Instruction/ maintenance manual of the product BT13.1SS Baumatic
Go to page of 20
BT13.1SS Cooker Hood.
1 User Manual for your Baumatic BT13.1SS Cooker Hood NOTE : This User Instruction Man ual contains imp ortant information, including safety & installation points, w hich will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available fo r future reference.
2 YOUR COOKER HOOD’S SPECIFICATIONS ….……………..………….3 IMPORTANT SAFETY INFO RMATION……………………………….…4-5 CARING FOR THE ENVI RONMENT…………………………………………6 USING YOUR COOKER HOOD……………………………….
3 Congratulations on purchasing a Baumatic Cooker Hood! To fully enjoy using your app liance long into the future, please firstly familiarise yours elf with its specifications, safety advice and operational in structions included in this manual. You will also need this manual to ensure that your Cooker Hood has been installed properly.
4 o Any installation work must be carried out by a qualified electrician or competent person. o The hood must be installed in accordance with the installation instructions and all measurements followed.
5 o Ensure the ducting for the extractor function has the same diameter as the outlet hole all the way through. o Keep young children from using, playing with or tampering with the cooker hood. Older children and infirm persons should be supervised if they are using the cooker hood.
6 Note : Before discarding an old appliance, switch off and disconnect it from the power supp ly. Cut off and render any plug useless. Cut the cable off directly behind th e appliance to prevent misuse. This should be under taken by a competent person.
7 To use your cooker hood: 1) Make sure it has been properly installed. 2) Find the CONTROL PANEL. It is located centrally on the hood’s front surface, on the underside of the unit. It looks like this: * Note: The hood should be swit ched on at least as soo n as you start cooking.
8 IMPORTANT! : Before cleaning, always ensure that you have switched your cooker hood OFF at the omni-polar switch, set at the wall from t he cable: Cleaning  Clean the external p arts with mild liquid deterg ents on a damp cloth.  Never use abrasive powder, corrosive solvents or brushes.
9 First remove the grille by pu lling down on it. Undo the side catches. You can now clean the anti -grease filter grilles. 9 Soak them for about one hour in hot water with a grease-loosening detergent then rinse off thoroughly with hot water. 9 Repeat the process if needed .
10 a) Changing the LI GHT BULB 9 Disconnect the hood from the power supply. 9 Access the lam p area. Please n ote that you will have to take off the grease grille at the bac k to access the lamp area. 9 Always re place burnt- out bulbs wi th olive-shaped 40 Watt bulbs.
11 Before installation and usage, read all t he instructions and ma ke sure that the voltage (V) and th e frequency (Hz) indicated on th e identification p late (found inside your Cooker Hood) and all the dat a inside the ap pliance are exactly the same as the voltage and frequency in your home.
12 : The cooker hood must not be fitted above stoves with a radiant top plate. --------------------- ------------------ : We recommend that at least two people install this hood.
13 3) Using a drill bit with a diameter of 6mm, make holes in the wall on the points you have just marked. 4) Insert the rawlplugs in the holes and then screw the support (upper) screws halfway in. 5) Hook the hood onto the screws an d secure it from the inside, tightening the suppor t and anchoring screws.
14 On request, you can obtain a spac er to cover the gap between the hood and the wall behind it (Fig. 7, below). 1. When positioning the hood on the w all unit, mark the position of the two slots ‘M’ for bloc king the spacer. 2. Using a 6mm diameter drill bit, make holes in the marks you noted on the wall.
15 If something has gone wrong with your Cooker Hood, checking against this chart might keep you from having to call for service. Symptom Solution The cooker hood will not start! • Check that the hood is connected to the electricity supply. • Check that the fan speed control is set properly.
Baumatic Ltd. Conditions of guarantee Dear Customer, Your new Ba umatic appl iance come s complete with a free 12 m onth guarant ee covering both parts an d labour costs resulting from defective materials or workmanship.
Headquarters Baumatic Ltd. Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX, United Kingdom Sales Telephone +44 118 933 6900 Sales Fax +44 118 931 0035 Service Telephone +44 118 933 6911 Service Fax +44 118 986 9124 Spares Telephone +44 118 933 6922 Technical / Advice Telephone +44 118 933 6933 E-mail : sales@baumatic.
18.
19.
An important point after buying a device Baumatic BT13.1SS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Baumatic BT13.1SS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Baumatic BT13.1SS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Baumatic BT13.1SS you will learn all the available features of the product, as well as information on its operation. The information that you get Baumatic BT13.1SS will certainly help you make a decision on the purchase.
If you already are a holder of Baumatic BT13.1SS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Baumatic BT13.1SS.
However, one of the most important roles played by the user manual is to help in solving problems with Baumatic BT13.1SS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Baumatic BT13.1SS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
