Instruction/ maintenance manual of the product CIN6 CDA
Go to page of 12
Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshir e • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.
Important The CDA Gr oup Ltd cannot be held responsible for injuries or losses caused by inc orrect use or installation of this product. Please note that CD A reserve the right t o invalidate the guar antee supplied with this product f ollowing incorr ect installation or misuse of the appliance or use in a commer cial envir onment.
Using your Extr actor For best perf ormance, you should switc h on the extractor 1 5 minutes befor e starting to cook and lea ve it to run for appro ximately 1 5 minutes after the end of c ooking.
Car e and Maintenanc e IMPOR T ANT : DO NOT PERFORM MAINTENANCE OR CLEANING OF THE EXTRA CTOR WITHOUT FIRS T SWIT CHING OFF THE ELECTRICITY SUPPL Y . Cleaning Y ou should use a non-abrasiv e cleaner . Any abrasive cleaner (including Cif) will scr atch the surface and could erase the contr ol panel markings.
Changing the Light IMPOR T ANT : DO NOT PERFORM MAINTENANCE OR CLEANING OF THE EXTRA CTOR WITHOUT FIRS T SWIT CHING OFF THE ELECTRICITY SUPPL Y . DO NO T CHANGE THE LIGHT BULB IMMEDIA TEL Y AFTER USE AS THE BULB WILL BE HOT . ALL OW IT T O COOL BEFORE REMO VING IT .
DOUBLE POLE SWIT CHED FUSED SPUR OUTLET USE A 3 AMP FUSE Mains Electricity Connection THIS APPLIANCE MUST BE C ONNECTED T O THE MAINS SUPPL Y BY A C OMPETENT PERSON, USING FIXED WIRING VIA A DOUBLE POLE SWIT CHED FUSED SPUR OUTLET AND PRO TECTED BY A 3A FUSE.
Installation 1 . Mark the positions of the fixing holes on the wall using the dimensions shown in Fig 3. 2. Drill and plug the wall and cabinets with appropriate fixings, suitable for the w all type and units you are fixing the extractor t o. 3. Mount the brackets and secur ely tighten.
Installation When the extractor is t o be installed above an electric hob, the minimum distance betw een the hob and extractor must ex ceed 600mm (650mm is rec ommended). When the extractor is t o be installed above a gas hob, the minimum distance betw een the hob and extractor must ex ceed 700mm (750mm is rec ommended).
.
.
.
Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshir e • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www .cda.eu Passionate about style T o c ontact our Customer Car e Department, or for Service, please contact us on the det ails below .
An important point after buying a device CDA CIN6 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought CDA CIN6 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data CDA CIN6 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, CDA CIN6 you will learn all the available features of the product, as well as information on its operation. The information that you get CDA CIN6 will certainly help you make a decision on the purchase.
If you already are a holder of CDA CIN6, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime CDA CIN6.
However, one of the most important roles played by the user manual is to help in solving problems with CDA CIN6. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device CDA CIN6 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
