Instruction/ maintenance manual of the product CAXM Cavalry
Go to page of 5
Note: T o reduce static discharge, do not assemble while on a carpeted surface. Handle hard drives on the sides only . Do not touch any pins or connectors. Assembl y Guide Thank you for purchasing the CAXH user-congured enclosure! The CAXH enclosure is elegant, cost-effective, and primarily designed to protect your Hard Disk from shock.
Remove the box contents. Put the two panels off to the side. The panel with the circuit board will be refered to as Panel A. The lid will be referred to as Panel B. T ake this moment to count all of the channels on Panel A. Notice that half of them face inwards.
As you place the hard drive into the enclosure, watch the retainer pins on the right side of panel A. Once they have lined-up with the screw-holes on the side of your HDD, push the back end of the drive downwards, into the oor of Panel A.
Now bring Panel B down slowly on top of Panel A. T ake this time to make sure all of the tabs are lined up with the channels that you counted before. Push the longest tabs in halfway rst.
Once all the tabs are lined-up, push down on the entire surface of Panel B until you here the snapping noises of the tabs engaging. Use your thumbs to go around the edges of the enclosure and engage every tab. Don’t be afraid to squeeze the case a little.
An important point after buying a device Cavalry CAXM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cavalry CAXM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cavalry CAXM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cavalry CAXM you will learn all the available features of the product, as well as information on its operation. The information that you get Cavalry CAXM will certainly help you make a decision on the purchase.
If you already are a holder of Cavalry CAXM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cavalry CAXM.
However, one of the most important roles played by the user manual is to help in solving problems with Cavalry CAXM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cavalry CAXM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
