Instruction/ maintenance manual of the product TE-2400 Casio
Go to page of 240
Eu Di U .K. CI Canada ELECTR ONIC CASH REGISTER TE-2200 TE-2400 DEALER'S MANUAL V ersion 1.0 August 2005.
2 Introduction & Contents This manual is intended to be used as a reference to the TE-2200 and TE-2400 system. It pro vides details to allow whole understanding of the system capabilities, its operation, and ho w it can be used to solve man y problems within the retail outlet.
TE-2200/2400 Dealer's Manual 3 System configuration ........................................................................................ 11 Hard ware configuration ..............................................................................
4 Introduction & Contents Address code 17 (print control) ................................................................................................ ................. 44 Address code 18 (print control for guest receipt and slip) ............
TE-2200/2400 Dealer's Manual 5 Programming item/ke y descriptor s .......................................................................... 114 Programming procedure ...............................................................................
6 Introduction & Contents Clerk detail link .............................................................................................................. ................ 134 Receipt message .......................................................
TE-2200/2400 Dealer's Manual 7 Report sample .................................................................................................................. ............. 160 Financial report ...................................................
8 Introduction & Contents Appendix: P eripheral de vice configuration ................................................... 191 UP-360 ..................................................................................................................
TE-2200/2400 Dealer's Manual 9 Report header file ...................................................................................................... 202 Report header ...........................................................................
10 Introduction & Contents.
11 System configuration TE-2200/2400 Dealer's Manual System configuration Hardware configuration General configuration 1 Operator display 2 Customer display (Popup display) 3 Stroke ke yboard (TE.
12 System configuration Ke yboard Po w e r supply P opup disp . i/f Dra wer Scanner HHS-15 Draw er 1 i/f Draw er 2 i/f RS- 232C COM1 RS- 232C COM2 Dra wer Slip printer SP-1300 MODEM or PC CPU RAM Flash Memor y Main Displa y Note: Shadowed device and dot line indicate option devices.
13 System configuration TE-2200/2400 Dealer's Manual Input/output connectors Input /output connectors COM ports are located in the leftside connector cover .
14 System configuration Steps to define COM port/peripheral devices After connecting peripheral devices, programming of I/O parameter ta ble, printer connection table are necessary .
15 IPL TE-2200/2400 Dealer's Manual IPL (Initial pr ogram loading) IPL should be made before initializing when the application program has been modif ied. Memory map of the terminal The application programs are do wnloaded from PC (via COM port)/other terminal (via inline or COM port)/CF card to the internal flash memory .
16 IPL (Initial Pr ogram Loading) CF card Ne ver plug/unplug the CF card during IPL. Via CF car d (to send the IPL data to CF car d) Operation 1. Set the mode switch to OFF position. 2. Open the CF card slot cover and inser t the CF card securely . (Please check that the CF card is vacant.
17 Initialization TE-2200/2400 Dealer's Manual Initialization Machine initialization pr ocedure 1. Plug the power cord into an A C outlet. 2. Hold down <JOURN AL FEED>. 3. T urn the mode switch to PGM position. 4. Release <JOURN AL FEED>.
18 Initialization Note: Please check the receipt after initialization operation (machine initialization, flag clear operation and init2) that the machine number is printed properly . If error codes are printed on it, check the hardwar e and retry the operation.
19 Initialization TE-2200/2400 Dealer's Manual Flag c lear operation 1. Plug the power cord into an A C outlet. 2. Hold down <RECEIPT FEED>. 3. T urn the mode switch to PGM position. 4. Release <RECEIPT FEED>. Y ou should see “FFFFFFFFFF” on the display .
20 Initialization Entering dia g mode P assw ord During initialize operation, you can program the password for PGM 3 ~ 7. If it is set, e v ery time you enter PGM 3 ~ 7 mode, you must input this password by the follo wing procedure. 1. Press <#-1> (normally <CASH/AMT TEND>).
21 Programming TE-2200/2400 Dealer's Manual Programming (General explanation) Program sub mode (P1 thru P7 mode) Program mode contains sev en sub modes listed belo w . When you change the mode switch to PGM mode, the re gister is always in the PGM 1 mode.
22 Pr ogramming (General explanation).
23 Program 5 TE-2200/2400 Dealer's Manual File allocation (Program 5) File allocation program Programming procedure File attribu- Consolidation file tion code daily sales Periodic 1 Periodic 2 Da.
24 File allocation pr ogramming (P5) File number list File Record Max No. Attribu- Allocat- Default File description Description No. length of records tion able Rec.
25 Program 5 TE-2200/2400 Dealer's Manual File Record Max No. Attribu- Allocat- Default File description Description No. length of records tion able Rec.
26 File allocation pr ogramming (P5) File Record Max No. Attribu- Allocat- Default File description Description No. length of records tion able Rec. No.
27 Program 5 TE-2200/2400 Dealer's Manual Issuing program reading report of program 5 mode Issuing procedure Report sample P 05 .................... FILE0001 22bytes 99 99 99 10bytes 99 99 99 FILE0002 35bytes 100 -- -- 10bytes 100 -- -- RAM 20,234 — Program read symbol — File name — Sales file record length/No.
28 File allocation pr ogramming (P5).
29 Program 4 TE-2200/2400 Dealer's Manual Key allocation (Program 4) Key allocation program Programming procedure By pressing the appropriate key By entering physical key code Menu sheet number Menu sheet Description Description number (f or transaction key) (f or Dept/flat-PLU) 0 or skip entering Set a function to the 1st ~ 6th menu sheets.
30 Key allocation pr ogramming (P4) Configuration of the ph ysical ke y la y out TE-2200 TE-2400 for Eu TE-2400 for US T he shado wed ke y cannot be programmed with any other functions. <00>, <000>, and <.> functions are only allocated to <#011> or <#012> ke ys.
31 Program 4 TE-2200/2400 Dealer's Manual Function code list Function Code Initial character Add check Arrangement Birth date Bill copy Bottle return Cancel Cash amount tendered Char ge Check end.
32 Key allocation pr ogramming (P4) Issuing pr ogram reading report of program 4 mode Issuing pr ocedure Report sample P 04 .................... 1 ----------------------- 00 0015-02 011-096 .
33 Program 3 TE-2200/2400 Dealer's Manual Ke y function/mac hine feature (Pr ogram 3) General contr ol pr ogram Programming pr ocedure Program data (b y address code) Address code 01 (date order/.
34 Key function/machine featur e (P3) Address code 04 (tax system, r ounding, etc.) Rounding Description Choice Program code Initial value Apply rounding for registration. No rounding = 0, IF1 = 1, IF2 = 2, Danish = 3, Norwegian = 4, Singaporean = 5, Finnish = 6, Australian = 7, South Africa = 8 T ax system Single tax system (1 ~ 10) = 0, U.
35 Program 3 TE-2200/2400 Dealer's Manual Address code 05 (print contr ol for receipt) Description Choice Program code Initial value Print total line during finalization. T ime system: 1 24 hour system, 2 12 hour system Feed one line after issuing receipt.
36 Key function/machine featur e (P3) Address code 06 (calculation & operation contr ol) Description Choice Program code Initial value Follow the taxable status and commission status of previous item when +/- operation is performed. Force to register rate tax before finalization.
37 Program 3 TE-2200/2400 Dealer's Manual Address code 07 (menu & price shift) Description Choice Program code Initial value Maintenance of last menu shift: 1 Do not maintain 2 Until next men.
38 Key function/machine featur e (P3) Address code 08 (print contr ol for fix ed total report) Description Choice Program code Initial value Print gross sales total on fix ed total report ( GROSS ) Pr.
39 Program 3 TE-2200/2400 Dealer's Manual Address code 09 (print contr ol for fix ed total report) Description Choice Program code Initial value Print taxable amount 1 total on fix ed total repor.
40 Key function/machine featur e (P3) Address code 13 (online contr ol) Address code 10 (print contr ol for taxab le amount, till timer) Description Choice Program code Initial value Issue reset report at satellites during Z consolidation.
41 Program 3 TE-2200/2400 Dealer's Manual Address code 14 (currency e xchange contr ol) Description Choice Program code Initial value Monetary mode of CECA1 and CECK1 in fix ed total report: Deci.
42 Key function/machine featur e (P3) Address code 15 (print contr ol for reports) Description Choice Program code Initial value Zero skip department report. Zero skip clerk report. Zero skip transaction report. Zero skip PLU report. Zero skip hourly report.
43 Program 3 TE-2200/2400 Dealer's Manual Address code 16 (print contr ol for grand total) Description Choice Program code Initial value Contents of the periodic 1 total: • Normal registration .
44 Key function/machine featur e (P3) Address code 17 (print contr ol) Description Choice Program code Initial value Money declaration compulsory (cash) in REG/RF mode Money declaration compulsory (ch.
45 Program 3 TE-2200/2400 Dealer's Manual Address code 18 (print contr ol for guest receipt and slip) Description Choice Program code Initial value Maximum printing lines of slip (00 ~ 99) Slip printing speed: “Maximum printing lines of slip” is necessary , if you select “High”.
46 Key function/machine featur e (P3) Address code 21 (message contr ol) Description Choice Program code Initial value Print graphic type logo. (If select “No”, character type logo is printed.) Print watermark on receipt. Print commercial message on slip/guest receipt.
47 Program 3 TE-2200/2400 Dealer's Manual Address code 25 (condiment etc.) Address code 26 (chec k trac king) Description Choice Program code Initial value Check tracking method: 1 Check No., 2 Ta b le No. Maximum digit of check number: 1 6-digit, 2 12-digit (If you use “table analysis” or “table range”, select 1 .
48 Key function/machine featur e (P3) Address code 29 (Euro) Address code 28 (Eur o) Description Choice Program code Initial value Define Euro as the main currency .
49 Program 3 TE-2200/2400 Dealer's Manual Address code 31 (scanning) Address code 32 (direct maintenance PLU) Description Choice Program code Initial value Journal compressed print (print by half.
50 Key function/machine featur e (P3) Address code 33 (batch PLU maintenance) Description Choice Program code Initial value Skip the record No. designation of batch maintenance PLU file. Skip the optimum stock field programming of batch maintenance PLU f ile.
51 Program 3 TE-2200/2400 Dealer's Manual Address code 37 (chec k number) Description Choice Program code Initial value Auto check starting number (0000 = 0001) * Auto check ending number (0000 = 9999) * * The starting number should be smaller than the ending number .
52 Key function/machine featur e (P3) Department key/flat-PLU key/PLU pr ogram (Batch feature pr ogramming) Programming procedure Department/flat-PLU key PLU Program data To another department/flat-PL.
53 Program 3 TE-2200/2400 Dealer's Manual T axab le status for the U.S./Singapore Food stamp (for Singapore, al ways “0”) T axable 1 status T axable 2 status T axable 3 status for Canada Donu.
54 Key function/machine featur e (P3) Department key/flat-PLU key/PLU pr ogram (Individual feature pr ogramming) Pr ogramming pr ocedure Department/flat-PLU key PLU Pr ogram data (b y address code) Ad.
55 Program 3 TE-2200/2400 Dealer's Manual Address code 14 (stoc k) Address code 15 (high amount limit) Address code 13 (set menu) Address code 12 (random code) Description Choice Program code PLU.
56 Key function/machine featur e (P3) Other address code Address code Description Choice Program code Single item control: Normal receipt = 0, Single item receipt = 3 Price change registration is enable. (Only effecti v e for scanning PLU linked to this department) Multiplication re gistration is enable.
57 Program 3 TE-2200/2400 Dealer's Manual T ransaction ke y pr ogram Programming pr ocedure Program data <CASH>, <CHARGE>, <CHECK> Description Choice Program code Restriction (to 0, 5) on last digit for amount tendered.
58 Key function/machine featur e (P3) <CREDIT> Description Choice Program code Restriction (to 0, 5) on last digit for amount tendered. Allow able number of validation printing (“0” means no limitation) *1 For ce v alidation operation. *1 Disable operation in RF/REG– mode.
59 Program 3 TE-2200/2400 Dealer's Manual <FOOD ST AMP TENDER>, <EBT> <NEW BALANCE> Description Choice Program code Allow able number of validation printing (“0” means no limitation) For ce v alidation operation. Disable operation in RF/REG– mode.
60 Key function/machine featur e (P3) <CHARA CTER RECALL>, <CHARACTER PRINT> Description Choice Program code Disable operation in RF/REG– mode. Disable operation in REG2 mode. Disable operation in REG1 mode. Always “0” Disable to change mode switch after registration.
61 Program 3 TE-2200/2400 Dealer's Manual <LOAN>, <PICK UP> <RECEIVED ON A CCOUNT>, <P AID OUT> Description Choice Program code Restriction (to 0, 5) on last digit for amount tendered. Allow able number of validation printing (“0” means no limitation) For ce v alidation operation.
62 Key function/machine featur e (P3) <+ (PLUS)>, <- (MINUS)>, <COUPON> T axab le status for the U.S./Singapore Food stamp (for Singapore, al ways “0”) T axable 1 status T axable 2 status T axable 3 status for Canada Donuts status (D 8 D 7 =”99” means donuts and all taxable.
63 Program 3 TE-2200/2400 Dealer's Manual <DEPOSIT> Description Choice Program code Restriction (to 0, 5) on last digit for amount tendered. Always “0” For ce v alidation operation. (only effecti ve after receipt issuance) Multiple validation (If “No, ” only one valida tion is possible.
64 Key function/machine featur e (P3) <PREVIOUS BALANCE> T axab le status for the U.S./Singapore Food stamp (for Singapore, al ways “0”) T axable 1 status T axable 2 status T axable 3 status for Canada Donuts status (D 8 D 7 =”99” means donuts and all taxable.
65 Program 3 TE-2200/2400 Dealer's Manual <PREMIUM (%+)>, <DISCOUNT (%-)> T axab le status for the U.S./Singapore F ood stamp (for Singapore, al ways “0”) T axable 1 status T axable 2 status T axable 3 status for Canada Donuts status (D 8 D 7 =”99” means donuts and all taxable.
66 Key function/machine featur e (P3) <RA TE T AX> <MANU AL T AX> <ERROR CORRECTION/CANCEL> Description Choice Program code Disable operation in RF/REG– mode. Disable operation in REG2 mode. Disable operation in REG1 mode. Always “00” Prohibit manual entry .
67 Program 3 TE-2200/2400 Dealer's Manual <VOID> <RECEIPT> Description Choice Program code Disable operation in RF/REG– mode. Disable operation in REG2 mode.
68 Key function/machine featur e (P3) <CHECK ENDORSEMENT> <NON ADD (#)>, <NON ADD (#)/NO SALE> Description Choice Program code Disable operation in RF/REG– mode.
69 Program 3 TE-2200/2400 Dealer's Manual <CUST OMER> <ARRANGEMENT> Description Choice Program code Disable operation in RF/REG– mode.
70 Key function/machine featur e (P3) <CURRENCY EXCHANGE> <BILL> Description Choice Program code Disable operation in RF/REG– mode. Disable operation in REG2 mode. Disable operation in REG1 mode. Always “0” Define amount symbol. (0, 1 ~ 4) (“0” means local currency symbol.
71 Program 3 TE-2200/2400 Dealer's Manual <SLIP> <T AX SHIFT>, <T AXABLE SUBT O T AL> Description Choice Program code Disable operation in RF/REG– mode. Disable operation in REG2 mode. Disable operation in REG1 mode. Always “0” For ce slip batch printing from the be ginning of the transaction.
72 Key function/machine featur e (P3) <EXEMPT> <MENU> <OPEN> Description Choice Program code Disable operation in RF/REG– mode. Disable operation in REG2 mode.
73 Program 3 TE-2200/2400 Dealer's Manual <OPEN2> <PRICE SHIFT> Description Choice Program code Disable operation in RF/REG– mode. Disable operation in REG2 mode. Disable operation in REG1 mode. Always “0” Release customer number compulsory .
74 Key function/machine featur e (P3) <REVIEW> <CLERK NUMBER> <OPERA T OR X/Z> Description Choice Program code Disable operation in RF/REG– mode.
75 Program 3 TE-2200/2400 Dealer's Manual <TRA Y T O T AL> <SUBT O T AL>, <MERCHANDISE SUBT O T AL> Description Choice Program code Allow able number of validation printing (“0” means no limitation) For ce v alidation operation Disable operation in RF/REG– mode.
76 Key function/machine featur e (P3) <NEW CHECK>, <NEW/OLD CHECK> <MUL TIPLICA TION>, <QU ANTITY/FOR>, <SQU ARE>, <CUBE> Description Choice Program code Disable operation in RF/REG– mode. Disable operation in REG2 mode.
77 Program 3 TE-2200/2400 Dealer's Manual <PRICE CHANGE> Description Choice Program code Disable operation in RF/REG– mode. Disable operation in REG2 mode. Disable operation in REG1 mode. Always “00000” High digit limitation (HDL) for manually entered unit price (“9” means NO T allo w manual entry .
78 Key function/machine featur e (P3) <EA T -IN>, <T AKEOUT> <ONE T OUCH NLU> Description Choice Program code Disable operation in RF/REG– mode.
79 Program 3 TE-2200/2400 Dealer's Manual <CANCEL> <V ALID A TION> <PRICE INQUIR Y>, <ST OCK INQUIR Y>, <CHECK PRINT>, <REFUND>, <COUPON2>, <NO SALE&g.
80 Key function/machine featur e (P3) Clerk program Secret number , drawer , chec k number programming Programming procedure Data Clerk detail link pr ogramming Programming pr ocedure Description Choice Program code Check number for clerk interrupt Assigning drawer n umber: 00 ~ 02 ("00" means drawer 1.
81 Program 3 TE-2200/2400 Dealer's Manual Clerk other pr ogramming Programming procedure (individual) Program data Address code 67 (Clerk control) Programming procedure (by range) Description Cho.
82 Key function/machine featur e (P3) Address code 68 (Commission rate) Address code 69 (T able number range) Address code 70 (Mode control) Description Choice Program code Commission rate 1 (integer:.
83 Pr ogram 3 TE-2200/2400 Dealer's Manual Other pr ograms Time range programming Programming pr ocedure Program data Ta b le range programming Programming pr ocedure Program data Description Cho.
84 Key function/machine featur e (P3) T ax table pr ogramming Programming pr ocedure 8 3 s 8 :::: s 8 :: ^ :::: a 8 :::: a 8 :::: a 8 :::: a 8 :::: a 8 :::: a 8 :::: a 8 s (for the U.
85 Pr ogram 3 TE-2200/2400 Dealer's Manual Example 1: Add-on rate tax 3 s 8 :::: s 8 8^25 a 8 0 a 8 5002 a 8 s T ax rate (2-digit for inte ger + 4-digit for decimal) ............................... 8.25% T ax table maximum v alue ("0" means unlimited).
86 Key function/machine featur e (P3) Example 2: U. S. tax tab le without rate setting TA X Price range (6%) Min. break point Max. break point $ .00 $ .01 $ .10 .01 .11 .24 .02 .25 .41 .03 .42 .58 .04 .59 .74 .05 .75 .91 .06 .92 1.08 .07 1.09 1.24 .08 1.
87 Pr ogram 3 TE-2200/2400 Dealer's Manual Example 3: U. S. tax table with rate setting TA X Price range (7%) Min. break point Max. break point $ .00 $ .01 $ .07 .01 .08 .21 .02 .22 .35 .03 .36 .49 .04 .50 .64 .05 .65 .78 .06 .79 .92 .07 .93 1.07 .
88 Key function/machine featur e (P3) Example 4: Add-in rate tax Example 5: Singapore tax T ax rate (2-digit for integer + 4-digit for decimal) ............................... 10.00 % Rounding/tax table system code. ...................................
89 Pr ogram 3 TE-2200/2400 Dealer's Manual Set menu pr ogramming Programming pr ocedure Batch X/Z report programming Programming pr ocedure Program data Contr ol flag (1st field) Report code (2nd.
90 Key function/machine featur e (P3) Chec k print control pr ogramming Programming pr ocedure Program data Arrangement pr ogramming Programming pr ocedure Description Choice Program code Define print.
91 Pr ogram 3 TE-2200/2400 Dealer's Manual Mix & match pr ogramming Programming pr ocedure Program data T axab le status for the U.S./Singapore F ood stamp (for Singapore, al ways “0”) T axable 1 status T axable 2 status T axable 3 status for Canada Donuts status (D 8 D 7 =”99” means donuts and all taxable.
92 Key function/machine featur e (P3) Emplo yee number pr ogramming Programming pr ocedure Description Choice Program code Employee number (0000000001 ~ 9999999999) :: ~ :: D 10 D 9 D 2 D 1 Significant numbers 6 3 s 6 :: 61 s 6 :: 6 a 6 s To a ne w (not sequential) record Record No.
93 Pr ogram 3 TE-2200/2400 Dealer's Manual Scheduler pr ogramming Programming pr ocedure Program data 1 Program data 2 Program data 3 Description Choice Program code • Execute kind: Switc h men.
94 Key function/machine featur e (P3) Job command table Description J ob No. Group/terminal ID Parameter Default menu sheet number after signing on. (D 3 of address code 70 of clerk programming) Disab.
95 Pr ogram 3 TE-2200/2400 Dealer's Manual Bottle link table pr ogramming Programming pr ocedure 6 3 s 6 :: 73 s 6 66 B 6 B 6 a 6 s 6 + 6 6 :::: 04 a 6 PLU No. To a new (not sequential) total Record No. PGM Mode switch To the next record Record No.
96 Key function/machine featur e (P3) I/O parameter table pr ogramming Programming pr ocedure Program data (Address 01: for COM 1 port) Program data (Address 02: for COM 2 port) Description Choice Program code International character set number for external printer: 00: U.
97 Pr ogram 3 TE-2200/2400 Dealer's Manual Reference (Baud rate/de vice table) Printer connection table pr ogramming Programming pr ocedure Program data Device Default baud rate Other selection S.
98 Key function/machine featur e (P3) Non PLU tab le pr ogramming Programming pr ocedure Program data Program sample Description Choice Program code Non PLU type: Short version = 0, Long v ersion = 1 Price check digit is included in the price field.
99 Pr ogram 3 TE-2200/2400 Dealer's Manual 6 3 s 6 4070 s 6 a s PGM Mode switch Activ ation Cancellation Proceeds the ne xt v acant r ecord. 6 3 s 6 0070 s 6 :: 6 a 6 6 : 6 a 6 B 66 6 :: 6 a 6 66 6 :: 6 a 6 :: 6 a 6 6 :: 6 a 6 :: 6 a 6 :: 6 a 6 s B B B a Record No.
100 Key function/machine featur e (P3) Scanning PLU direct maintenance pr ogramming Programming pr ocedure 6 3 s 6 0071 s 6 6 : 6 a 6 B 66 6 :: 6 a 6 66 6 :: 6 a 6 :: 6 a 6 6 :: 6 a 6 :: 6 a 6 :: 6 a .
101 Pr ogram 3 TE-2200/2400 Dealer's Manual Scanning PLU individual pr ogramming Programming pr ocedure 6 3 s 6 0171 s 6 6 :: 66 6 s 6 B 66 6 6 :: 6 a 6 s 66 6 s 6 :: 6 a 6 s B B B a 0170 B Addre.
102 Key function/machine featur e (P3) Description Choice Program code Bottle link record No. (0000 ~ 9999) :::: D 4 D 3 D 2 D 1 Significant numbers Description Choice Program code Link mix & match record No. (00 ~ 99) :: D 2 D 1 Significant numbers Description Choice Program code Unit quantity (0.
103 Pr ogram 3 TE-2200/2400 Dealer's Manual One touch NLU pr ogramming Programming pr ocedure 6 3 s 6 :: 77 s 66 B 6 s B PGM Mode switch Rec No. (up to 3 digits) To the next record Code Scanning ~ OBR } { NLU for the U.
104 Key function/machine featur e (P3) Issuing pr ogram reading report of program 3 mode Issuing pr ocedure Report sample — Program read symbol —T ransaction key program —K ey character/rec-#/fi.
105 Program 2 TE-2200/2400 Dealer's Manual Character (Program 2) Pr ogramming descriptors Programming pr ocedure Programming data Fixed totalizer (up to 12 characters) 6 2 s 6 :: : : s 66 a 6 s PGM Mode switch Address code To other address code Rec No.
106 Character pr ogramming (P2) Group c haracter Up to 12 characters Address Contents Initial character code 0106 Group 01 0206 Group 02 0306 Group 03 :: 9906 Group 99 GROUP01 GROUP02 GROUP03 : GROUP9.
107 Program 2 TE-2200/2400 Dealer's Manual Address Contents Initial character code main currency symbol (2), @ (2), No. (2), split pricing (2), not used (1) 0123 training filler (1), training symbol (1), not used (1), sub currency symbol (2) No. of item sold (2), No.
108 Character pr ogramming (P2) Address Contents Initial character code 5023 element title 8 of CF X/Z report (16) 5123 element title 9 of CF X/Z report (16) 5223 element title 10 of CF X/Z report (16.
109 Program 2 TE-2200/2400 Dealer's Manual Message Up to 24 characters Address Contents Initial character Y ours code 0132 1st line of logo message 0232 2nd line of logo message 0332 3rd line of .
110 Character pr ogramming (P2) Report header Up to 12 characters Batch X/Z header Up to 12 characters Check endorsement message Up to 40 characters Address Contents Initial character code 0124 Fixed .
111 Program 2 TE-2200/2400 Dealer's Manual Slip/external printer message Up to 40 characters (Contents are the same as file032.) Recall character messa g e Up to 40 characters Mix & match cha.
112 Character pr ogramming (P2) T erminal connection table Up to 8 characters Address Contents Initial character code 0191 Physical No. 01 MC#01 Error messa ge Up to 16 characters Miscellaneous messag.
113 Program 2 TE-2200/2400 Dealer's Manual Program guidance messa ge Up to 16 characters Registration guidance message Up to 16 characters Address Contents Initial character code 0183 Range program message 1st line 0283 Input start No. message 1st line 0383 Input start No.
114 Character pr ogramming (P2) Programming item/key descriptors Programming pr ocedure Depar tment ke y/transaction ke y PLU Flat-PLU key Programming data Depar tment up to 16 characters PLU/flat-PLU up to 16 characters Contents Initial character Department 01 Department 02 Department 03 : Department 99 DEPT01 DEPT02 DEPT03 : DEPT99 PLU No.
115 Program 2 TE-2200/2400 Dealer's Manual T ransaction ke y Up to 12 characters Function Code Initial character Add check Arrangement Birth date Bill copy Bottle return Cancel Cash amount tender.
116 Character pr ogramming (P2) Pr ogramming item/c lerk descriptor s b y range Pr ogramming pr ocedure Pr ogram data Department up to 16 characters PLU/flat-PLU up to 16 characters Contents Initial c.
117 Program 2 TE-2200/2400 Dealer's Manual Entering character s By character keyboar d TE-2200 character keyboar d RECEIPT JOURNAL FEED FEED #-2 #-1 C 78 9 45 6 12 3 00 0 • SHIF T INS/ OVR <.
118 Character pr ogramming (P2) 1 Shift key TE-2200: Pressing this ke y shifts the character through the upper- case letter , lo wer case letter and numerics. TE-2400: Pressing this ke y shifts the character from the uppercase letter to lower case letter and vice v ersa.
119 Program 2 TE-2200/2400 Dealer's Manual By character code 0@P p !1AQaq "2BRbr #3CScs $4DTdt %5EUeu &6FVfv '7GWgw (8HXhx )9IYiy *:JZjz +;K[k{ ,<Ll| -=M]m} .
120 Character pr ogramming (P2) Editing characters Correcting a character just entered OPERA TION DISPLA Y (c haracter) “L” “E” “N” “O” “N” 1 Enter LENON, instead of LEMON. yyy 1 Press left arrow key three times. B 1 Override mode “M” 1 Enter “M”.
121 Program 2 TE-2200/2400 Dealer's Manual Issuing pr ogram reading report of program 2 mode Issuing procedure Report sample P 02 ................
122 Character pr ogramming (P2).
123 Program 1 TE-2200/2400 Dealer's Manual Unit price/rate (Pr ogram 1) Date/time setting Date setting Time setting Unit price pr ogram Programming pr ocedure Programming the 1st unit price and u.
124 Unit price/rate pr ogramming (P1) Programming the unit price and unit quantity (to PLU) Program data Description Choice Program code D 12 ~ D 7 for non scalable item (unit quantity/2nd unit quanti.
125 Program 1 TE-2200/2400 Dealer's Manual Rate program <CURRENCY EXCHANGE> < CHECK>, <NEW BALANCE>, <PREMIUM (%+)>, <DISCOUNT (%–)>, <RA TE T AX> Amount pro.
126 Unit price/rate pr ogramming (P1) Issuing program reading report of program 1 mode Issuing procedure Report sample 6 1 s 6 s PGM Mode switch P 01 .................... CASH @100.00 CHECK @1.00 - @1.00 %- 10% DEPT01 0001-05 1.2 @1.00 DEPT02 0002-05 1 @2.
127 Pr ogram 6 TE-2200/2400 Dealer's Manual Program reading (Program 6) Issuing program reading report Issuing procedure Reading by file Reading by range Report code File name Report code Note Unit price Character Status, etc.
128 Pr ogram r eading (P6) Report sample Fixed totalizer T ransaction key Program 1 Program 2 Program 3 — Program 2 mode symbol —F ixed totalizer descriptor/rec-#/f ile-# P 02 .................... GROSS 0001-01 NET 0002-01 CAID 0003-01 CATL 0004-01 P 01 .
129 Pr ogram 6 TE-2200/2400 Dealer's Manual PLU Program 1 Program 2 Program 3 — Program 1 mode symbol — PLU range — PLU descriptor/rec-#/file-# — PLU random code — Unit quantity/unit price P 01 .................... #000001 - #000010 PLU0001 0001-04 #000001 1.
130 Pr ogram r eading (P6) Department Program 1 Program 2 Program 3 Gr oup — Program 1 mode symbol — Department range — Department descriptor/rec-#/file-# — Unit quantity/unit price P 01 .................... #0001 - #0010 DEPT01 0001-05 1.23 @10.
131 Pr ogram 6 TE-2200/2400 Dealer's Manual Clerk Program 2 Program 3 Hourly sales Scanning PLU — Program 2 mode symbol — Clerk range — Clerk descriptor/rec-#/file-# P 02.
132 Pr ogram r eading (P6) Ta b le analysis Program 2 Program 3 Grand total General contr ol Special character — Program 2 mode symbol —T ab le descriptor/rec-#/file-# P 02 .................... TBL01 0001-18 TBL02 0002-18 TBL03 0003-18 — Program 3 mode symbol —T ab le descriptor/rec-#/file-# — Program data P 03 .
133 Pr ogram 6 TE-2200/2400 Dealer's Manual Report header T ax table Set menu table Batch X/Z Program 2 — Program 2 mode symbol — Report header character/rec-#/file-# P 02 .................... FIX 0001-24 TRANS 0002-24 PLU 0003-24 — Program 3 mode symbol — Rec-#/file-# —T ax table pro gram da ta P 03 .
134 Pr ogram r eading (P6) Program 3 Clerk detail link Receipt message Check endorsement — Program 3 mode symbol — Batch report descriptor/rec-#/file-# — Execution mode/report code — Report code P 03 .
135 Pr ogram 6 TE-2200/2400 Dealer's Manual Slip/external printer messa ge Arrangement table Character recall Non-PLU table Check print contr ol — Program 2 mode symbol — Rec-#/file-# — Message P 02 .
136 Pr ogram r eading (P6) Emplo yee Scheduler Bottle link table Mix & match Program 2 Program 3 — Program 2 mode symbol — Descriptor/rec-#/file-# P 02 .................... DISCOUNT01 0001-51 DISCOUNT02 0002-51 DISCOUNT03 0003-51 — Program 3 mode symbol — Descriptor/rec-#/file-# — Discount amount/status P 03 .
137 Pr ogram 6 TE-2200/2400 Dealer's Manual One touch NLU T erminal connection table Program 2 Program 3 Printer connection table P 03 .................... 0001-77 Scanning PLU001 #1234567890123 — Program 3 mode symbol — Rec-#/file-# — Linked scanning PLU descriptor — Scanning PLU code P 02 .
138 Pr ogram r eading (P6) Miscellaneous message Printing guidance message AT c o mmand Online passw ord I/O parameter table — Program 2 mode symbol — Rec-#/file-# — Program P 02 .................... 0001-96 AT command ************* ************************ ************** 0002-96 — Program 3 mode symbol — Rec-#/file-#/program P 03 .
139 Pr ogram 6 TE-2200/2400 Dealer's Manual Registration guidance message X/Z guidance message Program guidance messa ge Error messa ge P 02 .................... #0001 E001 0001-80 Wrong mode 0002-80 #0003 E003 0003-80 — Program 2 mode symbol — Guidance-No.
140 Pr ogram r eading (P6).
141 Program 7 TE-2200/2400 Dealer's Manual Auto-program & system utilities (Program 7) A uto-pr ogramming Using the auto-program function makes it possible to sa ve and load the ter minal program f iles. Methods av ailable for saving the terminal program are as follo ws: 1) Saving onto a personal computer connected through online.
142 Auto-pr ogramming/system utilities (P7) Command code list File File description Command Command Command Command No. 900 090/990 092/992 0xx/9xx System f iles 089 Consecutive number work ✔ --- --.
143 Program 7 TE-2200/2400 Dealer's Manual File File description Command Command Command Command No. 900 090/990 092/992 0xx/9xx 418 (periodic 1 consolidation) ✔✔ --- --- 518 (periodic 2 cons.
144 Auto-pr ogramming/system utilities (P7) From CF car d 6 7 s 6 20 s 66 a 66 s 8 PGM Mode switch File selection by the cursor keys (Cancellation) (Execution) Cursor ke ys TE-2200 TE-2400 A uto-progr.
145 Program 7 TE-2200/2400 Dealer's Manual Other utilities Issuing system error log report Repor t sample ---------(1033)--------- GT TIME 003783 START DATE 04-03-2006 ------------------------ 01 0001 0001 000505 1058 0102 02 0000 0000 000000 0000 0000 03 0000 0000 000000 0000 0000 —T otal working time — Start date — Rec-#/job No.
146 Auto-pr ogramming/system utilities (P7) Issuing CF card directory report ---------(1170)--------- 001 PGM 1000.090 10,953 04-30-2004 12:34 002 FILE0001.090 1,024 04-30-2004 12:34 ------------------------ —T itle — Auto-programming title — Index capacity — Date/time —A uto-programming file name — File capacity Cf.
147 Program 7 TE-2200/2400 Dealer's Manual Set the A T command to MODEM Before executing this command, y ou should connect a MODEM. ---------(4310)--------- Modem set ------------------------ AT&.
148 Auto-pr ogramming/system utilities (P7).
149 Manager operation TE-2200/2400 Dealer's Manual Manager operation This section describes modes and operations that are generally used by management only . Besides user programming procedure, it also describes how to perform clerk assignments for clerk interrupt function and set stock quantities.
150 Manager operation Stoc k quantity maintenance (PLU/flat PLU/scanning PLU) Y ou can make changes in actual stock quantities for PLU using the procedures described in this section.
151 Manager operation TE-2200/2400 Dealer's Manual To input the new stock quantity of a PLU/flat PLU Procedure f or PLU Procedure f or flat PLU Clerk assignment Linking a clerk to a clerk interrupt buf fer enables clerk interrupt while a transaction is in progress.
152 Manager operation Pr ogramming f or the Eur o This procedure is used for defining main/sub currenc y , currency e xchange r ate for the Euro, and dra wer number for sub currency at the same time. Please follo w the guidance receipts issued in each time during this procedure.
153 Manager operation TE-2200/2400 Dealer's Manual T ype 3 procedure T ype 4 procedure Data (Currency con version rate) Data (Drawer number f or sub currency) Date (Unit price con version to Euro.
154 Manager operation Pr ogramming f or the A ustralian GST This procedure is used for defining •T ax symbol (*) is pr inted. •T axable amount (receipt) is skipped. • “GST INCLUDED” is set to the TX1 descriptor . •“ T AXABLE AMT” is set to the T A1 descriptor .
155 Read/reset report TE-2200/2400 Dealer's Manual Read/reset repor t issuance Preparation for issuing report Money declaration There are two ways to declare the money in drawer amount; money declaration in the REG1/REG2/RF mode or money declaration in the X1/Z1 mode.
156 Read/r eset r epor t Programmability Report issuance can be programmed with the following features: • Suppress printing of zero total lines. •M oney declaration compulsory • Report header message (report title) • Print sales ratio • Suppress printing of grand total • Print two copies of the fixed total reset report.
157 Read/reset report TE-2200/2400 Dealer's Manual • Individual open chec k report Range report • PLU range report • Scanning PLU range report Report code (Read: #=0 / Reset: # = 1) Report name Consolidation file Ta rg et-No.
158 Read/r eset r epor t Individual file repor t Report code (Read: #=0 / Reset: # = 1) Report name Consolidation file Ta rg et-No. Daily Periodic 1 Periodic 2 Daily Periodic 1 Periodic 2 Start number End number PLU range by record number 10014 1#114 1#214 10314 1#414 1#514 Start rec-No.
159 Read/reset report TE-2200/2400 Dealer's Manual Batch report Report name Report code Daily Periodic 1 Periodic 2 PLU reset (no report) 50014 51114 51214 Scanning PLU reset (no report) 50026 --.
160 Read/r eset r epor t Report sample Financial report — X1 mode symbol/date/time — Clerk descriptor/Mc-No./consecutive No. — Report header/title — Report code — Declared amount of main cur.
161 Read/reset report TE-2200/2400 Dealer's Manual Fixed total report — Mode symbol/date/time — Clerk descriptor/Mc-No./consecutive No. — Report header/title/reset counter (Z only) — Repo.
162 Read/r eset r epor t T ransaction key report — Mode symbol/date/time — Clerk descriptor/Mc-No./consecutive No. — Report header/title/reset counter (Z only) — Report code — Cash count —.
163 Read/reset report TE-2200/2400 Dealer's Manual PLU report All PLU/range/menu repor t — Mode symbol/date/time — Clerk descriptor/Mc-No./consecutive No.
164 Read/r eset r epor t Best 50 report PLU stock report All PLU/range report — Ranking — PLU character/quantity — Sales ratio/amount — Old price total — Red price total — Discount total .
165 Read/reset report TE-2200/2400 Dealer's Manual By group/department repor t — Classification title (by group/dept.) — PLU character/optimum stock quantity — Current stock quantity — PL.
166 Read/r eset r epor t Best 50 report — Ranking — Department character/quantity — Sales ratio/amount — Old price total — Red price total — Discount total — Quantity total — Amount total — Red price total — Discount total Group report — Mode symbol/date/time — Clerk descriptor/Mc-No.
167 Read/reset report TE-2200/2400 Dealer's Manual Clerk report — Mode symbol/date/time — Clerk descriptor/Mc-No./consecutive No. — Report header/title/reset counter (Z only) — Report cod.
168 Read/r eset r epor t Hourly sales report — Mode symbol/date/time — Clerk descriptor/Mc-No./consecutive No. — Report header/title/reset counter (Z only) — Report code —T ime frame — Cus.
169 Read/reset report TE-2200/2400 Dealer's Manual Ta b le analysis report — Mode symbol/date/time — Clerk descriptor/Mc-No./consecutive No. — Report header/title/reset counter (Z only) —.
170 Read/r eset r epor t Scanning PLU report By group/department repor t — Mode symbol/date/time — Clerk descriptor/Mc-No./consecutive No. — Report header/title/reset counter (Z only) — Report.
171 Read/reset report TE-2200/2400 Dealer's Manual Best 50 report Inactive report — Classified title — Ranking — Scanning PLU character/quantity — Sales ratio/total — Scanning PLU code .
172 Read/r eset r epor t Scanning PLU stoc k report — Mode symbol/date/time — Clerk descriptor/Mc-No./consecutive No. — Report header/title/reset counter (Z only) — Report code — Mix & m.
173 Read/reset report TE-2200/2400 Dealer's Manual File reset PLU reset Scanning PLU reset — Mode symbol/date/time — Clerk descriptor/Mc-No./consecutive No. — Report header/title/reset counter — Report code — Action/result — Mode symbol/date/time — Clerk descriptor/Mc-No.
174 Read/r eset r epor t.
175 Application systems TE-2200/2400 Dealer's Manual Application systems Scanning PLU Y ou can register items by scanning. System configuration of the scanning PLU system Setup 1. After connecting a barcode scanner , program I/O parameter table to f it the scanner .
176 Application systems PLU maintenance There are three ways to maintain scanning PLU, i.e. not found PLU maintenance, batch PLU maintenance and direct PLU maintenance. Not found PLU maintenance When an item which code is not existed in the scanning PLU f ile is registered, the “Not found” error occurs.
177 Application systems TE-2200/2400 Dealer's Manual Scanning PLU registration By scanner/code input/one touch NLU key OPERA TION RECEIPT “Scanning” 123 456 B B F Not found PLU item OPERA TION RECEIPT “Scanning” “Not Found Error” 100 ! “Scanning” F Scan-PLU ($2.
178 Application systems Price change operation When a scanning PLU item is programmed to enable to change price, you can change the unit price temporarily .
179 Application systems TE-2200/2400 Dealer's Manual Mix & match discount There are three types of mix & match processing: • Discount 1 (discount every required quantity) • Discount 2.
180 Application systems Discount type 3: In this type of processing, a discount is made when the quantity of a particular scanning PLU reaches a certain number during registration.
181 Application systems TE-2200/2400 Dealer's Manual Printing on the external printer s Y ou can print receipts/orders on external printer . Maximum 2 external printers can be connected to a terminal. It is possible to print out to another printer (i.
182 Application systems Time and attendance Y ou can control your employees’ working time. F or this function, the emplo yee file (f ile 061), the time and attendance f ile (f ile 019) and the <CLOCK-IN/OUT> ke y is necessary . Clock-in operation 1.
183 Tips TE-2200/2400 Dealer's Manual Tips Future order This is an enhancement of the training function. By using the original training specification, the training clerk cannot accept an y customer . Because no journal printing and no memory affection of this function is made .
184 Tips A utomatic execution of Eur o switcho ver b y arrangement and scheduler The following sample sho ws an automatic execution program of arrangement and scheduler .
185 Appendix (Calculation method) TE-2200/2400 Dealer's Manual Appendix: Calculation method The follo wing calculation methods of totalizer memories are explained in this cha pter . • All formulas in these explanations are calculated in the registration mode.
186 Appendix (Calculation method) T otal or Counter Increments or Decr ements by Sales total or tendered total by specified medium + Receiv ed on account total (Cash in draw er only) – Paid out (Cas.
187 Appendix (Font table) TE-2200/2400 Dealer's Manual Appendix: Font code tables These models hav e the capability to print/display in Sla vic, Greek, Cyrillic, Baltic, Arabic fonts.
188 Appendix (Font table) Special font set Sla vic (Windows code page 852) Special initialization code D 14 D 13 D 12 = 010 Greek Special initialization code D 14 D 13 D 12 = 020 Éá Ó – Ĺ í Đ .
189 Appendix (Font table) TE-2200/2400 Dealer's Manual Cyrillic (Windows code pa ge 866) Special initialization code D 14 D 13 D 12 = 030 Baltic Special initialization code D 14 D 13 D 12 = 040 .
190 Appendix (Font table) Arabic Special initialization code D 14 D 13 D 12 = 050 ° ß . ∞ •ø √± £ 1 / 2 ¤ 1 / 4 « » ~ ~ Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code .
191 Appendix (Peripheral configuration) TE-2200/2400 Dealer's Manual Appendix: P eripheral de vice configuration UP-360 Dip switch is located at the bottom of the printer .
192 Appendix (Peripheral configuration) Select these options: 1. Interface selection: SNI RS-232C interface selection 2. Baud rate: Baud rate = 9600 bps 3. Data format settings: Parity = Odd Stop bits = One Data bits = Eight bits 4. Software control: Hardware control = Enable CTS/R TS flo w control Software control = Disable Xon/Xof f 5.
Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 193 Appendix: File record f ormat Fixed totalizer file Fixed totalizer (daily) File name: Fixed totalizer (daily) File No.: 001 Max. allocatable records: 99(fixed) Fixed totalizer (periodic/consolidation) File name: Fixed totalizer (periodic 1) File No.
194 Appendix (File record format) PLU file PLU (daily) File name: PLU File No.: 004 Max. allocatable records: Depend on the model PLU (periodic/consolidation) File name: PLU (periodic 1) File No.: 104 Max. allocatable records: see above File name: PLU (periodic 2) File No.
Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 195 Gr oup file Group (dail y) File name: Group (daily) File No.: 006 Max. allocatable records: 99 Group (periodic/consolidation) File name: Group (periodic 1) File No.: 106 Max. allocatable records: 99 File name: Group (periodic 2) File No.
196 Appendix (File record format) Clerk file Clerk (pr ogramming) File name: Clerk (programming) File No.: 007 Max. allocatable records: 99 Clerk detail (dail y , periodic/consolidation) File name: Clerk detail (daily) File No.: 011 Max. allocatable records: 99 x 99 File name: Clerk detail (periodic 1) File No.
Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 197 Hourly sales file Hourly sales (dail y) File name: Hourly sales (daily) File No.: 009 Max. allocatable records: 99 Hourly sales (periodic/consolidation) File name: Hourly sales (periodic 1) File No.
198 Appendix (File record format) Scanning PLU files Scanning PLU file (daily) File name: Scanning PLU File No.: 016 Max. allocatable records: Depend on the model Non PLU tab le file (program) File name: Non PLU table File No.: 040 Max. allocatable records: 100 Batch maintenance PLU file (pr ogram) File name: Batch maintenance PLU File No.
Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 199 One touch NLU table file File name: One touch NLU table File No.: 077 Max. allocatable records: 999 Mix & match table file Mix & match table file (dail y) File name: Mix & match table (daily) File No.
200 Appendix (File record format) Ta b le analysis file Ta b le analysis (daily) File name: Table analysis (daily) File No.: 018 Max. allocatable records: 99 05 1 0 Counter T otalizer (customer) 01 2 1 51 8 2 3 2 8 Character Counter T otalizer (customer) Minimum check No.
Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 201 Grand total file Grand total (daily) File name: Grand total (daily) File No.: 020 Max. allocatable records: 3 (fixed) Grand total (consolidation) File name: Grand total (consolidation) File No.
202 Appendix (File record format) Report header file Report header File name: Report header File No.: 024 Max. allocatable records: 27 (fixed) T ax table file T ax table File name: Tax table File No.: 025 Max. allocatable records: 10 Set menu tab le file Set menu table File name: Set menu table File No.
Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 203 Batch X/Z file Batch X/Z File name: Batch X/Z File No.: 029 Max. allocatable records: 10 Receipt message file Receipt message File name: Receipt message File No.
204 Appendix (File record format) Arrangement file Arrangement file File name: Arrangement File No.: 038 Max. allocatable records: 9999 Character recall file Character recall File name: Character recall File No.: 039 Max. allocatable records: 999 Chec k print file Chec k print File name: Check print File No.
Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 205 System files Character key tab le file File name: Character key table File No.: 046 Max. allocatable records: depends on the model Ke y/character ke y table recor d No. TE-2200 TE-2400 (Eu) No character can be programmed to shadowed k eys.
206 Appendix (File record format) Ke y table file File name: Character key table File No.: 074 Max. allocatable records: depends on the model Key/key table record No. TE-2200 TE-2400 (Eu) The shadowed ke y cannot be pr ogrammed with any other function k e ys.
Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 207 T erminal connection table file File name: Terminal connection table File No.: 091 Max. allocatable records: 1 Printer connection table File name: Printer definition table File No.: 093 Max.
208 Appendix (File record format) 08 Character 04 Program 04 8 Program 02 4 5 6 9 1 1 Error code Job No. Source terminal Ta rg et terminal Date T ime 06 2 Character AT command file File name: AT command File No.: 096 Max. allocatable records: 2 (fixed) Online passw ord file File name: Online password File No.
Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 209 Guidance message files Error messa ge file File name: Error message File No.: 080 Max. allocatable records: 191(fixed) 01 6 Character Rec-No. Meaning Default (English) message 001 Error code (do NOT change) 002 Mode switch position changed before finalization.
210 Appendix (File record format) Rec-No. Meaning Default (English) message 053 Error code (do NOT change) 054 Finalization of a transaction attempted without confirming the subtotal. 055 Error code (do NOT change) 056 Finalization of a transaction attempted without confirming of the food stamp subtotal.
Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 211 Rec-No. Meaning Default (English) message 115 Error code (do NOT change) 116 Attempt to finalize a transaction without specifying <EAT-IN> or <TAKE-OUT>. (1/2) 117 Attempt to finalize a transaction without specifying <EAT-IN> or <TAKE-OUT>.
212 Appendix (File record format) Rec-No. Meaning Default (English) message 183 Error code (do NOT change) 184 Attempt to print the last separated transaction on slip. (1/3) 185 Attempt to print the last separated transaction on slip. (2/3) 186 Attempt to print the last separated transaction on slip.
Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 213 Miscellaneous message file File name: Miscellaneous message File No.: 078 Max. allocatable records: 58 (fixed) 01 6 Character Rec-No.
214 Appendix (File record format) Printing guidance message file File name: Printing guidance message File No.: 079 Max. allocatable records: 85(fixed) 02 4 Character Rec-No.
Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 215 Rec-No. Meaning Default (English) message 073 Euro currency system setup message 5-4 074 Euro currency system setup message 5-5 075.
216 Appendix (File record format) X/Z guidance message file File name: X/Z guidance message File No.: 082 Max. allocatable records: 48(fixed) 01 6 Character Rec-No. Meaning Default (English) message 001 PLU range report message 1st line 002 Input start No.
Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 217 Rec-No. Meaning Default (English) message 019 PLU best report message 1st line --- Input start No. message 1st line (quote from rec-002) --- Input start No. message 2nd line (quote from rec-003) --- PLU best report message 1st line (quote from rec-016) --- Input end No.
218 Appendix (File record format) Program guidance messa ge file File name: Program guidance message File No.: 083 Max. allocatable records: 93(fixed) 01 6 Character Rec-No. Meaning Default (English) message 001 Range program message 1st line 002 Input start No.
Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 219 Rec-No. Meaning Default (English) message 028 Batch maintenance programming message 1st line 029 Input batch maintenance record No.
220 Appendix (File record format) Rec-No. Meaning Default (English) message 064 Please wait message 065 066 Auto-program (register to register) message 067 Input target machine No.
Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 221 Registration guidance message file File name: Registration guidance message File No.
222 Appendix (File record format) Help message file File name: Help message File No.: 085 Max. allocatable records: 199 (fixed) Note: It is necessary to allocate this file, if you want to make your original help.
Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 223 Rec-No. Meaning Default (English) message 050 Second help item message (14/53) 051 Second help item message (15/53) 052 Second help.
224 Appendix (File record format) Rec-No. Meaning Default (English) message 111 Third help item message (22/26) 112 Third help item message (23/26) 113 Third help item message (24/26) 114 Third help i.
Appendix (File record f ormat) TE-2200/2400 Dealer's Manual 225 Rec-No. Meaning Default (English) message 172 Fifth help item message (37/64) 173 Fifth help item message (38/64) 174 Fifth help it.
226 Appendix (File record format).
227 Appendix (Compulsory) TE-2200/2400 Dealer's Manual Appendix: Compulsor y This section explains the priority compulsions and the methods to solv e them.
228 Appendix (Compulsory).
229 Appendix (Error code) TE-2200/2400 Dealer's Manual Appendix: Error code E001 E003 E004 E005 E008 E009 E010 E011 E016 E017 E018 E019 E021 E023 E024 E026 E029 E030 E031 E032 E033 E035 E036 E037 E038 E040 E041 E042 E044 E045 E046 E047 E048 Mode switch position changed before finalization.
230 Appendix (Error code) Err or code (…continued) Error code Message Meaning Action E049 E050 E051 E052 E053 E054 E055 E056 E059 E060 E061 E062 E064 E066 E075 E085 E100 E101 E103 E105 E106 E112 E114 E139 E146 E164 E165 E166 E176 E200 E201 E202 E203 E205 CHECK memory full DETAIL memory full CHK/TBL No.
231 Appendix (Error code) TE-2200/2400 Dealer's Manual System err or code Error code Meaning File I/O errors 750 File cannot be created. 751 No designated drive 752 FCB area shortage of flash memory 753 No appropriate record number is designated.
232 Appendix (Error code).
233 Index TE-2200/2400 Dealer's Manual Inde x A action code 102 activation of batch maintenance 99 add check 31, 79, 115 add-in rate tax 88 add-in tax 186 add-on rate tax 85 add-on tax 185 Arabic.
234 Index D date order 33 date setting 123 decimal point 31, 115 declaration 31, 38, 79, 115, 160, 161, 167, 186 deleting a file from CF card 146 department 24, 31, 52, 54, 115, 116, 127, 130, 159 dep.
235 Index TE-2200/2400 Dealer's Manual M manager control mode 149 manager operation 149 manual tax 31, 66, 115, 185 media change 31, 79, 115 memory map 15 menu 72 menu & price shift 37 menu s.
236 Index program / message / b uff er file 26 program 1 programming in X1 mode 149, 154 program guidance message 26, 113, 127, 139 program guidance message file 218 program reading report of program .
237 Index TE-2200/2400 Dealer's Manual T table analysis 25, 89, 106, 127, 132, 159 table analysis file 200 table analysis report 169 table number 31, 79, 115 table number range 82 table range 83 .
.
.
CASIO COMPUTER CO ., L TD . 6-2, Hon-machi 1-chome Shibuy a-ku, T oky o 151-8543, Japan IR0508-000501A TE22_24DM*E Printed in Japan.
An important point after buying a device Casio TE-2400 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Casio TE-2400 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Casio TE-2400 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Casio TE-2400 you will learn all the available features of the product, as well as information on its operation. The information that you get Casio TE-2400 will certainly help you make a decision on the purchase.
If you already are a holder of Casio TE-2400, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Casio TE-2400.
However, one of the most important roles played by the user manual is to help in solving problems with Casio TE-2400. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Casio TE-2400 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
