

PIXMA MX350 / PIXMA MX870
Mac OS

To navigate this guide, please use the arrows on the MAC keyboard or use the PAGE UP and Page DOWN keys.
LEFT
RIGHT
Page UP
UP
Page DOWN

Mac OS
Preparing to Connect My Multifunction to My Network 4 Network Requirements 4 Important Information You Need Before Adding Your Multifunction 5 Adding Your Multifunction to the Network 6 Confirm Connection Status 10 Installing the Drivers & Software 12 Registering the Printer & Scanner 17

Network Requirements Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network.




An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without using an access point, is not supported.
Be sure to prepare an access point.

Adding Your Multifunction to Your Network
Step Two
Press the Setup button (A)
Select Wireless LAN setup, and then press the OK button.



Step Four
Select Yes, then press the OK button.
Select Easy setup, and then press the OK button.
When wireless connection is enabled, the Wi-Fi lamp (D) lights blue.




Step Six
Select the access point name, then press the OK button.
When one of the following screens is displayed, enter the network key using the Numeric buttons (E), then press the OK button. If the following screen is not displayed, go to step 8


Press the button to switch character entry modes. Enter upper and lower case letters of the alphabet correctly

Step Eight
Make sure that the network key is correct, and then press the OK button.
When the connected to the access point screen appears, press the OK button.


The Setup menu screen returns.

Confirm Connection Status
Step Two
On the Setup menu, select Device Settings , and then press the OK button.
Select LAN settings, and then press the OK button.


Step Four
Select Confirm LAN settings, then press the OK button.
Select WLAN setting list, then press the OK button.
Make sure that Connection is set to Active, and then press the Copy button to return to standby.

It may take a while before the connection is complete. In this case, press the Back* button and wait for about a minute, then display the Wireless LAN setting list screen again.
*Back button location varies depending on model.

Installing the Drivers & Software
To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. The installation process takes about 20 minutes. (The installation time varies depending on the computer environment or the number of applications to be installed.)
Step One
Turn on the computer, then insert the Setup CDROM into the CD-ROM drive
Double-click the Setup icon of the CD-ROM folder to proceed to the following screen.
If the CD-ROM folder does not open automatically, double-click the CD-ROM icon on the desktop.


Step Four
Enter your administrator name and password. Click OK.
Click Easy Install. Click Install. The drivers, application software, and on-screen manuals are installed all together.


If you do not know your administrator name or password, click Help , then follow the on-screen instructions.

Step Six
Select Use the printer on network, then click Next.
*Applications may vary by model
Follow any on-screen instructions to proceed with the software installation.


Click Install

Step Eight
Read the License Agreement screen carefully and click Yes.
When the Printer Detection screen appears, click Next



On the Canon IJ Network Tool screen, choose your model and click Next.


This section describes how to register the machine on a Macintosh computer.
When the Register Printer and Scanner screen appears, click Register Printer.

Proceed to the section that relates to your operating system for further installation instructions
Mac OS X v. 10.5.x / 10.6.x: Go to Step 2-A

Step Two 2-A 1. Select Canon IJ Network in the pop-up menu, select Canon MXxxx series in the list of printers, then click Add . *xxx refers to the model number. MX340 series shown in example, below
Step Two 2-B 1. When the Printer List window appears, click Add.


*The alphanumeric characters after Canon xxxx series is the machine's Bonjour service name or MAC address

Step Two 2-B 2. Click More Printers in the Printer Browser window.
Step Two 2-B 3. Select Canon IJ Network in the pop-up menu, select Canon MXxxx series in the list of printers, then click Add . *xxx refers to the model number. MX340 series shown in example, below



Step Two 2-B 4. Make sure that the Canon MXxxx series is added to the list of printers.
When the Register Printer and Scanner screen appears, click Register Scanner.


*xxx refers to the model number. MX340 series shown in above example.

Step Five
Select Canon MXxxx series on the Scan-from-PC Settings screen, then click OK.. *xxx refers to the model number.
Click Next on the Register Printer and Scanner screen.


Step Seven
Click Next on the Print Head Alignment Recommended screen.
Click Next on the Register Printer and Scanner screen.



If the User Registration screen appears, read the information and click Next or Cancel.
If the Extended Survey Program screen appears: If you can agree to Extended Survey Program, click Agree. If you click Do not agree, the Extended Survey Program will not be installed. (This has no effect on the machine's functionality.).



Click Exit. Setup is complete

*It is necessary to restart the computer before scanning using the Operation Panel on the machine for the first time.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.