Instruction/ maintenance manual of the product Q900SS Baumatic
Go to page of 24
Q900SS 90 cm Cooker hood.
1 User Manual for your Baumatic Q900SS Cooker Hood 90 cm Chimney Hood in Linen Ste el NOTE : This User Instruction Manual contains imp ortant information, including safety & installation poi nts, which will enable you to get the most out of your appliance.
2 YOUR COOKER HOOD’S SPECIFICATIONS ….……………..………….3 IMPORTANT SAFETY INFO RMATION……………………………….…4-5 CARING FOR THE ENVI RONMENT…………………………………………6 USING YOUR COOKER HOOD……………………………….
3 Congratulations on purchasing a Baumatic Cooker Hood! To fully enjoy using your app liance long into the future, please firstly familiarise yours elf with its specifications, safety advice and operational in structions included in this manual. You will also need this manual to ensure that your Cooker Hood has been installed properly.
Important Safety Information: Please Read this before installing & using. o Any installation work must be carried out by a qualified electrician or competent person. o The hood must be installed in accordance with the installation instructions and all measurements followed.
5 o Ensure the ducting for the extractor function has the same diameter as the outlet hole all the way through. o Keep young children from using, playing with or tampering with the cooker hood. Older children and infirm persons should be supervised if they are using the cooker hood.
6 Note : Before discarding an old appliance, switch off and disconnect it from the power supp ly. Cut off and render any plug useless. Cut the cable off directly behind th e appliance to prevent misuse. This should be under taken by a compet ent person.
7 To use your cooker hood: 1) Make sure it has been properly installed. 2) Find the CONTROL PANEL. It is located at the bottom of the hood on the underside, at the front of the canopy. 3) The CONTROL PANEL contains switches as shown in the Figure below.
8 IMPORTANT! : Before cleaning, always ensure that you have switched your cooker hood OFF at the omni-polar switch, set at the wall from t he cable: Cleaning  Clean the external p arts with mild liquid deterg ents on a damp cloth.  Never use abrasive powder, corrosive solvents or brushes.
9 First remove the grille by pu lling down on it. Undo the side catches. You can now clean the anti -grease filter grilles. 9 Soak them for about one hour in hot water with a grease-loosening detergent then rinse off thoroughly with hot water. 9 Repeat the process if needed .
10 a) Changing the light bulb 9 Before changing the light bulb, ensure th at the appliance is not live (i.e., ensure that you have switched it off so that it’s in the ‘0’ position). 9 Remove the metal anti-grease filters (se e Figure 2 below) and find the old bulb located in the light fixture up inside the exposed canopy.
11 _____________________________________________ _________________________________________ Installing / Changing the Carbon Filter . Your Baumatic Cooker Hood uses CARBON FILT ERS to purify the air for the air recirculation function. You will find two filters t hat will attach to both sides of the fan motor (please see fi gures at bottom of page).
12 Before installation and usage, read all t he instructions and ma ke sure that the voltage (V) and th e frequency (Hz) indicated on the identif ication plate (found inside your Cooker Hood) and all the dat a inside the ap pliance are exactly the same as the voltage and frequency in your home.
13 : The cooker hood must not be fitted above stoves with a radiant top plate. : We recommend that at least two people install this hood. NOTE: Your Baumatic Cooker Hood shou ld only be fitted on a wall. Do NOT position it any less tha n 700 mm (70 cm) above the hob.
14 ------------------ ---------------------------------------- ---------------- 3) Using a drill bit with a 6 mm diameter, make holes in the wall where you have marked these positions (see below).
15 ------------------------------ -------------------------------------------- ----------------- ------------------------------ -------------------------------------------- ----------------- 6) (EXTRACTION F UNCTION ONLY) Conne ct the coupling to the top of the cooker hood (see below).
16 FITTING THE PIPE – Once your Cooker Hood has been installed, you can now fit the pipe. 1) Take the two casing s ‘A’ and ‘B’: 2) Rest the bottom of the casing ‘A’ on the top of the hood, taking care to position the tabs of the casing correctly on the back of the hood as shown as p art ‘X’ in Figure 4 at right.
17 6) Take the fixing bracket ‘G’ (Fig . 4 – prev ious page), centre it with respect to the mark you pr eviously made, keeping it in contact with the ceiling, and then ma rk the a nchoring h oles (‘H’). 7) Using a drill bit with a 6mm di ameter, make two holes on the fixing marks you previously mad e (see below).
.
.
20 If something has gone wrong with your Cooker Hood, checking against this chart might keep you from having to call for service. Symptom Solution The cooker hood will not start! • Check that the hood is connected to the electricity supply. • Check that the fan speed control is set properly.
Baumatic Ltd. Conditions of guarantee Dear Customer, Your new Ba umatic appl iance com es complete wi th a free 12 m onth gua rantee coveri ng both parts and labour costs resulting from defective materials or workmanship.
Headquarters Baumatic Ltd. Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX, United Kingdom Sales Telephone +44 118 933 6900 Sales Fax +44 118 931 0035 Service Telephone +44 118 933 6911 Service Fax +44 118 986 9124 Spares Telephone +44 118 933 6922 Technical / Advice Telephone +44 118 933 6933 E-mail : sales@baumatic.
23.
An important point after buying a device Baumatic Q900SS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Baumatic Q900SS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Baumatic Q900SS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Baumatic Q900SS you will learn all the available features of the product, as well as information on its operation. The information that you get Baumatic Q900SS will certainly help you make a decision on the purchase.
If you already are a holder of Baumatic Q900SS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Baumatic Q900SS.
However, one of the most important roles played by the user manual is to help in solving problems with Baumatic Q900SS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Baumatic Q900SS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
