

PIXMA MX472
Mac OS

Network Requirements Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network.

Wireless Connection Before connecting the machine to the network, the computer needs to be connected to the network. Make sure that configuration of the computer and access point or router is complete.



Software Installation To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. Installation time varies depending on the computer environment or the number of application software to be installed.

If your PIXMA MX472 has already been set up on your wireless network, it is only necessary to install the software and drivers to the additional computer(s) on your wireless network. The network connection will be confirmed automatically It is not necessary to reset the printer or make additional settings. To set up your PIXMA MX472 to additional computer(s) on your wireless network, you must first download the software to your computer. Click here to download. After the file, mac-MX470-1_0-mcd.dmg , has downloaded successfully, double-click it to start the install procedure. Click Next on the first screen. If prompted, enter the Administrative Password and click Install Helper to continue.



Click Next on the initial screen


Continue following on-screen instructions. On the Software Installation List, select *software to install and click Next. *MP Drivers and Canon IJ Network Tool are required and cannot be deselected. We recommend installing IJ Scan Utility2 , My Image Garden and Quick Menu to take full advantage of the printer’s features.


Continue following the on-screen instructions. When the Add Printer screen appears, click Add Printer.


Select the Canon MX470 series with Canon IJ Network listed in the Kind column, then click Add.


Click Next on the Add Printer screen


Continue following on-screen instructions. When the Setup Complete screen appears, click Next.

At this point, setup of the printer and network is complete. Continue to follow any remaining on-screen instructions to finish and exit the setup program.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.