

Cableless setup
PIXMA MX472
Mac OS

Mac OS
Preparing to Connect My Multifunction to My Network 3 Network Requirements 3 Notes on Wireless Connection 4 Installing the Drivers & Software 5

Network Requirements Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network.

Wireless Connection Before connecting the machine to the network, the computer needs to be connected to the network. Make sure that configuration of the computer and access point or router is complete.



Software Installation To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. Installation time varies depending on the computer environment or the number of application software to be installed.

To begin setup of your PIXMA MX472 on your wireless network, you must first download the software to your computer. Click here to download. After the file, mac-MX470-1_0-mcd.dmg , has downloaded successfully, double-click it to start the install procedure. The setup instructions presented in this document describe the “Cableless Setup” method which does not require the need to know the SSID (network name), or network passphrase and does not require the printer to be temporarily connected to the computer with a USB cable. Click Next on the first screen. If prompted, enter the Administrative Password to continue.



Click Next on the initial screen


On the Connection Method Selection screen (1-1) select Wireless Connection.
Continue to follow on-screen instructions. Select Connect to the network when the Printer Setup (2-1) screen appears.



Continue to follow on-screen instructions. Press the Setup button on the printer then click Next on the Printer Setup (2-2) screen.
Carefully follow the instruction to select Wireless LAN setup on the printer. Press the printer’s OK button then click Next on the Printer Setup (2-3) screen.



Continue to follow the on-screen instructions until the Setup Procedure Selection screen (3-1) appears. If your printer’s LCD screen is the same as that shown above Push Button Method on the Setup Procedure Selection screen (3-1), press the printer’s Stop button. Once your printer’s screen is the same as that shown above Other Methods, click Other Methods on the Setup Procedure Selection screen (3-1).


Select Cableless setup on Setup Procedure Selection screen (3-2).
On the printer’s LCD, select Other setup, then press the OK button. Click Next on the Connection via Cableless setup (4-1) screen



Select Cableless setup on your printer and press the OK button. Click Next on the Connection via Cableless setup screen (4-2).
When the “Follow the instructions…” message appears on the printer’s LCD, click Next on the Connection via Cableless setup screen (4-3).



Continue following on-screen instructions. On the Software Installation List, select *software to install and click Next. *MP Drivers and Canon IJ Network Tool are required and cannot be deselected. We recommend installing IJ Scan Utility2 , My Image Garden and Quick Menu to take full advantage of the printer’s features.


Continue following the on-screen instructions. When the Add Printer screen appears, click Add Printer.


Select the Canon MX470 series with Canon IJ Network listed in the Kind column, then click Add.


Click Next on the Add Printer screen


Continue following on-screen instructions. When the Setup Complete screen appears, click Next.

At this point, setup of the printer and network is complete. Continue to follow any remaining on-screen instructions to finish and exit the setup program.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.