Instruction/ maintenance manual of the product XEA107BK Sharp
Go to page of 36
SHARP ELECTRONICS (Europe) GmbH Postbox 105504 20038 Hamburg, Germany ELECTRONIC CASH REGISTER FULL DETAILED INSTRUCTION MANUAL MODEL XE-A107.
CAUTION: The cash register should be securely fitted to the supporting platforms to avoid instability when the drawer is open. CAUTION: The socket-outlet shall be installed near the equipment and shall be easily accessible. VORSICHT: Die Netzsteckdose muß nahe dem Gerät angebracht und leicht zugänglich sein.
Thank you very much for your purchase of the SHARP Electronic Cash Register , Model XE-A107. Please read this manual carefully before operating your machine in order to gain full understanding of functions and features.
.
■ Plug the AC adapter connector into the AC adapter jack, then plug the AC adapter into the wall outlet.
■ Insert the mode key (the same key as drawer lock key) into the mode switch and move the key to get an appropriate mode. Mode key : T urns the display off. No operations are possible. Permits transaction entry .
When your register goes into an error state, it displays the error message “ ”.
Please do the following before using the register for the first time. For installing the cash register , find a stable surface near an AC outlet where the cash register will not subject to water sources or direct sunlight, then install the register .
2. Open the battery cover next to the paper roll cradle. 3. Install three new LR6 (“AA” size) batteries. NOTE Besure that the positive (+) and negative(-) poles of eachbattery are facing in the proper direction for installation.
5. Paper holding plate Spool Remove the paper holding plate from the spool. Insert the end of the paper into the slit in the spool. (Press F to feed more paper if required.
For setting the date, enter the date in 6 digits using the day-month-year format. For setting the time, enter the time in 4 digits using the 24-hour format. Set the mode switch to the Z/PGM position, then operate the following key sequences.
Merchandise can be classified into eight departments. Items sold with use of the department keys can later be printed on a report that shows the quantities sold and sales amounts classified by department.
In this section, the basic sales entry method using department key with simple correction (void) method is explained.
In order to check sales, you can read a sales report. Also you should reset sales data after you practicing your cash register . T o read a sales report, you should take an X report; set the mode switch to the X/Flash position, and press A .
Before making sales entries, make sure that a paper roll is installed in case receipt function is on. Also make sure to turn the mode switch to the REG position.
(Single Item Cash Sale (SICS) entry) When a sale is for only one item paid by cash, such as a pack of cigarettes, you can use SICS function.
Y our cash register provides the following six tax systems. Y our cash register is pre-programmed as manual V A T 1 to 4 system.
If you want to apply a discount or a premium for an item, enter the percent rate and press the percent key .
Y our register allows payment entries of foreign currency when you programmed a currency exchange rate. After items entries or during tendering entries, press V , the subtotal in foreign currency can be displayed.
When you receive an account from a customer or when you pay amount to a vendor , it is a good idea to use U or T respectively .
All the data on all of your registrations as well as other transaction information will remain in the memory of your cash register as long as your cash register has power (Be sure you have live batteries installed in case of a power failure).
This report, when taken in the Z/PGM mode, prints the same information as an X report.
Y our register can be modified to correspond with each period set for the introduction of EURO, and in your register each currency is treated as shown on the table below depending on which period you are in.
(EURO status 1) (EURO status 2) (EURO status 3) General Z report Issue Issue Issue GT memory - Clear Clear *2 Conversion of preset prices of Dept.
Before starting programming, set the mode switch to the Z/PGM mode. Also if necessary , enter the secret code and press A .
% can be programmed as a discount key or premium key . As a default, % is programmed as a discount key . Also you can program a percent rate for % . When 00.00% is programmed, use of preset percent rate is prohibited.
Y ou can program miscellaneous settings suitable for use. u u ABCDEFGH ( u : to finish programming) 1 .
For the details of EURO programming, please refer to “EURO Migration Function” on pages 21 and 22. u u ABCDEFGH ( u : to finish programming) 3 Automatic conversion of unit prices of Depts.
Y our machine allows you to print the programmed machine settings, namely , general & tax programming report and PLU programming report.
■ Mode key Develop the habit of locking the drawer when not using the register for any extended period of time.
29 Replacing the Paper Roll When a dye appears on the paper roll, it is time to replace the paper roll with new one. Be sure to use the paper roll specified in “Specifications” section on page 32. In case of journal printing 1. Set the mode switch to the REG position.
This cash register displays a low battery symbol ( ) when the batteries installed get low , and displays a no battery symbol ( ) when batteries are extremely low or batteries are not installed.
If you encounter any of the following problems, please read below before calling for service. • The display does not illuminate.
Model: XE-A107 Size: 335(W) × 360(D) × 190(H) mm Weight: Approx. 4.0 kg Power Source: Official (nominal) voltage and frequency Power Consumption: Stand-by: 1.5 W (The official voltage : 220 to 230 V [50Hz/60Hz] and 230 to 240 V [50Hz]) Operating: 2.
.
SHARP ELECTRONICS (Europe) GmbH Postbox 105504 20038 Hamburg, Germany ELECTRONIC CASH REGISTER FULL DETAILED INSTRUCTION MANUAL MODEL XE-A107.
An important point after buying a device Sharp XEA107BK (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp XEA107BK yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp XEA107BK - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp XEA107BK you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp XEA107BK will certainly help you make a decision on the purchase.
If you already are a holder of Sharp XEA107BK, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp XEA107BK.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp XEA107BK. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp XEA107BK along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
