

Back On Your Network After A Router Or Network Change
PIXMA MX492
Mac OS

If any of the following situations exist
Please complete the following steps to apply the new configuration settings to your multifunction.

Network Requirements Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network.

Wireless Connection Before connecting the machine to the network, the computer needs to be connected to the network. Make sure that configuration of the computer and access point or router is complete.



To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. Installation time varies depending on the computer environment or the number of application software to be installed.

When you reinstall your printer on your network because of a router or network change, you follow the same procedure as for a first time install. A step-by-step walk through of the wireless setup is built into the installation routine of the software for your PIXMA.
To begin setup of your PIXMA MX492 on your wireless network, you must first download the software to your computer. Access the MX490 series Setup page, read the instructions, then click the Download button.
After the file has downloaded successfully (default location is the Downloads folder), double-click it to start the install procedure.
The setup instructions presented in this document describe the “Cableless Setup” method which does not require the need to know the SSID (network name), or network passphrase and does not require the printer to be temporarily connected to the computer with a USB cable.
Click Next on the first screen. If prompted, enter the Administrative Password to continue.



Click Start Setup Again if the following screen appears.


Click Next if the following screen appears.


On the following screen, select Wireless LAN Connection, then click Next.


On the following screen, select Access Point Connection, then click Next.


Continue following on-screen instructions. On the Printers on Network List screen, check the Setting printer could not be found on the list checkbox and click Next.


Carefully follow the instructions on the Printer Setup screens 1-1 and 1-2 to select Wireless LAN setup on your machine.



Continue to follow on-screen instructions. On the Setup Procedure Selection screen, if your printer’s display looks like the example on the left (above Push Button Method), press the machine’s Stop button, then click Other Methods on the Setup Procedure Selection screen (2-1). If the printer’s display already is like the example on the right , click Other Methods.


Continue to follow on-screen instructions.
Select Cableless setup on the Setup Procedure Selection screen (2-2).


Carefully follow the instructions on the Connection via Cableless setup screens 3-1 and 3-2 to select Cableless setup on your printer. Click Next after completing each step.



When the printer displays “Follow the instructions on the PC or smartphone, etc.”, click Next on the Connection via Cableless setup screen. (3-3).


Click Next on the Connection completed screen.


Continue following on-screen instructions. On the Software Installation List, select *software to install and click Next.
*MP Drivers is required and cannot be deselected. We recommend installing My Image Garden and Quick Menu to take full advantage of the printer’s features. It is not necessary to reinstall My Image Garden and Quick Menu if they were previously installed


Continue following on-screen instructions. On the Canon IJ Network Tool screen, select the MX490 series and click Next.


Continue following the on-screen instructions. When the Add Printer screen appears, click Add Printer.


Select the Canon MX490 series with Canon IJ Network listed in the Kind column, then click Add.


Click Next on the Add Printer screen


Continue following on-screen instructions.
When the Setup Complete screen appears, click Next.

At this point, setup of the printer and network is complete. Continue to follow any remaining on-screen instructions to finish and exit the setup program.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.