EN
Official user manual

CH Tech M206

1 pages·164 KB·Network Card·PDF·ENDEFRITNLJA
CH Tech M206
Table of Contents 1 sections M Module Compliance Complies with ANSI/VITA Std. 121996 for triple-wide MA Modules ShowHide
Page 1 of the CH Tech M206 user manual — M Module Compliance Complies with ANSI/VITA Std. 121996 for triple-wide MA Modules
Page 1 · click to enlarge
Page 1
CH Tech M206 — M Module Compliance Complies with ANSI/VITA Std. 121996 for triple-wide MA Modules diagram (page 1)
Fig. 1 · M Module Compliance Complies with ANSI/VITA Std. 121…
  • C&H Technologies, Inc.
  • 445 Round Rock West Drive
  • Round Rock, TX 78681-5012
  • (512) 733-2621
  • FAX (512) 733-2629
  • <a href="http://www.chtech.com" rel="nofollow noopener" target="_blank">www.chtech.com</a>
CH Tech M206 — M Module Compliance Complies with ANSI/VITA Std. 121996 for triple-wide MA Modules diagram (page 1)
Fig. 2 · M Module Compliance Complies with ANSI/VITA Std. 121…

M206 Pulse Amplifier The M206 is a programmable pulse amplifier that accepts a fixed level input pulse and provides dual complementary switched outputs. The module produces a total of four outputs. Two outputs have the same active-level as the input pulse and two outputs have the complement level of the input pulse. The output level is programmable up to 30V into no load (up to 15V into a 50Ω load). An external +36V supply is required. An external power interlock and a pulse interlock are provided.

Specifications: Outputs: Two true (A & B) and two complement (A & B) outputs Frequency: 20MHz max. Input: TTL Output Amplitude: RLOAD = 50Ω +0.21V to +15V RLOAD = ∞ +0.42V to +30V Output Current: Source 300mA Sink 100mA Output Impedance: 50Ω Programming Resolution: 10V range 2.50mV 30V range 7.50mV Accuracy: ±0.75% ±75mV Rise/Fall Time: 30V, RLOAD = ∞ 30ns

M Module Compliance Complies with ANSI/VITA Std. 121996 for triple-wide MA Modules

Inputs/Outputs: • Pulse Input • True Output A • True Output B • Complement Output A • Complement Output B • External Power (+36V) • External Power Interlock • Pulse Interlock External Power: 36V 2A supply required Front Panel Connectors: Pulse Input/Outputs SMA Ext. Pwr. & Interlocks 9-pin DSUB Temperature: Operating: 0°C to 50°C Storage: -40°C to 70°C Power (typical): +5V 150 mA +12V 300 mA -12V 100 mA Ext. +36V 1.0 A
Data Transfers16 bit
Interruptsnot supported
Triggersnot supported

Compatible with VXI, VME, PCI, cPCI and other M Module carriers.

  • Applications
  • Pulse amplification
  • Pulse level shifting Ordering Information Part Number 11028470-0001 Additional Information User Manuals for C&H carriers and this module can be found on our website at <a href="http://www.chtech.com" rel="nofollow noopener" target="_blank">www.chtech.com</a>
Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the CH Tech M206

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the CH Tech M206

Be the first to ask — other owners or our team will answer.

Original document

CH Tech M206 manual PDF

1 pages·164 KB·Network Card·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…