Instruction/ maintenance manual of the product AR315W Airlinkplus
Go to page of 10
Quick Installation Guide Model # AR315W Ve r. 1 A.
Section 1 Connecting the Router Note : Prior to connecting the router, be sure to power off your computer, DSL/Cable modem, and the router . Y ou should setup the router with a wired connection first before attempting to setup any wireless connection.
Section 2 V erify Connection to Router Step 1 Go to Start , Run , type command (for Windows 95/98/ME) or cmd (for Windows 2000/XP) and click OK . Y ou will see the command prompt as below . Step 2 T ype ping 192.168.1.1 and press Enter . Y ou should get four reply responses back.
Step 5 After the IP address is released, type ipconfig/renew and press Enter . Y ou should get an IP address of 192.168.1.x (where x is a number between 2 - 254).
Step 6 After the IP address is released, click Renew . Y ou should get an IP address of 192.168.1.x (where x is a number between 2 - 254). If you don’t get an IP address, reset the router by holding in the reset button at the back of the router for 10 seconds while it is ON and try Renew again.
Step 3 Click Setup Wizard at the router ’s main screen. Step 4 Click Next at the Setup Wizard. Step 5 Select your type of Internet Access. If you are not sure what type of connection you have, please contact your Internet Service Provider (ISP) for assistance.
Step 6b For most DSL users, select PPPoE and click Next . Otherwise, choose your Login procedure for connecting to the Internet. For Cable Modem Users: Step 6a Click on Clone MAC Address , click OK , then click Next . Proceed to Step 7 . For DSL Users: Step 6c For PPPoE users, enter your Username and Password required to get online and click Next .
Step 7 Choose your IP Address assignment and click Next . For most users, you can use the default settings ( Dynamic IP Address ). If you are using a Static IP assigned by your ISP, select Specified IP Address and enter the applicable values.
Section 4 Connecting to the Router Wirelessly Below are the default wireless settings of the router . Y ou must configure your wireless network card to the same settings in order to establish a wireless connection to the router.
Section 6 T echnical Support E-mail: support@airlinkplus.com T oll Free: 1-888-746-3238 Web Site: www.airlinkplus.com Step 5 Ensure all of the boxes on the following Local area network Internet Configuration screen are unchecked .
An important point after buying a device Airlinkplus AR315W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Airlinkplus AR315W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Airlinkplus AR315W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Airlinkplus AR315W you will learn all the available features of the product, as well as information on its operation. The information that you get Airlinkplus AR315W will certainly help you make a decision on the purchase.
If you already are a holder of Airlinkplus AR315W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Airlinkplus AR315W.
However, one of the most important roles played by the user manual is to help in solving problems with Airlinkplus AR315W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Airlinkplus AR315W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
