Instruction/ maintenance manual of the product Pocket Guide G2 Canon
Go to page of 15
S HORT C OURSES ( HTTP :// WWW . SHORTCOURSES . COM ) 1 A S HORT C OURSE P OCKET G UIDE TO THE C ANON P OWER S HOT G2 Dennis P. Curtin http://www.shortcourses.com COVER © C OPYRIGHT 2001 BY D ENNIS P. C URTIN 2 SHORTCOURSES.COM PUBLISHING PROGRAM A Short Course Pocket Guide Canon PowerShot G2 © Copyright 2001 by Dennis P.
S HORT C OURSES ( HTTP :// WWW . SHORTCOURSES . COM ) 3 PREFACE Short Courses prides itself on providing helpful and accurate information to the digital photography community. This Pocket Guide and others like it are made available at no cost to help you enioy your camera better and get the most out of it.
S HORT C OURSES ( HTTP :// WWW . SHORTCOURSES . COM ) 5 Using Manual Focus ....................................................................... 8 Linking Spot Metering to the AF Frame .......................................... 9 Using Focus Lock for Maximum Depth of Field .
S HORT C OURSES ( HTTP :// WWW . SHORTCOURSES . COM ) 7 ■ Flash/Index selects flash modes in shooting mode (pages 85) and displays small thumbnail images in replay mode (page 14).
S HORT C OURSES ( HTTP :// WWW . SHORTCOURSES . COM ) 9 ■ To erase an image press * (asterisk) and press SET when the confirmation prompt appears with Erase highlighted. ■ To erase all images that aren’t protected, press MENU, press the down point on the Omni Selector to highlight Erase all , and press SET to display a confirmation message.
S HORT C OURSES ( HTTP :// WWW . SHORTCOURSES . COM ) 11 CHANGING EXPOSURE MODES ■ ■ ■ ■ ■ With the camera on and in shooting mode (the red camera icon), turn the Mode Dial so one of the modes aligns with the index mark on the camera body. USING IMAGE ZONE MODES 1.
S HORT C OURSES ( HTTP :// WWW . SHORTCOURSES . COM ) 13 USING AE LOCK 1. With the camera on and in shooting mode, set the Mode Dial to any Creative Zone mode other than M (manual) and turn on the monitor.
S HORT C OURSES ( HTTP :// WWW . SHORTCOURSES . COM ) 15 CHANGING THE ISO 1. With the camera on, set the Mode Dial to any Creative Zone mode. 2. Press MENU, then press the down point on the Omni Selector to highlight ISO Speed .
S HORT C OURSES ( HTTP :// WWW . SHORTCOURSES . COM ) 17 LINKING SPOT METERING TO THE AF FRAME 1. With the camera on and in any Creative Zone mode, press MENU. 2. Press the down point on the Omni Selector to highlight Spot AF Point and press the left or right point to select Center (the default) or AF Point .
S HORT C OURSES ( HTTP :// WWW . SHORTCOURSES . COM ) 19 white balance icon bar on the monitor. (The first time you press it, you display the exposure compensation scale.) 3. Press the right or left point on the Omni Selector to high- light the icon for the white balance mode you want to use (AWB is the default).
S HORT C OURSES ( HTTP :// WWW . SHORTCOURSES . COM ) 21 USING SLOW SYNC FLASH 1. Set the camera to Night Scene mode. 2. Take the photo. USING FLASH EXPOSURE LOCK 1. With the camera on and in shooting mode, set the Mode Dial to any mode in the Creative Zone.
S HORT C OURSES ( HTTP :// WWW . SHORTCOURSES . COM ) 23 Dial to Stitch Assist mode. 2. Use the right or left button on the Omni Selector to high- light one of the sequence icons and press the SET button to select it . 3. Take the first picture and when the upper indicator stops flashing the image is displayed on the monitor.
S HORT C OURSES ( HTTP :// WWW . SHORTCOURSES . COM ) 25 Omni Selector to scroll through the images. Press the up point to increase or decrease the number of copies for the current image. (The default is 0.) The number of copies of that image, and the running total of all images are dis- played at the top of the monitor.
S HORT C OURSES ( HTTP :// WWW . SHORTCOURSES . COM ) 27 MANAGING IMAGE FILES 1. With the camera on and in any shooting mode, press the MENU button. 2. Do one of the following: ■ Press the down or up point on the Omni Selector to highlight Review and press the right or left point to select 2 sec (the default), 10 sec , or Off .
S HORT C OURSES ( HTTP :// WWW . SHORTCOURSES . COM ) 29 D-STORE The Digital Wallet is a Portable Smart Storage (PSS) device that goes beyond conventional storage by adding mobility and versatility. With it’s own microprocessor, operating system, 2.
An important point after buying a device Canon Pocket Guide G2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Canon Pocket Guide G2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Canon Pocket Guide G2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Canon Pocket Guide G2 you will learn all the available features of the product, as well as information on its operation. The information that you get Canon Pocket Guide G2 will certainly help you make a decision on the purchase.
If you already are a holder of Canon Pocket Guide G2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Canon Pocket Guide G2.
However, one of the most important roles played by the user manual is to help in solving problems with Canon Pocket Guide G2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Canon Pocket Guide G2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
