

PIXMA MX410
Mac OS

To navigate this guide, please use the arrows on the MAC keyboard or use the PAGE UP and Page DOWN keys.
LEFT
RIGHT
Page UP
UP
Page DOWN

Mac OS
Preparing to Connect My Multifunction to My Network 4 Network Requirements 4 Important Information You Need Before Adding Your Multifunction 5 Installing the Drivers & Software 6 Registering the Printer & Scanner 14

Network Requirements Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network.




An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without using an access point, is not supported.
Be sure to prepare an access point.

To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. The installation process takes about 20 minutes. (The installation time varies depending on the computer environment or the number of applications to be installed.)
Step One
Turn on the computer, then insert the Setup CDROM into the CD-ROM drive
Double-click the Setup icon of the CD-ROM folder to proceed to the following screen.
If the CD-ROM folder does not open automatically, double-click the CD-ROM icon on the desktop.


Step Four
Enter your administrator name and password. Click OK.
Click Easy Install. Click Install. The drivers, application software, and on-screen manuals are installed all together.


If you do not know your administrator name or password, click Help , then follow the on-screen instructions.

Step Six
Select Use the printer with wireless LAN connection, then click Next.
*Applications may vary by model
Follow any on-screen instructions to proceed with the software installation.


Click Install

Step Eight
Read the License Agreement screen carefully and click Yes.
When the Create an Alias on Desktop screen appears, select Agree if you want an alias of the On-Screen manual to be placed on the desktop , otherwise select Do not Agree, then click Next



Step Ten
Select Agree or Do not Agree on the Add Easy-WebPrint EX to the Dock screen, then click Next
Click Skip or Next on the Download Easy-webPrint screen



Step Twelve
When the Printer Detection screen appears, click Next
Make sure the machine is turned on, then click OK.



If the Detected Printers List screen appears, click Set Up New Printer.
When the Set Up New Printer screen appears, click Next.



Step Fifteen
When the Connect Cable screen appears, connect the machine to the computer with the Wireless LAN setup cable. Follow the on-screen instructions and click Next.
When the Confirm Connection Access Point screen appears click Next..


If a screen asking for permission to access the keychain appears, click Allow or Allow Once.

Step Sixteen When the Disconnect Cable screen appears, disconnect the
If the Detected Access Points List screen appears.
network setup cable. Click Next.



When the Setup Completion screen appears, click Complete or OK.


This section describes how to register the machine on a Macintosh computer.
When the Register Printer and Scanner screen appears, click Register Printer.

Proceed to the section that relates to your operating system for further installation instructions
Mac OS X v. 10.5.x / 10.6.x: Go to Step 2-A

Step Two 2-A 1. Select Canon MXxxx series in the list of printers, then click Add . *xxx refers to the model number. MX410 series shown in example, below
Step Two 2-B (OS X v. 10.4.11) 1. When the Printer List window appears, click Add.


*The alphanumeric characters after Canon xxxx series is the machine's Bonjour service name or MAC address

Step Two 2-B 2. Click More Printers in the Printer Browser window.
Step Two 2-B 3. Select Canon IJ Network in the pop-up menu, select Canon MXxxx series in the list of printers, then click Add . *xxx refers to the model number. MX410 series shown in example, below



Step Two 2-B 4. Make sure that the Canon MXxxx series is added to the list of printers.
When the Register Printer and Scanner screen appears, click Register Scanner.


*xxx refers to the model number. MX410 series shown in above example.

Step Five
Select Canon MX410 series on the Canon IJ Network Scanner Selector EX screen, then click OK
Click Next on the Register Printer and Scanner screen.


Step Seven
Click Next on the Print Head Alignment Recommended screen.
Click Next on the Register Printer and Scanner screen.



If the User Registration screen appears, read the information and click Next or Cancel.
If the Extended Survey Program screen appears: If you can agree to Extended Survey Program, click Agree. If you click Do not agree, the Extended Survey Program will not be installed. (This has no effect on the machine's functionality.).



Click Exit. Setup is complete

*It is necessary to restart the computer before scanning using the Operation Panel on the machine for the first time.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.