Instruction/ maintenance manual of the product ST-A20 SERIES Toshiba
Go to page of 26
TOSHIBA POS Terminal ST-A20 SERIES Owner's Manual.
CE Compliance (for EU only) This product complies with the requirements of EMC and Low Voltage Directives including their amendments. WARNING This is a Class A product. In a domestic environment this product may cause radi o interference in which case the user may be required to take adequate measures.
Safety Summary EO1-12037 (i) Safety Summary Personal safety in handling or maintaining the equipmen t is extrem ely important. Warnings and Cautions necessary for safe handling are included in this manual. All warnings and cautions contained in this manual should be read and underst ood before handling or maintaining the equipm ent.
Safety Summary EO1-12037 (ii) If foreign objects (metal fragments, water, liquids) enter the machines, first turn off the power switches and disconnect the power cord plugs from the outlet, and then contact your authorized TOSHIBA TEC representative for assistance.
EO1-12037 TABLE OF CONTENTS Page 1. INTRODUCT ION ------------------------------------------------------------------------- 1-1 1.1 Accessories -------------------------------------------------------------------------------- 1-1 2. APPEARANCE --------------------------------------------------------------------------- 2-1 2.
1. INTRODUCTION 1.1 Applicable Model 1-1 EO1-12037 1. INTRODUCTION Thank you for choosing the TOSHIBA POS Terminal. This POS terminal contains all the high performance register functions necessary for a specialty/hospitality POS terminal and enables the user oriented system configuration.
2. APPEARANCE 2. 1 Standard Model 2-1 EO1-12037 2. APPEARANCE 2.1 Standard Model 12-inch display POS terminal 15-inch display POS terminal.
2. APPEARANCE 2. 1 Standard Model 2-2 EO1-12037.
2. APPEARANCE 2. 2 Available Options 2-3 EO1-12037 LED and CONTROL BUTTON DESCRIPTION Power LED (Blue) This is the LED to indicate the power ON/OFF status of the POS terminal. The blue LED is illuminated when the power is ON. HDD LED (Yellow) The yellow LED is illuminated during the access to the hard disk drive.
2. APPEARANCE 2. 2 Available Options 2-4 EO1-12037 2.2 Available Options Wireless Adaptor Case Fixed type customer display BIU Magnetic Card Reader (MCR) Tilt type customer display BIU i Button Remote.
2. APPEARANCE 2.3 Examples of POS Terminal with Some Options 2-5 EO1-12037 2.3 Examples of POS Terminal with Some Options.
2. APPEARANCE 2.4 Connectors 2-6 EO1-12037 2.4 Connectors CAUTION! The drawer interface connector is exclu sively for connecting the drawer. Do not connect a phone line or any other cables than the drawer cable to t his connector. Doing so may cause a failure of the phone line and this terminal.
2. APPEARANCE 2.4 Connectors 2-7 EO1-12037 Connector Description AC inlet A connector for the AC inlet PS/2 (Mouse, Keyboard) Mini-DIN 6- pin female type connector Connector for the PS/2 type mouse, C.
3. INSTALLATION PROCEDURE 3.1 Envir onment for Installation 3-1 EO1-12037 3. INSTALLATION PROCEDURE WARNING! Care must be taken not to get your fingers caught between the LCD Frame and the POS term inal when bending the display downward. CAUTION! When removing the protective film from the display surface, please be sure to do it slowly.
3. INSTALLATION PROCEDURE 3.2 Connecti ng the AC Plug 3-2 EO1-12037 3.2 Connecting the AC Plug 1. Push on both sides of the molded Tower (TWR) Tail Cover to remove it from the system in order to gain access of the AC inlet. 2. Fully insert the Power Cord Plug into the Inlet of the POS terminal.
4. ADJUSTMENT 4.1 Tilt Angle Adjustment 4-1 EO1-12037 4. ADJUSTMENT Tilt angle and brightness of the operator’s display can be adjusted. Adjustment method is common to both of 12-inch display model and 15-inch display model. CAUTION! 1. Do not adjust the display angle by holding the LCD panel.
4. ADJUSTMENT 4.2 Brightness Adjustment 4-2 EO1-12037 4.2 Brightness Adjustment The brightness control is provided on the lower right of the operator’s display. Turning it to the left makes the display darker, and turning it to the right makes the display brighter.
4. ADJUSTMENT 4.3 Volume Adjustment 4-3 EO1-12037 4.3 Volume Adjustment The volume control is provided on the lower right of the tower. Turning it to the left makes the volume lower, and turning it to the right makes the volume higher.
5. MAGNETIC CARD READER (OPTION) 5.1 How to Read Magnetic Card 5-1 EO1-12037 5. MAGNETIC CARD READER (OPTION) The optional magnetic card reader can be installed. 5.1 How to Read Magnetic Card Insert the magnetic card into the upper portion of the magnetic card reader slot and slowly move the card downward.
6. iBUTTON® (OPTION) 6.1 How to Read iButton 6-1 EO1-12037 6. i Button ® (OPTION) The optional i Button unit can be installed on the bottom of the LCD. 6.1 How to Read i Button CAUTION! 1. Keep storage media, like a floppy disk, away from the touch probe.
7. GENERAL MAINTENANCE 7. General Maintenance 7-1 EO1-12037 7. GENERAL MAINTENANCE WARNING! 1. Be sure to disconnect the power cord prior to performing any maintenance. 2. Do not pour water directly on or wipe the operator’s display with a soaked cloth, as this may cause fire, electric shock, or machine failure .
8. TROUBLESHOOTING 8. Troubleshooting 8-1 EO1-12037 8. TROUBLESHOOTING WARNING! If you cannot solve a problem with the following solutions, do not attempt to repair it by yourself.
9. SPECIFICATIONS 9.1 Basic Specifications 9-1 EO1-12037 9. SPECIFICATIONS 9.1 Basic Specifications *: At least a 1GB of system memory is recommended to r un Windows Vista. If the memory is small in capacity, the POS terminal may not function correctly.
9. SPECIFICATIONS 9.2 Options 9-2 EO1-12037 9.2 Options Option Model Description DRWST-51A-4MVK-QM-R DRWST-51A-8MVK-QM-R 24V-drive standard drawer Dimensions and Weight: 460(W) x 400(D) x 115(H) mm / 18.
English Waste Recycling information for users: Following information is only for EU-member states: The crossed out wheeled bin symbol is used to indicate t hat the product must not be tr eated as general household waste.
E EO1-12037.
An important point after buying a device Toshiba ST-A20 SERIES (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba ST-A20 SERIES yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba ST-A20 SERIES - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba ST-A20 SERIES you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba ST-A20 SERIES will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba ST-A20 SERIES, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba ST-A20 SERIES.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba ST-A20 SERIES. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba ST-A20 SERIES along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
