Instruction/ maintenance manual of the product S 200 Canon
Go to page of 198
User’ s Guide BUBBLE JET PRINTER V1 S200.book Page 1 Saturday, September 22, 2001 2:34 PM.
2 T able of Contents Introduction ..................................................................................................... 5 How to Use This Manual ................................................................................. 6 Saf ety Precautions .
3 T able of Contents Using the Printer with a Network ................................................................. 65 Uninstalling Printer Drivers .......................................................................... 69 Routine Maintenance .
4 T able of Contents T roub leshooting .......................................................................................... 129 Cannot Install the Printer Driver ................................................................ 130 Print Quality is Poor or Contains Errors .
5 Introduction Intr oduction Thank y ou for purchasing the Canon S200 Bub ble Jet Printer . This User’ s Guide provides complete e xplanations of the f eatures and functions of the pr inter . This guide uses the f ollowing symbols to indicate impor tant inf or mation.
6 How to Use This Manual Ho w to Use This Manual T o vie w this User ’ s Guide, w e recommend that you use Acrobat Reader 4.0 or Acrobat Reader 3.0. Please note that screens display ed by Acrobat Reader 3.0 are slightly diff erent. Use this b utton to enlarge the vie wing screen.
7 How to Use This Manual Displa ys the table of contents . Clic k the heading to jump to the topic. Clic k the “” symbol to see the headings f or each chapter . Clic k the “” symbol to close the headings. Use this b utton to search f or a word.
8 Saf ety Precautions Safety Precautions Please read the saf ety warnings and cautions provided in this manual to ensure that y ou use the printer safely . Do not attempt to use the printer in any wa y not descr ibed in this manual. Warning ➤ You may cause an electric shock/fire or damage the printer if you ignore any of these safety precautions.
9 Saf ety Precautions Ne v er plug the pr inter into a pow er sock et that is shared with other equipment (e xtension lead, double adapter , etc.). Ne v er use the pr inter if the pow er cord is bundled or knotted.
10 Saf ety Precautions ■ Maintaining the printer Do not attempt to disassemb le or modify the pr inter . There are no user ser viceable par ts inside the printer . The printer contains high-voltage components . Nev er attempt any maintenance procedure not described in this guide.
11 Saf ety Precautions ■ Choosing a location Do not install the printer in a location that is unstable or subject to e xcessiv e vibration. Do not install the printer in locations that are ver y humid or dusty , in direct sunlight, outdoors, or close to a heating source .
12 Saf ety Precautions ■ P ower supply Ne v er remov e the plug by pulling on the cord. Do not use an e xtension lead. If y ou do not intend to use the pr inter f or a long per iod of time , unplug the pr inter . Ne v er use a power supply v oltage other than that supplied in the countr y of purchase.
13 Saf ety Precautions ■ W orking around the pr inter Ne v er put your hands or fi ngers in the printer while it is pr inting. Do not place metal objects (paper clips, staples , etc.) or containers of fl ammable solv ents (alcohol, thinners. etc.) on top of the pr inter .
14 Saf ety Precautions Ne v er touch the electr ical contacts on a print head after pr inting. The metal par ts ma y be very hot and could cause bur ns .
15 Printer P ar ts and Their Functions Printer P ar ts and Their Functions • F ront Vie w • Rear Vie w • Inside the Printer • Con fi guration of the BJ Car tr idge S200.
F ront View 16 Printer P ar ts and Their Functions Fr ont View RESUME/CANCEL Button Press to resume printing once an error has been resolv ed. The pr inter will then initialise ready f or pr inting. Also , to cancel pr inting in progress , press this b utton.
Rear View 17 Printer P ar ts and Their Functions Rear Vie w USB P or t Connects the printer to a computer through a USB interf ace. P ower cable connector Connect the supplied cab le into this connector . Handle Hold this handle with y our fi ngers of both hands to mov e the pr inter in a shor t distance.
Inside the Printer 18 Printer P ar ts and Their Functions Inside the Printer P aper Thickness Le ver Adjusts the gap between the print head and the surf ace of the printing paper . Car tridge Loc k Lever Loc ks the BJ Car tridge into the holder . Once the BJ Car tr idge is installed, do not touch this le v er .
Con fi guration of the BJ Car tridge 19 Printer P ar ts and Their Functions Configuration of the BJ Car tridge The BJ Car tr idge consists of a print head and two ink tanks (e xpendable supplies) as shown belo w . When the pr inter runs out of ink, replace only the empty ink tank with a new one.
20 Printer Dr iv er Functions (Windows) Printer Driver Functions (Windo ws) • Opening the Printer Proper ties Dialog Bo x • Printer Proper ties Dialog Bo x Descr iption • BJ Status Monitor Functions • Cancelling a Print Job • Uninstalling Printer Dr iv ers S200.
Opening the Printer Proper ties Dialog Box 21 Printer Dr iv er Functions (Windows) Opening the Printer Pr oper ties Dialog Bo x The Printer Proper ties dialog bo x can be opened from either within an application, or directly from the Windows Star t menu.
Opening the Printer Proper ties Dialog Box 22 Printer Dr iv er Functions (Windows) ■ Opening the Printer Proper ties dialog bo x directly from the Star t menu This method is used f or maintenance operations such as print head cleaning, or to specify printer settings common to all application programs .
Printer Proper ties Dialog Box Description 23 Printer Dr iv er Functions (Windows) Printer Pr oper ties Dialog Bo x Description Note ➤ The screens in this section refer to Windows Me/Windows 98 operation. The equivalent screens for Windows XP/Windows 2000 may look slightly different.
Printer Proper ties Dialog Box Description 24 Printer Dr iv er Functions (Windows) Main T ab (1) Media T ype Ensure this setting matches the type of media loaded in the printer . (2) Print Quality Select the print quality you require from among the diff erent options.
Printer Proper ties Dialog Box Description 25 Printer Dr iv er Functions (Windows) (3) Colour Adjustment/Color Adjustment Select the method of colour adjustment. T o make detailed colour adjustments , select Manual , then clic k the Set... button. (4) Greyscale Printing/Gra yscale Printing Select to print a greyscale v ersion of a colour document.
Printer Proper ties Dialog Box Description 26 Printer Dr iv er Functions (Windows) P age Setup T ab (1) P age Size Ensure the correct paper size is selected.
Printer Proper ties Dialog Box Description 27 Printer Dr iv er Functions (Windows) (2) Orientation Select landscape or por trait printing and ensure it is the same or ientation used in the application. (3) Printing T ype Select the printing method from among the follo wing.
Printer Proper ties Dialog Box Description 28 Printer Dr iv er Functions (Windows) (6) Collate Select to print multiple copies of the document one cop y at a time. (7) Pre view Area V erify the ov erall la y out, stamps, bac kground, etc., to be applied to the pr int job .
Printer Proper ties Dialog Box Description 29 Printer Dr iv er Functions (Windows) Stamp/Bac kgr ound T ab (1) Stamp Select the chec k box and choose the stamp . (2) Define Stamp... This allows y ou to create ne w stamps, or modify details of a selected stamp .
Printer Proper ties Dialog Box Description 30 Printer Dr iv er Functions (Windows) (3) Place stamp o ver text When Stamp is selected, y ou can select this check bo x. When selected, the stamp is printed ov er the pr int data. (4) Stamp first pa g e onl y When Stamp is selected, y ou can select this check bo x.
Printer Proper ties Dialog Box Description 31 Printer Dr iv er Functions (Windows) Effects T ab (1) Sim ulate Illustration This function manipulates colour image data with cer tain eff ects. Select the check bo x and adjust the brightness of the image with the Contrast slide bar .
Printer Proper ties Dialog Box Description 32 Printer Dr iv er Functions (Windows) (2) Monochr ome Effects Prints a colour image in a single colour . Select the check bo x and choose a colour or use a custom colour using Select Colour / Select Color .
Printer Proper ties Dialog Box Description 33 Printer Dr iv er Functions (Windows) Pr ofiles T ab (1) Printing Pr ofiles This list displa ys the pr inting settings currently registered in the Pro fi les tab .
Printer Proper ties Dialog Box Description 34 Printer Dr iv er Functions (Windows) (2) Details Displa ys all the pr inter settings selected in Printing Pr ofiles . (3) Description Displa ys a descr iption of the printer settings selected in Printing Pr ofiles .
Printer Proper ties Dialog Box Description 35 Printer Dr iv er Functions (Windows) Maintenance T ab (1) Cleaning Clic k to star t print head cleaning. (2) Deep Cleaning Clic k to star t print head deep cleaning. Use this function only if Cleaning has not improv ed the pr int quality .
Printer Proper ties Dialog Box Description 36 Printer Dr iv er Functions (Windows) (3) Print Head Alignment Aligns the print head. F or details on pr int head alignment, ref er to “ Pr int Head Alignment ” . (4) Nozzle Chec k Prints the nozzle check patter n to ensure the print head nozzles are outputting ink nor mally .
BJ Status Monitor Functions 37 Printer Dr iv er Functions (Windows) BJ Status Monitor Functions The BJ Status Monitor allows y ou to chec k the status of the pr inter . If an error occurs, the status monitor indicates the nature of the error and suggests an appropriate solution.
BJ Status Monitor Functions 38 Printer Dr iv er Functions (Windows) Note ➤ To open the BJ Status Monitor when the printer is not printing, click the Maintenance tab in the Printer Properties dialog box and click the Start Status Monitor button. S200.
BJ Status Monitor Functions 39 Printer Dr iv er Functions (Windows) ■ When errors occur The BJ Status Monitor is automatically displa yed when an error occurs , e.g. if the pr inter runs out of paper or paper jams. In such cases, tak e the appropriate action as descr ibed in the Printer Status tab .
Cancelling a Print Job 40 Printer Dr iv er Functions (Windows) Cancelling a Print Job Y ou can cancel a print job that is currently performed by: • Pressing the RESUME/CANCEL b utton, or • Operating the BJ Status Monitor .
Cancelling a Print Job 41 Printer Dr iv er Functions (Windows) ■ Cancelling a print job from the BJ Status Monitor 1 Clic k the Canon BJ Status Monitor (Windows Me/Windo ws 98) or Canon S200 - USB001 (Windows XP/Windo ws 2000) icon on the T ask Bar .
Uninstalling Printer Dr iv ers 42 Printer Dr iv er Functions (Windows) Uninstalling Printer Driver s Use the Uninstaller to delete any unw anted pr inter driv ers. This allows y ou to delete all the fi les associated with the printer dr iv er at the same time.
43 Printer Dr iv er Functions (Macintosh) Printer Driver Functions (Macintosh) • Description of Pr int Settings • BJ Print Monitor • Cancelling a Print Job • Using the Printer with a Networ k • Uninstalling Printer Dr iv ers S200.
Description of Pr int Settings 44 Printer Dr iv er Functions (Macintosh) Description of Print Settings • P age Setup Dialog Bo x • Printer Utility Dialog Bo x • Print Dialog Box • Detailed Setting Dialog Bo x • Options Dialog Bo x • Register Settings Dialog Bo x S200.
Description of Pr int Settings 45 Printer Dr iv er Functions (Macintosh) P age Setup Dialog Bo x The P age Setup dialog box contains settings f or the pr inted page , such as the size of the print media, and resizing the pr inted image. T o open the P age Setup dialog bo x, select P age Setup from the File menu in y our application program.
Description of Pr int Settings 46 Printer Dr iv er Functions (Macintosh) (3) Scale Specify the scaling percentage to resize the document f or pr inting.
Description of Pr int Settings 47 Printer Dr iv er Functions (Macintosh) Printer Utility Dialog Bo x The Printer Utility dialog bo x is displa yed when y ou click the Utilities button in the Pag e Setup dialog bo x. (1) Select the function y ou wish to perform.
Description of Pr int Settings 48 Printer Dr iv er Functions (Macintosh) ➡ Print Head Cleaning ➡ Print Head Deep Cleaning ➡ Enab ling Low Ink W ar ning ➡ Print Head Alignment ➡ Setting Ink Dr ying W ait Time S200.
Description of Pr int Settings 49 Printer Dr iv er Functions (Macintosh) Print Dialog Bo x The Print dialog bo x speci fi es the media type and print settings to be used for y our print job . T o open the Print dialog box, select Print from the File menu in your application progr am.
Description of Pr int Settings 50 Printer Dr iv er Functions (Macintosh) (4) Details... Allows y ou to manually set the print quality and colour settings in the Detailed Setting Dialog Bo x . (5) Options... Specify the output destination, print order and page lay out f or the document you are printing.
Description of Pr int Settings 51 Printer Dr iv er Functions (Macintosh) Detailed Setting Dialog Bo x T o open the Detailed Setting dialog bo x, select Manual in the Print dialog bo x and then clic k Details... . ■ Quality panel (1) P anel display icons Clic k these icons to switch betw een panels in the Detailed Setting dialog bo x.
Description of Pr int Settings 52 Printer Dr iv er Functions (Macintosh) (2) Print Quality Mov e the slide bar to adjust the balance between pr int quality and speed. Moving the bar to the right enhances pr int quality , and moving it to the left increases printing speed.
Description of Pr int Settings 53 Printer Dr iv er Functions (Macintosh) ■ Special Effects P anel T o displa y the Special Effects panel, clic k the Special effects displa y icon. (1) Sim ulate illustration This function manipulates colour image with cer tain eff ects.
Description of Pr int Settings 54 Printer Dr iv er Functions (Macintosh) (2) Monochr ome effects Prints a colour image in a single colour . Select the check bo x and choose a colour or use a custom colour using Select Colour / Select Color . (3) Vivid Photo Prints a photo or image data in vivid colour .
Description of Pr int Settings 55 Printer Dr iv er Functions (Macintosh) ■ Colour/Color P anel T o displa y the Colour / Color panel, click the Colour / Color display icon. (1) Colour Correction / Color Correction Select a colour correction method: BJ Standard , ColorSync or None .
Description of Pr int Settings 56 Printer Dr iv er Functions (Macintosh) (2) Print T ype F or pr inting that emphasises intermediate colours, select Photo . F or pr inting that emphasises the brightness of pr imar y colours, select Graphics . For documents that contain large amounts of a basic colour , select Spot Colour / Spot Color .
Description of Pr int Settings 57 Printer Dr iv er Functions (Macintosh) Options Dialog Bo x T o open the Options dialog bo x, click the Options... button in the Print dialog bo x. (1) P age Lay out Use this function to print more than one page on a single sheet of paper .
Description of Pr int Settings 58 Printer Dr iv er Functions (Macintosh) 2 P age/Sheet Printing / 4 P age/Sheet Printing P ages are reduced and pr inted so that two or f our pages fi t on each pr inted page. Y ou can also select page order and whether to place a border around each page.
Description of Pr int Settings 59 Printer Dr iv er Functions (Macintosh) (5) Print in rever se order Prints the document star ting with the last page. (6) Print collated pages Prints multiple copies of the document one cop y at a time. (7) Pre view Area S200.
Description of Pr int Settings 60 Printer Dr iv er Functions (Macintosh) Register Settings Dialog Bo x T o open the Register Settings dialog bo x, click the Apply ... button in the Print dialog bo x. (1) Settings Displa ys a list of the registered pr int settings .
BJ Print Monitor 61 Printer Dr iv er Functions (Macintosh) BJ Print Monitor The BJ Print Monitor allows y ou to check the progress of print jobs. Y ou can launch the BJ Print Monitor if background printing is enab led in the Chooser utility . ■ Opening the BJ Print Monitor 1 Select Chooser from the Apple Menu.
BJ Print Monitor 62 Printer Dr iv er Functions (Macintosh) ■ BJ Print Monitor Functions The BJ Print Monitor allows y ou to change the pr int order of documents queued f or pr inting.
Cancelling a Print Job 63 Printer Dr iv er Functions (Macintosh) Cancelling a Print Job ■ Cancelling a print job with the RESUME/CANCEL button of the printer itself Press the RESUME/CANCEL b utton to ter minate the pr int job . RESUME/CANCEL b utton S200.
Cancelling a Print Job 64 Printer Dr iv er Functions (Macintosh) ■ Cancelling a print job from the BJ status monitor When the BJ Print Monitor is r unning, y ou can use it to cancel or suspend the current print job . 1 Select BJ Print Monitor in the Application Menu.
Using the Printer with a Network 65 Printer Dr iv er Functions (Macintosh) Using the Printer with a Netw ork The printer can be used with an Ether net network environment.
Using the Printer with a Network 66 Printer Dr iv er Functions (Macintosh) 4 Clic k Share . 5 Con fi r m that S200 server is selected in Enter new print server name: then clic k Send . 6 Con fi r m that the ne w pr int ser v er name has been added to Current print servers then clic k Close .
Using the Printer with a Network 67 Printer Dr iv er Functions (Macintosh) ■ Chec king Pr int Status • Chec king pr int status from the print ser ver T o chec k the status of a pr int job from the print ser ver , star t the BJ Print Monitor . Select BJ Print Monitor in the Application Menu.
Using the Printer with a Network 68 Printer Dr iv er Functions (Macintosh) ■ BJ Status Monitor Functions .... Click to pause printing of the speci fi ed document. .... Click to resume printing. .... Click to cancel printing of the speci fi ed document.
Uninstalling Printer Dr iv ers 69 Printer Dr iv er Functions (Macintosh) Uninstalling Printer Driver s When a printer dr iv er is no longer needed, use the Installer to delete, all the progr am fi les associated with it at the same time. Bef ore proceeding, ensure you sa v e any unsa ved fi les in an y currently running applications.
70 Routine Maintenance Routine Maintenance • When to Replace Ink T ank and Maintain Pr int Head • Replacing an Ink T ank • Printing the Nozzle Check P atter n • Print Head Cleaning • Print Head Deep Cleaning • Print Head Alignment • Enab ling Low Ink W ar ning • Setting Ink Dr ying W ait Time • T ranspor ting the Pr inter S200.
When to Replace Ink T ank and Maintain Pr int Head 71 Routine Maintenance When to Replace Ink T ank and Maintain Print Head When printing becomes faint or colours are incorrect, see if the print head nozzles are clogged and clean them fi rst. Follo w the procedures below and replace an ink tank if necessar y .
Replacing an Ink T ank 72 Routine Maintenance Replacing an Ink T ank When replacing an ink tank, chec k the model number v er y carefully . The pr inter will not print properly if the wrong ink tank is used, or installed in the incorrect position.
Replacing an Ink T ank 73 Routine Maintenance 2 Remov e the empty ink tank. Pull the tab on the ink tank tow ards you to release . Then lift it from its slot. Do not touch the loc k lev er ; remov e only the ink tank. Impor tant ➤ • Handle ink tanks carefully to a void staining clothing or the surrounding area.
Replacing an Ink T ank 74 Routine Maintenance 3 Unpac k a new ink tank and remo ve the or ange protective cap . Impor tant ➤ • Do not re-attach the protectiv e cap once you ha v e remov ed it. • Once y ou hav e remov ed the protectiv e cap , do not touch the open ink por t.
Replacing an Ink T ank 75 Routine Maintenance 4 Inser t the ink tank into a slot. S200.book Page 75 Saturday, September 22, 2001 2:34 PM.
Replacing an Ink T ank 76 Routine Maintenance 5 Press on the tab until the ink tank snaps fi r mly into place . 6 Close the front cov er . The car tr idge holder mo ves to the right. The ink tank installation process is now complete . Note ➤ • T o maintain optimal print quality , use an ink tank within six months of fi rst use.
Printing the Nozzle Check P atter n 77 Routine Maintenance Printing the Nozzle Chec k P attern Print the nozzle check patter n to determine whether the ink ejects nor mally from the pr int head nozzles, and to v er ify print head alignment. Use this function when pr inted results are b lurred or the colour is incorrect.
Printing the Nozzle Check P atter n 78 Routine Maintenance Macintosh 1 With the printer on, load a sheet of A4 or Letter paper in the pr inter . 2 Open the P age Setup dialog box. The P age Setup dialog box can be normally opened by selecting Pag e Setup.
Printing the Nozzle Check P atter n 79 Routine Maintenance ■ Printing the Nozzle Check P atter n through the Printer 1 With the printer on, load a sheet of A4 or Letter paper in the pr inter . 2 Press the RESUME/CANCEL b utton twice quickly . ➡ Examining the Nozzle Chec k P atter n S200.
Printing the Nozzle Check P atter n 80 Routine Maintenance ■ Examining the Nozzle Chec k P atter n The nozzle chec k patter n should appear as f ollows when ink is discharged properly . Examine the nozzle chec k patter n output by the printer . Une v enness in these patter ns indicates the print head requires alignment.
Print Head Cleaning 81 Routine Maintenance Print Head Cleaning Clean the print head if you suspect that the nozzles might be clogged. Note ➤ Cleaning the head consumes ink, so perform head cleaning only when necessary. Windows 1 Ensure that the printer is on.
Print Head Cleaning 82 Routine Maintenance Macintosh 1 Ensure the printer is on. 2 Open the P age Setup dialog box. The P age Setup dialog box can normally be opened by selecting Pag e Setup... in the File menu. 3 Clic k the Utilities button to open the Printer Utility dialog bo x.
Print Head Deep Cleaning 83 Routine Maintenance Print Head Deep Cleaning If print quality does not improv e by standard print head cleaning, tr y deep cleaning, which is a more pow erful process. P erform pr int head deep cleaning from the printer dr iv er .
Print Head Deep Cleaning 84 Routine Maintenance Macintosh 1 Ensure the printer is on. 2 Open the P age Setup dialog box. The P age Setup dialog box can normally be opened by selecting Pag e Setup... in the File menu. 3 Clic k the Utilities button to open the Printer Utility dialog bo x.
Print Head Alignment 85 Routine Maintenance Print Head Alignment If the print head is not located at the regulated position, pr inted ruled lines could be misaligned. In such a case, adjust the print head position. ■ Aligning the Print Head Windows 1 With the printer on, load a sheet of A4 or Letter paper in the pr inter .
Print Head Alignment 86 Routine Maintenance Macintosh 1 With the printer on, load a sheet of A4 or Letter paper in the pr inter . 2 Open the P age Setup dialog box. The P age Setup dialog box can be normally opened by selecting Pag e Setup... in the File menu.
Print Head Alignment 87 Routine Maintenance ■ Examining the Print Head Alignment P atter n Windows 1 Look at the print-out. F rom the patter ns in Column A, select the most e v en, least irregular patter n and enter the number .
Print Head Alignment 88 Routine Maintenance 2 In the same wa y , one by one , select the most e ven patterns pr inted with the least irregularities from each of Columns B to E, enter their numbers, and clic k OK .
Print Head Alignment 89 Routine Maintenance Macintosh 1 Look at the print-out. F rom the patter ns in Column A, select the most e v en, least irregular patter n and enter the number .
Print Head Alignment 90 Routine Maintenance 2 In the same wa y , one by one , select the most e ven patterns pr inted with the least irregularities from each of Columns B to E, enter their numbers and clic k Send .
Enabling Lo w Ink W ar ning 91 Routine Maintenance Enabling Lo w Ink W arning The low ink w ar ning can be enab led/disabled from the printer dr iv er . This noti fi es you of lo w ink le v els dur ing printing. ■ How Lo w Ink W ar ning W or ks Enab le a low ink warning when installing a new ink tank.
Enabling Lo w Ink W ar ning 92 Routine Maintenance ■ Low Ink W ar ning Displa y The '!' shows a lo w ink le vel in the ink tank. BJ Status Monitor (Windows) BJ Status Dialog (Macintosh) The colour ink becomes low . The colour ink becomes low .
Enabling Lo w Ink W ar ning 93 Routine Maintenance Note ➤ When the background printing is enabled, the low ink warning is displayed on the BJ Print Monitor (Macintosh).
Enabling Lo w Ink W ar ning 94 Routine Maintenance ■ Setting Low Ink W ar ning Note ➤ Reset the ink counter every time installing a new ink tank when the low ink warning is enabled.
Enabling Lo w Ink W ar ning 95 Routine Maintenance 3 Select Low Ink W arning from the pull-down menu and clic k the Remaining ink level setting icon. 4 Select Displa y low ink warning and clic k Send . • Resetting Ink Counter Note ➤ Do not reset an ink counter of an ink tank already in use.
Enabling Lo w Ink W ar ning 96 Routine Maintenance 3 Select Remaining ink level setting from the pull-do wn menu and click Ink Counter Reset . 4 Select the ink tank y ou hav e just installed and click Execute .
Setting Ink Dr ying Wait Time 97 Routine Maintenance Setting Ink Drying W ait Time When y ou set the ink dr y-up time lev el, you can specify the printer which pr inting characteristic is pref erred; pr inting speed or quality .
Setting Ink Dr ying Wait Time 98 Routine Maintenance Macintosh 1 Ensure the printer is on and open the P age Setup dialog bo x. The P age Setup dialog box can normally be opened by selecting Pag e Setup... in the File menu. 2 Clic k the Utilities button to open the Printer Utilities dialog bo x.
T ranspor ting the Printer 99 Routine Maintenance T ranspor ting the Printer P ack the printer carefully in its or iginal pac king mater ials . If y ou do not hav e the or iginal pac king mater ials , pack the printer carefully and thoroughly in protectiv e mater ial inside of a sturdy bo x.
T ranspor ting the Printer 100 Routine Maintenance 2 Remov e the paper rest and the paper output tra y . 3 Disconnect the printer cable from the computer and from the printer , and then disconnect the pow er cord from the pr inter .
T ranspor ting the Printer 101 Routine Maintenance 4 Secure the printer with adhesive tape as sho wn, and then pack it in a plastic bag. S200.book Page 101 Saturday, September 22, 2001 2:34 PM.
T ranspor ting the Printer 102 Routine Maintenance 5 Attach protectiv e mater ial to both sides of the printer when packing the printer . Clearly label the box as “ F ragile ” , if using a tr anspor t company .
103 Printing Media Printing Media • Compatib le Media T ypes • En velopes • High Resolution P aper HR-101N • Glossy Photo P aper GP-301N/GP-301 • High Gloss Photo Film HG-201 • Glossy Phot.
Compatible Media T ypes 104 Printing Media Compatible Media T ypes Y ou can use the f ollowing types of paper and other media. ■ Size • Standard paper : F rom A5 size (148.0 x 210.0 mm / 5.83 x 8.27 in) to legal size (215.9 x 355.6 mm / 8.5 x 14.0 in) • Non-standard paper : F rom 100.
Compatible Media T ypes 105 Printing Media ■ W eight 64 to 105 g/m 2 (17 to 28 lb) Do not use paper hea vier than this, as it could jam in the printer . ■ T ypes The f ollowing types of media can be used. F or more inf or mation about the media and the pr inting methods , ref er to the speci fi c sections.
Env elopes 106 Printing Media En velopes Use either European DL or US Com. #10 size env elopes. ■ Preparation f or Pr inting 1 Press down on all f our cor ners and edges of the env elopes to fl atten them as shown belo w . 2 If the en velopes are curled, hold the opposite cor ners and gently bend them in the opposite direction.
Env elopes 107 Printing Media 3 If the leading edge of an en velope is puff ed up or cur led, use a pen to press the en velope fl at and shar pen the crease . The en velopes ma y jam in the pr inter if the y are not completely fl at and the edges are not aligned.
Env elopes 108 Printing Media ■ Loading • Place en velopes lengthwise with the fl ap to the left and the address side f acing upwards . • Set the paper thic kness lev er to the r ight. • Up to 5 en velopes can be loaded at once . P aper thickness le v er P aper guide S200.
Env elopes 109 Printing Media ■ Printer Dr iv er Settings • Media T ype : Env elope • P age Size : Select either DL En v . or #10 En v . according to the env elope size y ou are using • Orientation : P or trait ■ Handling of Printed Output Remov e each env elope as it is pr inted.
High Resolution P aper HR-101N 110 Printing Media High Resolution P aper HR-101N This type of paper provides better colour reproduction than plain paper . It is suitable f or printing business documents that f eature gr aphics, and f or photographs . ■ Loading • Load the paper with the whiter side f acing up .
High Resolution P aper HR-101N 111 Printing Media ■ Printer Dr iv er Settings • Media T ype : High Resolution P aper • P age Size : Ensure the setting matches the siz e set in the application. ■ Handling of Printed Output Do not stac k more than 20 sheets in the paper output tra y .
Glossy Photo P aper GP-301N/GP-301 112 Printing Media Glossy Photo P aper GP-301N/GP-301 This media is still thic ker than High Resolution P aper with a glossy pr inting surf ace to produce print-outs close to photograph quality . ■ Loading • Load the paper with the whiter side f acing up .
Glossy Photo P aper GP-301N/GP-301 113 Printing Media Note ➤ When printing on Glossy Photo Paper GP-301, do not use any loading support sheet. ■ Printer Dr iv er Settings • Media T ype : Glossy Photo P aper • P age Size : Ensure the setting matches the siz e set in the application.
High Gloss Photo Film HG-201 114 Printing Media High Gloss Photo Film HG-201 This fi lm has an e xtremely glossy surf ace, ideal f or printing photographs with outstanding results. ■ Loading • Load only one sheet at a time. • Load the fi lm with the cut cor ner at the upper right.
High Gloss Photo Film HG-201 115 Printing Media ■ Printer Dr iv er Settings • Media T ype : High Gloss Photo Film • P age Size : Ensure the setting matches the siz e set in the application. ■ Handling of Printed Output • Remov e each sheet as soon as it is pr inted.
Glossy Photo Cards FM-101 116 Printing Media Glossy Photo Car ds FM-101 Made of the same material as Glossy Photo P aper GP-301, this photo-size paper is intended f or pr inting images that co ver the entire surf ace of the card, without a white border .
Glossy Photo Cards FM-101 117 Printing Media ■ Printer Dr iv er Settings • Media T ype : Glossy Photo P aper • P age Size : Select custom siz e and enter 119.6 x 215.9 mm (4.7 x 8.5 in). ■ Applications Settings Enter 109.6 x 160.4 mm (4.31 x 6.
Photo P aper Pro PR-101 118 Printing Media Photo P aper Pr o PR-101 This is thic k paper with a treated surface that enhances gloss and pro vides super ior colour reproduction. It is ideal for printing high quality photographs . ■ Loading • Load only one sheet at a time.
Photo P aper Pro PR-101 119 Printing Media ■ Printer Dr iv er Settings • MediaT ype : Photo P aper Pro • P age Size : Ensure the setting matches the siz e set in the application. ■ Handling of Printed Output • Remov e each sheet as soon as it is pr inted.
Photo P aper Pro PC-101S 120 Printing Media Photo P aper Pr o PC-101S Made of the same material as Photo P aper Pro PR-101, this photo-size paper is intended f or pr inting images that co ver the entire surf ace of the card, without a white border .
Photo P aper Pro PC-101S 121 Printing Media ■ Printer Dr iv er Settings • Media T ype : Photo P aper Pro • P age Size : Select Custom Size and enter 118.6 x 215.9mm (4.67 x 8.5 in). ■ Applications Settings Enter 109.6 x 160.4mm (4.31 x 6.31 in) in Image Size .
T ransparencies CF-102 122 Printing Media T ransparencies CF-102 This fi lm is ideal f or pr inting presentation material f or use with ov erhead projectors. Note ➤ For the customers in the United States, refer to the Quick Start Guide for instructions on using TR-101 T-shirt transfers.
T ransparencies CF-102 123 Printing Media • Although y ou can pr int on either side of CF-102, best results can be obtained b y printing on the side toward which it curls when held b y the edge. ■ Printer Dr iv er Settings • Media T ype : T ransparency • P age Size : Ensure the setting matches the siz e set in the application.
T -Shir t T ransf ers TR-201 124 Printing Media T -Shir t T ransfer s TR-201 This paper is used to produce iron-on transf ers. The image is printed backw ards when Media T ype is set to T -Shir t T ransf er in the pr inter driver .
T -Shir t T ransf ers TR-201 125 Printing Media ■ Printer Dr iv er Settings • Media T ype : T -Shir t T ransf er • P age Size : Ensure the setting matches the siz e set in the application. ■ Handling of Printed Output • Remov e each T -shir t transf er as soon as it is pr inted.
Banner P aper 126 Printing Media Banner P aper This is long paper that consists of consecutiv e sheets of A4 or Letter size paper , ideal f or printing long posters or banners (up to six sheets long). ■ Preparation f or Pinting • When tearing the banner paper , tear off one more sheet than y ou actually need to pr int.
Banner P aper 127 Printing Media 3 Place the printer where the pr inted banner output can hang ov er the edge of the tab le. Ensure the ink does not stain the tab le or fl oor .
Banner P aper 128 Printing Media ■ Printer Dr iv er Settings • Media T ype : Plain P aper • P age Size : When using A4 banner paper : A4 When using letter size banner paper: Letter • Printing T ype : Banner Printing On a Macintosh, bef ore creating the document, select Banner Printing in the P age Setup dialog bo x.
129 T roubleshooting T r oubleshooting • Cannot Install the Printer Dr iv er • Print Quality is P oor or Contains Errors • Printer Does Not Star t or Stops Dur ing Print Jobs • P aper Does Not.
Cannot Install the Printer Dr iv er 130 T roubleshooting Cannot Install the Printer Driver ■ Follow the installation pr ocedure correctly . Install the printer dr iv er carefully f ollowing the procedures described in the Quick Star t Guide . If the printer dr iv er was not installed correctly , reinstall it.
Cannot Install the Printer Dr iv er 131 T roubleshooting ■ If the Installer f or the printer driver does not star t up automatically when y ou insert the Setup Software & User’ s Guide CD-ROM , open the My Computer window , and then double-c lick the CD-R OM icon.
Print Quality is P oor or Contains Errors 132 T roubleshooting Print Quality is P oor or Contains Error s • Cannot Print to End of Job • Colours are Unclear • Meaningless Characters or Symbols a.
Print Quality is P oor or Contains Errors 133 T roubleshooting Cannot Print to End of Job ■ Confirm the P age Size setting matches the size of the paper loaded in the printer .
Print Quality is P oor or Contains Errors 134 T roubleshooting Colour s are Unclear ■ Confirm the Media T ype setting in the printer driver matches the type of paper loaded in the printer . If y ou are pr inting a photogr aph or an illustration from a Windows en vironment, also increase Print Quality on the Main tab .
Print Quality is P oor or Contains Errors 135 T roubleshooting Meaningless Character s or Symbols are Printed ■ If the pr oblem only occur s when printing a specific document, try editing the document and then printing it. If this does not resolv e the problem, there ma y be a problem with y our application progr am.
Print Quality is P oor or Contains Errors 136 T roubleshooting Printing is Blurred/Colour s are Wrong ■ Print the nozzle chec k pattern to ensure that ink is output correctly . If the nozzle chec k patter n does not pr int correctly , clean the pr int head.
Print Quality is P oor or Contains Errors 137 T roubleshooting Straight Lines are Misaligned ■ Align the print head. Windows 1 Open the Printer Proper ties dialog bo x. ➡ Opening the Printer Proper ties Dialog Bo x 2 Clic k the Maintenance tab . 3 Clic k Print Head Alignment .
Print Quality is P oor or Contains Errors 138 T roubleshooting Macintosh 1 Open the P age Setup dialog box. The P age Setup dialog box can normally be opened by selecting Pag e Setup... in the File menu. 2 Clic k the Utilities button. 3 Select T est Print from the pull-down menu, and then clic k Print Head Alignment .
Print Quality is P oor or Contains Errors 139 T roubleshooting ■ In the printer driver settings, select a higher print quality setting. Windows 1 Open the Printer Proper ties dialog bo x. ➡ Opening the Printer Proper ties Dialog Bo x 2 On the Main tab , click High f or the Print Quality setting.
Print Quality is P oor or Contains Errors 140 T roubleshooting Printed P aper Curls or Ink Blots ■ Use high resolution paper or photo paper to print images that require a lot of ink, (i.e . pictures with intense colours or photographs). ■ Reduce the Intensity setting in the printer driver and try printing again.
Print Quality is P oor or Contains Errors 141 T roubleshooting Macintosh 1 Open the Print dialog box. The Print dialog box can normally be opened by selecting Print in the File menu. 2 F or Print Mode , select Man ual and then click Details . 3 Clic k the Colour / Color icon and then drag the Intensity slide bar to set the intensity .
Print Quality is P oor or Contains Errors 142 T roubleshooting Bac k of P aper is Smudged ■ If the next pa g e prints bef ore the ink is dry , clic k and draw the Ink Dry-Up Time slider to the rightmost position.
Print Quality is P oor or Contains Errors 143 T roubleshooting Macintosh 1 Open the P age Setup dialog box. The P age Setup dialog box can normally be opened by selecting Pag e Setup... in the File menu. 2 Clic k the Utilities button. 3 Select Custom Settings f or m the pull-down men u.
Print Quality is P oor or Contains Errors 144 T roubleshooting Printed Surface is Scratched ■ Ensure y ou are using suitable paper . • The paper weight m ust be less than 105 g/m 2 (28 lb). If y ou use paper heavier than 105 g/m 2 (28 lb), the print head ma y scratch the printed surf ace.
Print Quality is P oor or Contains Errors 145 T roubleshooting Windows 1 Open the Printer Proper ties dialog bo x. ➡ Opening the Printer Proper ties Dialog Bo x 2 On the Main tab , select Manual f or Colour Adjustment / Color Adjustment , and then clic k Set .
Print Quality is P oor or Contains Errors 146 T roubleshooting White Streaks ■ Print the nozzle chec k pattern to chec k the ink output. If a speci fi c colour does not print in the nozzle check patter n, clean the print head. ➡ Printing the Nozzle Check P atter n ➡ Print Head Cleaning S200.
Print Quality is P oor or Contains Errors 147 T roubleshooting Colour s are Uneven or Streaked ■ Increase the print quality setting in the printer driver settings. Windows 1 Open the Printer Proper ties dialog bo x. ➡ Opening the Printer Proper ties Dialog Bo x 2 On the Main tab , click High f or the Print Quality setting.
Print Quality is P oor or Contains Errors 148 T roubleshooting ■ Set the halftoning method to Diffusion in the printer driver settings. Windows 1 Open the Printer Proper ties dialog bo x. ➡ Opening the Printer Proper ties Dialog Bo x 2 On the Main tab , select Custom for the Print Quality setting, and click Set .
Printer Does Not Star t or Stops Dur ing Print Jobs 149 T roubleshooting Printer Does Not Star t or Stops During Print Jobs • Printing Does Not Star t • Printing Stops Before It is Completed • Printer Mov es But Does Not Pr int • Car tr idge Holder Does Not Mov e S200.
Printer Does Not Star t or Stops Dur ing Print Jobs 150 T roubleshooting Printing Does Not Star t ■ Ensure the printer is turned on. Chec k to see if the pr inter is plugged into the pow er outlet securely . Note ➤ When printing a large amount of data such as a photo or graphics, it takes longer than usual to begin printing.
Printer Does Not Star t or Stops Dur ing Print Jobs 151 T roubleshooting ■ Ensure the correct printer driver is selected. In Windows, ensure that Canon S200 is selected in the Print dialog box. In Macintosh, ensure that S200 is selected in the Chooser .
Printer Does Not Star t or Stops Dur ing Print Jobs 152 T roubleshooting Printing Stops Bef ore It is Completed ■ When the printer is pr ocessing a large amount of data.
Printer Does Not Star t or Stops Dur ing Print Jobs 153 T roubleshooting Printer Mo ves But Does Not Print ■ Print the nozzle chec k pattern to ensure that ink is output correctly . If the nozzle chec k patter n does not pr int correctly , clean the pr int head.
Printer Does Not Star t or Stops Dur ing Print Jobs 154 T roubleshooting Car tridge Holder Does Not Move ■ Ensure the printer is turned on. The car tr idge holder will not mo ve unless the po wer is on. Check to see if the printer is plugged into the pow er outlet securely .
P aper Does Not F eed Proper ly or P aper Jams 155 T roubleshooting P aper Does Not Feed Pr operly or P aper Jams • P aper Does Not F eed Proper ly • P aper Jams S200.
P aper Does Not F eed Proper ly or P aper Jams 156 T roubleshooting P aper Does Not Feed Pr operly ■ Confirm the paper conditions. • The paper is not too thic k (less than 105g/m 2 / 28 lb). • The number of sheets loaded does not e xceed the recommended lev el.
P aper Does Not F eed Proper ly or P aper Jams 157 T roubleshooting P aper Jams Remov e the paper according to the follo wing procedure. 1 Slowly pull the paper out, either from the sheet f eeder or from the paper output slot, whiche v er is easier . If the paper tears and a piece remains inside the printer , open the front cov er and remov e it.
An Error Message is Displa yed on the Screen 158 T roubleshooting An Err or Message is Displa yed on the Screen • Error Wr iting to USBxxx • Application Error or General Protection F ault • Other Error Messages • Other Error Messages Windows Windows Windows Macintosh S200.
An Error Message is Displa yed on the Screen 159 T roubleshooting Err or Writing to USBxxx ■ Ensure the printer is turned on. The car tr idge holder will not mo ve unless the po wer is on. Check to see if the printer is plugged into the pow er outlet securely .
An Error Message is Displa yed on the Screen 160 T roubleshooting In Windows XP/Windows 2000, clic k the Adv anced tab and then click Print directly to the printer . ■ V erify the USB por t status. 1 Right-clic k My Computer and select Properties . In Windows XP , clic k the Star t button, then right-clic k My Computer and select Pr oper ties .
An Error Message is Displa yed on the Screen 161 T roubleshooting ■ Ensure that the printer por t setting corresponds to the printer interface connection.
An Error Message is Displa yed on the Screen 162 T roubleshooting Application Err or or General Pr otection F ault ■ Ensure the application pr ogram you are using is intended f or y our operating system. F or e xample, if y ou attempt to pr int with a Windows 3.
An Error Message is Displa yed on the Screen 163 T roubleshooting ■ Chec k the amount of free space on the hard disk. Y ou ma y need to increase the amount of free space by deleting an y unnecessar y fi les. ■ If the pr oblem only occur s when printing a specific document, try editing the document and then printing it.
An Error Message is Displa yed on the Screen 164 T roubleshooting Other Err or Messages ■ If the BJ Status Monitor is displa yed, f ollow the instructions on screen. If an error occurs during pr inting, the BJ Status Monitor displa ys the error on the Printer Status tab .
An Error Message is Displa yed on the Screen 165 T roubleshooting ■ If one of the f ollowing messages is displa yed outside of the BJ Status Monitor: Could not spool successfully due to insufficient disk space Increase the amount of free space on the disk b y deleting any unnecessar y fi les.
An Error Message is Displa yed on the Screen 166 T roubleshooting Other Err or Messages ■ If a message with the f ormat “Error No.: Xn” (where “X” represents a letter and “n” represents a number) is displa yed: Err or No.: X202 Not enough memor y f or pr inting.
Low Ink W ar ning Displa ys Ink T ank with '?' 167 T roubleshooting Lo w Ink W arning Displa ys Ink T ank with '?' The ink le v el of an ink tank display ed with a '?' is not synchronised with its ink counter .
Low Ink W ar ning Displa ys Ink T ank with '?' 168 T roubleshooting Macintosh Note ➤ When the background printing is enabled, the low ink warning displays on the BJ Print Monitor (Macintosh). ➡ BJ Print Monitor ■ Reset the ink counter fr om the printer driver when you replace the ink tank.
Low Ink W ar ning Displa ys Ink T ank with '?' 169 T roubleshooting Macintosh 1 Ensure the printer is on and open the P age Setup dialog bo x. The P age Setup dialog box can normally be opened by selecting Pag e Setup... in the File menu. 2 Clic k the Utilities icon to open the Pr inter Utilities dialog bo x.
Problems Unique to Windows 170 T roubleshooting Pr oblems Unique to Windows • The BJ Status Monitor is Not Displa y ed • Cannot Print in Background (Windo ws Me/Windows 98 only) Windows S200.
Problems Unique to Windows 171 T roubleshooting The BJ Status Monitor is Not Displa yed ■ Ensure “Enable bi-directional support for this printer” is selected.
Problems Unique to Windows 172 T roubleshooting Cannot Print in Bac kgr ound (Windows Me/Windo ws 98 onl y) ■ Chec k the amount of free space on the hard disk. Bac kground pr inting requires a cer tain amount of disk space. Y ou ma y need to delete unnecessar y fi les, or disab le bac kground pr inting.
Problems Unique to the Macintosh 173 T roubleshooting Pr oblems Unique to the Macintosh • J agged T e xt or Graphics , or Banded Gradations • Cannot Print in Background Macintosh S200.
Problems Unique to the Macintosh 174 T roubleshooting Jag g ed T ext or Graphics, or Banded Gradations ■ Ensure y our application suppor ts Quic k Draw . If y ou are using a P ostScript-compatible application, printed te xt and lines may appear jagged and gr adations may appear banded.
Problems Unique to the Macintosh 175 T roubleshooting Cannot Print in Bac kgr ound ■ Ensure bac kground printing is enabled. 1 In the Apple menu, select Chooser . 2 Clic k Backgr ounding on. ■ Chec k the amount of free space on the hard disk. Bac kground pr inting requires a cer tain amount of disk space.
176 Appendices Appendices • Deleting an Unknown De vice Windows S200.book Page 176 Saturday, September 22, 2001 2:34 PM.
Deleting an Unknown De vice 177 Appendices Deleting an Unkno wn Device If printer dr iv er installation was not successful, carr y out the procedure described in “ Notes on Handling the USB interf ace (f or Windows Users) ” in the Quic k Star t Guide .
Deleting an Unknown De vice 178 Appendices • If the unknown de vice is under Universal serial b us controller • If the unknown de vice is under Other devices S200.
Deleting an Unknown De vice 179 Appendices 4 When the con fi r mation message appears , click OK . 5 Clic k Close to close the System Properties window . In Windows XP/Windows 2000, clic k and then click OK in the System Pr oper ties window . 6 Clic k at the top right of the Control P anel window to close it.
180 Specifications Specifications Printing method: Bubb le Jet on-demand Printing resolution: 2880 (horizontal) × 720 (v er tical) dpi.* max. * Ink droplets can be placed with a pitch of 1/2880 inch at minimum. Print speed (pr inting with Canon standard patter n): Blac k pr inting Draft: 5.
181 Specifications Receiv e buff er : 64 KB Interf ace: USB -compatib le Interf ace connector : USB standard Series B receptacle (USB interface) Recommended printer cable: Material: A WG28 (data wir ing pair) or A WG20 to 28 (distr ibution pair) T ype: T wisted-pair shielded cab le Length: Up to 5.
182 Specifications P ow er supply: Europe A C 230 V±10%, 50 Hz USA/Canada A C 120-127 V , 60 Hz A ustralia A C 240 V , 50 Hz P ow er consumption: Standb y: Appro x. 2 W Printing: Appro x. 18 W Ev en though you do not use the printer , it consumes a little power unless y ou unplug it.
183 Specifications ■ F eed method: Continuous f eed through auto sheet feeder F or Plain P aper , Env elopes, High Resolution P aper , Glossy Photo P aper , High Gloss Photo Film, Glossy Photo Cards, Photo P aper Pro , T ransparencies , T -shir t T ransf ers, Banner P aper ■ Sheet f eeder capacity: Plain P aper (75 gsm) 50 sheets max.
184 Specifications ■ Ordinar y pr int media: Regular size: A4, A5, B5, Letter , Legal, European DL, US Com.#10 Custom size: width: 100.0 to 241.3 mm (3.
185 Specifications ■ Graphic image printing: Data f or mat: Canon e xtended mode: Raster image f or mat Resolution: Canon extended mode: 360, 720, 2880 dpi ■ Print Head: Blac k: 64 nozzles (360 dpi) Cy an, Magenta, Y ellow: 24 nozzles per each colour (360 dpi) ■ Ink T anks: Capacity: Blac k (BCI-24 Black) approx.
186 Specifications ■ Printer dr iv er operating en vironment: IBM PC/A T -compatib le computer r unning on Windows XP , Windows Me, Windows 2000, Windows 98 or Macintosh computers with USB interf ace r unning on Mac OS 8.6 - Mac OS 9.X ■ Hard disk space: Appro x.
187 Specifications ■ Printing Area T o ensure the best print quality , the pr inter allows a margin along each edge of media. Printing area (dar k b lue): Canon recommends that y ou pr int within this area. () Printable area (light b lue): The area where it is possible to print.
188 Specifications A4, B5, A5 Size Printable Area (width x height) A4 203.2 × 287.0 mm / 8.0 × 11.3 in B5 175.2 × 247.0 mm / 6.9 × 9.8 in A5 141.2 × 200.0 mm / 5.6 × 7.9 in Recommended printing area Printable area 3.0 mm / 0.12 in 25.4 mm / 1.0 in 23.
189 Specifications Letter , Legal Size Printable Area (width x height) Letter 203.2 × 269.4 mm / 8.0 × 10.6 in Legal 203.2 × 345.6 mm / 8.0 × 13.7 in Recommended printing area Printable area 3.0 mm / 0.12 in 28.0 mm / 1.1 in 7.0 mm / 0.28 in 26.5 mm / 1.
190 Specifications Glossy Photo Car ds Size Printable Area (width x height) Glossy Photo Card 109.4 × 159.9 mm / 4.3 × 6.3 in Recommended printing area (Printable area is the same .) 28.0 mm / 1.1 in 26.0 mm / 1.02 in 5.1 mm / 0.2 in 4.1 mm / 0.16 in S200.
191 Specifications Photo P aper Pro (PC-101S) Note ➤ The printing area of Photo Paper Pro PR-101 is identical to that of A4 size paper. For details, refer to ” A4, B5, A5 ” . Size Printable Area (width x height) Photo P aper Pro PC-101S 109.6 × 160.
192 Specifications En velopes Size Printable Area (width x height) European DL 203.2 × 100.0 mm / 8.0 × 3.9 in US Com. #10 203.2 × 94.8 mm / 8.0 × 3.7 in Printable area 3.0 mm / 0.12 in 7.0 mm / 0.28 in 6.4 mm / 0.25 in European DL: 10.4 mm / 0.41 in US Com.
193 Specifications Banner P aper Size Printable Area (width x height) Banner P aper A4: 203.2 × 1772.0 mm / 8.0 × 69.8 in Letter : 203.2 × 1666.4 mm / 8.0 × 65.6 in Recommended printing area Printable area 25.4 mm / 1.0 in 3.0 mm / 0.12 in 7.0 mm / 0.
194 Inde x A Application Error 162 B Background printing (Macintosh) 61 Background printing (Windows) 172 Banner Paper 126 BCI-24 Black 72 BCI-24 Color 72 BJ Print Monitor (Macintosh) 61 BJ Status Dia.
195 Inde x D Deep Cleaning 35, 83 Deleting an Unknown Device (USB interface) 177 Duplex Printing 27 E Enabling Low Ink Warning 91 Envelopes 106 Error Message 158, 164, 166 F Front cover 16, 154 G Gamm.
196 Inde x L Low Ink Warning 36, 91 Low Ink Warning Displays Ink Tank with '?' 167 M Media Type (Macintosh) 49 Media Type (Windows) 24 N Network (Macintosh) 65 Nozzle Check Pattern 80 O Open.
197 Inde x [Print] Dialog Box (Macintosh) 49 Print Head Lock Lever 18 Print Mode (Macintosh) 49 Print server (Macintosh) 65 Printable area 187 Printer Driver (Macintosh) 43 Printer Driver (Windows) 20.
198 Inde x U Uninstalling Printer Drivers (Macintosh) 69 Uninstalling Printer Drivers (Windows) 42 USB interface 177 USB Port 17, 160 V Vivid Photo 32 W When to Replace Ink Tank and Maintain Print Head 71 S200.
An important point after buying a device Canon S 200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Canon S 200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Canon S 200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Canon S 200 you will learn all the available features of the product, as well as information on its operation. The information that you get Canon S 200 will certainly help you make a decision on the purchase.
If you already are a holder of Canon S 200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Canon S 200.
However, one of the most important roles played by the user manual is to help in solving problems with Canon S 200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Canon S 200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
