manual is to help in solving problems with Charnwood WOODBURNER. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Charnwood WOODBURNER along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
