
Ordering Information
The AM100 provides dual output signal buffering for other C&H IP source modules. The module attaches adjacent to other specially designed C&H IP modules through a 10-pin side connector. One or two output signals form the source IP module are buffered to provide up to + 300ma drive capability that will not oscillate while driving large capacitive loads. The buffers slew at 800V/µs and have a small signal bandwidth of 50 Mhz while driving a 50Ω load. They feature built-in current limiting and thermal shutdown. Output impedance is typically 3Ω.
Description AM100 Buffer IP Accessory
Part Number 11027840-0001
Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.