
How to Use This Manual




Advanced Guide
Troubleshooting
Describes the summary of
Describes the detailed function of this product.
this product.
Printing This Manual




Contents > Safety Precautions
Please read the safety warnings and cautions provided in this manual to ensure that you use the machine safely. Do not attempt to use the machine in any way not described in this manual. It causes unexpected accident, fire, or electric shock.
This product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities,
please move away from this product and consult your doctor.
The following are instructions that, if ignored, could result in death or serious personal injury
caused by incorrect operation of the equipment. These must be observed for safe operation.




Advanced Guide · Troubleshooting

The following are instructions that, if ignored, could result in personal injury or material damage
caused by incorrect operation of the equipment. These must be observed for safe operation.






Place the machine at least 5.91 inches / 15 cm away from other electrical appliances such as fluorescent lamps. If the machine is placed closer to those, it may not be able to work properly due to fluorescent noises.
When you disconnect the power plug
When you disconnect the power plug, always press the ON button and be sure that the light of the ON button (in green) goes out. If you disconnect the power plug from the power outlet when the ON button is lit or flashing, the Print Head cannot be protected and you may not be able to print later.

Contents > Overview of the Machine
This section shows the component names of the machine and describes the basic operations you need to know before using it.
Front View Rear View Inside View Operation Panel
Basic Operation in Each Mode Selecting Mode Selecting Menu Item from Specified Mode Basic Operation on the Setting Options
Advanced Guide · Troubleshooting

Contents > Overview of the Machine > Main Components

(1) ADF (Auto Document Feeder)
Load a document to copy, scan, or fax. The document loaded in the Document Tray are scanned automatically one sheet at a time.
See Loading a Document in the ADF.
(2) Document Feeder Cover
Open when clearing jammed documents.
Adjust these guides to match the width of document in the ADF.
Supports paper loaded in the Rear Tray. Open it to load paper.
Load various sizes or types of paper which you can use on the machine. Two or more sheets of the same size and type of paper can be loaded at the same time, and fed automatically one sheet at a time.
See Loading Paper.
Slide to align with both sides of the paper stack.
Open to load an original on the Platen Glass.
Open to load a document in the ADF. You can load two or more sheets of document of the same size and thickness. Load the document with the side you want to scan facing up.
(9) Document Output Slot
Documents scanned from the Document Tray are delivered here.
(10) Paper Output Tray
Opens automatically when printing or copying starts and printed papers are ejected.

Use to change the settings of the machine or to operate it.
See Operation Panel.

(12) Scanning Unit Detection Button
Locks the Scanning Unit (Cover) while the Document Cover is open. This button is pressed down when the Document Cover is closed, so that you can open the Scanning Unit (Cover). (You do not need to touch this button.)
For information on the Scanning Unit (Cover), see Scanning Unit (Cover).
(13) Direct Print Port
Connect a PictBridge compliant device such as a digital camera or the optional Bluetooth Unit BU-30* to print directly.
See Printing Photos Directly from Your Digital Camera or Mobile Phone.
You can also insert a USB flash drive to this port to save scanned data on it.
Refer to the on-screen manual: Advanced Guide.
* The Bluetooth Unit is not available in some countries or regions depending on the local laws and regulations. For details, contact your service center.
Do not connect any equipment other than PictBridge compliant devices, the optional
Bluetooth Unit BU-30, and USB flash drives to the Direct Print Port of the machine. This may cause fire, electric shock, or damage to the machine.
Do not touch the metal casing.
Load an original to copy, scan, or fax.

(15) External Device Jack
Connects an external device such as telephone, answering machine, or modem.
(11) Operation Panel · (14) Platen Glass

Do not touch the metal casing.
Remove the Telephone connector cap to connect the external device.
(16) Telephone Line Jack
Connects with the telephone line.
To avoid an electric shock, do not touch the metallic casing.
Plug in the USB cable to connect the machine with a computer.
Do not touch the metal casing.
Do not plug in or unplug the USB cable while the machine is printing from or scanning
originals to the computer.
(18) Power Cord Connector
Plug in the supplied power cord.

(19) Ink Cartridge Locking Covers
Locks the FINE Cartridges into place.
(20) Scanning Unit (Cover)
Scans an original. Open it to replace FINE Cartridges or to remove jammed paper inside the machine. To open the Scanning Unit (Cover), lift it with the Document Cover closed.
(21) Scanning Unit Support
Holds the Scanning Unit (Cover) being opened.
(22) FINE Cartridge Holder
Install the FINE Cartridges.
The Color FINE Cartridge should be installed into the left slot and the Black FINE Cartridge should be installed into the right slot.
(23) FINE Cartridges (Ink Cartridges)
A replaceable cartridge that is integrated with Print Head and ink tank.
For details on installing the FINE Cartridges, refer to the printed manual: Getting Started.
(17) USB Port

The area (A) indicated in the figure below may be splattered with ink. It does not affect the
performance of the machine.
Do not touch the area (A). The machine may not print properly if you touch it.


(1) ON button (Power lamp)
Turns the power on or off. Lights or flashes green to indicate the power status. Before turning on the power, make sure that the Document Cover is closed.
Disconnecting the power plug
When disconnecting the power plug after turning off the power, be sure to confirm that
the ON button is not lit. If the power plug is disconnected from the wall outlet while the ON button is lit or flashing, the machine may become unable to print properly since the Print Head is not protected.
If the power plug is disconnected, the date/time settings as well as all documents stored in
memory will be lost. Send an unsent fax or print a necessary document when the power plug is disconnected.
The machine cannot receive faxes when the power is turned off.
The power cannot be turned off while the machine is sending or receiving a fax, or when
there are unsent faxes in the machine's memory.
Switches the machine to copy mode.
Switches the machine to fax mode.
Switches the machine to scan mode.
Displays the menu items.

Changes the page size, media type, and print quality settings in each mode.
(7) LCD (Liquid Crystal Display)
Displays messages, menu selections, and the operational status.
The LCD will turn off if the machine is not operated for about 5 minutes. To restore the
display, press any button except the ON button or perform the print operation. The display will be also restored when receiving faxes.
Used to enter numerical values such as the number of copies, as well as fax/telephone numbers and characters.
Used to select and redial a number recently dialed using the Numeric buttons.
Also to enter pause time between or after numbers when dialing or registering numbers for example International calls.
(10) Coded Dial button
Displays the search telephone number screen. Enter the first letter of a pre-registered name to search a pre-registered fax/telephone number or group, and use the
(+) button to select a desired destination.
button to switch to the coded speed dial screen. Enter a two-digit code to select a desired destination. You can also use the
(+) button to select a desired destination.
Starts to make black & white print, copy, scan, fax, etc.
Cancels operation when print, transmission, or scan job is in progress.
Starts to make color print, copy, scan, fax, etc.
(14) FAX Quality button
Selects the scan resolution and contrast of the fax you are sending.
In the fax mode, switches to tone dialing temporarily or used to dial with the Numeric buttons, and also changes the input mode when entering characters.
Selects a menu or setting item. See How to Navigate Menus on the LCD .
Resolves an error when printing is in progress or resumes the machine's normal operation after removing jammed paper or to eject documents remaining in the ADF.
(+) buttons Scrolls through menu selections and increases/decreases setting values, such as the number of copies. Also, the
(+) button enters a space between characters when entering characters.
(-) button cancels the entered character, and the
Cancels operations and returns the LCD to the previous screen.
Lights or flashes orange when an error, such as paper-out or ink-out, occurs.
(20) In Use/Memory lamp
Flashes when sending or receiving faxes, and lights when there are documents saved in the machine's memory.
The machine makes the beep sound when pressing buttons on the Operation Panel.
To change the beep volume, see Machine Settings.


Contents > Overview of the Machine > How to Navigate Menus on the LCD
You can use the machine to make copies, send/receive faxes, or scan originals without a computer.You can also make good use of the various functions of the machine with the menu items and the setting options on the LCD. This section describes the basic operation to use the menu items and the setting options in each mode.
Basic Operation in Each Mode
Selecting Menu Item from Specified Mode
Basic Operation on the Setting Options
Press the mode button (A) to switch the screen to the desired mode first. Then, use the Menu button (B) to select available functions in each mode. To change the page size, media type, or print quality, press the Settings button (C).

Press the Menu button repeatedly until the desired menu item appears.Use the
(+) button to select the item, and press the OK button to set it.
You can return the LCD to the previous screen by pressing the Back button.
For details on each item, see Selecting Menu Item from Specified Mode.
To select Maintenance or Device settings, press the Menu button repeatedly until the desired menu
item appears in any mode.
Press the Stop button while menu items or setting options are displayed to return to the standby
screen for the current mode.
Press the appropriate mode button to switch to the desired mode.This section describes the menu items displayed in each mode.
Switch to the copy mode.
The options such as Frame erase or 2-on-1 copy can be specified from the Special copy menu.
The settings in Fax settings, Device settings, Maintenance, and Template print options can also be specified.
Switch to the fax mode.
Printing report/list, printing faxes saved on the memory, registering numbers, selecting a receive mode are available from the Fax settings menu.
The Device settings, Maintenance, and Template print options can also be specified.
Switch to the scan mode.
The place to save the scanned data can be specified from the Save to menu.
The Device settings, Maintenance, and Template print options can also be specified.
Refer to the following list of the menu items to select the function from the specified mode.


See Using Various Copy Functions.
See Using Various Copy Functions.
See Using Various Copy Functions.
See Using Various Copy Functions.
See Using Various Copy Functions.
See Using Various Copy Functions.
See Using Various Copy Functions.
See Fax settings in "Fax mode".
See Device settings in "Maintenance/setting".
See Maintenance in "Maintenance/setting".
See Printing the Notebook or Graph Paper.


Receive mode set.
See Setting the Receive Mode.
See Memory reference.
See Print reports/lists.
TEL no. registration
See TEL no. registration.
See Other Basic Setting Items.
See Settings for Sending Faxes.
See Settings for Receiving Faxes.
See Device settings in "Maintenance/setting".
See Maintenance in "Maintenance/setting".
See Printing the Notebook or Graph Paper.

See Saving Scanned Data.
See Device settings in "Maintenance/setting".
See Maintenance in "Maintenance/setting".

See Printing the Notebook or Graph Paper.
See Print settings.
Advanced settings See Advanced settings.
Mobile phone settings*1
See Mobile phone settings.
See Bluetooth settings.
See PictBridge settings.
See Reset setting.
*1 Appears only when the optional Bluetooth unit is attached to the machine.
See Printing the Nozzle Check Pattern.
See Cleaning the Print Head.
See Cleaning the Print Head Deeply.
See Aligning the Print Head.
Print head align value
See Aligning the Print Head.
See Cleaning the Paper Feed Roller.

*2 For details on the Bottom cleaning, refer to the on-screen manual: Advanced Guide.
You can change the settings in each mode by pressing the Settings button, when printing in the copy mode or fax mode or when saving scanned data on a USB flash drive in the scan mode. You can change the print settings such as page size, media type, etc. This section describes the procedure to change the settings, taking the procedure to specify 4"x6"(10x15cm) for the page size in the copy mode as an example. When printing from a computer, see Printing from Your Computer.
To change the settings when printing from a PictBridge compliant device or wireless communication
device, refer to the on-screen manual: Advanced Guide.
(1) Press the COPY button to switch to the copy mode.
(2) Press the Settings button repeatedly until Page size appears.

(+) button to select the page size. Example: Select 4"x6"(10x15cm) here.

(2) Press the OK button.
To change setting other than Page size, press the Settings button repeatedly until the desired
option appears. For details on the setting options specified by the Settings button
For the settings in the copy mode, see Changing the Settings.
For the settings in the fax mode, see Preparing for Receiving a Fax .
You can also change the image quality or density of sending faxes with the FAX Quality button.For details, see Sending a Fax with the Numeric Buttons .
Bottom cleaning*2 · (1) Use the · (-) or

Contents > Setting Up the Machine
This section describes typical examples of connecting and setting up the machine before using the faxing functions.
Connecting Various Lines Setting the Telephone Line Type
Registering Sender Information Guidelines for Entering Numbers, Letters, and Symbols Entering the Date and Time Setting Daylight Saving Time (Summer Time) Registering Your Fax/Telephone Number and Name Other Basic Setting Items
Selecting a Receive Mode
Advanced Guide · Troubleshooting

Contents > Setting Up the Machine > Confirming the Telephone Line Connection
For the basic connection of the machine, refer to the printed manual: Getting Started. This guide describes other typical connection. The machine cannot send/receive faxes if the connection is incorrect. Connect the machine correctly.
Setting the Telephone Line Type
If the Power Disconnects Unexpectedly If there is a power failure or if you accidentally disconnect the power plug, the date/time settings as well as all documents stored in memory will be lost. The settings of user data, coded speed dial, group dial, and rejected numbers are retained. If the power disconnects, the following will apply:
You will not be able to send or receive faxes, make copies, or scan originals.
When you are connecting the telephone or answering machine, whether or not you can use it
depends upon your telephone line, telephone, or answering machine.
These are examples and could not be guaranteed to suit every connecting condition. For details, refer to the instruction manual supplied with the network device (control devices such as an xDSL (Digital Subscriber Line) modem or terminal adapter) you are connecting to this machine.
xDSL is the generic term for the high speed digital communication technology with telephone line
such as ADSL/HDSL/SDSL/VDSL.

(A) Computer (B) Telephone or answering machine (C) Analog line
Before connecting a telephone or answering machine, remove the Telephone connector cap.
If the connector of the external device cannot be connected to the jack on the machine, you will need to purchase a B.T. adapter to connect as follows: Attach the B.T. adapter to the modular cable connecting the external device, then connect the B.T.
(External device) jack.

Connecting to an xDSL

(A)Telephone or answering machine
Before connecting a telephone or answering machine, remove the Telephone connector cap.
(B) Splitter (C) Digital Subscriber Line (D) Computer (E) xDSL modem (splitter may be built-in to the modem)
Do not branch the telephone line before the splitter (wall side). And also, do not connect
splitters in parallel. The machine may not be able to operate properly.
When connecting to the xDSL line, select the same line type as you are subscribing in
Telephone line type.
For details on ISDN (Integrated Service Digital Network) connection and settings, refer to the manuals supplied with your terminal adapter or dial-up router.
Before using your machine, make sure you set the correct telephone line type for your telephone line. If you are unsure of your telephone line type, contact your telephone company. For xDSL or ISDN connections, contact the telephone company or service provider to confirm your line type.
Rotary pulse is not supported depending on the selected country in Country select displayed when
you start the machine for the first time after purchase. The Telephone line type menu will not appear in such country.
You can print the User's data list to check the current setting.
For details, refer to the on-screen manual: Advanced Guide.
(1) Press the FAX button, and press the Menu button.
The Fax settings menu will appear.


(+) button to select User settings, and press the OK button. The User settings menu will appear.

(+) button to select Telephone line type, and press the OK button.
(+) button to select the telephone line type.

Rotary pulse: Suitable for pulse dialing.
Touch tone: Suitable for tone dialing.
(2) Press the OK button.
(1) Press the FAX button.

Contents > Setting Up the Machine > Specifying the Basic Settings for the Machine
This section describes the basic settings for the machine such as how to register the sender information, to enter numbers and letters, to set daylight saving time, etc.
Guidelines for Entering Numbers, Letters, and Symbols
Entering the Date and Time
Setting Daylight Saving Time (Summer Time)
Registering Your Fax/Telephone Number and Name
Other Basic Setting Items
Advanced Guide · Troubleshooting · Registering Sender Information

Contents > Setting Up the Machine > Specifying the Basic Settings for the Machine > Registering Sender Information
A fax you receive may have information, such as the sender's name or the company name, the sender's phone or fax number, and the date and time of the transmission, printed in small type at the top of each page. Such sender information is called Transmit Terminal Identification, or TTI. You can register the TTI in this machine, so that the recipient of the fax will know who sent it, and when it was sent. Below is an example of how your sender information would print on a fax sent from your machine:

(A) Date and time of transmission (B) Sender's fax/telephone number (C) Sender's name (D) Displays the recipient's name when sending from coded speed dial. (E) Page number
For the sender information
For the sender information, the settings other than the descriptions in this guide are listed below.
For details, refer to the on-screen manual: Advanced Guide. - When sending a fax in black & white, you can set the sender information to print inside or outside
the image area. - For color sending, the sender information is printed inside the print area and the recipient's name
is not printed. - You can select FAX or TEL to be displayed in front of the number. - Three date display formats are available. - You can print the User's data list to confirm the sender information you have registered.
Advanced Guide · Troubleshooting

Contents > Setting Up the Machine > Specifying the Basic Settings for the Machine > Guidelines for Entering Numbers, Letters, and Symbols
The following characters are assigned to the Numeric buttons.
Button Uppercase letter mode Lowercase letter mode Number mode
GH I Ï Í Ì Î gh i ï í ì î 4
#!",;:^`_=/|'?$@%&+()[]{}
button to switch to uppercase letter mode (:A), lowercase letter mode (:a), or number mode (:1).
* SP indicates a space. Follow the procedure below to enter letters and numbers when you register names and fax/phone numbers for the sender information or a speed dial.
button to switch to uppercase letter mode (:A), lowercase letter mode (:a), or number mode (:1). You can see what mode you are in by the character displayed in the upper right corner of the LCD.

Here describes the unit name registration. To display the Unit name registr.
screen, see Registering Your Fax/Telephone Number and Name .
Press the button repeatedly until the character you want to enter appears.

To enter a character that is assigned to the same button as the
(+) button, and press the same Numeric button.
button three times.

(+) button, and press the
button again.

(+) button twice. In number mode, press the
(+) button once.
(-) button.
Press and hold the
(-) button.

Contents > Setting Up the Machine > Specifying the Basic Settings for the Machine > Entering the Date and Time
Three date display formats are available: YYYY/MM/DD, MM/DD/YYYY, and DD/MM/YYYY.
For details, refer to the on-screen manual: Advanced Guide.
When the machine is connected to a computer with the MP Drivers installed, the date and time
setting will be copied from the computer to the machine. As long as the date and time is set accurately on your computer, you do not need to set it on the machine.
If you disconnect the power plug or when there is a power failure, the date and time setting on the
machine will be reset. When you connect the machine to a computer with the MP Drivers installed, the setting will be copied to the machine once again.
(1) Press the FAX button, and press the Menu button.
The Fax settings menu will appear.
(+) button to select User settings, and press the OK button. The User settings menu will appear.
(+) button to select Date/time setting, and press the OK button.
(1) Use the Numeric buttons to enter the date and time (in 24-hour format).
Enter only the last two digits of the year.

If you misentered the date and time, press the
(+) button to move the cursor under the number to enter the correct number.
(2) Press the OK button.
(1) Press the FAX button.

Contents > Setting Up the Machine > Specifying the Basic Settings for the Machine > Setting Daylight Saving Time (Summer Time)
Some countries adopt the daylight saving time (summer time) system that shifts the clock time forward at certain periods of the year. You can set your machine to automatically change the time by registering the day and time that daylight saving (summer time) begins and ends.
Not all the latest information of all countries or regions are applied for Summer time setting by
default. You need to change the default setting according to the latest information of your country or region.
This setting may not be available depending on the country or region of purchase.
(1) Press the FAX button, and press the Menu button.
The Fax settings menu will appear.
(+) button to select User settings, and press the OK button. The User settings menu will appear.
(+) button to select Summer time setting, and press the OK button.
(+) button to select ON to enable summer time.

To disable summer time, select OFF.
(2) Press the OK button.
(+) button to select Start date/time, and press the OK button.

(2) Make sure that Set month is selected, and press the OK button.
(+) button to select the month when summer time starts, and press the OK button.


(4) Make sure that Set week is selected, and press the OK button.
(+) button to select the week when summer time starts, and press the OK button.

(6) Make sure that Set day of week is selected, and press the OK button.
(+) button to select the day of the week when summer time starts, and press the OK button.

(8) Make sure that Set shift time is selected, and press the OK button.
(9) Use the Numeric buttons to enter the time (in 24-hour format) when summer
time starts. Precede single digits with a zero.

(10) Press the OK button.
The summer time start date/time will be set.
(1) Make sure that End date/time is selected, and press the OK button.

(2) Make sure that Set month is selected, and press the OK button.
(+) button to select the month when summer time ends, and press the OK button.

(4) Make sure that Set week is selected, and press the OK button.
(+) button to select the week when summer time ends, and press the OK button.
(6) Make sure that Set day of week is selected, and press the OK button.
(+) button to select the day of the week when summer time ends, and press the OK button.
(8) Make sure that Set shift time is selected, and press the OK button.
(9) Use the Numeric buttons to enter the time (in 24-hour format) when summer
time ends.

Precede single digits with a zero.
(10) Press the OK button.
The summer time end date/time will be set.
(1) Press the FAX button.

Contents > Setting Up the Machine > Specifying the Basic Settings for the Machine > Registering Your Fax/Telephone Number and Name
Before sending a fax, be sure to enter your fax/telephone number in the Unit TEL no. registr.
screen. (for US only)
(1) Press the FAX button, and press the Menu button.
The Fax settings menu will appear.
(+) button to select User settings, and press the OK button. The User settings menu will appear.
(+) button to select Unit TEL no. registr., and press the OK button.
(1) Use the Numeric buttons to enter your fax/telephone number (max. 20 digits,
including spaces). To enter a plus sign (+) before the number, press the
button.

For details on how to enter or delete numbers, see Guidelines for Entering Numbers,
Letters, and Symbols.
(2) Press the OK button.
(1) Make sure that Unit name registr. is selected, and press the OK button.
(2) Use the Numeric buttons to enter your name (max. 24 characters, including
spaces).

For details on how to enter or delete characters, see Guidelines for Entering Numbers,
Letters, and Symbols.

(3) Press the OK button.
(1) Press the FAX button.

Contents > Setting Up the Machine > Specifying the Basic Settings for the Machine > Other Basic Setting Items
You can select the following items in User settings of Fax settings. For details, refer to the on-screen manual: Advanced Guide.
Prints received faxes automatically when the machine received it. When OFF is selected, received faxes will be stored in the memory and also TX/RX reports, MULTI TX (Transmission) report, and Activity report are not printed automatically.
Sets the format of dates displayed on the LCD and printed on sent faxes. Three date formats are available; YYYY/MM/DD, MM/DD/YYYY, and DD/MM/YYYY.
Selects the position to print the sender information (outside or inside the image area). After selecting the print position, select FAX to print "FAX" or TEL to print "TEL" before your fax/ telephone number.
Sets whether to set off an alarm when the handset is off hook.
Adjusts the ringing volume or line monitor volume during the transmission.
Selects the level of the ringing sound the machine makes when it receives a fax.
Prints the history of sent and received faxes. The machine is set to print an Activity report after every 20 transactions by default. You can also print it manually.
Advanced Guide · Troubleshooting

Contents > Setting Up the Machine > Setting the Receive Mode
Selecting a Receive Mode
There are four receive modes as follows. Select a receive mode according to your needs.
You receive mainly faxes and sometimes voice calls:
Select Fax priority mode.
You have a dedicated telephone line for fax use only:
Select Fax only mode.
You receive mainly voice calls and sometimes faxes:
Select TEL priority mode.
You have subscribed to a ring pattern detection service provided by your
telephone company:
Select DRPD*1 or Network switch*2.
*1 This setting is only available in US and Canada.
*2 This setting may not be available depending on the country or region of purchase.
The receiving operation procedure varies depending on the selected receive mode. For the
receiving method depending on each receive mode, see Receiving Faxes.
If you want to use a single telephone line for faxes and voice calls, you need to connect a
telephone or an answering machine to the External Device Jack of this machine.
(1) Press the FAX button, and press the Menu button.
(+) button to select Receive mode set., and press the OK button.
(+) button to select a receive mode, and press the OK button.

The screen returns to the fax standby screen. The selected receive mode will appear on the LCD.
You want to receive faxes automatically (Fax priority mode).


(A) Incoming call (B) Voice call:
The machine will ring. Pick up the handset, and press the Stop button to answer the call. (C) Fax:
The machine receives faxes automatically.
If a telephone is connected to the machine, the telephone will ring when the call incomes
regardless of the receive mode.
You want to receive only faxes automatically (Fax only mode).

(A) Incoming call (B) Receives faxes automatically.
You want to receive faxes manually (TEL priority mode).

(A) Incoming call (B) Voice call:
The telephone will ring. Pick up the handset to answer the call. (C) Fax:
The telephone will ring. If you pick up the handset and hear the fax tone, the machine will switch to the fax automatically and receive the fax.

If the machine will not switch to the fax, press the Color or Black button to receive the fax.
(D) When the answering machine responds:
Voice call: The answering machine responds to the call. Fax: The machine receives the fax automatically.
Provided by Your Telephone Company:
The machine automatically receives a fax and voice call respectively with a different ring pattern.
You have subscribed to the Distinctive Ring Pattern Detection (DRPD) service
(US and Canada only) (DRPD).

(A) Incoming call:
The machine judges whether call is voice or fax by the ringing pattern. In the meanwhile the telephone rings. (B) Voice call:
The telephone continues to ring. Pick up the handset to answer the call. (C) Fax:
The fax is received automatically when the machine detects the registered fax ring pattern.
You want the machine to automatically switch between fax and voice calls by the
call ring patterns (Network Switch). (Select Network switch)
* This setting may not be available depending on the country or region of purchase.

(A) Incoming call:
The machine judges whether call is voice or fax by the ringing pattern. In the meanwhile the telephone rings. (B) Voice call:
The telephone continues to ring. Pick up the handset to answer the call. (C) Fax:
The fax is received automatically when the machine detects the fax ring pattern.
If you have subscribed to a Distinctive Ring Pattern Detection (DRPD) service provided by your telephone company, your telephone company will assign two or more telephone numbers with distinctive ring patterns to your single telephone line, allowing you to have different numbers for fax calls and voice calls using only one telephone line. Your machine will automatically monitor the ring pattern, and will automatically receive the fax if the ring pattern is a fax call. To use DRPD, follow the procedure below to set the fax ring pattern that matches the pattern assigned by your telephone company.
Contact your local telephone company for detailed information on this service.

(1) Press the FAX button, and press the Menu button.
(+) button to select Reception settings, and press the OK button.
(+) button to select DRPD: Fax ring pat., and press the OK button.
(+) button to select the ring pattern that your telephone company assigned to your fax number. Select from Normal ring, Double ring, Short-short-long, Short-long-short, or Other ring type.

(2) Press the OK button.
(1) Press the FAX button.

Copying
You can copy in the various methods such as enlarging/reducing or copying two original pages onto a single sheet of paper.
Using Various Copy Functions

Contents > Copying > Making Copies
This section describes the basic operation, using the settings to copy an original of A4 size on plain paper as an example. For the operation, see the notes and operation procedure described in the reference page.

Originals to copy. See Originals You Can Load .

Paper for printing. See Media Types You Can Use.

(1) Make sure that the power is turned on.
See Operation Panel.
(2) Press the Copy button to select the copy mode, if another copy mode has been
selected. The copy standby screen will appear.
(3) Load paper.
See Loading Plain Paper/Photo Paper.
Here we make sure that A4 plain papers are loaded in the Rear Tray.
(4) Open the Paper Output Tray gently.
Advanced Guide · Troubleshooting


(5) Load an original on the Platen Glass or in the ADF.
Load the original with the copying side FACING DOWN and align it with the alignment mark
as shown below.
For details on the type and condition of an original which you can copy and how to load
the original in the ADF, see Loading a Document in the ADF.

(+) button or the Numeric buttons to specify the number of copies (D).
(2) Confirm the page size, media type, and other settings.
Here we confirm that 100% for Enlarge/Reduce (A), A4 for Page size (B), Plain paper for Media type (E), and Std (Standard) for Image quality (C) are specified.
Press the Settings button repeatedly until the desired item appears and confirm or
change page size, media type, or other settings.
To make copies in various layout, press the Menu button, and use the
(+) button to select the functions. See Using Various Copy Functions .

(3) Press the Color button for color copying, or the Black button for black & white
copying. The machine starts copying.
Remove the original on the Platen Glass after copying is completed.
(1) Use the · (-) or · (-) or

Do not open the Document Cover or move the loaded original until copying is completed.
Press the Stop button to cancel copying.
The machine can receive faxes even in the copy mode (after pressing the COPY button).
You can use the Settings button to change the print settings such as page size, media type, or print quality to print. Press the Settings button to display the setting items in the following order. To change the setting, display the desired item and press the
(+) button to select the option, and then press the OK button. The LCD returns to the copy standby screen when the setting is complete.
Specify the enlargement/reduction manner. You can specify the copy scale by selecting the optional number or the page size: 86% A4
A4, etc. If you do not want to enlarge/reduce the page size, select 100%. For details, refer to the on-screen manual: Advanced Guide.
Select the page size of the paper to print: A4, B5, etc.
Select the media type of the paper to print: Plain paper, Plus Glossy II, etc.
If you do not select the media type correctly, the machine may not print with the proper
print quality.
Specify the intensity when you want to darkened/lightened a copy. You can also set the intensity to adjust it automatically according to the original. For details, refer to the on-screen manual: Advanced Guide.
Adjust the print quality according to the original to copy: High, Standard, or Fast. The available print quality settings depend on the paper selected in Media type.
The settings of the page size, media type, print quality, automatic intensity, etc. are retained,
and these settings will appear next time when the copy mode is selected even if the power is turned off and on.
Combination of some items cannot be specified depending on the function.
If you select Fast with the media type set to Plain paper and the quality is not as good as
expected, select Standard or High and then try copying again.

Contents > Copying > Using Various Copy Functions
You can make a copy in various ways when you select Special copy in the copy mode. For details, refer to the on-screen manual: Advanced Guide.


Frame erase Sticker copy


Borderless copy Image repeat



(A) Collated copy is not selected
(B) Collated copy is selected


Scanning
You can send scanned data to your computer, edit or process them with the supplied software application, then save them. You can also save scanned data on a USB flash drive inserted into the machine.
Preparing for scanning with the Operation Panel Saving Scanned Data on the Computer
Advanced Guide · Troubleshooting · Contents > Scanning

Contents > Scanning > Saving Scanned Data
This section describes the operation to detect the type of original on the Platen Glass or in the ADF automatically, and save it on a computer. For other operations to save scanned data on the USB flash drive or to scan originals with a computer, refer to the on-screen manual: Advanced Guide.
Please note that Canon shall not be liable for any damage or loss of the data for any reason
whatsoever, even within the warranty period of the machine.
Before scanning images, confirm the following:
installed?
If the software is not yet installed, refer to the printed manual: Getting Started.
to be set on the Platen Glass or in the ADF?
For details, see Originals You Can Load .
Confirm that the connection between the machine and the computer is physically secure.
Do not insert or remove USB cable when scanning images with the machine, or when the computer
is in sleep or standby mode.
You need to set MP Navigator EX as the starting application software in Image Capture under Applications of Mac OS X.
(1) Select Applications on the Go menu, then double-click the Image Capture icon.
(2) Click Options at lower left of the scanner window, select MP Navigator EX 2 in
Application to launch when scanner button is pressed, then click OK. To quit Image Capture, select Quit Image Capture on the Image Capture menu.
If Options is not displayed, do the following:
Select Preferences on the Image Capture menu, click Scanner, and click Use TWAIN software
whenever possible to clear the option. Then quit Image Capture and restart it.
(1) Make sure that the power is turned on.
See Operation Panel.
(2) Load an original on the Platen Glass or in the ADF.
For details, see Loading Originals.
Advanced Guide · Troubleshooting

(1) Press the SCAN button.
PC scan standby will appear.
If PC scan standby is not displayed, press the Menu button. Use
(+) to select PC, and press the OK button.
(2) Press the Color or Black button.
When originals are placed on the platen glass, only the page placed directly on the platen glass is saved on the computer.
When originals are loaded in the ADF and saved as a PDF file, multiple pages are saved on the computer as a single file.
If the position or size of an image is not scanned in correctly depending on the type of
original, refer to the on-screen manual: Advanced Guide and change the Document Type and Document Size settings in MP Navigator EX to match the original being scanned.
When using Windows Vista:
The program selection screen may be displayed after performing (2) in step 2. In this case,
select MP Navigator EX Ver2.1 and click OK. You can set MP Navigator EX to launch whenever performing (2) in step 2. For details, refer to the on-screen manual: Advanced Guide. When using Windows XP:
The program selection screen may be displayed after performing (2) in step 2 for the first time.
In this case, specify MP Navigator EX Ver2.1 as the application software to use, select Always use this program for this action, then click OK. From the next time, MP Navigator EX is automatically started.
(-) or

Contents > Printing from Your Computer
This section describes how to print documents or photos with a computer. You can easily print photos taken with your digital camera by using Easy-PhotoPrint EX supplied with your machine.
Using Various Functions of Easy-PhotoPrint EX
Printing Documents (Macintosh)
For Mac OS X v.10.5.x For Mac OS X v.10.4.x or Mac OS X v.10.3.9
Advanced Guide · Troubleshooting

Contents > Printing from Your Computer > Printing Photos (Easy-PhotoPrint EX)
Print image data saved on your computer with Easy-PhotoPrint EX supplied with your machine. This section describes the procedure, using print setting for borderless photo print on 4" x 6" / 10 x 15 cm paper as a sample. For details on Easy-PhotoPrint EX, refer to the on-screen manual: Advanced Guide.
The screens used in this section are for printing with Windows. The operations are also the same
for printing with Macintosh.
Install Easy-PhotoPrint EX from the Setup CD-ROM when it has not been installed or has been
uninstalled. To install Easy-PhotoPrint EX, select Easy-PhotoPrint EX in Custom Install.
(1) Make sure that the machine is turned on.
See Operation Panel.
(2) Load paper.
See Loading Plain Paper/Photo Paper.
Here we load 4" x 6" / 10 x 15 cm photo paper in the Rear Tray.
(3) Open the Paper Output Tray gently.

(1) Start Easy-PhotoPrint EX.
(Easy-PhotoPrint EX) on the desktop.
Select the Go menu, Applications, Canon Utilities, Easy-PhotoPrint EX, then double-click Easy- PhotoPrint EX.
To start Easy-PhotoPrint EX from Solution Menu, double-click
(Solution Menu) on the
(Print photos or albums, etc.). See To Start Solution Menu.

To start Easy-PhotoPrint EX from the Start menu, select All Programs (Programs in
Windows 2000), Canon Utilities, Easy-PhotoPrint EX, then Easy-PhotoPrint EX.
To start Easy-PhotoPrint EX from Solution Menu, click
(Solution Menu) in the Dock and
(Print photos or albums, etc.). See To Start Solution Menu.
(2) Click Photo Print.
You can select Album, Calendar, Stickers, etc., besides Photo Print.
See Using Various Functions of Easy-PhotoPrint EX .

(1) Select the folder in which images are saved.
(2) Click the image to print.
The number of copies appears as "1", and the image you selected appears in the selected image area (A). You can select two or more images at the same time.
To print two or more copies, click
(Up arrow) to change the number of copies.
To cancel the selection, click the image to cancel in the selected image area and click
(Delete Imported Image). You can also use
(Down arrow) to change the number of copies to zero.
You can also correct or enhance the selected image.
See Using Various Functions of Easy-PhotoPrint EX .
(3) Click Select Paper.

(1) Make sure that your machine's name is selected in Printer.
(2) Select the size and type of the paper to print in Paper Size and Media Type.
click

Here we select 4"x6" 10x15cm in Paper Size and the type of loaded photo paper in Media Type.
If you select the wrong media type, the machine may not print with the proper print quality.
(3) Click Layout/Print.

(1) Select the layout of photo.
Here we select Borderless [full].
The preview will appear in the selected layout for confirmation of the required print result.
You can change the direction of photo or crop a part of photo (trimming) to print.
For details on the operation, refer to the on-screen manual: Advanced Guide.
(2) Click Print.

To cancel a print job in progress, press the Stop button on the machine or click Cancel
Printing on the printer status monitor. To display the printer status monitor, click Canon XXX Printer (where " XXX" is your machine's name) on the taskbar.
Click the printer icon in the Dock to display the list of print jobs in progress.
To cancel a print job in progress, select the desired job in the Name list and click Delete.
To temporarily stop a job in progress, click Hold. To temporarily stop all the jobs in the list, click Pause Printer.

Contents > Printing from Your Computer > Printing Photos (Easy-PhotoPrint EX) > Using Various Functions of Easy- PhotoPrint EX
This section describes a few of the useful functions of Easy-PhotoPrint EX. For details on the operation, refer to the on-screen manual: Advanced Guide.
You can create an album or calendar using your photos.




You can use Red-Eye Correction, Face Sharpener, Digital Face Smoothing, Brightness, Contrast, etc. to adjust, correct, or enhance images automatically or manually.


Contents > Printing from Your Computer > Printing Documents (Windows)
This section describes the procedure to print A4 document on plain papers. For details, refer to the on-screen manual: Advanced Guide.
Operations may vary depending on your software application. For details on the operation, refer to
the instruction manual of your application.
If your machine is connected to a computer, you can send faxes using the fax driver from any
software application that has a printing function. For details, refer to the on-screen manual: Advanced Guide.
The screens used in this section are for printing with Windows Vista operating system Ultimate
Edition (hereafter referred to as "Windows Vista").
See Operation Panel.
See Loading Paper.
Here we make sure that A4 plain paper is loaded in the Rear Tray.
(1) Select Print on the File menu or the command bar in your software application.
The Print dialog box will appear.
(2) Make sure that your machine's name is selected.
If another printer's name is selected, click and select your machine's name.
(3) Click Preferences (or Properties).

Advanced Guide · Troubleshooting

(1) Select Business Document in Commonly Used Settings.
When the print object such as Business Document or Photo Printing is selected in
Commonly Used Settings, the items in Additional Features will be selected automatically. The settings suitable for the print object such as media type or print quality will also appear.
When you specify two or more copies in Copies, the Collate check box will be selected.
(2) Make sure of the displayed settings.
Here we make sure that Plain Paper in Media Type, Standard in Print Quality, and A4 in Printer Paper Size are selected.
The settings can be changed.
However, after changing Printer Paper Size, confirm that the setting for Page Size in the Page Setup sheet matches the setting set in the software application. For details, refer to the on-screen manual: Advanced Guide.
(3) Click OK.

For details on the printer driver functions, click Help or Instructions to view the online help or
the on-screen manual: Advanced Guide. The Instructions button appears on the Quick Setup, Main, and Maintenance sheets if the on-screen manual is installed on your computer.
You can name the changed setting and add to Commonly Used Settings. For details refer to the
on-screen manual: Advanced Guide.
To display the current settings next time when you open the printer driver setup window,
select the Always Print with Current Settings check box. Some software applications may not have this function.
To display the preview to confirm the print result, select the Preview before printing check
box. Some software applications may not have a preview function.
You can specify the detailed print settings with Main sheet or Page Setup sheet.
For details, refer to the on-screen manual: Advanced Guide.
Click Print (or OK) to start printing.


The message on how to load envelopes will appear when printing on them.
This message will not appear next time if you select the Do not show this message again. check box.
To cancel a print job in progress, press the Stop button on the machine or click Cancel Printing
on the printer status monitor. To display the printer status monitor, click Canon XXX Printer (where " XXX" is your machine's name) on the taskbar.
If printed ruled lines are misaligned or print results are unsatisfactory, adjust the print head
position. See Aligning the Print Head.

Contents > Printing from Your Computer > Printing Documents (Macintosh)
This section describes the procedure to print A4 document on plain papers. For details, refer to the on-screen manual: Advanced Guide.
Operations may vary depending on your software application. For details on the operation, refer to
the instruction manual of your application.
See Operation Panel.
See Loading Paper.
Here we make sure that A4 plain paper is loaded in the Rear Tray.
Select Print on the File menu in your software application.
The Print dialog box will appear.
(Down arrow).
If the dialog box below appears, click

(1) Make sure that your machine's name is selected in Printer.
(2) Select the page size of the loaded paper in Paper Size.
Here we select A4.
(3) Select Quality & Media in the pop-up menu.
Advanced Guide · Troubleshooting


(4) Select the media type of the loaded paper in Media Type.
Here we select Plain Paper.
If you select the wrong media type, the machine may not print with the proper print quality.
(5) Select the print quality in Print Quality.
Here we select Standard.
For details on the print quality, refer to the on-screen manual: Advanced Guide.

For details on the printer driver functions, click
(Question) on the Quality & Media, Color Options, Borderless Printing, or Margin screen to view the on-screen manual: Advanced Guide. If the on-screen manual is not installed, it will not appear even if
(Question) is clicked.
The preview appears on the left of the dialog box to confirm the print result. Some software
applications may not have a preview function.
Click Print to start printing.
Click the printer icon in the Dock to display the list of print jobs in progress.
To cancel a print job in progress, select the desired job in the Name list and click Delete. To
temporarily stop a job in progress, click Hold. To temporarily stop all the jobs in the list, click Pause Printer.
If printed ruled lines are misaligned or print results are unsatisfactory, adjust the print head
position. See Aligning the Print Head.

The screens used in this section are for printing with Mac OS X v.10.4.x.
See Operation Panel.
See Loading Plain Paper/Photo Paper.
Here we make sure that A4 plain paper is loaded in the Rear Tray.
(1) Select Page Setup on the File menu in your software application.
The Page Setup dialog box will appear.
(2) Make sure that your machine's name is selected in Format for.
(3) Select the page size of the loaded paper to print in Paper Size.
Here we select A4.
(4) Click OK.

(1) Select Print on the File menu in your software application.
The Print dialog box will appear.
(2) Make sure that your machine's name is selected in Printer.
(3) Select Quality & Media in the pop-up menu.
(4) Select the media type of the loaded paper to print in Media Type.
Here we select Plain Paper.
If you select the wrong media type, the machine may not print with the proper print quality.
(5) Select the print quality in Print Quality.
Here we select Standard.

For details on the print quality, refer to the on-screen manual: Advanced Guide.

For details on the printer driver functions, click
(Question) on the Quality & Media, Color Options, Special Effects, Borderless Printing, or Margin screen to view the on-screen manual: Advanced Guide. If the on-screen manual is not installed, it will not appear even if
(Question) is clicked.
To display the preview to confirm the print result, click Preview. Some software applications
may not have a preview function.
Click Print to start printing.
Click the printer icon in the Dock to display the list of print jobs in progress.
To cancel a print job in progress, select the desired job in the Name list and click Delete. To
temporarily stop a job in progress, click Hold. To temporarily stop all the jobs in the list, click Stop Jobs.
If printed ruled lines are misaligned or print results are unsatisfactory, adjust the print head
position. See Aligning the Print Head.

Faxing
This section describes the basic operation to send or receive faxes with the fax functions of the machine.
Sending a Fax with the Numeric Buttons Redialing the Number Dialed with the Numeric Buttons Adjusting the Sending Quality
Settings for Sending Faxes
Preparing for Receiving a Fax Receiving a Fax in Each Receive Mode Receiving a Fax in the Memory of the Machine (Memory Receiving)
Settings for Receiving Faxes
Advanced Guide · Troubleshooting · Contents > Faxing

Contents > Faxing > Sending Faxes
This section describes dialing and sending faxes directly using the Numeric buttons. For details on other ways to send faxes, see Using Various Sending Functions .
Sending a Fax with the Numeric Buttons
Redialing the Number Dialed with the Numeric Buttons
Adjusting the Sending Quality
A PBX (Private Branch Exchange) is an on-site telephone switchboard. If your machine is
connected through a PBX or other telephone switching systems, you have to dial the outside line access number first, and then the number of the party you are calling.
(1) Make sure that the power is turned on.
See Operation Panel.
(2) Load a document on the Platen Glass or in the ADF.
See Loading Originals.
When sending a double-sided document, set the document on the Platen Glass. You
cannot scan double-sided documents from the ADF.
For details on the types and conditions of documents which you can fax, see Originals
You Can Load.
(3) Press the FAX button.
The fax standby screen will appear.

(4) Adjust the density (scan contrast) or image quality (fax resolution) as necessary.
See Adjusting the Sending Quality.
(1) Use the Numeric buttons to dial the recipient's number.

(2) Press the Color button for color sending, or the Black button for black & white
sending.
Color sending requires that the recipient's fax machine supports color faxing.
(3) Press the OK button.
Advanced Guide · Troubleshooting

The machine starts sending the fax.
When loading two or more documents
Load the next page, and press the same button as you pressed in (2) of step 2. Repeat
the same procedure to scan all pages of the document, and press the OK button.
When you have sent the first page with the Black button, the following pages will be sent
in black and white.
(1) Use the Numeric buttons to dial the recipient's number.
(2) Press the Color button for color sending, or the Black button for black & white
sending. The machine scans the document automatically and starts sending the fax.
Color sending requires that the recipient's fax machine supports color faxing.
To cancel sending a fax, press the Stop button, and follow the instructions on the LCD.
If documents remain in the ADF after pressing the Stop button during scanning, "Close the
Eject the document" will appear on the LCD. Press the OK button so that the remaining document is automatically fed out. Automatic redialing
When sending a fax and the recipient's line is busy, the machine will redial the number after a
specified interval. Auto redial is enabled by default. Auto redial can be enabled or disabled by selecting ON or OFF. Select ON to specify the number of redialing in Redial times and redialing interval in Redial interval.
(1) Make sure that the power is turned on.
See Operation Panel.
(2) Load a document on the Platen Glass or in the ADF.
See Loading Originals.
(3) Press the FAX button.
The fax standby screen will appear.
(4) Adjust the image density (scan contrast) or quality (fax resolution) as necessary.
See Adjusting the Sending Quality.
(1) Press the Redial/Pause button.
Most recently dialed fax number using the Numeric buttons will appear.
(+) button to select the number to redial.

(3) Press the OK button.
The selected number will appear in the fax standby screen.
feeder cover [OK] · (2) Use the · (-) or

Press the Color button for color sending, or the Black button for black & white sending.
Color sending requires that the recipient's fax machine supports color faxing.
You can adjust the density (scan contrast) or image quality (fax resolution) of the document you send. Contrast is the degree of difference between light and dark. Increasing the scan contrast thickens the whole fax image, or light penciled texts and such can be thickened. The higher you set the image quality setting, the better the output quality will be at the other end, but the longer it will take for the transmission. Adjust the density and image quality according to the type of document you are sending.
The Scan contrast screen will appear.
(+) button to select the density.

(-) button decreases the contrast, and pressing the
(+) button increases the contrast.
(2) Press the OK button.
The Scan resolution screen will appear.
(+) button to select the image quality.

Standard: Suitable for text-only documents.
Fine: Suitable for fine-print documents.
Extra fine: Suitable for detailed illustration or fine-print quality documents.
If the recipient's fax machine is not compatible with Extra fine (300x300dpi), the fax will be sent in the Standard or Fine resolution.
Photo: Suitable for photographs.
The color fax is sent with the resolution for Photo.
(2) Press the OK button.

Contents > Faxing > Using Various Sending Functions
You can send a fax in various ways as follows. For details, refer to the on-screen manual: Advanced Guide.
You can send a fax manually after speaking on telephone if you want to talk to the recipient before sending a fax, or if the recipient has a fax machine that can not receive fax automatically. You can dial with the telephone connected to the machine.

Registering fax or telephone numbers for coded speed dial or group dial enables you to send faxes easily.


Broadcasting)
You can select the recipient's numbers registered in coded speed dial or group dial and send the same document to several recipients (max. 21 destinations) in one operation.
Advanced Guide · Troubleshooting


To prevent dialing a wrong number, the machine allows you to enter the recipient's number with the Numerical buttons, the Color or Black button, or the OK button, and reenter the recipient's number again for confirmation.

If the machine is connected to a computer, you can send faxes using the fax driver from any application software that has a printing function.

Searches names registered for coded speed dial to display them, and dials them.
You can use many information services such as banks, airline reservations, or hotel reservations.
These services require tone dialing for their services, so that you need to temporarily switch to tone dialing if your machine is connected to a rotary pulse line.
The machine has various settings for receiving faxes as follows. Change the settings as necessary. For details, refer to the on-screen manual: Advanced Guide.
Sends faxes in ECM (Error Correction Mode). When the recipient's fax machine is compatible with ECM, the machine resends the fax after correcting errors automatically.
Sets the length of time paused for each press of the Redial/Pause button when entering fax/ telephone number.
Selects the fax sending speed.

Color transmission
When faxing color documents using the ADF, scan documents in black & white and send them if the recipient's fax machine does not support color faxing.
Prints a sending report automatically after the machine sends faxes. You can select Do not print, Print error only, or Print for each TX.
The machine sends faxes after confirming the dial tone.
Checks whether the dialed fax/telephone number and the recipient's fax/telephone number are the same. If not, stop sending faxes.

Contents > Faxing > Receiving Faxes
This section describes the operation to receive a fax with the machine depending on the receive mode. This section also describes the operation to print documents stored in the memory of the machine such as when an error occurred.
Preparing for Receiving a Fax
Receiving a Fax in Each Receive Mode
Receiving a Fax in the Memory of the Machine (Memory Receiving)
Prepare for receiving a fax according to the following procedure.
See Operation Panel.
See Setting the Receive Mode.
See Loading Plain Paper/Photo Paper.
(1) Press the FAX button.
(2) Press the Settings button.
Page size will appear on the screen.
(3) Specify the page size.
You can specify A4, 8.5"x11"(LTR), or Legal (or 8.5"x14").
(4) Press the OK button.
The specified settings will be selected.
(1) Press the FAX button.
If you want to use a single telephone line for faxes and voice calls, you need to connect a
telephone or an answering machine to the External Device Jack of this machine.
The operation for receiving a fax varies depending on the receive mode. For the receive mode, see
Setting the Receive Mode.
Advanced Guide · Troubleshooting

When the receive mode is in Fax priority mode, receive a call as follows.

Fax: The machine will receive it automatically.

Voice call: The machine will ring when a voice call incomes.
Pick up the handset, and press the Stop button to answer the call

When the machine rings, pick up the handset before pressing the Stop button. If the Stop
button is pressed before picking up the handset, the telephone call will be disconnected.
It takes a little time until the machine rings when the call is a voice call.
If a telephone is connected to the machine, the telephone will ring when the call incomes
regardless of the receive mode. For Fax priority mode
When the receive mode is in Fax priority mode, select Fax priority mode in Reception settings
under Fax settings and change the following settings. Ring start time: The time the machine takes to determine whether a call is a fax or a voice call Telephone ring time: The time the machine rings when the call was a voice call Default action: Whether or not the machine receives the fax after the specified ring time has elapsed
When the receive mode is in Fax only mode, the machine will receive a fax automatically if a fax incomes thorough a dedicated telephone line for fax.


The machine will not ring when it receives faxes.
If you want to use the machine with a telephone or answering machine, connect it to the
machine and change to Fax priority mode or TEL priority mode.
When the receive mode is in TEL priority mode, receive a call as follows.

When the telephone rings, pick up the handset.
Fax: The telephone will ring. If you pick up the handset and hear the fax tone, the machine will switch to the fax automatically and receive the fax.
If the machine will not switch to the fax, press the Color or Black button to receive the fax.

Voice call: Pick up the handset to answer the call.
When connecting the answering machine:
Voice call: The answering machine responds to the call.
Fax: The machine receives the fax automatically.

The machine can be set to receive faxes automatically after the telephone rings for a specified
length of time. Set Manual/auto switch in Reception settings under Fax settings to ON, and then specify the automatic reception start time. Refer to the on-screen manual: Advanced Guide.
If the telephone connecting to the machine is located away from the machine, pick up the

handset of the telephone connecting to the machine and dial 25 (the remote reception ID) to receive faxes (remote reception). The remote reception is only available for the touch tone dial. The remote reception can be disabled. Refer to the on-screen manual: Advanced Guide.
Set your answering machine to answering mode and adjust it as follows:
- The entire message should be no longer than 15 seconds. - In the message, tell your callers how to send a fax.
If you have subscribed to Duplex Ringing service in Hong Kong, the machine will receive faxes
automatically even if you set the receiving mode of the machine to TEL priority mode.
For Distinctive Ring Pattern Detection (DRPD): When the receive mode is DRPD, receive a call as follows.

The machine judges whether call is voice or fax by the ringing pattern. In the meanwhile the telephone rings.
Fax: The machine will receive it automatically when the machine detects the registered fax ring pattern.

Voice call: The telephone continues to ring. Pick up the handset to answer the call.
If you selected DRPD, you need to select the appropriate ring pattern on the machine. For
details, see Setting the DRPD Ring Pattern (US and Canada only).
When the receive mode is Network switch, receive a call as follows.
The machine judges whether call is voice or fax by the ringing pattern. In the meanwhile the telephone rings.

Fax: The machine will receive it automatically when the machine detects the registered fax ring pattern.
Voice call: The telephone continues to ring. Pick up the handset to answer the call.
The name of this service varies depending on the country or region of purchase. This setting
may not be also available depending on the country or region of purchase.
To use this feature, you need to subscribe to a compatible service provided by your telephone
company. Contact your telephone company for details.
Receiving)
If the machine was not able to send a fax, or if the machine was not able to print a received fax, the machine stores the unsent or unprinted fax in its memory (memory receiving). If an error occurred when sending a fax, they are not stored. You can print a list of stored documents (the memory list) or print a specified document.
If you disconnect the power plug, all the documents stored in memory are deleted. Send or print
necessary documents before disconnecting the power plug.
If the machine receives a fax under one of the following conditions, the machine will automatically store the received fax in its memory.
Ink has run out while receiving a fax.
Replace the empty FINE cartridge. The fax in memory will be automatically printed.
You can set to print received faxes forcibly even if an ink has run out.
However, a part of contents or all contents of the fax may not be printed since the ink has run out. And also, the contents of fax will not be stored in memory. In addition, if ink has already run out, it is recommended that OFF be selected for Auto print in User settings to store the received fax in memory once and print the fax manually after replacing the FINE Cartridge. For details, refer to the on-screen manual: Advanced Guide.
Paper has run out while receiving a fax:
Load the paper and press the OK button. The fax in memory will be automatically printed.
Paper other than A4, Letter, or Legal-sized papers are loaded.
Load A4, Letter, or Legal-size paper, and confirm the paper setting. See Preparing for Receiving a Fax.
You pressed the Stop button to cancel printing of a fax.
Press the FAX button.
The machine can store up to approximately 50 pages (approximately 20 documents)* of faxes in
memory.
When OFF is selected for Auto print in User settings, print the faxes stored in memory from the
Memory reference screen. For details, see Other Basic Setting Items.
If the memory becomes full, the machine cannot receive any more faxes. Print or delete the
documents stored in memory, and make the sender resend the faxes. See Printing Faxes in the Memory.

* When using ITU-T No.1 chart (Standard mode)

Contents > Faxing > Using Various Receiving Functions
The machine has various receiving functions as follows. For details, refer to the on-screen manual: Advanced Guide.
Select ON in Fax reception reject to reject faxes from the uninformed numbers, the numbers which are not registered to the coded speed dial, or the numbers registered as reject number.

(A) Recipient's fax/telephone number is not informed. (B) Recipient's fax/telephone number is registered to the rejected number. (C) Recipient's fax/telephone number is not registered to the coded speed dial.
If the machine is located away from the telephone, pick up the handset of the telephone connected to the machine and dial 25 (the remote reception ID) to receive faxes (remote reception). The remote reception can be enabled or disabled with Remote RX. Select ON to change Remote RX ID (remote reception ID).

The various settings of the machine for receiving faxes are listed below. Change the settings as necessary. For details, refer to the on-screen manual: Advanced Guide.
Receives faxes in ECM (Error Correction Mode). When the sender's fax machine is compatible with ECM, it resends the fax after correcting errors automatically.
Selects the detailed settings when the receive mode is set to Fax priority mode.
Advanced Guide · Troubleshooting

Manual/auto switch
Receives faxes automatically after the external device rang a specified length of time when the receive mode is set to TEL priority mode.
Reduces to print received faxes automatically so that they fit in the selected page size.
Selects the fax receiving speed.
Prints a reception report automatically after the machine receives faxes. You can select Do not print, Print error only, or Print for each TX.
Rejects the calls from the specific destinations if you have subscribed to the Caller ID service.
This setting may not be available depending on the country or region of purchase.

Contents > Faxing > Using Useful Fax Functions
The machine has various fax functions as follows. For details, refer to the on-screen manual: Advanced Guide.
Print memory list: Prints a list of documents in the memory. Print specified doc.: Prints a specified document in the memory. Delete specified doc.: Deletes a specified document in the memory. Print all RX docs: Prints all received documents in the memory at the same time. Delete all documents: Delete all documents in the memory at the same time.
Prints the history of sent and received faxes. The machine prints an Activity report after every 20 transactions.


Coded speed dial: Registers a frequently used fax/telephone number for a coded speed dial code. Group dial: Registers two or more fax/telephone numbers for a group dial. Rejected numbers: Registers a fax/telephone number to reject a call for a reject number.
If the machine receives a fax under one of the following conditions, the machine will not be able to print the received fax and will automatically store it in its memory.
Ink has run out while receiving a fax.
Paper has run out while receiving a fax.
Paper other than A4, Letter, or Legal-sized papers are loaded.
OFF is selected for Auto Print in User Settings.

You pressed the Stop button to cancel printing of a fax.
See Loading Plain Paper/Photo Paper.
(1) Press the FAX button, and press the Menu button.
(+) button to select Memory reference, and press the OK button.
(+) button to select Print all RX docs.

To print the list of documents in the memory, select Print memory list.
To print a specified document, select Print specified doc..
To delete a specified document, select Delete specified doc..
To delete all documents in the memory at the same time, select Delete all documents.
(2) Press the OK button.
(+) button to select Yes, and press the OK button. The machine starts printing documents in the memory one by one.

(+) button to select Yes.

To keep the document in the memory, select No.
(5) Press the OK button.
The deletion confirmation screen will appear each time after one document is printed.
Repeat the same procedure until all documents are printed.

Contents > Other Usages
This section describes the operation to print the notebook or graph paper, the setting items of the machine, and the function to print directly from a digital camera or mobile phone. This section also introduces other useful functions; Solution Menu and My Printer.
Printing the Various Template Forms
Printing Photos from a PictBridge Compliant Device Printing Photos from a Wireless Communication Device
Solution Menu and My Printer
Advanced Guide · Troubleshooting

Contents > Other Usages > Printing the Notebook or Graph Paper
This section describes the operation to select and print the template forms.

A4, B5 or Letter-sized plain paper. See Media Types You Can Use.
(1) Make sure that the power is turned on.
See Operation Panel.
(2) Make sure that the A4, B5, or Letter-sized plain papers are loaded in the Rear
Tray. See Loading Plain Paper/Photo Paper.
(3) Open the Paper Output Tray gently.
(1) Press the Menu button repeatedly until Template print appears.
(+) button to select a template form to print, and press the OK button.

For details on the available template forms, see Printing the Various Template Forms.
(+) button to specify the page size, and press the OK button.

You can only select A4, B5, or 8.5"x11"(LTR) for Page size. B5 may not be available
depending on the selected template.
(+) button or the Numeric buttons to specify the number of copies, and press the OK button. The machine starts printing.
This section describes the template forms you can select in Template print.



8 mm spacing Notebook paper 2
7 mm spacing Notebook paper 3



Checklist List with checkboxes


Staff paper 1 Staff paper 10 staves
Staff paper 2 Staff paper 12 staves

Page 78 of 817 pages Printing Photos Directly from Your Digital Camera or Mobile Phone
Contents > Other Usages > Printing Photos Directly from Your Digital Camera or Mobile Phone
Connecting the PictBridge compliant device to this machine with a USB cable that is recommended by the device's manufacturer, you can print saved images directly. For details on how to print saved images connecting with the PictBridge compliant device, refer to the on- screen manual: Advanced Guide. For details on the print settings on the PictBridge compliant device, refer to the instruction manual supplied with the device.

Any PictBridge compliant device can be connected to this machine regardless of the manufacturer or model as long as it is compliant with the PictBridge Standard.
PictBridge is the standard to print your photos directly without using a computer, connecting a
device such as a digital still camera, digital camcorder, or camera-equipped mobile phone.
(PictBridge) A device with this mark is PictBridge compliant.
This machine accepts images* taken with a camera compliant with the Design rule for Camera File system and PNG files. *Exif 2.2/2.21 compliant
When printing from the PictBridge compliant device, set the print quality using the Operation Panel on
the machine. You cannot set the print quality on the PictBridge compliant device.
If the optional Bluetooth Unit BU-30 is connected to the machine, you can print image data with wireless communication from Bluetooth compatible mobile phones or computers. For details, refer to the on-screen manual: Advanced Guide.
Advanced Guide · Troubleshooting

Page 79 of 817 pages Printing Photos Directly from Your Digital Camera or Mobile Phone


Contents > Other Usages > Machine Settings
This section describes the items you can set or change with each setting menu. For details on setting or changing, refer to the on-screen manual: Advanced Guide. For information on the items you can set or change in the Fax settings menu, see Other Basic Setting Items, Settings for Sending Faxes , orSettings for Receiving Faxes .
Use this setting only if the print surface becomes smudged.
Extended copy amt.
Selects the amount of image that extends off the paper when making borderless copies.
Adjusts the beep volume when pressing the buttons on the Operation Panel, or the alarm volume.
Selects the country where you are using the machine.
This setting may not be available depending on the country or region of purchase.
Changes the language for LCD messages and menus.
Enables this function if you want to reduce the operating noise of the machine, such as when using the machine at night (when copying, printing from the PictBridge compliant device, printing with wireless communication, etc.).
Enables to increase or decrease numbers rapidly by pressing and holding down the button when inputting numbers. When this setting is disabled, holding down the button is the same as pressing it once.
Specifies paper, layout, etc. when you print from the wireless communication device. This setting appears only when the optional Bluetooth Unit is connected to the machine.
Changes the Bluetooth settings, such as the device name or passkey. This setting appears only when the optional Bluetooth Unit is connected to the machine.
Specifies paper, print quality, etc. when you print from the PictBridge compliant device.
Advanced Guide · Troubleshooting

Reset setting
Sets the machine settings back to the default by selecting Telephone no. data, Setting data, or All data. However, the values set for the print head alignment and the language set in the Language selection are not reset.

Contents > Other Usages > Solution Menu and My Printer
Using Solution Menu or My Printer, you can easily get the information on the machine or change the print settings by only clicking buttons on a screen. With Solution Menu, you can start the software applications supplied with the machine or display the operating instructions. It also provides you with the information on troubleshooting. With My Printer, you can display the printer driver setup window of the printer driver. It also provides you with the information on how to take an action when you have trouble with the operation. My Printer is not available in Macintosh.
(Solution Menu) on the desktop.
(Solution Menu) in the Dock.
* The screens below are for Windows Vista.

Click the button of a function to use.
After starting Solution Menu, click the button on the title bar to reduce the window size.

Install Solution Menu from the Setup CD-ROM when it has not been installed or has been
uninstalled. To install Solution Menu, select Solution Menu in Custom Install.
The buttons displayed on the screen may vary depending on the country or region of purchase.
To start Solution Menu from the Start menu, select All Programs (Programs in Windows 2000),
Canon Utilities, Solution Menu, then Solution Menu.
To start Solution Menu from the menu bar, select the Go menu, Applications, Canon Utilities, Solution
Menu, then double-click Solution Menu.
(My Printer) on the desktop.
Advanced Guide · Troubleshooting


You can also start My Printer from Solution Menu.
Install My Printer from the Setup CD-ROM when it has not been installed or has been uninstalled. To
install My Printer, select My Printer in Custom Install.
To start My Printer from the Start menu, select All Programs (Programs in Windows 2000), Canon
Utilities, My Printer, then My Printer.

Contents > Loading Paper / Originals
This section describes types of paper or originals you can load, how to load printing paper in the Rear Tray, and how to load originals to copy or scan, or documents for faxing.
Loading Plain Paper/Photo Paper Loading Envelopes Media Types You Can Use Media Types You Cannot Use
Position to Load an Original Loading an Original on the Platen Glass Loading a Document in the ADF Originals You Can Load
Advanced Guide · Troubleshooting

Contents > Loading Paper / Originals > Loading Paper
Loading Plain Paper/Photo Paper
Media Types You Can Use
Media Types You Cannot Use
If you cut plain paper into small size such as 4" x 6" / 10 x 15 cm, 4" x 8" / 101.6 x 203.2 mm, 5" x 7"
/ 13 x 18 cm, or 2.16" x 3.58" / 55.0 x 91.0 mm (Card size) to perform trial print, it can cause paper jams.
We recommend Canon genuine photo paper for printing photos.
For details on the Canon genuine paper, see Media Types You Can Use .
You can use general copy paper.
For the page size and paper weight you can use for this machine, see Media Types You Can Use .
Align the loading paper. Flatten the four corners of paper before loading it.

Align the edges of paper neatly before loading. Loading paper without aligning the edges may
cause paper jams.
If paper is curled, hold the curled corners and gently bend them in the opposite direction until
the paper becomes completely flat. For details on how to flatten curled paper, refer to " Troubleshooting" in the on-screen manual: Advanced Guide.
(1) Open the Paper Support, and open the support as an extension.
(2) Open the Paper Output Tray gently.
Advanced Guide · Troubleshooting · Loading Envelopes


(3) Slide the Paper Guides (A) to open them, and load the paper in the center of the
Rear Tray WITH THE PRINT SIDE FACING YOU.
Always load paper in the portrait orientation (B). Loading paper in the landscape
orientation (C) can cause paper jams.

(4) Slide the Paper Guides (A) to align them with both sides of the paper stack.
Do not slide the Paper Guides too hard. The paper may not be fed properly.

Do not load sheets of paper higher than the Load Limit Mark (D).


The machine may make an operating noise when feeding paper. After loading paper
When using the machine to copy, select the size and type of the loaded paper in Page size and Media
type of the setting options. See Changing the Settings in "Making Copies".
When printing with a computer, select the size and type of the loaded paper in Printer Paper Size (or
Paper Size) and Media Type in the printer driver. See Printing Documents (Windows) or Printing Documents (Macintosh) .

Contents > Loading Paper / Originals > Loading Paper > Loading Envelopes
You can print on European DL and US Comm. Env. #10-sized envelopes. The address is automatically rotated and printed according to the envelope's direction by specifying with the printer driver properly.
You can only print on envelopes with the computer.
You cannot use the following envelopes.
- Envelopes with an embossed or treated surface - Envelopes with a double flap (or sticker flaps) - Envelopes whose gummed flaps are already moistened and adhesive
In Windows, the message on how to load envelopes will appear when printing on them.
This message will not appear next time if you select the Do not show this message again. check box.
Press down on all four corners and edges of the envelopes to flatten them.

If the envelopes are curled, hold the opposite corners and gently twist them in the
opposite direction.

If the corner of the envelope flap is folded, flatten it.
Use a pen to press the leading edge in the inserting direction flat and sharpen the
crease.

The figure above show a side view of the leading edge of the envelope.
The envelopes may jam in the machine if they are not flat or the edges are not aligned. Make
sure that no curl or puff exceeds 0.1 inches / 3 mm.
(1) Open the Paper Support.
Do not open the support as an extension.
Advanced Guide · Troubleshooting


(2) Open the Paper Output Tray gently.
(3) Slide the Paper Guides (A) to open them, and load the envelopes in the center of
the Rear Tray WITH THE ADDRESS SIDE FACING YOU. The folded flap of the envelope will be faced down on the left side.
Up to 10 envelopes can be loaded at once.
(4) Slide the Paper Guides (A) to align them with both sides of the envelopes.
Do not slide the Paper Guides too hard. The envelopes may not be fed properly.

(1) Select Envelope in Commonly Used Settings (or Media Type).
(2) Select the size for envelopes.
Select DL Env. or Comm. Env. #10 in the Envelope Size Setting window.
Select DL Envelope or #10 Envelope in Paper Size.
(3) Select Landscape in Orientation.
If you do not specify Envelope Size Setting (or Printer Paper Size/Paper Size) or Orientation
properly, the address will be printed upside down or will be turned to 90 degrees.
The machine may make an operating noise when feeding paper.
In Windows, if the print result is upside down, select Rotate 180 degrees in Additional
Features with the printer driver.
For details on the printer driver settings, see Printing Documents (Windows) or Printing
Documents (Macintosh).
(B) Rear side · (C) Address side



Contents > Loading Paper / Originals > Loading Paper > Media Types You Can Use
Choose paper suitable for printing, for the best print results. Canon provides you various types of paper to enhance the fun of printing, such as stickers as well as papers for photo or document. We recommend the use of Canon genuine paper for printing your important photos.
A4, Letter / 8.5" x 11", 5" x 7" / 13 x 18 cm, and 8" x 10" / 20 x 25 cm: 10 sheets
4" x 6" / 10 x 15 cm: 20 sheets

301>*3 1 sheet *4 - T-Shirt Transfers
1 sheet -*7 Glossy Photo Paper
*1 Paper with a Model Number is Canon genuine paper. Refer to the instruction manual supplied with the paper for detailed information on the printable side and notes on handling paper. For information on the page sizes available for each Canon genuine paper, visit our website. You may not be able to purchase some Canon genuine papers depending on the country or region of purchase. Paper is not sold in the US by Model Number. Purchase paper by name.
*2 Proper feeding of paper may not be possible at the maximum capacity depending on the type of paper or environmental conditions (either very high or low temperature or humidity). In such cases, reduce the number of paper you load at a time to less than half (100% recycled paper can be used).
*3 Available only when printing from your computer.
*4 We recommend that you remove the previously printed sheet from the Paper Output Tray before continuously printing to avoid blurs and discoloration.
*5 When loading paper in stacks, the print side may become marked as it is fed or paper may not feed properly. In this case, load one sheet at a time.
*6 When printing photos onto stickers from your computer, you can specify the print setting easily by using the Easy-Photo Print EX provided with the Setup CD-ROM.
*7 When copying onto sticker paper, be sure to select Sticker copy on Special copy menu. To copy onto sticker paper, the type of paper does not need to be specified. See Using Various Copy Functions .
You can use the following page sizes.
In Macintosh, Choukei 3 and Choukei 4 are not available.
Letter (8.50 x 11.00 inches / 215.9 x 279.4 mm)
Legal (8.50 x 14.00 inches / 215.9 x 355.6 mm)
A5 (5.83 x 8.27 inches / 148.0 x 210.0 mm)
A4 (8.27 x 11.69 inches / 210.0 x 297.0 mm)
B5 (7.17 x 10.12 inches / 182.0 x 257.0 mm)
4" x 6" (4.00 x 6.00 inches / 10 x 15 cm)
4" x 8" (4.00 x 8.00 inches / 101.6 x 203.2 mm)
5" x 7" (5.00 x 7.00 inches / 13 x 18 cm)
8" x 10" (8.00 x 10.00 inches / 20 x 25 cm)
L (3.50 x 5.00 inches / 89.0 x 127.0 mm)
2L (5.00 x 7.01 inches / 127.0 x 178.0 mm)
Hagaki (3.94 x 5.83 inches / 100.0 x 148.0 mm)
Hagaki 2 (7.87 x 5.83 inches / 200.0 x 148.0 mm)
Comm. Env. #10 (4.12 x 9.50 inches / 104.6 x 241.3 mm)
DL Env. (4.33 x 8.66 inches / 110.0 x 220.0 mm)
Choukei 3 (4.72 x 9.25 inches / 120.0 x 235.0 mm)
Choukei 4 (3.54 x 8.07 inches / 90.0 x 205.0 mm)
Youkei 4 (4.13 x 9.25 inches / 105.0 x 235.0 mm)
Youkei 6 (3.86 x 7.48 inches / 98.0 x 190.0 mm)
Card (2.16 x 3.58 inches / 55.0 x 91.0 mm)
Wide (4.00 x 7.10 inches / 101.6 x 180.6 mm)
You can also specify a custom size within the following range.
T-Shirt Transfers

Paper Weight
17 to 28 lb / 64 to 105 gsm (plain paper except for Canon genuine paper) Do not use heavier or lighter paper (except for Canon genuine paper), as it could jam in the machine.
Take out only the necessary number of paper from the package, just before printing.
To avoid curling, when you do not print, put unused paper back into the package and keep it on a
level surface. And also, store it avoiding heat, humidity, and direct sunlight.

Contents > Loading Paper / Originals > Loading Paper > Media Types You Cannot Use
Do not use the following types of paper. Using such paper will not only produce unsatisfactory results, but can also cause the machine to jam or malfunction.
Folded, curled, or wrinkled paper
Paper that is too thin (weighing less than 17 lb / 64 gsm)
Paper that is too thick (plain paper, except for Canon genuine paper, weighing more than 28 lb / 105
Paper thinner than a postcard, including plain paper or notepad paper cut to a small size (when
printing on A5 or smaller sized paper)
Postcards affixed with photos or stickers
Envelopes with a double flap (or sticker flaps)
Envelopes with an embossed or treated surface
Envelopes whose gummed flaps are already moistened and adhesive
Any type of paper with holes
Paper that is not rectangular
Paper bound with staples or glue
Paper decorated with glitter, etc.

Contents > Loading Paper / Originals > Loading Originals
This section describes how to load originals on the Platen Glass or in the ADF.
Position to Load an Original
Loading an Original on the Platen Glass
Loading a Document in the ADF
Originals You Can Load
The machine has two positions to load an original: Platen Glass and ADF. Select the position to load the original according to the size or type or usage. See Originals You Can Load .
When copying, faxing, or scanning documents, photos, or book page by page, load it on the Platen Glass. To scan original at optimum quality, also load it on the Platen Glass.

When copying, faxing, or scanning two or more sheets of document of the same size, thickness, and weight at one time, load it in the ADF. You can also load a sheet of document in the ADF.

Advanced Guide · Troubleshooting

Contents > Loading Paper / Originals > Loading Originals > Loading an Original on the Platen Glass
Load originals to copy, fax, or scan an original on the Platen Glass.
After loading the original, be sure to close the Document Cover before starting to copy, fax, or
scan.
When scanning from a computer using a software application or saving the scanned data by
selecting PC on the Save to menu in the scan mode using the Operation Panel on the machine, you need to load originals in a different way. For details, refer to the on-screen manual: Advanced Guide.
(1) Open the Document Cover.
Do not place any object on the Document Cover. It will fall into the Rear Tray when the
Document Cover is opened and cause the machine to malfunction.
(2) Load the original with the side to copy, fax, or scan FACING DOWN on the
Platen Glass.
Align the corner of the original with the alignment mark

Do not place any object weighing more than 4.4 lb / 2.0 kg on the Platen Glass.
Do not press or put weight on the original with pressure exceeding 4.4 lb / 2.0 kg. Doing
so may cause the scanner to malfunction or the Platen Glass to break.
The machine cannot scan the shaded area (A) (0.04 inches / 1 mm from the edges of the
Platen Glass).

When you press the SCAN button to select USB flash drive, and specify Scan size, Scan
Advanced Guide · Troubleshooting

size is the one measured from the alignment mark
Do not hold the LCD or the Operation Panel.

Be sure to hold the Document Cover firmly when closing it, and be careful not to get your
fingers caught.

Contents > Loading Paper / Originals > Loading Originals > Loading a Document in the ADF
Load a document to copy, fax, or scan in the ADF.
To scan a document at optimum quality, load it on the Platen Glass.
(1) Open the Document Tray.

(2) Insert the document in the Document Tray until it beeps.
Load the document with the side to copy, fax, or scan FACING UP in the Document Tray.

When Alarm volume is set to OFF, the alarm will not beep even if the document is inserted
in the Document Tray.
(3) Adjust the Document Guides to match the width of the document.
Do not slide the Document Guides too hard. The originals may not be fed properly.
Advanced Guide · Troubleshooting



Contents > Loading Paper / Originals > Loading Originals > Originals You Can Load
The originals you can load on the Platen Glass or in the ADF for copying, scanning, or faxing are as follows:
Multipage plain documents of the same size, thickness, and weight
magazines, etc.)
Documents that are not
suitable for the ADF
Size (W x L) Max. 8.5 x 11.7 inches / 216 x 297 mm
Max. 8.5 x 14.0 inches / 216 x 356 mm
Min. 5.8 x 5.8 inches / 148 x 148 mm
Only A4 or Letter-sized documents for 2-on-1 copy and 4-on-1 copy
paper), up to 0.16 inches / 4 mm in height
up to 0.04 inches / 1 mm in height
Thickness Max. 0.39 inches / 10 mm 0.002 to 0.005 inches / 0.06 to 0.13 mm
Weight - 13 to 24 lb / 50 to 90 gsm
Make sure any glue, ink, correction fluid, or the like on the document is completely dry before
loading it on the Platen Glass or in the ADF. However, do not load glued documents in the ADF even if the glue is dry, as this may cause paper jams.
Remove all staples, paper clips, and the like before feeding the document.
Load Legal-sized documents in the ADF.
Do not load the following types of documents in the ADF. They will jam.
- Wrinkled or creased paper - Curled paper - Torn paper - Paper with holes - Glued paper - Carbon paper or carbon-backed paper - Surface treated paper - Onion skin or thin paper - Photo or thick paper

Contents > Routine Maintenance
This section describes how to replace FINE Cartridges when they run out of ink, to clean the machine when the print result is faint, or to take an action when paper does not feed properly.
Printing the Nozzle Check Pattern Examining the Nozzle Check Pattern Cleaning the Print Head Cleaning the Print Head Deeply Aligning the Print Head
Replacing Procedure Checking the Ink Status
Advanced Guide · Troubleshooting

Page 102 of 817 pages When Printing Becomes Faint or Colors Are Incorrect
Contents > Routine Maintenance > When Printing Becomes Faint or Colors Are Incorrect
If print results are blurred or colors are not printed correctly, the pint head nozzles (FINE Cartridges) are probably clogged. Follow the procedure below to print the nozzle check pattern, check the print head nozzle condition, then clean the Print Head. If printed ruled lines are misaligned or print results are otherwise unsatisfactory, aligning the Print Head may improve print quality.
Do not rinse or wipe the FINE Cartridges. This can cause trouble with the FINE Cartridges.
Check if ink remains in the FINE Cartridge.
See Checking the Ink Status.
Check if the FINE Cartridges are installed correctly.
See Replacing Procedure.
Check if the orange protective tape on the bottom of the FINE Cartridge is removed.
See Replacing Procedure.
When an error message appears on the LCD, refer to the " Troubleshooting" in the on-screen
manual: Advanced Guide.
Increasing the print quality in the printer driver settings may improve the print result.
For details, refer to the on-screen manual: Advanced Guide.
Step 1

See Printing the Nozzle Check Pattern.
See Examining the Nozzle Check Pattern.
After cleaning the Print Head, print and examine the nozzle check pattern.
If the pattern is missing:
See Cleaning the Print Head.
If the problem is not resolved after cleaning the Print Head
twice:
See Cleaning the Print Head Deeply.
If the problem is not resolved, turn off the power and clean the Print Head deeply again after 24 hours. Do not disconnect the power plug when turning off the power:
See Replacing a FINE Cartridge.
If the problem is still not resolved, contact your service
center.
Are Misaligned:
Advanced Guide · Troubleshooting · Before performing maintenance

Page 103 of 817 pages When Printing Becomes Faint or Colors Are Incorrect
See Aligning the Print Head.
You can also perform the maintenance operations from your computer.
For details, refer to the on-screen manual: Advanced Guide.

Contents > Routine Maintenance > When Printing Becomes Faint or Colors Are Incorrect > Printing the Nozzle Check Pattern
Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzles.
If the remaining ink level is low, the nozzle check pattern will not be printed correctly. Replace the
FINE Cartridge whose ink is low. See Replacing a FINE Cartridge.
See Operation Panel.
(1) Press the Menu button repeatedly until Maintenance appears.
(+) button to select Nozzle check, and press the OK button.

The nozzle check pattern will be printed.
See Examining the Nozzle Check Pattern.

Contents > Routine Maintenance > When Printing Becomes Faint or Colors Are Incorrect > Examining the Nozzle Check Pattern
Examine the nozzle check pattern, and clean the Print Head if necessary.

(1) Check if lines are missing in this pattern.
If yes, the cleaning is required. See Cleaning the Print Head.

(B) Bad (Lines are missing)
(2) Check if white streaks are present in this pattern.
If yes, the cleaning is required. See Cleaning the Print Head.

(B) Bad (White streaks are present)

Contents > Routine Maintenance > When Printing Becomes Faint or Colors Are Incorrect > Cleaning the Print Head
Clean the Print Head if lines are missing or if horizontal white streaks are present in the printed nozzle check pattern. Cleaning unclogs the nozzles and restores the print head condition. Cleaning the Print Head consumes ink, so clean the Print Head only when necessary.
See Operation Panel.
(1) Press the Menu button repeatedly until Maintenance appears.
(+) button to select Cleaning, and press the OK button.

The machine starts cleaning the Print Head.
Do not perform any other operations until the machine completes the cleaning of the Print Head. This takes about 1 minute 30 seconds.
See Printing the Nozzle Check Pattern.
If the problem is not resolved after cleaning the Print Head twice, clean the Print Head deeply.
See Cleaning the Print Head Deeply.

Contents > Routine Maintenance > When Printing Becomes Faint or Colors Are Incorrect > Cleaning the Print Head Deeply
If print quality does not improve by the standard cleaning of the Print Head, clean the Print Head deeply. Cleaning the Print Head deeply consumes more ink than the standard cleaning of the Print Head, so clean the Print Head deeply only when necessary.
See Operation Panel.
(1) Press the Menu button repeatedly until Maintenance appears.
(+) button to select Deep cleaning, and press the OK button.

The machine starts cleaning the Print Head deeply.
Do not perform any other operations until the machine completes the deep cleaning of the Print Head. This takes about 1 minute 30 seconds.
See Printing the Nozzle Check Pattern.
If the problem is not resolved, turn off the power and clean the Print Head deeply again after 24 hours. Do not disconnect the power plug when turning off the power.
If the problem is still not resolved, replace the FINE Cartridge with a new one. See Replacing a FINE Cartridge.
If the problem is still not resolved, contact your service center.

Contents > Routine Maintenance > When Printing Becomes Faint or Colors Are Incorrect > Aligning the Print Head
If printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print head position.
See Operation Panel.
(1) Press the Menu button repeatedly until Maintenance appears.
(+) button to select Manual head align, and press the OK button.

The print head alignment pattern will be printed, and the Set head align value screen will appear.
(+) button to select Print head align value to print the current head position adjustment values.
(1) Check the printed patterns, and use the
(+) button to select the pattern number that has the least noticeable streaks for column A, and press the OK button.


Refer to the samples below to select the pattern that has the least noticeable white
streaks.

(A) Less noticeable vertical white streaks (B) Noticeable vertical white streaks (C) Less noticeable horizontal white streaks (D) Noticeable horizontal white streaks
(2) Repeat the same procedure to input the pattern number for each column from B
to L.
(3) Confirm the message for print head alignment, and press the OK button.
The second page of print head alignment sheets will be printed.
(4) Check the printed patterns and use the
(+) button to input the number of the pattern that has the least noticeable horizontal streaks for column M, and press the OK button.
(-) or


(5) Repeat the same procedure to input the pattern number for each column from N
to R.

Contents > Routine Maintenance > Replacing a FINE Cartridge
When ink runs out while printing is in progress, an error message appears on the LCD or your computer screen. Make sure which FINE Cartridge has run out of ink and replace it with a new one.

If the error message appears, confirm the displayed message and take an appropriate action.
For details, refer to the "An Error Message Is Displayed on the LCD" in the " Troubleshooting" of the on-screen manual: Advanced Guide.
For information on the compatible FINE Cartridges, refer to the printed manual: Getting Started.
When FINE Cartridges run out of ink, follow the procedure below to replace them.
Do not touch the electrical contacts (A) or print head nozzles (B) on a FINE Cartridge. The machine
may not print properly if you touch it.

To maintain optimal print quality, we recommend the use of specified Canon brand FINE Cartridges.
Refilling ink is not recommended.
If you remove a FINE Cartridge, replace it immediately. Do not leave the machine with FINE
Cartridges removed.
Use new FINE Cartridges for replacement. Installing used FINE Cartridges may cause the nozzles to
clog. Furthermore, with such cartridges, the machine will not be able to inform you when to replace the cartridges properly.
Once a FINE Cartridge has been installed, do not remove it from the printer and leave it out in the
open. This will cause the FINE Cartridge to dry out, and the printer may not operate properly when it is reinstalled. To maintain optimal printing quality, use a FINE Cartridge within six months of first use.
If a FINE Cartridge runs out of ink, you can print with either Color or Black FINE Cartridge, in
whichever ink remains, only for a while. However the print quality may be reduced compared to when printing with both cartridges. We recommend to use new FINE Cartridges in order to obtain optimum qualities. Even when printing with one ink only, print with leaving the empty FINE Cartridge installed. If either of the Color FINE Cartridge or Black FINE Cartridge is not installed, an error occurs and the machine cannot print. For information on how to configure this setting, refer to the on-screen manual: Advanced Guide.
Color ink may be consumed even when printing a black-and-white document or when black-and-
white printing is specified. Every ink is also consumed in the standard cleaning and deep cleaning of the Print Head, which may be necessary to maintain the machine's performance. When ink has run out, replace the FINE Cartridge immediately with a new one.
Advanced Guide · Troubleshooting · Handling FINE Cartridges

The FINE Cartridge Holder moves to the replacement position.

Do not hold the FINE Cartridge Holder to stop or move it forcibly. Do not touch the Print Head
Holder until it stops completely.
Do not touch the metallic parts or other parts inside the machine.
Do not place any object on the Document Cover. It will fall into the Rear Tray when the
Document Cover is opened and cause the machine to malfunction.
Do not hold the LCD or the Operation Panel.
If the Document Cover is open, you cannot open the Scanning Unit (Cover). Be sure to lift the
Scanning Unit (Cover) with the Document Cover closed.
The inside of the machine may be stained with ink. Be careful not to stain your hands or
clothing when replacing FINE Cartridges. You can easily wipe off the ink from the inside of the machine with a dry cloth or the like. For details on the cleaning, refer to the on-screen manual: Advanced Guide.
If the Scanning Unit (Cover) is left open, the FINE Cartridge Holder moves to the right. In this
case, close and reopen the Scanning Unit (Cover).
(1) Pinch the tabs and open the Ink Cartridge Locking Cover.
(2) Remove the FINE Cartridge.

Handle FINE Cartridges carefully to avoid staining of clothing or the surrounding area.
Discard empty FINE Cartridges according to the local laws and regulations regarding disposal
of consumables.

(1) Take a new FINE Cartridge out of its package and remove the orange protective
tape (D) gently.

If you shake a FINE Cartridge, ink may spill out and stain your hands and the surrounding area.
Handle a FINE Cartridge carefully.
Be careful not to stain your hands and the surrounding area with ink on the removed
protective tape.
Do not reattach the protective tape once you have removed it. Discard it according to the local
laws and regulations regarding disposal of consumables.
Do not touch the electrical contacts or print head nozzles on a FINE Cartridge. The machine
may not print properly if you touch it.
(1) Put a new FINE Cartridge in the FINE Cartridge Holder.
The Color FINE Cartridge should be installed into the left slot and the Black FINE Cartridge should be into the right slot.
(2) Close the Ink Cartridge Locking Cover to lock the FINE Cartridge into place.
Push down the Ink Cartridge Locking Cover until it clicks.

(3) Confirm that the Ink Cartridge Locking Cover is closed correctly.


(F) Not closed correctly (the cover is tilted)
If the Ink Cartridge Locking Cover is not closed correctly, push down the Ink Cartridge
Locking Cover until it clicks.
The machine cannot print unless both the Color and Black FINE Cartridges are installed. Be
sure to install both the FINE Cartridges.
When setting the Scanning Unit Support back to its original position, be sure to hold the
Scanning Unit (Cover) firmly, and be careful not to get your fingers caught.
Do not hold the LCD or the Operation Panel.
If the error message appears on the LCD after the Scanning Unit (Cover) is closed, refer to the
"Troubleshooting" in the on-screen manual: Advanced Guide.
When you start printing after replacing the FINE Cartridge, the machine starts cleaning the Print
Head automatically. Do not perform any other operations until the machine completes the cleaning of the Print Head. While cleaning is in progress, the ON button is flashing green.
If printed ruled lines are misaligned or the print head position is misaligned, adjust the print head
position. See Aligning the Print Head.
(E) Closed correctly

Contents > Routine Maintenance > Replacing a FINE Cartridge > Checking the Ink Status
You can check the ink status on the LCD. Make sure that the machine is turned on, then press the COPY, FAX, or SCAN button. The current ink level will appear on the LCD for a few seconds.
The ink level detector is mounted on the machine to detect the remaining ink level. The machine
considers as ink is full when a new FINE Cartridge is installed, and then starts to detect a remaining ink level. If you install a used FINE Cartridge, the indicated ink level of it may not be correct. In such case, refer to the ink level information only as a guide.

The four-level ink indicator is displayed in area (A).
is displayed, the ink is running low. You can continue printing for a while, but we recommend you to have a new FINE Cartridge available.
Advanced Guide · Troubleshooting · If

Contents > Routine Maintenance > Cleaning the Paper Feed Roller
If the Paper Feed Roller is dirty or paper powder is attached to it, paper may not be fed properly. In this case, clean the Paper Feed Roller. Cleaning will wear out the Paper Feed Roller, so perform this only when necessary.
(1) Press the Menu button repeatedly until Maintenance appears.
(+) button to select Roller cleaning, and press the OK button.

The Paper Feed Roller will rotate as it is cleaned.
The paper will be ejected after cleaning. If this does not solve the problem, contact your service center.

Appendix
Tips on How to Use Your Machine
Advanced Guide · Troubleshooting · Contents > Appendix

Page 118 of 817 pages Legal Limitations on Use of Your Product and Use of Images
Contents > Appendix > Legal Limitations on Use of Your Product and Use of Images
It may be unlawful to make copies of, scan, print, or use reproductions of the following documents. The list provided is non-exhaustive. When in doubt, check with a legal representative in your jurisdiction.
Postage stamps (canceled or
Internal revenue stamps (canceled or
Identifying badges or insignias
Selective service or draft papers
Bonds or other certificates of indebtedness
Checks or drafts issued by
Copyrighted works/works of art without
Motor vehicle licenses and
permission of copyright owner

Contents > Appendix > Tips on How to Use Your Machine
This section introduces the tips on how to use your machine and for printing with optimal quality.
Ink is used for various purposes.
Ink may be used for purposes other than printing. Ink is not only used for printing, but also for cleaning the Print Head to maintain the optimal printing quality. The machine has the function to automatically clean the ink jet nozzles to prevent clogging. In the cleaning procedure, ink is pumped out from the nozzles. Used ink for nozzle cleaning is limited to a small amount.
The use of each ink varies depending on the color of image to be printed or the contents of document. Black-and-white printing may also use ink other than black ink. So, color ink is consumed even when printing in black-and-white.
Tip!: Check the machine status before printing!
Is the Print Head OK?
If print head nozzles are clogged, print will be faint and papers will be wasted. Print the nozzle check pattern to check the Print Head. See When Printing Becomes Faint or Colors Are Incorrect .
After printing large quantities of paper or performing borderless printing, the area where papers go through may get smeared with ink. Clean the inside of your machine with the Bottom Plate Cleaning. Refer to the on-screen manual: Advanced Guide.
Is the paper loaded in the correct orientation?

To load paper in the Rear Tray, load paper with the printing side facing you.
The curled paper causes paper jam. Flatten the curled paper, then reload it. Refer to "Troubleshooting" in the on-screen manual: Advanced Guide.
After loading paper, be sure to select the loaded paper in Media type of the Operation Panel or Media Type of the printer driver. If the type of paper is not selected, you may not be able to get the satisfactory print result.
Advanced Guide · Troubleshooting

See Loading Paper. There are various types of paper: paper with special coating on the surface for printing photos with optimal quality and paper suitable for documents. Media type of the Operation Panel or Media Type of the printer driver has different settings for each type of paper in advance (such as using ink, ejecting ink, or distance from nozzles) so that you can print on each paper with the optimal image quality. You can print with different settings in Media type (or Media Type) suitable for each type of loaded paper.
Tip!: Never press the ON button!
If you press the ON button while printing is in progress, the print data sent from the computer queues in the machine and you may not be able to continue to print. Press the Stop button to cancel printing.
If you cannot cancel printing by pressing the Stop button while printing from a computer, open the
printer driver setup window to delete the unnecessary print jobs from the printer status monitor (Windows).
The key to printing with the optimal printing quality is to prevent the Print Head from drying or clogging. Always follow the following steps for optimal printing quality.
Follow the procedure below to disconnect the power plug.
1 Press the ON button on the machine to turn it off. 2 Make sure that the ON button is not lit. 3 Disconnect the power plug from the wall outlet, or turn off the extender cable connector. If you press the ON button to turn off the power, the machine caps the Print Head (nozzles) automatically to prevent from drying. If you disconnect the power plug from the wall outlet or turn off the extender cable connector before the light of the ON button is turned off, the Print Head will not be capped properly and this will cause drying or clogging. To disconnect the power plug, be sure to follow this procedure.
Just as the tip of a felt pen becomes dry and unusable if it has not been used for a long time, even if it is capped, the Print Head too, may become dried or clogged if the machine has not been used for a long time. We recommend the machine to be used at least once a month.
Depending on the type of paper, ink may blur if you trace the printed area with a highlight pen or
paint-stick, or bleed if water or sweat comes in contact with the printed area.
transporting?
Tip!: Do not use or transport the machine vertically or slanted!
If the machine is used or transported vertically or slanted, the machine may become damaged or ink may leak from the machine. Be sure not to use or transport the machine vertically or slanted.


Do not place any object on the Document Cover. It will fall into the Rear Tray when the Document Cover is opened and cause the machine to malfunction. Also, place the machine where objects will not fall on it.

Colors are uneven, and print results are blurred.
clogged.
If the print head nozzles are clogged, colors may become uneven or the print results may be blurred.

Print the nozzle check pattern
Check the printed check pattern to see if the nozzles are clogged. See When Printing Becomes Faint or Colors Are Incorrect .


Printing
Printing from a Computer
Printing with the Bundled Application Software
What Is Easy-PhotoPrint EX?
How to Use This Manual
Selecting the Paper and Layout
Changing the Machine Settings
When you display this On-screen Manual in a language environment other than English, some English descriptions may be displayed.
Selecting the Paper and Layout
Selecting the Paper and Layout
Selecting the Paper and Layout
Correcting and Enhancing Photos
Using the Auto Photo Fix Function
Using the Red-Eye Correction Function
Using the Face Brightener Function
Using the Face Sharpener Function
Using the Digital Face Smoothing Function
Using the Blemish Remover Function

How Can I Move (or Copy) the Saved File?
Which Side of the Displayed Image Does the Printing Start from?
How Do I Print with Even Margins?
What Is "C1" or "C4"?
Cropping Photos (Photo Print)
Printing Dates on Photos (Photo Print)
Printing Multiple Photos on One Page
Printing ID Photos (ID Photo Print)
Swapping Positions of Photos
Changing Position, Angle and Size of Photos
Printing Dates on Photos
Attaching Comments to Photos
Adding Text to Photos
Printing with Other Application Software
Printing with Easy Setup
Setting a Page Size and Orientation
Setting the Number of Copies and Printing Order
Setting the Stapling Margin
Saving a Stamp Setting

Saving Image Data to be Used as a Background
Displaying the Print Results before Printing
Setting Paper Dimensions (Custom Size)
Changing the Print Quality and Correcting Image Data
Selecting a Combination of the Print Quality Level and a Halftoning Method
Printing a Color Document in Monochrome
Optimal Photo Printing of Image Data
Adjusting Colors with the Printer Driver
Printing with ICC Profiles
Representing Image Data with a Single Color
Presenting Image Data with Vivid Colors
Changing Color Properties to Improve Coloration
Overview of the Printer Driver
Canon IJ Printer Driver
How to Open the Printer Driver Setup Window
Canon IJ Status Monitor
The Canon IJ Preview
Printing Using the Operation Panel of the Machine
Printing Lined Paper or Graph Paper
Printing Template Forms Such As Lined Paper or Graph Paper
Printing Photographs Directly from a Compliant Device or a Wireless Communication Device
Printing Photographs Directly from a Compliant Device
Printing Photographs Directly from a Compliant Device
About PictBridge Print Settings
Settings on a PictBridge Compliant Device
Settings on the Machine
Printing Photographs from a Wireless Communication Device
Setting the Page Size, Media Type, and Layout When Printing from a Mobile Phone
Displaying the Mobile phone settings screen
Printing via Bluetooth Communication
Printing through Bluetooth Communication
Changing the Bluetooth Settings

Saving Scanned Data on the USB Flash Drive Using the Operation Panel of the Machine
Saving Scanned Data on the USB Flash Drive Using the Operation Panel of the Machine
Saving Scanned Data to PC Using the Operation Panel of the Machine
Saving Scanned Data to PC Using the Operation Panel of the Machine
Selecting a Response to Commands from the Operation Panel Using MP Navigator EX
Scanning with the Bundled Application Software
What Is MP Navigator EX (Supplied Scanner Software)?
Starting MP Navigator EX
Scanning Photos and Documents
Scanning Multiple Documents at One Time
Scanning Multiple Documents at One Time from the ADF (Auto Document Feeder)
Scanning Images Larger than the Platen (Stitch Assist)
Easy Scanning with One-click
Useful MP Navigator EX Functions
Classifying Images into Categories
Utilizing Images in MP Navigator EX
Saving as PDF Files
Setting Passwords for PDF Files
Opening/Editing Password-protected PDF Files
MP Navigator EX Screens
Scan/Import Documents or Images Tab
View & Use Images on your Computer Tab
Custom Scan with One-click Tab
Photos/Documents (Platen) Screen (Scan/Import Window)
Scan Settings Dialog Box (Photos/Documents)
Stack of Documents (ADF) Screen (Scan/Import

Scan Settings Dialog Box (Stack of Documents (ADF))
Save as PDF file Dialog Box
PDF Settings Dialog Box
View & Use Window
Create/Edit PDF file Window
Print Document Dialog Box
Print Photo Dialog Box
Send via E-mail Dialog Box
Save Dialog Box (One-click Mode Screen)
Scan Settings Dialog Box
Exif Settings Dialog Box
Save as PDF file Dialog Box
Scanner Button Settings Tab (Save)
Opening Images Saved on a Computer
Scanning with Other Application Software
What Is ScanGear (Scanner Driver)?
Scanning with Advanced Settings Using ScanGear (Scanner Driver)
Starting ScanGear (Scanner Driver)
Scanning in Basic Mode
Scanning in Advanced Mode
Scanning in Auto Scan Mode
Scanning Multiple Documents from the ADF (Auto Document Feeder) in Advanced Mode
Scanning Multiple Documents at One Time in Advanced Mode
Correcting Images and Adjusting Colors with ScanGear (Scanner Driver)
Correcting Images (Unsharp Mask, Reduce Dust and Scratches, Fading Correction, etc.)
Adjusting Colors Using a Color Pattern
Adjusting Saturation and Color Balance
Adjusting Brightness and Contrast
ScanGear (Scanner Driver) Screens

Auto Scan Mode Tab
Scanning with WIA Driver
Scanning Using the Control Panel (Windows XP Only)
Printing Using the Operation Panel of the Machine
Reducing or Enlarging a Copy
Using Useful Copy Functions
Settings for Special Copy
Copying without Borders (Borderless Copy)
Copying Two Pages to Fit onto a Single Page (2-on-1 Copy)
Copying Four Pages to Fit onto a Single Page (4-on- 1 Copy)
Repeating an Image on a Page (Image Repeat)
Making Multiple Copies of an Entire Document (Collated Copy)
Copying Thick Originals Such as Books (Frame Erase)
Copying on Stickers (Sticker Copy)
Sending/Receiving Faxes Using the Operation Panel of the Machine
Sending a Fax after Speaking on Telephone
Registering Recipients for Speed Dialing
Registering Coded Speed Dial Numbers
Registering Group Dial Numbers

Printing a List of the Registered Destinations
Sending a Fax Using the Speed Dialing Feature
Searching a Registered Dial Code Number by Name (Directory Dialing)
Sending the Same Document to Several Recipients (Sequential Broadcasting)
Resending Faxes (Redialing a Busy Number)
Using the Useful Transmission Functions
Using the Information Services
Transmission/Reception of Faxes Using ECM
Preventing Mistransmission of Faxes
Sending Faxes after Dialing Twice (Fax Number Re- entry)
Sending Faxes after Checking Information (Checking the Recipient's Information)
Changing the Print Settings
Setting the Number of Rings for Fax Calls
Using the Useful Reception Functions
Changing/Deleting the Rejected Number
Using the Caller ID Service to Reject Calls
Document Stored in Memory
Printing a Document in Memory
Deleting a Document in Memory
Summary of Reports and Lists
Sending Faxes from a Computer
Creating an Address Book
Edit or Remove a Recipient from an Address Book
Search for a Recipient in an Address Book
If an Error Occurs
The Machine Cannot Be Powered On
An Error Message Is Displayed on the LCD
A Message for Faxing Is Displayed on the LCD
LCD Cannot Be Seen At All
An Unintended Language Is Displayed on the LCD
Cannot Install the MP Drivers
Cannot Connect to Computer Properly
Printing or Scanning Speed Is Slow / Hi-Speed USB Connection Does Not Work/"This device can perform faster" Message Is Displayed
Print Results Not Satisfactory

Cannot Print to End of Job
No Printing Results/Printing Is Blurred/Colors Are Wrong/ White Streaks
Printed Paper Curls or Has Ink Blots
Paper Is Smudged/Printed Surface Is Scratched
Back of the Paper Is Smudged
Vertical Lines Are Printed on the Sides of the Printout
Colors Are Uneven or Streaked
Printing Does Not Start
Copying/Printing Stops Before It Is Completed
Machine Moves But Ink Is Not Ejected
Printing Speed Is Not as Fast as Expected
FINE Cartridge Holder Does Not Move to the Position for Replacing
Paper Does Not Feed Properly
Document Jams in the ADF
If the Stop button is pressed while the machine is scanning the document:
Removing the jammed document from the Document Tray:
Removing the jammed document from the Document Output Slot:
Message Appears on the Computer Screen
B200 Printer error has occurred. Unplug the power cord and contact the service center. Is Displayed
**** Printer error has occurred. Turn off power then back on again. If problem persists, see the manual. Is Displayed
Writing Error/Output Error/Communication Error
The Inkjet Printer/Scanner/Fax Extended Survey Program Screen Is Displayed
The Inkjet Printer/Scanner/Fax Extended Survey Program Icon Appears
Printer Status Monitor Is Not Displayed
Error Message Appears on a PictBridge Compliant Device
Cannot Print Properly from a Wireless Communication Device
Scanner Does Not Work
ScanGear (Scanner Driver) Does Not Start
Error Message Appears and the ScanGear (Scanner Driver) Screen Does Not Appear
Scan Quality (Image Displayed on the Monitor) Is Poor

Scanned Image Is Surrounded by Extra White Areas
Cannot Scan Properly with Multi Crop
Cannot Scan Properly in Auto Scan Mode
"There is not enough memory." Message Is Displayed
Computer Stops Operating during Scanning
Scanner Does Not Work After Upgrading Windows
E-mail Software Program You Want to Use Does Not Appear in the Screen for Selecting an E-mail Software Program
Scanned Image Is Printed Enlarged (Reduced)
Scanned Image Is Enlarged (Reduced) on the Computer Monitor
Scanned Image Does Not Open
MP Navigator EX Problems
Cannot Scan at the Correct Size
Position or Size of the Image Cannot be Detected Correctly When Scanning Using the Operation Panel
Document Is Placed Correctly, but the Scanned Image Is Slanted
Document Is Placed Correctly, but the Orientation Changes in the Scanned Image
Cannot Receive a Fax, Cannot Print a Fax
Machine Does Not Switch Automatically between Voice and Fax Calls
Quality of Received Fax is Poor
Errors Often Occur When You Receive a Fax
Cannot Send a Fax
Cannot Perform Sequential Broadcasting by Redialing, or Cannot Dial Using the Numeric Buttons
Cannot Send a Fax Clearly
Errors Often Occur When You Send a Fax
Telephone Disconnects During a Call
If You Cannot Resolve the Problem
Instructions for Use (Printer Driver)
General Notes (Scanner Driver)
General Notes (Fax Driver)
Using MP Navigator EX


Advanced Guide > How to Use This Manual
Operating the Contents Pane
Operating the Explanation Window
Using Keywords to Find a Topic
Registering Topics to My Manual
Symbols Used in this Document
Printing This Manual · Trademarks

Advanced Guide > How to Use This Manual > Operating the Contents Pane

When you click a title displayed in the Contents pane found to the left of the On-screen Manual, the pages of that title are displayed in the description window on the right side.
found to the left of
, the titles found in the lower hierarchies are displayed.
to close or display the Contents pane.
When you click · Click

Advanced Guide > How to Use This Manual > Operating the Explanation Window

(1) Click the green characters to jump to the corresponding page.
(2) The cursor jumps to the top of this page.

Advanced Guide > How to Use This Manual > Printing This Manual

to display the Print pane to the left of the On-screen Manual.
to close or display the Print pane.
, and then click Option Settings to display the Option Settings dialog box. You can then set up the printing operation.
Print document title and page number When this check box is checked, the manual name and the page number are printed in the header (top of the document). Print background color and images When this check box is checked, the background color and the image are printed. Some images are printed regardless of whether this check box is checked or not. Check number of pages to be printed before printing When this check box is checked, the Print Page Count Confirmation dialog box is displayed before printing starts. This dialog box allows you to check how many pages will be printed.
To display the Print dialog box, click
and then click Print Settings. When the dialog box is displayed, select the printer to be used for printing. After selecting the printer to be used, click Properties... to specify the print settings.
The following four methods of printing are available:
You can print the currently displayed topic.
The title of the currently displayed topic is displayed in the Documents to Be Printed list.

By selecting Print linked documents, you can also print documents that are linked to the current document. The linked documents are added to the Documents to Be Printed list. Click Print Preview to display and check what the print results will look like before you actually print the document.
The Print Page Count Confirmation dialog box is displayed.
Confirm the number of pages to be printed, and then click Yes.
The topics that are currently displayed are printed.
You can select and print the topics that you want printed.
The titles of all topics are displayed in the Documents to Be Printed list.
From the Documents to Be Printed list, select the title check boxes of the topics to be printed.
When you select the Automatically select documents in lower hierarchies check box, the check boxes of all titles found in the lower hierarchies are selected. Click Select All to select the check boxes of all titles. Click Clear All to clear the check boxes of all titles. Click Print Preview to display and check what the print results will look like before you actually print the document.
The Print Page Count Confirmation dialog box is displayed.
Confirm the number of pages to be printed, and then click Yes.
All topics with selected check boxes are printed.
You can select and print topics registered in My Manual.
For details about My Manual, see " Registering Topics to My Manual ."
The titles of the topics that have been registered to My Manual are displayed in the Documents to Be Printed list.
From the Documents to Be Printed list, select the title check boxes of the topics to be printed.
Click Select All to select the check boxes of all titles. Click Clear All to clear the check boxes of all titles. Click Print Preview to display and check what the print results will look like before you actually print the document.

The Print Page Count Confirmation dialog box is displayed.
Confirm the number of pages to be printed, and then click Yes.
All topics with selected check boxes are printed.
You can print all topics of the On-screen Manual.
The titles of all topics are displayed in the Documents to Be Printed list, and the check boxes are automatically selected.
If you clear the check box of a topic, that topic is not printed. Click Select All to select the check boxes of all titles. Click Clear All to clear the check boxes of all titles. Click Print Preview to display and check what the print results will look like before you actually print the document.
The Print Page Count Confirmation dialog box is displayed.
Confirm the number of pages to be printed, and then click Yes.
All topics are printed.
A large amount of paper is necessary to print all topics. Before printing, be sure to check the number of print pages displayed in the Print Page Count Confirmation dialog box. The Print Preview dialog box allows you to scale the printing to the paper width or to set the zoom rate. However, if the print data extends outside the paper because of the new zoom rate, that portion of the document will not be printed on the paper.

Advanced Guide > How to Use This Manual > Using Keywords to Find a Topic
You can enter a keyword to search for a target page.
All installed On-screen Manuals (user's guides) are searched.

The Search pane is displayed to the left of the On-screen Manual.
to close or display the Search pane.
In Keyword, enter a keyword for the item to be checked.
If you want to enter multiple keywords, insert a space between the keywords.
You can enter up to 10 keywords or up to 255 characters. Uppercase and lowercase are not discriminated. The program can also search for keywords that contain spaces.
The search is started, and the titles of topics containing the keyword are displayed in the search results list.
When you execute a search by entering multiple keywords, the search results are displayed as shown below.
[Documents Containing Perfect Match] Topics containing the entire search character string (including spaces) exactly as entered (perfect match)
[Documents Containing All Keywords] Topics containing all keywords that were entered
[Documents Containing Any Keyword] Topics containing at least one of the keywords that were entered
Click

4. Display the topic that you want to read
From the search results list, double-click (or select and press Enter) the title of the topic you want to read.
When the pages of that title are displayed, the keywords found on those pages are highlighted.

Advanced Guide > How to Use This Manual > Registering Topics to My Manual
Register frequently read pages as My Manual topics so that you can refer to those pages easily at any time.

Display the topic to be added to My Manual.
The My Manual pane is displayed to the left of the On-screen Manual.
to close or display the My Manual pane.
Click Add.
The currently displayed topic is added to List of My Manual.
Alternatively, from the Recently Displayed Documents list, double-click (or select and press Enter) the topic to be added to My Manual to display that topic, and then click Add.
When you double-click (or select and press Enter) a topic displayed in List of My Manual, that topic is displayed in the Description window.
To delete a topic from List of My Manual, select that topic from the list, and then click Delete (or press Delete).
Click

Advanced Guide > How to Use This Manual > Symbols Used in this Document
Indicates operations in Windows.
Indicates operations in Macintosh.

Advanced Guide > How to Use This Manual > Trademarks
Microsoft is a registered trademark of Microsoft Corporation.
Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.
Windows Vista is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.
Macintosh and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.
Adobe, Adobe Photoshop, Adobe RGB and Adobe RGB (1998) are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and or other countries.
Bluetooth is a trademark of Bluetooth SIG, Inc.,U.S.A. and licensed to Canon Inc.
This machine supports Exif Print. Exif Print is a standard for enhancing the communication between digital cameras and printers. By connecting to an Exif Print-compliant digital camera, the camera's image data at the time of shooting is used and optimized, yielding extremely high quality prints.

Advanced Guide > Printing from a Computer
Printing with the Bundled Application Software
Printing with Other Application Software

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software
What Is Easy-PhotoPrint EX?
Correcting and Enhancing Photos


Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > What Is Easy-PhotoPrint EX?
Easy-PhotoPrint EX allows you to create albums, calendars and stickers easily using photos taken with digital cameras.
You can also print borderless photos easily.

Easy-PhotoPrint EX does not support Windows 95, Windows 98, Windows Me, or Windows NT4. Easy-PhotoPrint EX can only be used with Canon inkjet printers. It does not support some printers, including Canon compact printers (SELPHY CP series). If a printer that supports Easy-PhotoPrint EX is not installed, you cannot print items you create. If Easy-PhotoPrint EX is installed on a computer that already has Easy-LayoutPrint installed, Easy- LayoutPrint will be replaced by Easy-PhotoPrint EX.
Printing on paper larger than A4 is available with supported printers only. See your printer manual for details. See Help of Easy-PhotoPrint EX for descriptions of Easy-PhotoPrint EX screens. Click Help in a screen or dialog box, or select Easy-PhotoPrint EX Help from the Help menu. Help appears.
Easy-PhotoPrint EX supports "Exif Print." Exif Print is a standard for enhancing the communication between digital cameras and printers.
By connecting to an Exif Print-compliant digital camera, the image data at the time of shooting is used and optimized, yielding extremely high quality prints.
Easy-PhotoPrint EX can be started from other applications.
See the application's manual for details on the procedure for starting.
The Photo Print function is available with the following applications:

MP Navigator EX Ver.1.00 or later
ZoomBrowser EX Ver.6.0 or later
Digital Photo Professional Ver.3.2 or later
Easy-PhotoPrint EX is subject to the following restrictions when started from Digital Photo Professional: - Menu does not appear in the step button area on the left side of the screen. - Images cannot be corrected/enhanced. - Image display order cannot be changed. - Edited images cannot be saved. - Options other than Enable ICC Profile cannot be selected for Color correction for printing on the Advanced tab of the Preferences dialog box. Therefore, you cannot use the Vivid Photo and Photo Noise Reduction functions.
The Album function is available with the following applications:
MP Navigator EX Ver.1.00 or later
ZoomBrowser EX Ver.5.8 or later
BMP (.bmp)
JPEG (.jpg, .jpeg)
TIFF (.tif, .tiff)
PICT (.pict, .pct)
Easy-PhotoPrint image files (.epp)
When selecting an image, if there is a TIFF file in the selected folder, the image may not be displayed correctly or Easy-PhotoPrint EX may shut down depending on the TIFF format. In such cases, move the TIFF file to another folder or recreate the file in a different file format, and then select the folder again.
The thumbnails of files in unsupported formats are displayed as
(Question Mark). When Easy-PhotoPrint EX is started from Digital Photo Professional, all image files supported by Digital Photo Professional will be displayed.
Easy-PhotoPrint EX Photo Print file (.el6)
Easy-PhotoPrint EX Album file (.el1)
Easy-PhotoPrint EX Stickers file (.el2)
Easy-PhotoPrint EX Calendar file (.el4)
Easy-PhotoPrint EX Layout file (.el5)

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Photos
Easy-PhotoPrint EX allows you to print your favorite photos in a variety of layouts.
You can also create borderless photos easily.
Corrections suitable for photos will be applied automatically when printing.


1. Starting Easy-PhotoPrint EX
2. Selecting a Photo
3. Selecting the Paper
4. Printing
Try This
Correcting and Enhancing Photos
Cropping Photos (Photo Print)
Printing Dates on Photos (Photo Print)
Printing Multiple Photos on One Page
Printing ID Photos (ID Photo Print)
How Can I Move (or Copy) the Saved File?
Which Side of the Displayed Image Does the Printing Start from?
How Do I Print with Even Margins?

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Photos > Starting Easy-PhotoPrint EX
Easy-PhotoPrint EX starts and Menu appears.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Photos > Selecting a Photo
The Select Images screen appears.

The thumbnails (reduced images) displayed in the screen may appear as follows: - A black line appears along an edge of the image. - An edge of the image appears cropped. However, such images will be displayed normally when enlarged or previewed, and print results will not be affected.
The images in the folder will be displayed as thumbnails (miniatures).
If Easy-PhotoPrint EX is started from another application (MP Navigator EX, ZoomBrowser EX or Digital Photo Professional), the folder tree area will not be displayed. The images opened in the application will be displayed as thumbnails.
The number of copies appears as "1" below the clicked image, while the selected image itself will appear in the selected image area.
To delete an image in the selected image area, select the image you want to delete and click
(Delete Imported Image).
To delete all images from the selected image area, click
(Delete All Imported Images).
To print two or more copies of an image, click
(Up arrow) until the number of copies you

want is reached. To reduce the number of copies shown in the box, click
(Down arrow). You can change the order of photos using the list located at the top right corner of the screen. You can select the printing order from Sort by Date and Sort by Name.
You can correct or enhance the selected image before printing.
Correcting and Enhancing Photos See Help for details on the Select Images screen.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Photos > Selecting the Paper
The Select Paper screen appears.

The paper sizes and media types may vary depending on the printer. See Help for details. The paper sources may vary depending on the printer and the media type.
When Fine Art is selected for Paper Size, a 1.38 inch (35 mm) margin is automatically left at the top and bottom of the paper. It is recommended that you check the print range with the image shown in Preview before printing.
You can print photos with more vivid colors or you can reduce the photo noise.
Reducing Photo Noise See Help for details on the Select Paper screen.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Photos > Printing
The Layout/Print screen appears.

The thumbnails (reduced images) displayed in the screen may appear as follows: - A black line appears along an edge of the image. - An edge of the image appears cropped. However, such images will be displayed normally when enlarged or previewed, and print results will not be affected.
Click a borderless layout to print borderless photos.
The layouts that can be selected may vary depending on the printer, paper size, and media type.
When you print on large size paper such as A3/A3+, some computers cannot print properly if you print more than one page or copy at a time. It is recommended that you print page by page when you print on such paper. While printing on paper larger than A4 or printing high-resolution images, data may be printed only to the middle if many images are printed at one time. In such cases, select the Spool print job page by page checkbox in the Preferences dialog box, and then print again.
To display the Preferences dialog box, click
(Settings) or select Preferences... from the File menu. When Fine Art is selected for Paper Size, a 1.38 inch (35 mm) margin is automatically left at the top and bottom of the paper. It is recommended that you check the print range with the image shown in Preview before printing.

The photo print settings will be discarded if you exit Easy-PhotoPrint EX without saving the settings. It is recommended that you save the printed image if you want to print it again.
Saving Photos When you print on a bordered layout, the margins on the left and right or the top and bottom may become wider than the other.
How Do I Print with Even Margins?
You can crop images or print dates on photos.
Cropping Photos (Photo Print)
Printing Dates on Photos (Photo Print) You can correct or enhance the selected image before printing.
Correcting and Enhancing Photos You can specify advanced Photo Print settings (number of copies, print quality, etc.) in the Preferences dialog box.
To display the Preferences dialog box, click
(Settings) or select Preferences... from the File menu. See Help for details on the Layout/Print screen.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Creating an Album
Easy-PhotoPrint EX allows you to create your own personalized photo album.

1. Starting Easy-PhotoPrint EX
2. Selecting the Paper and Layout
3. Selecting a Photo
4. Editing
5. Printing
Try This
Correcting and Enhancing Photos
Swapping Positions of Photos
Changing Position, Angle and Size of Photos
Printing Dates on Photos
Attaching Comments to Photos
Adding Text to Photos
How Can I Move (or Copy) the Saved File?
What Is "C1" or "C4"?

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Creating an Album > Starting Easy-PhotoPrint EX
Easy-PhotoPrint EX starts and Menu appears.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Creating an Album > Selecting the Paper and Layout
The Page Setup screen appears.

See Help on the paper size that can be selected. You can select whether to display images on the inside of the front and back covers in the Cover Options dialog box. To display the Cover Options dialog box, select Front or Front & Back for Cover and click Options Select the Double page album checkbox to enable the spread page layout (consisting of two- page master). In a double-page album, you can arrange an image across the left and right pages. You can customize the page numbers (position, font size, etc.) in the Page Number Settings dialog box. To display the Page Number Settings dialog box, select the Page number checkbox and click Settings You can customize the margins of the front cover, inside pages and back cover in the Margin Settings dialog box. To display the Margin Settings dialog box, click Margins
The Change Layout dialog box appears.
In the Change Layout dialog box, you can change the layout or select whether to print the date (on

which the picture was taken) on the photo.
The layouts that can be selected may vary depending on the Paper Size, Orientation, Double page album, or the type of page selected (front cover, inside pages or back cover). You can customize the date (position, size, color, etc.) in the Date Settings dialog box. To display the Date Settings dialog box, select the Print date checkbox in the Change Layout dialog box and click Date Settings
The Change Background dialog box appears.
In the Change Background dialog box, you can paint the background in a single color or paste an image file to it.
See Help for details on the Page Setup screen.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Creating an Album > Selecting a Photo
The Select Images screen appears.

The images in the folder will be displayed as thumbnails (miniatures).
If Easy-PhotoPrint EX is started from another application (MP Navigator EX or ZoomBrowser EX), the folder tree area will not be displayed. The images opened in the application will be displayed as thumbnails.
To print on the front cover, click
(Import to Front Cover).
To print on the inside pages, click
(Import to Inside Pages).
To print on the back cover, click
(Import to Back Cover).
The selected image(s) are displayed in the selected image area.
You can also select the image(s) you want to print by dragging them into the selected image area.
To delete an image in the selected image area, select the image you want to delete and click
(Delete Imported Image).
To delete all images from the selected image area, click
(Delete All Imported Images).

See Help for details on the Select Images screen.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Creating an Album > Editing
The Edit screen appears.

Swapping Positions of Photos
Changing Position, Angle and Size of Photos
Printing Dates on Photos
Attaching Comments to Photos
Adding Text to Photos
The edit information will be discarded if you exit Easy-PhotoPrint EX without saving the edited album. It is recommended that you save the item if you want to edit it again. The page numbers on the front and back covers of the album are displayed as follows:



See Help for details on the Edit screen.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Creating an Album > Printing
The Print Settings screen appears.

The media types may vary depending on the printer and the paper size. Duplex Printing appears if the selected printer and media type support duplex printing. Select this checkbox to print on both sides of the paper. Automatic appears if you select the Duplex Printing checkbox after selecting a printer that supports automatic duplex printing and media type that supports duplex printing. Select this checkbox to print on both sides of the paper automatically. The paper sources may vary depending on the printer and the media type. You can set a custom print quality level in the Print Quality Settings dialog box. To display the Print Quality Settings dialog box, select Custom for Print Quality and click Quality Settings Select the Borderless Printing checkbox to print borderless photos. You can specify the print range and the amount of extension for borderless printing in the Print Settings dialog box. To display the Print Settings dialog box, click Advanced
See Help for details on the Print Settings screen.


Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Calendars
Easy-PhotoPrint EX allows you to create your own calendar using your favorite photos.

1. Starting Easy-PhotoPrint EX
2. Selecting the Paper and Layout
3. Selecting a Photo
4. Editing
5. Printing
Try This
Correcting and Enhancing Photos
Swapping Positions of Photos
Changing Position, Angle and Size of Photos
Printing Dates on Photos
Adding Text to Photos
How Can I Move (or Copy) the Saved File?

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Calendars > Starting Easy-PhotoPrint EX
Easy-PhotoPrint EX starts and Menu appears.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Calendars > Selecting the Paper and Layout
The Page Setup screen appears.

See Help on the paper size that can be selected. You can add holidays to your calendar.
If necessary, make advanced settings on the calendar and set the background.
You can customize the calendar display (font colors of the dates and days of the week, position and size of the calendar, etc.).
Setting Calendar Display You can paint the background in a single color or paste an image file to it in the Change Background dialog box. To display the Change Background dialog box, click Background
See Help for details on the Page Setup screen.


Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Calendars > Selecting a Photo
The Select Images screen appears.

The images in the folder will be displayed as thumbnails (miniatures).
(Import to Inside Pages).
The selected image(s) are displayed in the selected image area.
You can also select the image(s) you want to print by dragging them into the selected image area.
To delete an image in the selected image area, select the image you want to delete and click
(Delete Imported Image).
To delete all images from the selected image area, click
(Delete All Imported Images).
See Help for details on the Select Images screen.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Calendars > Editing
The Edit screen appears.

Swapping Positions of Photos
Changing Position, Angle and Size of Photos
Printing Dates on Photos
Adding Text to Photos
The edit information will be discarded if you exit Easy-PhotoPrint EX without saving the edited calendar. It is recommended that you save the item if you want to edit it again.
See Help for details on the Edit screen.


Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Calendars > Printing
The Print Settings screen appears.

The media types may vary depending on the printer and the paper size. Duplex Printing appears if the selected printer and media type support duplex printing. Select this checkbox to print on both sides of the paper. Automatic appears if you select the Duplex Printing checkbox after selecting a printer that supports automatic duplex printing and media type that supports duplex printing. Select this checkbox to print on both sides of the paper automatically. The paper sources may vary depending on the printer and the media type. You can set a custom print quality level in the Print Quality Settings dialog box. To display the Print Quality Settings dialog box, select Custom for Print Quality and click Quality Settings You can specify the print range and the amount of extension for borderless printing in the Print Settings dialog box. To display the Print Settings dialog box, click Advanced
See Help for details on the Print Settings screen.


Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Stickers
You can print your favorite photos on compatible sticker sheets.

1. Starting Easy-PhotoPrint EX
2. Selecting the Paper and Layout
3. Selecting a Photo
4. Editing
5. Printing
Try This
Correcting and Enhancing Photos
Swapping Positions of Photos
Changing Position, Angle and Size of Photos
Adding Text to Photos
How Can I Move (or Copy) the Saved File?

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Stickers > Starting Easy-PhotoPrint EX
Easy-PhotoPrint EX starts and Menu appears.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Stickers > Selecting the Paper and Layout
The Page Setup screen appears.

Use the same image in all frames
Paper sizes other than Photo Stickers cannot be selected. Select the Use the same image in all frames checkbox to use the same image in all the frames on the page. You can customize the date (position, size, color, etc.) in the Date Settings dialog box. To display the Date Settings dialog box, select the Print date checkbox and click Date Settings
See Help for details on the Page Setup screen.
Paper Size · Orientation · Print date

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Stickers > Selecting a Photo
The Select Images screen appears.

The images in the folder will be displayed as thumbnails (miniatures).
(Import to Inside Pages).
The selected image(s) are displayed in the selected image area.
You can also select the image(s) you want to print by dragging them into the selected image area.
To delete an image in the selected image area, select the image you want to delete and click
(Delete Imported Image).
To delete all images from the selected image area, click
(Delete All Imported Images).
See Help for details on the Select Images screen.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Stickers > Editing
The Edit screen appears.

Swapping Positions of Photos
Changing Position, Angle and Size of Photos
Printing Dates on Photos
Adding Text to Photos
The edit information will be discarded if you exit Easy-PhotoPrint EX without saving the edited stickers. It is recommended that you save the item if you want to edit it again.
See Help for details on the Edit screen.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Stickers > Printing
The Print Settings screen appears.

The media types may vary depending on the printer and the paper size. The paper sources may vary depending on the printer and the media type. You can set a custom print quality level in the Print Quality Settings dialog box. To display the Print Quality Settings dialog box, select Custom for Print Quality and click Quality Settings You can adjust the printing position in the Adjust Print Position dialog box. To display the Adjust Print Position dialog box, click Print Position You can specify the print range and the amount of extension for borderless printing in the Print Settings dialog box. To display the Print Settings dialog box, click Advanced
See Help for details on the Print Settings screen.


Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Layout
You can add text to your favorite photos and print them in a variety of layouts.

1. Starting Easy-PhotoPrint EX
2. Selecting the Paper and Layout
3. Selecting a Photo
4. Editing
5. Printing
Try This
Correcting and Enhancing Photos
Swapping Positions of Photos
Changing Position, Angle and Size of Photos
Printing Dates on Photos
Adding Text to Photos
How Can I Move (or Copy) the Saved File?

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Layout > Starting Easy-PhotoPrint EX
Easy-PhotoPrint EX starts and Menu appears.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Layout > Selecting the Paper and Layout
The Page Setup screen appears.

See Help on the paper size that can be selected. You can customize the date (position, size, color, etc.) in the Date Settings dialog box. To display the Date Settings dialog box, select the Print date checkbox and click Date Settings
The layouts may vary depending on the Orientation.
See Help for details on the Page Setup screen.
Paper Size · Orientation · Print date

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Layout > Selecting a Photo
The Select Images screen appears.

The images in the folder will be displayed as thumbnails (miniatures).
(Import to Inside Pages).
The selected image(s) are displayed in the selected image area.
You can also select the image(s) you want to print by dragging them into the selected image area.
To delete an image in the selected image area, select the image you want to delete and click
(Delete Imported Image).
To delete all images from the selected image area, click
(Delete All Imported Images).
See Help for details on the Select Images screen.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Layout > Editing
The Edit screen appears.

Swapping Positions of Photos
Changing Position, Angle and Size of Photos
Printing Dates on Photos
Adding Text to Photos
The edit information will be discarded if you exit Easy-PhotoPrint EX without saving the edited layout. It is recommended that you save the item if you want to edit it again.
See Help for details on the Edit screen.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Layout > Printing
The Print Settings screen appears.

The media types may vary depending on the printer and the paper size. Duplex Printing appears if the selected printer and media type support duplex printing. Select this checkbox to print on both sides of the paper. Automatic appears if you select the Duplex Printing checkbox after selecting a printer that supports automatic duplex printing and media type that supports duplex printing. Select this checkbox to print on both sides of the paper automatically. The paper sources may vary depending on the printer and the media type. You can set a custom print quality level in the Print Quality Settings dialog box. To display the Print Quality Settings dialog box, select Custom for Print Quality and click Quality Settings Select the Borderless Printing checkbox to print borderless photos. You can specify the print range and the amount of extension for borderless printing in the Print Settings dialog box. To display the Print Settings dialog box, click Advanced
See Help for details on the Print Settings screen.


Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and Enhancing Photos
You can correct and enhance images.
(Correct/Enhance Images) in the Select Images or Edit screen, or in the Layout/Print screen of Photo Print. You can make the following corrections and enhancements in the Correct/Enhance Images window.
For Photo Print, if you select Enable ICC Profile in the Advanced tab of the Preferences dialog box, you cannot correct/enhance images.
See "Correct/Enhance Images Window" for details on the Correct/Enhance Images window.
This function will automatically analyze the captured scene and apply suitable corrections.
Using the Auto Photo Fix Function
You can correct red eyes caused by a camera flash.
Using the Red-Eye Correction Function
You can brighten dark faces caused by bright background.
Using the Face Brightener Function
You can sharpen out-of-focus faces in a photo.
Using the Face Sharpener Function
You can enhance skin beautifully by removing blemishes and wrinkles.
Using the Digital Face Smoothing Function
You can remove moles.
Using the Blemish Remover Function
You can adjust brightness and contrast or sharpen the entire image.
You can also blur the outline of the subjects or remove the base color.
Click · Adjusting Images

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and Enhancing Photos > Using the Auto Photo Fix Function
Apply optimum corrections automatically to the photos used for an album, calendar, etc.
The Auto Photo Fix function is not available for Photo Print. Photo Print allows you to automatically apply suitable corrections to all photos when printing, by selecting Auto Photo Fix in Color correction for printing on the Advanced tab of the Preferences dialog box. To display the Preferences dialog
(Settings) in the Layout/Print screen or select Preferences... from the File menu. Once image is corrected with Auto Photo Fix and saved, it cannot be corrected again with Auto Photo Fix. Also, Auto Photo Fix may not be available for images edited using an application, digital camera, etc. manufactured by other companies.
(Correct/Enhance Images).
The Correct/Enhance Images window appears.

You can also display the Correct/Enhance Images window by clicking
(Correct/Enhance Images) in the Layout/Print or Edit screen. In that case, only the image displayed in Preview can be corrected/enhanced. See "Correct/Enhance Images Window" for details on the Correct/Enhance Images window.
The image appears in Preview.
If only one image is selected, the thumbnail does not appear below Preview.
box, click

The entire photo is corrected automatically and the
(Correction/Enhancement) mark appears on the upper left of the image.
(Compare) to display the images before and after the correction side by side so that you can compare and check the result. Click Reset Selected Image to undo the correction operation. If you want to apply the correction to all the selected images at once, select the Apply to all images checkbox.
You can save corrected images as new files.
To save only the image you like, click Save Selected Image. To save all images, click Save All Corrected Images. Only JPEG/Exif file format is available for corrected images.
The corrections will be lost if you exit before saving corrected images.
Click

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and Enhancing Photos > Using the Red-Eye Correction Function
You can correct red eyes caused by a camera flash.
You can perform the Red-Eye Correction function either automatically or manually.
Photo Print allows you to automatically correct red eyes when printing. To correct automatically, select Enable Auto Photo Fix in Color correction for printing on the Advanced tab of the Preferences dialog box and select the Enable Red-Eye Correction checkbox.
(Correct/Enhance Images).
The Correct/Enhance Images window appears.

You can also display the Correct/Enhance Images window by clicking
(Correct/Enhance Images) in the Layout/Print or Edit screen. In that case, only the image displayed in Preview can be corrected/enhanced. See "Correct/Enhance Images Window" for details on the Correct/Enhance Images window.
The image appears in Preview.
If only one image is selected, the thumbnail does not appear below Preview.

Red eyes are corrected and the
(Correction/Enhancement) mark appears on the upper left of the image.
Areas other than the eyes may be corrected depending on the image.
(Compare) to display the images before and after the correction side by side so that you can compare and check the result. Click Reset Selected Image to undo the correction operation. If you want to apply the correction to all the selected images at once, select the Apply to all images checkbox.
Move the cursor over the image. The shape of the cursor changes to
(Paintbrush).


Red eye is corrected and the
(Correction/Enhancement) mark appears on the upper left of the image.
Effect levels can be changed using the slider below Red-Eye Correction. Click Undo to undo the preceding correction operation.
Click

You can save corrected images as new files.
To save only the image you like, click Save Selected Image. To save all images, click Save All Corrected Images. Only JPEG/Exif file format is available for corrected images.
The corrections will be lost if you exit before saving corrected images.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and Enhancing Photos > Using the Face Brightener Function
You can brighten dark faces caused by bright background.
(Correct/Enhance Images).
The Correct/Enhance Images window appears.

You can also display the Correct/Enhance Images window by clicking
(Correct/Enhance Images) in the Layout/Print or Edit screen. In that case, only the image displayed in Preview can be corrected/enhanced. See "Correct/Enhance Images Window" for details on the Correct/Enhance Images window.
The image appears in Preview.
If only one image is selected, the thumbnail does not appear below Preview.
Move the cursor over the image. The shape of the cursor changes to
(Cross).



The entire image is corrected so that the selected area containing the face becomes brighter, and
(Correction/Enhancement) mark appears on the upper left of the image.
You can also drag to rotate the selected area. Effect levels can be changed using the slider below Face Brightener. Click Undo to undo the preceding correction operation.
You can save corrected images as new files.
To save only the image you like, click Save Selected Image. To save all images, click Save All Corrected Images. Only JPEG/Exif file format is available for corrected images.
The corrections will be lost if you exit before saving corrected images.
the

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and Enhancing Photos > Using the Face Sharpener Function
You can sharpen out-of-focus faces in a photo.
You can perform the Face Sharpener function either automatically or manually.
(Correct/Enhance Images).
The Correct/Enhance Images window appears.

You can also display the Correct/Enhance Images window by clicking
(Correct/Enhance Images) in the Layout/Print or Edit screen. In that case, only the image displayed in Preview can be corrected/enhanced. See "Correct/Enhance Images Window" for details on the Correct/Enhance Images window.
The image appears in Preview.
If only one image is selected, the thumbnail does not appear below Preview.

The face is sharpened and the
(Correction/Enhancement) mark appears on the upper left of the image.
Effect levels can be changed using the slider below Face Sharpener.
(Compare) to display the images before and after the correction side by side so that you can compare and check the result. Click Reset Selected Image to undo the correction operation. If you want to apply the correction to all the selected images at once, select the Apply to all images checkbox.
Move the cursor over the image. The shape of the cursor changes to
(Cross).


The facial area in and around the selected area is sharpened and the
(Correction/ Enhancement) mark appears on the upper left of the image.
You can also drag to rotate the selected area. Effect levels can be changed using the slider below Face Sharpener. Click Undo to undo the preceding correction operation.
You can save corrected images as new files.
Click

To save only the image you like, click Save Selected Image. To save all images, click Save All Corrected Images. Only JPEG/Exif file format is available for corrected images.
The corrections will be lost if you exit before saving corrected images.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and Enhancing Photos > Using the Digital Face Smoothing Function
You can enhance skin beautifully by removing blemishes and wrinkles.
You can perform the Digital Face Smoothing function either automatically or manually.
(Correct/Enhance Images).
The Correct/Enhance Images window appears.

You can also display the Correct/Enhance Images window by clicking
(Correct/Enhance Images) in the Layout/Print or Edit screen. In that case, only the image displayed in Preview can be corrected/enhanced. See "Correct/Enhance Images Window" for details on the Correct/Enhance Images window.
The image appears in Preview.
If only one image is selected, the thumbnail does not appear below Preview.

Skin is enhanced beautifully and the
(Correction/Enhancement) mark appears on the upper left of the image.
Effect levels can be changed using the slider below Digital Face Smoothing.
(Compare) to display the images before and after the enhancement side by side so that you can compare and check the result. Click Reset Selected Image to undo the enhancement operation. If you want to apply the enhancement to all the selected images at once, select the Apply to all images checkbox.
Move the cursor over the image. The shape of the cursor changes to
(Cross).


Skin in and around the selected area is enhanced beautifully and the
(Correction/Enhancement) mark appears on the upper left of the image.
You can also drag to rotate the selected area. Effect levels can be changed using the slider below Digital Face Smoothing. Click Undo to undo the preceding enhancement operation.
You can save enhanced images as new files.
Click

To save only the image you like, click Save Selected Image. To save all images, click Save All Corrected Images. Only JPEG/Exif file format is available for enhanced images.
The enhancements will be lost if you exit before saving enhanced images.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and Enhancing Photos > Using the Blemish Remover Function
You can remove moles.
(Correct/Enhance Images).
The Correct/Enhance Images window appears.

You can also display the Correct/Enhance Images window by clicking
(Correct/Enhance Images) in the Layout/Print or Edit screen. In that case, only the image displayed in Preview can be corrected/enhanced. See "Correct/Enhance Images Window" for details on the Correct/Enhance Images window.
The image appears in Preview.
If only one image is selected, the thumbnail does not appear below Preview.
Move the cursor over the image. The shape of the cursor changes to
(Cross).



Moles in and around the selected area are removed and the
(Correction/Enhancement) mark appears on the upper left of the image.
Click Undo to undo the preceding enhancement operation.
You can save enhanced images as new files.
To save only the image you like, click Save Selected Image. To save all images, click Save All Corrected Images. Only JPEG/Exif file format is available for enhanced images.
The enhancements will be lost if you exit before saving enhanced images.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and Enhancing Photos > Adjusting Images
You can make fine adjustments to the overall brightness, contrast, etc. of images.
(Correct/Enhance Images).
The Correct/Enhance Images window appears.

You can also display the Correct/Enhance Images window by clicking
(Correct/Enhance Images) in the Layout/Print or Edit screen. In that case, only the image displayed in Preview can be corrected/enhanced. See "Correct/Enhance Images Window" for details on the Correct/Enhance Images window.
The image appears in Preview.
If only one image is selected, the thumbnail does not appear below Preview.
The following adjustments are available:


Click Defaults to reset all adjustments.
You can save adjusted images as new files.
To save only the image you like, click Save Selected Image. To save all images, click Save All Corrected Images. Only JPEG/Exif file format is available for adjusted images.
The adjustments will be lost if you exit before saving adjusted images.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and Enhancing Photos > Correct/Enhance Images Window
You can correct/enhance images in this window.
To display the Correct/Enhance Images window, click
(Correct/Enhance Images) in the Select Images or Edit screen, or in the Layout/Print screen of Photo Print.

Toolbar
Displays the enlarged or reduced preview of the page.
Displays the entire image in Preview.
Displays the Compare Images window. You can compare the images before and after the correction/ enhancement side by side. The image before the correction/enhancement is displayed on the left, and the image after the correction/enhancement is displayed on the right.
(Zoom In/Zoom Out) · (Full Screen) · (Compare)


Available tasks and settings may vary between the Auto and Manual tabs.
Click Auto or Manual to display the corresponding tab.
Select to correct automatically.

Applies automatic corrections suitable for photos.
The Auto Photo Fix function is not available for Photo Print. Photo Print allows you to automatically apply suitable corrections to all photos when printing. Select this option in Color correction for printing on the Advanced tab of the Preferences dialog box. To display the
Preferences dialog box, click
(Settings) in the Layout/Print screen or select Preferences... from the File menu.
Corrects red eyes.
For Photo Print, you can also correct red eyes by selecting Enable Auto Photo Fix in Color correction for printing on the Advanced tab of the Preferences dialog box and selecting the
Auto Photo Fix · Red-Eye Correction

Enable Red-Eye Correction checkbox.
Sharpens out-of-focus faces. You can adjust the effect level using the slider.
Enhances skin beautifully by removing blemishes and wrinkles. You can adjust the effect level using the slider.
Apply to all images
Automatically corrects all the images displayed in the list.
Applies the selected effect to the selected image or all images.
Cancels all corrections and enhancements applied to the selected image.
Saves the selected image in the list that applied corrections and enhancements.
Save All Corrected Images
Saves all the images that applied corrections and enhancements displayed in the list.
Click to close the Correct/Enhance Images window.
Select to correct manually.
Use Adjust to adjust brightness and contrast, or to sharpen the entire image.
Use Correct/Enhance to correct/enhance specific areas.

Adjusts the overall image brightness. Move the slider to the left to darken and right to brighten the image.
Adjusts the contrast of the image. Adjust the contrast when the image is flat due to lack of contrast. Move the slider to the left to decrease and right to increase the contrast of the image.
Emphasizes the outline of the subjects to sharpen the image. Adjust the sharpness when the photo is out of focus or text is blurred.

Move the slider to the right to sharpen the image.
Blurs the outline of the subjects to soften the image. Move the slider to the right to soften the image.
Removes show-through of text from the reverse side or removes the base color. Adjust the show- through level to prevent text on the reverse side of thin document or the base color of the document from appearing on the image. Move the slider to the right to increase the show-through removal effect.
Resets each adjustment (brightness, contrast, sharpness, blur, and show-through removal).
Cancels all adjustments applied to the selected image.
Saves the selected image in the list that applied adjustments.
Save All Corrected Images
Saves all the images that applied adjustments displayed in the list.
Click to close the Correct/Enhance Images window.

Corrects red eyes. You can specify the area you want to apply the effect to. You can adjust the effect level using the slider.
For Photo Print, red eyes are automatically corrected when Enable Auto Photo Fix is selected in Color correction for printing on the Advanced tab of the Preferences dialog box and the Enable Red-Eye Correction checkbox is selected. To disable the automatic correction, deselect the checkbox.
Corrects the entire image so that the selected facial area is brightened. You can adjust the effect level using the slider.
Sharpens out-of-focus faces. You can specify the area you want to apply the effect to. You can adjust the effect level using the

slider.
Enhances skin beautifully by removing blemishes and wrinkles. You can specify the area you want to apply the effect to. You can adjust the effect level using the slider.
Removes moles. You can specify the area you want to apply the effect to.
Applies the selected effect to the specified area.
Cancels the latest correction/enhancement.
Cancels all corrections and enhancements applied to the selected image.
Saves the selected image in the list that applied corrections and enhancements.
Save All Corrected Images
Saves all the images that applied corrections and enhancements displayed in the list.
Click to close the Correct/Enhance Images window.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Questions and Answers
How Can I Move (or Copy) the Saved File?
Which Side of the Displayed Image Does the Printing Start from?
How Do I Print with Even Margins?
What Is "C1" or "C4"?

Page 210 of 817 pages How Can I Move (or Copy) the Saved File?
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Questions and Answers > How Can I Move (or Copy) the Saved File?
If you want to move (or copy) a file created and saved with Easy-PhotoPrint EX from one folder to another, you need to move (or copy) the folder that was automatically created when originally saving that file as well.
For example, when you save a file named "MyAlbum.el1," a folder named "MyAlbum.el1.Data" is automatically created in the same folder that contains the "MyAlbum.el1" file. If you want to move (or copy) the "MyAlbum.el1" file to another folder, move (or copy) the "MyAlbum.el1.Data" folder as well. The "MyAlbum.el1.Data" folder contains the photos used in the album.
The icons may vary depending on the items.
Do not change the Data folder name; otherwise you will not be able to display the photos you edited with Easy-PhotoPrint EX.

Page 211 of 817 pages Which Side of the Displayed Image Does the Printing Start from?
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Questions and Answers > Which Side of the Displayed Image Does the Printing Start from?
As shown below, printing starts from the left side of the image displayed in the Layout/Print screen.

Outputs the paper in the direction as the arrow indicates.
See your printer manual for details on how to load paper (to print on the front/back, etc.).

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Questions and Answers > How Do I Print with Even Margins?
When you print on a bordered layout, the margins on the left and right or the top and bottom may become wider than the other, depending on the image and printer.
To always print with even margins, select the Always crop images when selecting a layout with margins checkbox on the Advanced tab of the Preferences dialog box.
To display the Preferences dialog box, click
(Settings) in the Layout/Print screen or select Preferences... from the File menu.
Crop the photo to apply even margins individually.
Cropping Photos (Photo Print)
This setting is available for Photo Print only.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Questions and Answers > What Is "C1" or "C4"?
When an album is printed, labels such as "C1" and "C4" are printed as page numbers.
The "C1" and "C4" represent the front cover and back cover, respectively.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Photo Print Settings
Cropping Photos (Photo Print)
Printing Dates on Photos (Photo Print)
Printing Multiple Photos on One Page
Printing ID Photos (ID Photo Print)

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Photo Print Settings > Printing Vivid Photos
Select the Vivid Photo checkbox in the Select Paper screen to boost the colors in a photo before printing.

This function is available only with a printer that supports Vivid Photo. This function is not available when Enable ICC Profile is selected on the Advanced tab of the Preferences dialog box.
Even if you select the Vivid Photo checkbox, this effect applies only to the print result. The original image or preview image will not be affected.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Photo Print Settings > Reducing Photo Noise
When a photo is taken in a dark location such as night scene using digital camera, noise may appear in the image.
Select the Photo Noise Reduction checkbox in the Select Paper screen to reduce noise in the image and make the printed photos more vivid.

This function is not available when Enable ICC Profile is selected on the Advanced tab of the Preferences dialog box.
When the noise is severe, change Normal to Strong. The noise reduction effect applies only to the print result. The original image or preview image will not be affected.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Photo Print Settings > Cropping Photos (Photo Print)
Cropping a photo is the act of removing the unnecessary portions of the photo by selecting the necessary portions.
(Crop Image) in the Layout/Print screen or double-click the preview image.
Move the white frame to the portion to print and click OK.

To move the cropping area, place the cursor within the white frame and drag it. Drag the white lines to enlarge/reduce the cropping area. Select the The Rule of Thirds checkbox to display white broken lines. To create a balanced composition, drag any of the intersecting points (white squares) or white broken lines over the main subject of the photo.

The cropping effect applies only to the print result. The original image will not be cropped. See Help for details on the Crop window.
Click


Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Photo Print Settings > Printing Dates on Photos (Photo Print)
To print the date the photo was taken on the photo, click
(Date Settings) in the Layout/Print screen, then select the Print date checkbox in the Date Settings dialog box.

The date is displayed in the short date format (mm/dd/yyyy, etc.) specified in your operating system. See Help for details on setting dates.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Photo Print Settings > Printing Multiple Photos on One Page
You can print multiple photos on one page by selecting a multiple-photo layout in the Layout/Print screen.

See the following section for details on how to select photos.
Selecting a Photo The available number of photos and layout may vary depending on the media type. Photos are arranged in the following order. Example: Borderless (x4)

You can change the printing order in Printing Order on the Print tab of the Preferences dialog box. You can select the printing order from By Date, By Name and By Selection.
To display the Preferences dialog box, click
(Settings) or select Preferences... from the File menu.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Photo Print Settings > Printing an Index
You can print an index of selected photos. An index print shows the thumbnails of the photos in one page. It is convenient for managing your photos.
To print an index, select Index from the layouts in the Layout/Print screen.

Index print will be disabled if you select any of the following paper sizes. - Credit Card - Fine Art A4 - Fine Art A3 - Fine Art A3+ - Fine Art Letter You can print up to 80 images on one page.
See the following section for details on how to select photos.
Selecting a Photo Photos are arranged in the following order. Example: Index (x20)


You can change the printing order in Printing Order on the Print tab of the Preferences dialog box. You can select the printing order from By Date, By Name, and By Selection.
To display the Preferences dialog box, click
(Settings) or select Preferences... from the File menu.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Photo Print Settings > Printing ID Photos (ID Photo Print)
You can print a variety of ID photos.
The photo may not qualify as an official ID photo depending on its use. For details, contact the party to whom you will be submitting the photo.
To print ID photos, select 4"x6" 10x15cm for Paper Size in the Select Paper screen, and select a layout of the ID photo from the layouts in the Layout/Print screen.

See the following section for details on how to select photos.
Selecting a Photo Photos are arranged in the following order. Example: ID Photo 3.5x4.5cm

You can change the printing order in Printing Order on the Print tab of the Preferences dialog box. You can select the printing order from By Date, By Name, and By Selection.
To display the Preferences dialog box, click
(Settings) or select Preferences... from the File menu.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Photo Print Settings > Printing Photo Information
Select Captured Info from the layouts in the Layout/Print screen to print the photo and the Exif information side by side.

See the following section for details on how to select photos.
Selecting a Photo This function is available only on paper sizes Letter 8.5"x11" and A4.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Photo Print Settings > Saving Photos
You can save edited photos. The information of cropping and layout can be saved.
Click Save in the Layout/Print screen.

When the Save As dialog box appears, specify the save location and file name, then click Save.
If you edit a saved file and save it again, the file will be overwritten. To save a file again with a new name or to a different location, select Save As... from the File menu and save.
Save will not be displayed in the Select Images or Select Paper screen.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Photo Print Settings > Opening Saved Files
You can open files created with Easy-PhotoPrint EX.

The Open dialog box appears. You can check files created and saved with Easy-PhotoPrint EX by icon view (only for Windows Vista) or thumbnail view.
When using 64bit Edition of Windows Vista or Windows XP, the contents of files cannot be displayed on Explorer.
The Layout/Print screen appears.
Easy-PhotoPrint EX supports the following file format (extension). - Easy-PhotoPrint EX Photo Print file (.el6)
You can open files created with Easy-PhotoPrint EX with the following methods, besides from Library in Menu. - Double-click or click the file. - From the File menu, click Open..., then select the file you want to edit. You can also open a recently used file by clicking the file name shown in the File menu.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Other Settings
Swapping Positions of Photos
Changing Position, Angle and Size of Photos
Printing Dates on Photos
Attaching Comments to Photos
Adding Text to Photos

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Other Settings > Changing Layout
You can change the layout of each page separately.
Select the page you want to change the layout of in the Edit screen, then click
(Change Layout).
Select the layout you want to use in the Change Layout dialog box and click OK.


If the new layout has a different number of frames per page from the current layout, the following will happen:
If the number of layout frames is increased
: Images will move from the subsequent pages to fill all the frames
in the new layout.
: Pages with the new layout will be added until all the images on the
If the number of layout frames is decreased
pages with the current layout can be fitted.
If you change the current layout for the front or back cover to one that has fewer layout frames, any image that does not fit in the new layout will be deleted, starting with the last image that was added to the former layout page.
The layouts that can be selected may vary depending on the Paper Size, Orientation, or the type of page selected (front cover, inside pages or back cover). Select the Apply to all pages checkbox to change the layouts of all pages to the one you newly selected.


The layouts of all pages are changed to the selected layout. All images that do not fit in the new layout will be collected on the last page.
The layouts that can be selected may vary depending on the Paper Size and Orientation.

If the new layout has a different number of frames per page from the current layout, the following will happen:
If the number of layout frames is increased
: Images will move from the subsequent pages to fill all the frames
in the new layout.
: Pages with the new layout will be added until all the images on the
If the number of layout frames is decreased
pages with the current layout can be fitted.
The layouts that can be selected may vary depending on the Paper Size and Orientation. Select the Apply to all pages checkbox to change the layouts of all pages to the one you newly selected.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Other Settings > Changing Background
You can change the background of each page.
You cannot change the background of the Photo Print, Stickers, and Layout Print.
Click Background... in the Page Setup screen or select the page you want to change the background of in
the Edit screen, then click
(Change Background).
The screens for Album printing are used as examples in the following descriptions. The screens may vary depending on what you create.


Select the type of background you want to use in the Change Background dialog box.
Select the image you want to use from Samples and click OK.
Select from samples will be displayed only if Album has been selected.
Select the color you want to use from Standard color or Custom color and click OK.


Set Image File Path and Image Layout, then click OK.


See Help for details on how to set the background in the Change Background dialog box.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Other Settings > Adding Photos
You can add images to pages.
Select the page you want to add photos in the Edit screen, then click
(Add Image).
The screens for Album printing are used as examples in the following descriptions. The screens may vary depending on what you create.


Select the folder containing the image you want to add from the folder tree area on the left of the Add Image dialog box, and select the image you want to add from the thumbnail window on the right.
Click an image to select it (background turns blue) or deselect it (background turns white). You can also select multiple images.
Select an option for Add to and click OK.
You can add up to 20 images at one time to a single page. Up to 99 of the same images can be added to all pages combined. You cannot add two or more of the same image at one time. Add it one at a time. When the number of pages increases due to added images, you cannot add images beyond page 400.
In the Add Image dialog box, you can select all images at one time or change the display size and order of the thumbnails. See Help for details.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Other Settings > Swapping Positions of Photos
You can swap the positions of images.
(Swap Image Positions) in the Edit screen.
The screens for Album printing are used as examples in the following descriptions. The screens may vary depending on what you create.


Select the target and source images you want to swap, then click Swap.
When you finish swapping all images you want to swap, click Back to Edit.
Click

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Other Settings > Replacing Photos
You can replace an image with another image.
Select the image you want to replace in the Edit screen, then click
(Replace Selected Image).


Select the folder containing the image you want to replace with from the folder tree area on the left of the Replace Image dialog box.
Select the image you want to replace with from the thumbnail window on the right of the screen and click OK.
If you want to select from the images already imported, click the Imported Images tab and select the image you want to replace with from the thumbnail window and click OK.
You cannot select multiple images in the Replace Image dialog box.
If you select multiple images in the Edit screen and use the replacement function, all the images selected in the Edit screen will be replaced with the image selected in the Replace Image dialog box. When images are replaced, the following settings of the old image are inherited to the new image. - Position - Size - Frame - Position and size of the date The cropping information and image orientation are not inherited. In the Replace Image dialog box, you can change the display size and order of the thumbnails. See Help for details.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Other Settings > Changing Position, Angle and Size of Photos
You can adjust the position, angle and size of images.
Select the image of which you want to change the position or size in the Edit screen and click
(Edit Image) or double-click the image.

Set the Center Position, Rotation and Size, then click OK.
You can also change the position and size of an image by dragging it in the Edit screen.
Select an image in the Edit screen, then click
(Free Rotate) and drag a corner of the image to rotate it. See Help for details on the position and size of images.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Other Settings > Cropping Photos
Cropping an image is the act of removing the unnecessary portions of the image by selecting the necessary portions.
Select the image you want to crop in the Edit screen and click
(Edit Image) or double-click the image.
Click the Crop tab in the Edit Image dialog box.

Drag the white squares on the image to change the area to be cropped and click OK.
See Help for details on cropping.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Other Settings > Framing Photos
You can add frames to images.
You cannot add frames to images in Photo Print, Stickers, and Layout Print.
Select the image you want to frame in the Edit screen and click
(Edit Image) or double-click the image.
Click the Frame tab in the Edit Image dialog box.

Select the frame you want to use from Frames and click OK.
You cannot print dates on framed photos.
Select the Apply to all images in the page checkbox to add the same frame to all the images on a selected page at one time. See Help for details on frames.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Other Settings > Printing Dates on Photos
You can print dates on images.
Select the image you want to print the date in the Edit screen and click
(Edit Image) or double-click the image.
Click the Date tab in the Edit Image dialog box.

Select the Show date checkbox.
Set the Text Orientation, Position, Font Size and Color, then click OK.
You cannot print dates on framed images.
The date is displayed in the short date format (mm/dd/yyyy, etc.) specified in your operating system. See Help for details on setting dates.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Other Settings > Attaching Comments to Photos
You can attach comments to images and display them in your album. The photo name, shooting date and comments are displayed (from top to bottom) in a comment box.

You cannot attach comments to Photo Print, Calendar, Stickers, and Layout Print.
Select the image you want to attach comments to in the Edit screen and click
(Edit Image) or double-click the image.
Click the Comments tab in the Edit Image dialog box.

Select the Show comment box checkbox.
Select the checkboxes of the items you want to display, and enter comments.
Set the size and color of font, and position of the comments, etc., then click OK.

See Help for details on comments.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Other Settings > Adding Text to Photos
You can add text to photos.
(Add Text) in the Edit screen and drag the mouse over the area in which you want to add text.
The screens for Album printing are used as examples in the following descriptions. The screens may vary depending on what you create.


Select the Text tab in the Edit Text Box dialog box and enter text.
In the Edit Text Box dialog box, you can change the position, angle and size of the text. You can also set the color and line of the text box. See Help for details.
To change the entered text, select it and click
(Edit Text Box). The Edit Text Box dialog box appears. You can change the text.
Click

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Other Settings > Saving
You can save edited items.
Click Save in the Edit or Print Settings screen.
The screens for Album printing are used as examples in the following descriptions. The screens may vary depending on what you create.

When the Save As dialog box appears, specify the save location and file name, then click Save.
If you edit a saved file and save it again, the file will be overwritten. To save a file again with a new name or to a different location, select Save As... from the File menu and save.
Save will not be displayed in the Page Setup or Select Images screen.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Other Settings > Setting Holidays
You can add holidays to your calendar.
Click Set Holidays... in the Page Setup screen of Calendar, or click
(Setup Period/Holiday) in the Edit screen and click Set Holidays... in the Calendar General Settings dialog box to display the Holiday Settings dialog box.

To add a holiday, click Add The Add/Edit Holiday dialog box appears. To edit a saved holiday, select it and click Edit
To delete a holiday, select it and click Delete. To delete all the saved holidays within your calendar period, click Clear.

Enter the name in Holiday Name and specify the date.

Select the Set as Holiday checkbox to display that day as a holiday in your calendar.
See Help for details on each dialog box.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Other Settings > Setting Calendar Display
You can customize the calendar display (fonts, lines, colors, position, size, etc.).
Click Settings... in the Page Setup screen of Calendar, or select a calendar in the Edit screen and click
(Setup Calendar) to display the Calendar Settings dialog box.
The Position & Size tab is displayed only when the Calendar Settings dialog box is displayed from the Edit screen.

See Help for details on the Calendar Settings dialog box.

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Other Settings > Opening Saved Files
You can open files created with Easy-PhotoPrint EX.
The Open dialog box appears. You can check files created and saved with Easy-PhotoPrint EX by icon view (only for Windows Vista) or thumbnail view.
When using 64bit Edition of Windows Vista or Windows XP, the contents of files cannot be displayed on Explorer.
The Edit screen appears.
Easy-PhotoPrint EX supports the following file formats (extensions). - Easy-PhotoPrint EX Album file (.el1) - Easy-PhotoPrint EX Stickers file (.el2) - Easy-PhotoPrint EX Calendar file (.el4) - Easy-PhotoPrint EX Layout file (.el5)
See the following sections for details on the editing procedures.

You can open files created with Easy-PhotoPrint EX with the following methods, besides from Library in Menu. - Double-click or click the file. - From the File menu, click Open..., then select the file you want to edit. You can also open a recently used file by clicking the file name shown in the File menu.

Advanced Guide > Printing from a Computer > Printing with Other Application Software
Changing the Print Quality and Correcting Image Data
Overview of the Printer Driver
Various Printing Methods


Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods
Printing with Easy Setup
Setting a Page Size and Orientation
Setting the Number of Copies and Printing Order
Setting the Stapling Margin
Saving a Stamp Setting
Saving Image Data to be Used as a Background
Displaying the Print Results before Printing
Setting Paper Dimensions (Custom Size)

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Printing with Easy Setup
A simple procedure that is necessary for printing data properly with this machine, is as follows:
2. Select a frequently used profile
In Commonly Used Settings, select a printing profile suited for the purpose. When you select a printing profile, the Additional Features, Media Type, and Printer Paper Size settings are automatically switched to the values that were preset.

Select High, Standard, or Fast for Print Quality.
Click OK. When you execute print, the document is printed with settings suited for the purpose.
If you check the Always Print with Current Settings check box, all settings on the Quick Setup, Main, Page Setup, and Effects tabs are saved, and you can print with the same settings from the next time as well. Click Save... to register the specified settings. For instructions on registering settings, see "
Registering a Frequently Used Printing Profile ."

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Setting a Page Size and Orientation
The paper size and orientation are essentially determined by the application. If the page size and orientation set for Page Size and Orientation on the Page Setup tab are same as those set with the application, you do not need to select them on the Page Setup tab.
If you are not able to specify them with the application, the procedure for selecting a page size and orientation is as follows: You can also set Page Size and Orientation on the Quick Setup tab.
2. Select the paper size
Select a page size from the Page Size list on the Page Setup tab.

Select Portrait or Landscape for Orientation. Check Rotate 180 degrees check box if you want to perform printing with the original being rotated 180 degrees.
Click OK. The document will be printed with the selected page size and the orientation.

Page 252 of 817 pages Setting the Number of Copies and Printing Order
Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Setting the Number of Copies and Printing Order
Default Setting Print from Last Page



Collate Print from Last Page + Collate



The procedure for specifying the number of copies and printing order is as follows: You can also set the number of copies on the Quick Setup tab.
2. Specify the number of copies to be printed
For Copies on the Page Setup tab, specify the number of copies to be printed.

Check the Print from Last Page check box if you want to print from the last page in order. If you do this, you do not need to sort pages into their correct order after printing.
Check the Collate check box if you are specifying multiple copy together. Uncheck this check box to print all pages with the same page number together.

Page 253 of 817 pages Setting the Number of Copies and Printing Order
Click OK. The specified number of copies will be printed with the specified printing order.
If the application software that you used to create the document has the same function, give priority to the printer driver settings. However, if the print results are not acceptable, specify the function settings on the application software. If you specify the number of copies and the printing order with both the application and this printer driver, the number of copies may be multiplied numbers of the two settings or the specified printing order may not be enabled. Print from Last Page and Collate appear grayed out and are unavailable if Booklet is selected for Page Layout. Print from Last Page appears grayed out and is unavailable if Poster is selected for Page Layout.
By setting both Print from Last Page and Collate, you can perform printing so that papers are collated one by one starting from the last page. These settings can be used in combination with Borderless, Normal-size, Fit-to-Page, Scaled, Page Layout, and Duplex Printing.

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Setting the Stapling Margin

The procedure for setting the stapling direction and the width of the stapling margin is as follows:
2. Specify the side to be stapled
Check the position of the stapling margin from Staple Side on the Page Setup tab. The printer analyzes the Orientation and Page Layout settings, and automatically selects the best staple position. If you want to change the setting, select from the list.

If necessary, click Specify Margin... and set the width of the stapling margin, and then click OK.

Click OK on the Page Setup tab. When you execute print, the data is printed with the specified staple side and margin.

Staple Side and Specify Margin... appear grayed out and are unavailable when:
Poster or Booklet is selected for Page Layout. Scaled is selected for Page Layout (If Duplex Printing is also selected, only Staple Side is selectable). Borderless is selected for Page Layout.

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Borderless Printing
The borderless printing function allows you to print data without any margin by enlarging the data so that it extends slightly off the paper. Without the borderless printing function, a margin is provided around the printed data. If you want to print data such as a photo without providing any margin around it, select Borderless Printing.

The procedure for performing borderless printing is as follows:
1. Open the printer driver setup window
2. Set borderless printing
Select Borderless from the Page Layout list on the Page Setup tab.

Click OK when the confirmation message appears. When a message prompting you to change the media type appears, select a media type from the list and click OK.
Check the Page Size list. If you want to change, select another page size from the list. The list displays only sizes that can be used for borderless printing.
Adjust the amount of extension using the Amount of Extension slider as necessary.

Moving the slider to the right makes the amount larger and moving the slider to the left makes the amount smaller. It is recommended to set the slider at the second position from the right for most cases.

If you set the slider at the rightmost position, the back side of the paper may become smudged.
Click OK. The data will be printed without any margins on the paper.
If a page size that cannot be used for borderless printing is selected, the size is automatically changed to the valid page sizes for borderless printing. When High Resolution Paper, T-Shirt Transfers, or Envelope is selected from the Media Type list on the Main tab, you cannot perform borderless printing. When Borderless is selected, the Printer Paper Size, Staple Side (when Duplex Printing is not selected) settings, and the Stamp/Background... button on the Page Setup tab appear grayed out and are unavailable. Print quality may deteriorate or the sheet may be stained at the top and bottom depending on the type of the media used. When the ratio of the height to the width differs greatly from the image data, a portion of the image may not be printed depending on the size of the media used. In this case, crop the image data with an application software according to the paper size.
When Plain Paper is selected for Media Type on the Main tab, borderless printing is not recommended, and therefore the dialog box for media selection appears. If you are using plain paper for test printing, select Plain Paper, and click OK.
Specifying a large amount of extension allows you to perform borderless printing with no problems. However, the portion of the document that extends off the paper range will not be printed. Subjects around the perimeter of a photo may not be printed.
Try borderless printing once. If you are not satisfied with the result of borderless printing, reduce the amount of extension. The extension amount becomes shorter as the Amount of Extension slider is moved to the left.
If the amount of extension is shortened, an unexpected margin may be produced on the print, depending on the size of the paper.
If the Amount of Extension slider is set to the leftmost position, image data will be printed in the full size. If Preview before printing is checked on the Main tab, you can confirm before printing whether there will be no border.

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Fit- to-Page Printing

The procedure for printing document, which is enlarged or reduced to fit to the page size, is as follows:
2. Set fit-to-page printing
Select Fit-to-Page from the Page Layout list on the Page Setup tab.

Using Page Size, select the page size that was set with your application.
Select the size of the paper loaded in the machine from the Printer Paper Size list. If the printer paper size is smaller than the Page Size, the page image will be reduced. If the printer paper size is larger than the page size, the page image will be enlarged.
The current settings are displayed in the Settings Preview on the left side of the printer driver.


Click OK. When you execute print, the document will be enlarged or reduced to fit to the page size.

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Scaled Printing

The procedure for printing a document with pages enlarged or reduced is as follows:
2. Set scaled printing
Select Scaled from the Page Layout list on the Page Setup tab.

Using Page Size, select the page size that was set with your application.
Select a Printer Paper Size
Select a printer paper size, which is different from the Page Size, from the Printer Paper Size list. If the printer paper size is smaller than the Page Size, the page image will be reduced. If the printer paper size is larger than the page size, the page image will be enlarged.


Specify a scaling factor
Directly type in a value into the Scaling box.

The current settings are displayed in the Settings Preview on the left side of the printer driver.
Click OK. When you execute print, the document will be printed with the specified scale.
If the application software with which you created the original has the scaled printing function, configure the settings on your application software. You do not need to also configure the same setting in the printer driver. When Scaled is selected, the Staple Side list box appears grayed out and is unavailable (when Duplex Printing is not selected).
Selecting Scaled changes the printable area of the document.

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Page Layout Printing
The page layout printing function allows you to print more than one page image on a single sheet of paper.

The procedure for performing page layout printing is as follows:
2. Set page layout printing
Select Page Layout from the Page Layout list on the Page Setup tab. The current settings are displayed in the Settings Preview on the left side of the printer driver.

Select the size of the paper loaded in the machine from the Printer Paper Size list. Now you have finished setting the layout of the document from left to right.
If necessary, click Specify..., specify the following settings in the Page Layout Printing dialog box, and click OK.


Pages To increase the number of pages to be included on a single sheet of paper, select a desired number of pages from the list.
Page Order To change the page arrangement order, select an icon from the list to change the page placement order.
Page Border To print a page border around each document page, check this check box.
Click OK on the Page Setup tab. When you execute print, the specified number of pages will be arranged on each sheet of paper in the specified order.

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Poster Printing
The poster printing function allows you to enlarge image data, divide it into several pages, and print these pages on separate sheets of paper. When the pages are pasted together, they form a large print like a poster.

The procedure for performing poster printing is as follows:
1. Open the printer driver setup window
2. Set poster printing
Select Poster from the Page Layout list on the Page Setup tab. The current settings are displayed in the Settings Preview on the left side of the printer driver.

Select the size of the paper loaded in the machine from the Printer Paper Size list. Now you have finished setting 2 by 2-page poster printing.
If necessary, click Specify..., specify the following settings in the Poster Printing dialog box, and then click OK.


Image Divisions Select the number of divisions (vertical x horizontal) from the Image Divisions list. As the number of divisions increases, the number of sheets used for printing increases, allowing you to create a larger poster.
Print "Cut/Paste" in margins To leave out words "Cut" and "Paste", uncheck this check box.
This feature is unavailable when the 64-bit printer driver is used.
Print "Cut/Paste" lines in margins To leave out cut lines, uncheck this check box.
Pages To reprint only specific pages, enter the page number you want to print. To print multiple pages, specify by separating the pages with commas or entering a hyphen between the page numbers.
You can also specify the print range by clicking the pages in the setup preview.
Click OK on the Page Setup tab. When you execute print, the document will be divided into several pages during printing. After all poster pages have been printed, paste the pages together to create a poster.
If ink becomes faint or runs out during printing, you can print the pages you still need, by following the procedure below:
In the Settings Preview on the left of the Page Setup tab, click the pages that do not need to be printed. The pages that were clicked are deleted, and only the pages to be printed are displayed.


Click the deleted pages to display them again. Right-click the Settings Preview to select Print all pages or Delete all pages.
After completing the page selection, click OK. When you execute print, only specified pages will be printed.
When Poster is selected, the Duplex Printing and Print from Last Page check boxes and the Staple Side list box appear grayed out and are unavailable. Since poster printing enlarges the document when printing it, the print results may become coarse.

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Booklet Printing
The booklet printing function allows you to print data for a booklet. Data is printed on both sides of the paper. This type of printing ensures that pages can be collated properly, in page number order, when the printed sheets are folded and stapled at the center.

The procedure for performing booklet printing is as follows:
2. Set booklet printing
Select Booklet from the Page Layout list on the Page Setup tab. The current settings are displayed in the Settings Preview on the left side of the window.

Select the size of the paper loaded in the machine from the Printer Paper Size list.
Click Specify..., specify the following settings in the Booklet Printing dialog box, and then click OK.


Margin for stapling Select which side the stapling margin should be on when the booklet is completed.
Insert blank page To leave one side of a sheet blank, check Insert blank page check box, and select the page to be left blank.
Margin Enter the margin width. The specified width from the center of the sheet becomes the margin for one page.
Page Border To print a page border around each document page, check the Page Border check box.
Click OK on the Page Setup tab.
When you execute print, the document will be printed on one side of a sheet of paper. When the printing of one side is complete, set the paper correctly by following the message and click OK. When the printing of the other side is complete, fold the paper at the center of the margin and make a booklet.
Booklet cannot be selected when a media type other than Plain Paper is selected for Media Type. When Booklet is selected, Duplex Printing, Staple Side, Print from Last Page, and Collate appear grayed out and are unavailable.
The stamp and background are not printed on blank sheets inserted with the Insert blank page function of Booklet Printing.

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Duplex Printing

The procedure for printing data on both sides of a sheet of paper is as follows:
2. Set duplex printing
Check the Duplex Printing check box on the Page Setup tab.

Select Normal-size (or Fit-to-Page, Scaled, or Page Layout) from the Page Layout list.
The printer analyzes the Orientation and Page Layout settings, and automatically selects the best Staple Side. If you want to change the setting, select another value from the list.
If necessary, click Specify Margin... and set the width of the stapling margin, and then click OK.
Click OK on the Page Setup tab.
When you execute print, the document will be printed on one side of a sheet of paper. When the printing of one side is complete, set the paper correctly by following the message and click OK. The document will be printed on the opposite side.

Duplex Printing is unavailable when:
A media type other than Plain Paper is selected from the Media Type list. Poster is selected from the Page Layout list. When Booklet is selected from the Page Layout list, Duplex Printing and Staple Side appear grayed out and are unavailable.
If the Media Type dialog box appears when performing borderless printing during duplex printing, select Plain Paper. If the back side of the paper becomes smudged during duplex printing, perform Bottom Plate Cleaning in the Maintenance tab.

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Stamp/Background Printing
This feature is unavailable when the 64-bit printer driver is used.
The Stamp function allows you to print a stamp text or a bitmap over or behind document data. It also allows you to print date, time and user name. The Background function allows you to print a light illustration behind the document data.
The procedure for performing stamp/background printing is as follows:
"CONFIDENTIAL," "IMPORTANT," and other stamps that are used often in companies are pre-registered.
2. Click Stamp/Background... on the Page Setup tab

The Stamp/Background dialog box opens.

Check the Stamp check box, and select a desired stamp from the list. The current settings are displayed in the Settings Preview on the left side of the Page Setup tab.
If necessary, complete the following settings, and then click OK.

Place stamp over text To print the stamp on the front of the document, check this check box.
The stamp is given priority because the stamp is printed over the document data in the sections where the stamp and the document data overlap. If the Place stamp over text check box is unchecked, the stamp is printed behind the document data and may be hidden in the overlapping sections depending on the application used.
Stamp first page only To print the stamp only on the first page, check this check box.
Define Stamp... button To change the stamp text, bitmap, or position, click this (refer to Saving a Stamp Setting).
Click OK on the Page Setup tab. When you execute print, the data is printed with the specified stamp.
1. Select the background for which the settings are to be changed
Two bitmap files are pre-registered as samples.
The Stamp/Background dialog box opens.
Check the Background check box, and select a desired background from the list. The current settings are displayed in the Settings Preview on the left side of the Page Setup tab.
If necessary, complete the following settings, and then click OK.
Background first page only To print the background only on the first page, check this check box.
Select Background... button To use another bitmap file or change the layout or density of a background, click this (refer to Saving Image Data to be Used as a Background ).
Click OK on the Page Setup tab. When you execute print, the data is printed with the specified background.
When Borderless is selected, the Stamp/Background... button appears grayed out and is unavailable.
The stamp and background are not printed on blank sheets inserted with the Insert blank page function of Booklet Printing.
Saving a Stamp Setting
Saving Image Data to be Used as a Background


Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Stamp/Background Printing > Saving a Stamp Setting
This feature is unavailable when the 64-bit printer driver is used.
You can create and save a new stamp. You can also change and register some of the settings of an existing stamp. Unnecessary stamps can be deleted at any time.
The procedure for registering a new stamp is as follows:
1. Open the printer driver setup window
2. Click Stamp/Background... on the Page Setup tab
The Stamp/Background dialog box opens.
The Stamp Settings dialog box opens.


Select Text, Bitmap, or Date/Time/User Name for Stamp Type.
For Text registration, the characters must already be entered in Stamp Text. Change the TrueType Font, Style, Size, and Outline settings, as necessary. You can select the color of the stamp by clicking Select Color
For Bitmap, click Select File... and select the bitmap file (.bmp) to be used. Change the settings of the Size and Transparent white area if necessary.
For Date/Time/User Name, the creation date/time and user name of the printed object are displayed in Stamp Text. Change the settings of TrueType Font, Style, Size, and Outline, if necessary. You can select the color of the stamp by clicking Select Color
Stamp Text appears grayed out and is unavailable if Date/Time/User Name is selected.
Select the stamp position from the Position list. You can also select Custom from the Position list and specify coordinates for X-Position and Y-Position. You can also change the stamp position by dragging the stamp in the preview window. To change the stamp position angle, type a value in the Orientation box directly.
Click the Save settings tab and enter a new stamp title in the Title box, and then click Save. Click OK when the confirmation message appears.
Click OK. The Stamp/Background dialog box opens again. The registered title appears in the Stamp list.
1. Select the stamp for which the settings are to be changed
Check the Stamp check box in the Stamp/Background dialog box, and then select the title of the stamp to be changed from the Stamp list.
The Stamp Settings dialog box opens.
Stamp tab · Placement tab

3. Configure the stamp while viewing the preview window
4. Save the stamp
Click Save overwrite on the Save settings tab. If you want to save the stamp with a different title, type a new title in the Title box and click Save. Click OK when the confirmation message appears.
Click OK. The Stamp/Background dialog box opens again. The registered title appears in the Stamp list.
1. Click Define Stamp... in the Stamp/Background dialog box
The Stamp Settings dialog box opens.
Select the title of the stamp you want to delete from the Stamps list on the Save settings tab. Then click Delete. Click OK when the confirmation message appears.
Click OK. The Stamp/Background dialog box opens again.

Page 277 of 817 pages Saving Image Data to be Used as a Background
Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Stamp/Background Printing > Saving Image Data to be Used as a Background
This feature is unavailable when the 64-bit printer driver is used.
You can select a bitmap file and save it as a new background. You can also change and register some of the settings of an existing background. An unnecessary background can be deleted at any time.
The procedure for registering image data to be used as a background is as follows:
1. Open the printer driver setup window
2. Click Stamp/Background... on the Page Setup tab
The Stamp/Background dialog box opens.
The Background Settings dialog box opens.

Page 278 of 817 pages Saving Image Data to be Used as a Background

Click Select File Select the target image data (bitmap file), and then click Open.
Layout Method Select how the background image data is to be placed. When Custom is selected, you can set coordinates for X-Position and Y-Position. You can also change the background position by dragging the image in the preview window.
Intensity Set the intensity of the background image data with the Intensity slider. To lighten the background, move the slider to the left. To darken the background, move the slider to the right. To print the background at the original bitmap intensity, move the slider to the rightmost position.
Click the Save settings tab and enter a new stamp title in the Title box, and then click Save. Click OK when the confirmation message appears.
Click OK. The Stamp/Background dialog box opens again. The registered title appears in the Background list.
1. Select the background for which the settings are to be changed
Check the Background check box in the Stamp/Background dialog box, and then select the title of the background you want to change from the Background list.
The Background Settings dialog box opens.
4. Save the background
Click Save overwrite on the Save settings tab. If you want to save the background with a different title, type a new title in the Title box and click Save. Click OK when the confirmation message appears.
Click OK. The Stamp/Background dialog box opens again. The registered title appears in the Background list.

Page 279 of 817 pages Saving Image Data to be Used as a Background
1. Click Select Background... in the Stamp/Background dialog box
The Background Settings dialog box opens.
Select the title of the background you want to delete from the Backgrounds list on the Save settings tab, and then click Delete. Click OK when the confirmation message appears.
Click OK. The Stamp/Background dialog box opens again.

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Printing an Envelope
For details on how to load an envelope into the machine, refer to "Loading Envelopes" in the manual: Basic Guide.
The procedure for performing envelope printing is as follows:
Fold down the envelope flap.
Orient the envelope so that the flap is on the left and the folded surface is facing down.

3. Select the media type
Select Envelope from Commonly Used Settings on the Quick Setup tab.


Select Youkei 4, Youkei 6, Comm.Env. #10, or DL Env. in the Envelope Size Setting dialog box, and then click OK.
To print the addressee horizontally, select Landscape for Orientation.
Select High or Standard for Print Quality.

7. Complete the setup
Click OK. When you execute print, the information is printed on the envelope.

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Displaying the Print Results before Printing
You can display and check the print result before printing.
The procedure for displaying the print result before printing is as follows:
You can also set the print results display on the Quick Setup tab.
2. Set the preview
Check the Preview before printing check box on the Main tab.

Click OK. The Canon IJ Preview will start and the print result will be displayed before printing.
Canon IJ Preview

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Setting Paper Dimensions (Custom Size)
You can specify the height and width of paper if its size cannot be selected in Page Size. Such a paper size is called a custom size.
The procedure for specifying a custom size is as follows:
You can also set a custom size in Printer Paper Size on the Quick Setup tab.
On your application's paper size feature, specify your custom size.
If the application software that created the document has a function for specifying the height and width values, use the application software to set the values. If the application software does not have such a function or if the document does not print correctly, use the printer driver to set the values.
3. Select the paper size
Select Custom... for Page Size on the Page Setup tab.

The Custom Paper Size dialog box opens.

Specify Units, and enter the Width and Height of the paper to be used. Then click OK.

5. Complete the setup
Click OK on the Page Setup tab. When you execute print, the data is printed with the specified paper size.

Page 285 of 817 pages Changing the Print Quality and Correcting Image Data
Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data
Selecting a Combination of the Print Quality Level and a Halftoning Method
Printing a Color Document in Monochrome
Optimal Photo Printing of Image Data
Adjusting Colors with the Printer Driver
Printing with ICC Profiles
Representing Image Data with a Single Color
Presenting Image Data with Vivid Colors
Changing Color Properties to Improve Coloration

Page 286 of 817 pages Selecting a Combination of the Print Quality Level and a Halftoning Method
Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Selecting a Combination of the Print Quality Level and a Halftoning Method
You can set the print quality level and the halftoning method.

The procedure for setting the print quality level and the halftoning method is as follows:
2. Select the print quality
Select Custom for Print Quality on the Main tab, and click Set

The Custom dialog box opens.

Move the Quality slider to select the quality level. Select Halftoning and click OK.

Page 287 of 817 pages Selecting a Combination of the Print Quality Level and a Halftoning Method
Halftones refer to color shades between the darkest color and the brightest color. The printer replaces the color shades with a collection of small dots to express the halftones. Dither arranges the dots according to fixed rules to express the halftones. Diffusion places the dots randomly to express the halftones. When you select Auto, the data is printed with the optimal halftoning method for the selected print quality.
Click OK on the Main tab. When you execute print, the data is printed with the specified quality level and halftoning method.
Certain print quality levels and halftoning methods cannot be selected depending on the settings of Media Type.
When the part of the object is not printed, selecting Diffusion for Halftoning may solve the problem.

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Printing a Color Document in Monochrome

The procedure for printing a color document in monochrome is as follows:
You can also set a grayscale printing in Additional Features on the Quick Setup tab.
2. Set grayscale printing
Check the Grayscale Printing check box on the Main tab.

Click OK. When you execute print, the document is converted to grayscale data. It allows you to print the color document in monochrome.
When the Grayscale Printing check box is checked, the printer driver processes image data as sRGB data. In this case, actual colors printed may differ from those in the original image data. When using the grayscale printing function to print Adobe RGB data, convert the data to sRGB data using an application software.
During Grayscale Printing, color inks may be used as well as black ink.

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Specifying Color Correction
You can specify the color correction method suited to the type of document to be printed. Normally, the printer driver adjusts the colors by using Canon Digital Photo Color so that data is printed with color tints that most people prefer. This method is suitable for printing sRGB data.
If you want to print by using the color space of sRGB or Adobe RGB data effectively, select ICM. If you want to use an application software to specify an ICC profile, select None.
The procedure for specifying color correction is as follows:
You can also set color correction on the Quick Setup tab by choosing Photo Printing under Commonly Used Settings, and then choosing Color/Intensity Manual Adjustment under Additional Features.
2. Select the manual color adjustment
On the Main tab, select Manual for Color/Intensity, and click Set

The Manual Color Adjustment dialog box opens.
Click Matching tab, select Color Correction setting suited to your purpose from the following, and click OK.


Driver Matching By using Canon Digital Photo Color, you can print sRGB data with color tints that most people prefer. Driver Matching is the default setting for Color Correction.
ICM You can print by using the color space of sRGB or Adobe RGB data effectively.
None The printer driver does not perform color adjustment. Select this value if you are specifying an individually created profile or a profile for special Canon paper in an application software to print data.
Click OK on the Main tab. When you execute print, the data is printed with the specified color adjustment method.
If ICM is disabled in the application software, ICM is unavailable for Color Correction and the printer may not be able to print the image data properly. When the Grayscale Printing check box on the Main tab is checked, Color Correction appears grayed out and is unavailable.
Optimal Photo Printing of Image Data
Adjusting Colors with the Printer Driver
Printing with ICC Profiles

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Specifying Color Correction > Optimal Photo Printing of Image Data
When people print images taken with digital cameras, they sometimes feel that the printed color tones differ from those of actual image or those displayed on the monitor. To get the print results as close as possible to the desired color tones, you must select a printing method that is best suited to the application software used or to your purpose.
Devices such as digital cameras, scanners, monitors, and printers handle color differently. Color management (color matching) is a method that manages device-dependent "colors" as a common color space. For Windows, a color management system called "ICM" is built into the operating system. sRGB and Adobe RGB are popularly used as common color spaces. Adobe RGB has a wider color space than sRGB.
ICC profiles convert device-dependent "colors" into a common color space. By using an ICC profile and carrying out color management, you can draw out the color space of the image data within the color reproduction area that the printer can express.
The recommended printing method depends on the color space (Adobe RGB or sRGB) of the image data or the application software to be used. There are two typical printing methods. Check the color space (Adobe RGB or sRGB) of the image data and the application software to be used, and then select the printing method suited to your purpose.
To print using Canon Digital Photo Color
To print using the color space of the data effectively
Target data: Adobe RGB data or sRGB data Application software: An ICC profile can or cannot be specified. Printing method: Printing with ICC Profiles

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Specifying Color Correction > Adjusting Colors with the Printer Driver
You can specify the color correction function of the printer driver to print sRGB data with color tints that most people prefer (through the use of Canon Digital Photo Color).
The procedure for adjusting colors with the printer driver is as follows:
2. Select the media type
Select the type of paper loaded in the machine from the Media Type list on the Main tab.

Select High, Standard, or Fast for Print Quality.
Select Manual for Color/Intensity, and click Set The Manual Color Adjustment dialog box opens.
Click Matching tab, and select Driver Matching for Color Correction.

6. Set the other items
If necessary, click Color Adjustment tab, and adjust the color balance of Cyan, Magenta, Yellow, and adjust Brightness, Intensity, and Contrast settings, and then click OK.
Click OK on the Main tab. When you execute print, the printer driver adjusts the colors when printing the data.
Selecting a Combination of the Print Quality Level and a Halftoning Method

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Specifying Color Correction > Printing with ICC Profiles
If the image data has a specified ICC profile, you can effectively use the color space (Adobe RGB or sRGB) of the data when printing.
The printer driver setting procedure varies depending on the application software used to print.
Printing Image Data from the Application Software That Can Specify an ICC Profile
When using Adobe Photoshop, Canon Digital Photo Professional, or any other application software that allows you to specify an ICC profile, you can use the color management system (ICM) found in Windows when printing the data. You can print the editing and touch-up results of an application software by effectively using the color space of the ICC profile specified in the image data.
To use this printing method, you must first use an application software to specify an ICC profile in the image data. For instructions on specifying an ICC profile with an application software program, refer to the manual of the application software you are using.
2. Select the media type
Select the type of paper loaded in the machine from the Media Type list on the Main tab.
Select High, Standard, or Fast for Print Quality.
Select Manual for Color/Intensity, and click Set The Manual Color Adjustment dialog box opens.
Click Matching tab, and select ICM for Color Correction.


If necessary, click Color Adjustment tab, and adjust the color balance of Cyan, Magenta, Yellow, and adjust Brightness, Intensity, and Contrast settings, and then click OK.
Click OK on the Main tab. When you execute print, the printer uses the color space of the image data.
If you print an image by specifying an individually created profile or a profile for special Canon paper in an application software, select None from the Color Correction menu of the printer driver.
Printing Image Data from the Application Software That Cannot Specify an ICC Profile
When printing from an application software that does not allow you to specify an ICC profile, specify the ICC profile in the print settings of the printer driver and print the data. When printing Adobe RGB data, you can print the data with the Adobe RGB color space even if the application software does not support Adobe RGB.
2. Select the media type
Select the type of paper loaded in the machine from the Media Type list on the Main tab.

3. Select the print quality
Select High, Standard, or Fast for Print Quality.
Select Manual for Color/Intensity, and click Set Manual Color Adjustment dialog box opens.
Click Matching tab, and select ICM for Color Correction.
Select an Input Profile that matches the color space of the image data.
For sRGB data or data without an ICC profile:
Select Standard.
For Adobe RGB data:
Select Adobe RGB (1998).
If the application software specifies an input profile, the input profile setting of the printer driver

becomes invalid. If no ICC profiles are installed on your computer, Adobe RGB (1998) is not displayed. You can install ICC profiles from the Setup CD-ROM that accompanies the machine.
If necessary, click Color Adjustment tab, and adjust the color balance of Cyan, Magenta, Yellow, and adjust Brightness, Intensity, and Contrast settings, and then click OK.
Click OK on the Main tab. When you execute print, the data is printed with the color space of the selected image data.
Selecting a Combination of the Print Quality Level and a Halftoning Method

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Adjusting Color Balance
You can adjust the color tints during printing. Since this function adjusts color balance of the output by changing the ink ratios of each color, it changes the total color balance of the document. Use the application software if you want to change the color balance significantly. Use the printer driver only if you want to adjust the color balance slightly. The following sample shows the case when Color Balance is used to intensify cyan and to diminish yellow so that the overall colors are more uniform.


No adjustment Adjusted in Color Balance
The procedure for adjusting color balance is as follows:
You can also set color balance on the Quick Setup tab by choosing Photo Printing under Commonly Used Settings, and then choosing Color/Intensity Manual Adjustment under Additional Features.
2. Select the manual color adjustment
On the Main tab, select Manual for Color/Intensity, and click Set
The Manual Color Adjustment dialog box opens.
There are individual sliders for Cyan, Magenta, and Yellow. Each color becomes stronger when the corresponding slider is moved to the right, and becomes weaker when the corresponding slider is moved to the left. For example, if cyan becomes weaker, the color red becomes stronger. You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50.
After adjusting each color, click OK.


Adjust the slider gradually.
Click OK on the Main tab. When you execute print, the document is printed with the adjusted color balance.
When the Grayscale Printing check box on the Main tab is checked, Cyan, Magenta, and Yellow appear grayed out and are unavailable.
Selecting a Combination of the Print Quality Level and a Halftoning Method

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Adjusting Brightness
You can change the brightness of the overall image data during printing. This function does not change pure white or pure black but it changes the brightness of the intermediate colors. The following sample shows the print result when the Brightness specification is changed.



Light is selected Normal is selected Dark is selected
The procedure for adjusting brightness is as follows:
You can also set brightness on the Quick Setup tab by choosing Photo Printing under Commonly Used Settings, and then choosing Color/Intensity Manual Adjustment under Additional Features.
2. Select the manual color adjustment
On the Main tab, select Manual for Color/Intensity, and click Set
The Manual Color Adjustment dialog box opens.
Select Light, Normal, or Dark for Brightness, and click OK.


Click OK on the Main tab. When you execute print, the data is printed at the specified brightness.
Selecting a Combination of the Print Quality Level and a Halftoning Method

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Adjusting Intensity
You can dilute (brighten) or intensify (darken) the colors of the overall image data during printing. If you want to sharpen the print results, you should intensify the colors. The following sample shows the case when the intensity is increased so that all colors become more intense when the image data is printed.


No adjustment Higher Intensity
The procedure for adjusting intensity is as follows:
You can also set intensity on the Quick Setup tab by choosing Photo Printing under Commonly Used Settings, and then choosing Color/Intensity Manual Adjustment under Additional Features.
2. Select the manual color adjustment
Select Manual for Color/Intensity on the Main tab, and click Set
The Manual Color Adjustment dialog box opens.
Moving the Intensity slider to the right intensifies (darkens) the colors. Moving the slider to the left dilutes (brightens) the colors. You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50.
After adjusting each color, click OK.


Adjust the slider gradually.
Click OK on the Main tab. When you execute print, the image data is printed with the adjusted intensity.
Selecting a Combination of the Print Quality Level and a Halftoning Method

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Adjusting Contrast
You can adjust the image contrast during printing. To make the differences between the light and dark portions of images greater and more distinct, increase the contrast. On the other hand, to make the differences between the light and dark portions of images smaller and less distinct, reduce the contrast.


No adjustment Adjust the contrast
The procedure for adjusting contrast is as follows:
You can also set contrast on the Quick Setup tab by choosing Photo Printing under Commonly Used Settings, and then choosing Color/Intensity Manual Adjustment under Additional Features.
2. Select the manual color adjustment
On the Main tab, select Manual for Color/Intensity, and click Set
The Manual Color Adjustment dialog box opens.
Moving the Contrast slider to the right increases the contrast, and moving it to the left decreases the contrast. You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50.
After adjusting each color, click OK.


Adjust the slider gradually.
Click OK on the Main tab. When you execute print, the image is printed with the adjusted contrast.
Selecting a Combination of the Print Quality Level and a Halftoning Method

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Simulating an Illustration
With the Simulate Illustration function, you can print full-color or 256-color image data so that it looks like a hand-drawn illustration. You can add different effects to the original profile and colors.

The procedure for performing Simulate Illustration is as follows:
2. Set the Simulate Illustration
Check the Simulate Illustration check box on the Effects tab, and adjust the Contrast as necessary. Moving the slider to the right lightens the image data and moving the slider to the left darkens the image data. The current settings are displayed in the Settings Preview on the left side of the printer driver.

Click OK. When you execute print, the image will be printed so that it looks hand-drawn.

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Representing Image Data with a Single Color
With the Monochrome Effects function, you can benefit from coloring effects such as changing a photograph to a sepia tone image.

The procedure for performing Monochrome Effects is as follows:
2. Set Monochrome Effects
Check the Monochrome Effects check box on the Effects tab and select your desired color. If you use Select Color, move the Color slider to specify the color you want. The current settings are displayed in the Settings Preview on the left side of the printer driver.

Click OK. When you execute print, the image will be printed with a single color.
When the Grayscale Printing check box on the Main tab is checked, Monochrome Effects appears grayed out and is unavailable.

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Presenting Image Data with Vivid Colors
The Vivid Photo function allows you to print image data with vivid colors. The notable feature of Vivid Photo is that it emphasizes the colors in background sceneries while maintaining the human skin color natural. By using this function, you can make vivid hues appear even more vivid.

The procedure for performing Vivid Photo is as follows:
You can also set vivid photos on the Quick Setup tab by choosing Photo Printing under Commonly Used Settings, and then choosing Additional Features.
2. Set Vivid Photo
Check the Vivid Photo check box on the Effects tab.

Click OK. When you execute print, the image will be printed with vivid colors.

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Smoothing Jagged Outlines
The Image Optimizer function allows you to smooth jagged outlines in photos and graphics that have been enlarged with your application. This feature is especially useful when printing low-resolution images from Web pages.

The procedure for performing Image Optimizer is as follows:
2. Perform Image Optimizer
Check the Image Optimizer check box on the Effects tab.

Click OK. The photos and graphics will be printed with jagged outlines smoothed.
Depending on application software or resolution of image data, the Image Optimizer may have no discernible effects. It may take longer to complete printing if the Image Optimizer is used.

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Changing Color Properties to Improve Coloration
The Photo Optimizer PRO function corrects colors of digital camera images or scanned images. It is specially designed to compensate for color shift, overexposure, and underexposure.

The procedure for performing Photo Optimizer PRO is as follows:
2. Set the Auto Photo mode
Check the Photo Optimizer PRO check box on the Effects tab.

Normally there is no need to check the Apply Throughout Page check box. Images within each page are optimized on an image-by-image basis.
Check the Apply Throughout Page check box when printing image data that has been processed, such as being cropped or rotated. In this case the entire page will be treated as a single image to be optimized.
Click OK. When you execute print, the images will be printed with color compensation.
Photo Optimizer PRO does not function when:
Background is set in the Stamp/Background dialog box on the Page Setup tab.

Define Stamp... is selected in the Stamp/Background dialog box on the Page Setup tab, and the bitmapped stamp is configured.
Depending on images, the Photo Optimizer PRO may have no discernible effect.

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Reducing Photo Noise
With the Photo Noise Reduction function, you can reduce the digital camera noise and improve the image quality of the digital print.


The procedure for performing Photo Noise Reduction is as follows:
2. Set Photo Noise Reduction
Check the Photo Noise Reduction check box on the Effects tab and select Normal or Strong for the level.

Click OK. When you execute print, the image will be printed with the digital camera noise being reduced.
It is recommended to select Normal for most cases. Select Strong if you have selected Normal and the noise still bothers you. Depending on application software or resolution of image data, effects of digital camera noise reduction may not be obvious. When this function is used for other than photos taken by digital cameras, image may be distorted.


Advanced Guide > Printing from a Computer > Printing with Other Application Software > Overview of the Printer Driver > Overview of the Printer Driver
Canon IJ Printer Driver
How to Open the Printer Driver Setup Window
Canon IJ Status Monitor
The Canon IJ Preview
Maintenance Tab


| Instructions for Use (Printer Driver) | How to Use This Manual | Printing This Manual |
Changing Machine Settings from Your Computer
Printing with Easy Setup
Changing the Print Options
Setting a Page Size and Orientation
Setting the Number of Copies and Printing Order
Registering a Frequently Used Printing Profile
Setting the Ink Cartridge
Setting the Stapling Margin
Managing the Machine Power
Reducing the Machine Noise
Changing the Machine Operation Mode
Performing Maintenance from a Computer
Cleaning the Print Heads
Cleaning the Paper Feed Rollers
Aligning the Print Head Position
Checking the Print Head Nozzles
Cleaning Inside the Machine
Displaying the Print Results before Printing
Overview of the Printer Driver
Setting Paper Dimensions (Custom Size)
Canon IJ Printer Driver
Changing the Print Quality and Correcting Image Data
How to Open the Printer Driver Setup Window
Selecting a Combination of the Print Quality Level and a Halftoning Method
Canon IJ Status Monitor
The Canon IJ Preview
Printing a Color Document in Monochrome
Updating the MP Drivers
Obtaining the Latest MP Drivers
Uninstalling the MP Drivers
Before Installing the MP Drivers
Installing the MP Drivers
Representing Image Data with a Single Color
Deleting the Undesired Print Job
Presenting Image Data with Vivid Colors
Sharing the Printer on a Network
Changing Color Properties to Improve Coloration

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Overview of the Printer Driver > Canon IJ Printer Driver
The Canon IJ printer driver is software that is installed on your computer for printing data on this machine.
The Canon IJ printer driver converts the print data created by your Windows application into data that your printer can understand and sends the converted data to the printer.
Because different models support different print data formats, you need a Canon IJ printer driver for the specific model you are using.
You can display the Help describing the driver setting items through the Printing Preferences screen of the Canon IJ printer driver.
To view all descriptions of a tab...
Click the Help button on each tab. A dialog box opens, displaying a description of each item on the tab. You can also click the link found in the description of an item to display a description of the linked dialog box.
To see a description for each item...
Right-click the item you want to learn about and then click Help.
[Help] button is found at the right end of the title bar, click that button, and then click the item you want to learn about. A description of the item is displayed.
How to Open the Printer Driver Setup Window
Alternatively, if the

Page 317 of 817 pages How to Open the Printer Driver Setup Window
Advanced Guide > Printing from a Computer > Printing with Other Application Software > Overview of the Printer Driver > Canon IJ Printer Driver > How to Open the Printer Driver Setup Window
The printer driver setup window can be displayed through the application software in use or the Start menu of the Windows.
This guide mainly describes operations on the Windows Vista. Operations may differ depending on versions of the Windows.
Follow the procedure below to configure print settings when printing.
In general, select Print on the File menu to open the Print dialog box.
The printer driver setup window appears.
Depending on application software you use, command names or menu names may vary and there may be more steps. For details, refer to the user's manual of your application software.
Follow the procedure below to perform maintenance operations such as print head cleaning, or to configure print settings that are common for all application software.
In Windows Vista, select the Start menu -> Control Panel -> Hardware and Sound -> Printers.
In Windows XP, select the Start menu -> Control Panel -> Printers and Other Hardware -> Printers and Faxes.
In Windows 2000, select the Start menu -> Settings -> Printers.
The printer driver setup window appears.
Opening the printer driver setup window through Properties displays such tabs regarding the Windows functions as the Ports (or Advanced) tab. Those tabs do not appear when opening through Printing Preferences or application software. About tabs regarding Windows functions, refer to the user's manual for the Windows.

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Overview of the Printer Driver > Canon IJ Printer Driver > Maintenance Tab
The Maintenance tab allows you to perform machine maintenance or change the settings of the machine.

Cleaning the Print Heads
Cleaning the Paper Feed Rollers
Aligning the Print Head Position
Checking the Print Head Nozzles
Cleaning Inside the Machine
Setting the Ink Cartridge
Managing the Machine Power
Reducing the Machine Noise/Quiet Mode
Changing the Machine Operation Mode

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Overview of the Printer Driver > Canon IJ Status Monitor
The Canon IJ Status Monitor is an application software that shows the status of the printer and the progress of printing on the Windows screen. You will know the status of the printer with graphics, icons, and messages.
The Canon IJ Status Monitor launches automatically when data is sent to the printer. When launched, the Canon IJ Status Monitor appears as a button on the Task Bar.
Click the Status Monitor button displayed on the Task Bar. The Canon IJ Status Monitor appears.

To open the Canon IJ Status Monitor when the printer is not printing, open the printer driver setup window and click View Printer Status... on the Maintenance tab.
The Canon IJ Status Monitor is automatically displayed when an error occurs (e.g., if the printer runs out of paper or if the ink is low).

In such cases, take the appropriate action as described.

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Overview of the Printer Driver > The Canon IJ Preview
The Canon IJ Preview is an application software that displays what the print result will look like before a document is actually printed.
The preview reflects the information that is set within the printer driver and allows you to check the document layout, print sequence, and number of pages. You can also change the media type settings.
If you want to display a preview before printing, open the printer driver setup window, click the Main tab, and check the Preview before printing check box.
If you do not want to display a preview before printing, uncheck the check box.
Displaying the Print Results before Printing

Page 321 of 817 pages Printing Using the Operation Panel of the Machine
Advanced Guide > Printing Using the Operation Panel of the Machine
Printing Lined Paper or Graph Paper
Copying

Advanced Guide > Printing Using the Operation Panel of the Machine > Printing Lined Paper or Graph Paper
Printing Template Forms Such As Lined Paper or Graph Paper

Page 323 of 817 pages Printing Template Forms Such As Lined Paper or Graph Paper
Advanced Guide > Printing Using the Operation Panel of the Machine > Printing Lined Paper or Graph Paper > Printing Template Forms Such As Lined Paper or Graph Paper
You can print a template form such as lined paper, graph paper, or check list, etc. on A4, Letter-sized, or B5 plain paper.

button to select the template you want to print, then press the OK button.
The following templates are available:
You can select three line spacing formats.
You can select two square sizes.
You cannot print Notebook paper or Graph paper on B5 sized paper.
You can print a notepad with checkboxes.
You can print staff paper with 10 or 12 staves.
button to specify the paper size, then press the OK button.
button or the Numeric buttons to specify the number of copies.

Page 324 of 817 pages Printing Template Forms Such As Lined Paper or Graph Paper
The machine starts template printing.

Advanced Guide > Printing Using the Operation Panel of the Machine > Copying
Using Useful Copy Functions
Making Copies

Advanced Guide > Printing Using the Operation Panel of the Machine > Copying > Making Copies
For the basic procedure to make copies, refer to Copying.
Reducing or Enlarging a Copy
Setting Items

Advanced Guide > Printing Using the Operation Panel of the Machine > Copying > Making Copies > Setting Items
You can change the copy settings such as the page size, media type, or intensity.
In Copy mode, press the Settings button repeatedly to switch the item to set. Use the
button to select the item, then press the OK button to set.
The * (asterisk) on the LCD indicates the current setting. The settings of the page size, media type, or intensity are retained even if the machine is turned off. Some of setting items are not available depending on the copy method.
Select the reduction/enlargement method.
Reducing or Enlarging a Copy
Ex:

Preset ratio/Magnification/Fit to page
Select the page size of the loaded paper.
Ex:

8.5"x11"(LTR)/8.5"x14"/Legal/A4/B5/A5/4"x6"(10x15cm)/5"x7"(13x18cm)
Some of setting items are not available depending on the country or region of purchase.
Select the media type of the loaded paper.
Ex:

Pro II/Pro Platinum/Plus Semi-gloss/Glossy/Matte/Plain paper/Plus Glossy II
Change the intensity.
Ex:

Manual adjust/Auto adjust (A)
If you select Auto adjust (A), load the original on the Platen Glass. If you select Auto adjust (A), A appears on the LCD.

If you select Manual adjust, use the
button to increase it.
button to decrease the intensity or the
Adjust print quality according to the original.
Ex:

Fast can be selected only when the media type is set to Plain paper. If you use Fast with the media type set to Plain paper and the quality is not as good as expected, select Standard or High and try copying again. Select High to copy in grayscale. Grayscale renders tones in a range of grays instead of black or white.
Fast/Standard/High

Advanced Guide > Printing Using the Operation Panel of the Machine > Copying > Making Copies > Reducing or Enlarging a Copy
Refer to Loading Paper / Originals for how to load the original on the Platen Glass or in the ADF.
button to select the reduction/enlargement method, then press the OK button.
Ex:

Some of reduction/enlargement methods are not available depending on the copy method.
Preset ratio You can select one of the preset ratios to reduce or enlarge copies.

button to select a preset ratio to match the size of your original document and printing paper, then press OK button.
Magnification You can specify the copy ratio as a percentage to reduce or enlarge copies.

(A) 125% Use the
button or the Numeric buttons to specify the reduction or enlargement ratio (25 - 400 %), then press OK button.
Press and hold down the
button to quickly advance through the ratios. For details, refer to Key repeat.
Fit to page The machine automatically reduces or enlarges the image to fit the page size.
Use the


When you select Fit to page, the document size may not be detected correctly depending on the original. In this case, select Preset ratio or Magnification. When Fit to page is selected, load the document on the Platen Glass.
After you finish selecting the reduction/enlargement method, the LCD returns to the copy standby mode.
button or the Numeric buttons to specify the number of copies.
You can change the page size, media type, intensity, or image quality by pressing the Settings button. For details, refer to Setting Items.
The machine starts copying. Remove the original on the Platen Glass or the Document Output Slot after copying is complete.
Do not open the Document Cover or remove the original from the Platen Glass until copying is complete.
To cancel copying, press the Stop button.

Advanced Guide > Printing Using the Operation Panel of the Machine > Copying > Using Useful Copy Functions
Choose the copy method according to your purpose.
Refer to Settings for Special Copy for how to select the copy method.
When copying a thick original document such a book, you can make a copy without black margins around the image.
Copying Thick Originals Such as Books (Frame Erase)
You can easily make 16 stickers from 4" x 6" / 101.6 x 152.4 mm photos or graphics using Canon sticker paper.
Copying on Stickers (Sticker Copy)
You can copy images so that they fill the entire page without borders.
Copying without Borders (Borderless Copy)
You can copy an image multiple times onto a single page. You can set the machine to automatically select the number of times it repeats the image, or you can specify the number.
Repeating an Image on a Page (Image Repeat)
You can copy two original pages onto a single sheet of paper by reducing each image.
Copying Two Pages to Fit onto a Single Page (2-on-1 Copy)
You can copy four original pages onto a single sheet of paper by reducing each image. Four different layouts are available.
Copying Four Pages to Fit onto a Single Page (4-on-1 Copy)
You can obtain sorted printouts when making multiple copies of a multi-paged original.
Making Multiple Copies of an Entire Document (Collated Copy)

Advanced Guide > Printing Using the Operation Panel of the Machine > Copying > Using Useful Copy Functions > Settings for Special Copy
For details on the types and conditions of originals which you can copy, refer to Loading Paper / Originals.
button to select the copy method.
To cancel Special copy settings, press the Stop button. If the number of copies or the intensity has been set already, press the Stop button twice.

Advanced Guide > Printing Using the Operation Panel of the Machine > Copying > Using Useful Copy Functions > Copying without Borders (Borderless Copy)
You can copy images so that they fill the entire page without borders.

Settings for Special Copy
button to select Borderless copy, then press the OK button.
If a page size setting or a media type setting is selected that cannot be used in borderless copying, the LCD displays the following message.

button to select the page size, then press the OK button.
button to select the media type, then press the OK button.
button or the Numeric buttons to specify the number of copies.
Load the document on the Platen Glass when using this function. Slight cropping may occur at the edges since the copied image is enlarged to fill the whole page. You can change the width to be cropped from the borders of the original image as needed. For details, refer to Extended copy amt..
Setting Items

Page 334 of 817 pages Copying Two Pages to Fit onto a Single Page (2-on-1 Copy)
Advanced Guide > Printing Using the Operation Panel of the Machine > Copying > Using Useful Copy Functions > Copying Two Pages to Fit onto a Single Page (2-on-1 Copy)
You can copy two original pages (A) (B) onto a single sheet of paper (C) by reducing each image.

Settings for Special Copy
button to select 2-on-1 copy, then press the OK button.
If a page size setting or a media type setting is selected that cannot be used in 2-on-1 copying, the LCD displays the following message.
button to select the page size, then press the OK button.
button to select the media type, then press the OK button.
button or the Numeric buttons to specify the number of copies.
When the document has been loaded on the Platen Glass: When the first sheet of document finishes being scanned, the message below is displayed.

If you have another sheet of document to scan, load it on the Platen Glass and press the OK button. If you do not need more scanning, press the Tone button. When the document has been loaded in the ADF: The machine starts scanning the next sheet of document automatically after one sheet of document finishes being scanned.
If Memory is full appears on the LCD when scanning, set the print quality to Standard or reduce the number of sheets of documents, then try copying again. If the problem is not resolved, set the print quality to Fast and try copying again.
Setting Items

Page 335 of 817 pages Copying Four Pages to Fit onto a Single Page (4-on-1 Copy)
Advanced Guide > Printing Using the Operation Panel of the Machine > Copying > Using Useful Copy Functions > Copying Four Pages to Fit onto a Single Page (4-on-1 Copy)
You can copy four original pages onto a single sheet of paper by reducing each image. Four different layouts are available.

Settings for Special Copy
button to select 4-on-1 copy, then press the OK button.
button to specify the layout pattern, then press the OK button.
You can select Layout 1, Layout 2, Layout 3, or Layout 4. If a page size setting or a media type setting is selected that cannot be used in 4-on-1 copying, the LCD displays the following message.
button to select the page size, then press the OK button.
button to select the media type, then press the OK button.
button or the Numeric buttons to specify the number of copies.
When the document has been loaded on the Platen Glass: When each sheet, from the first to third sheet of document, finishes being scanned, the message below is displayed.
If you have another sheet of document to scan, load it on the Platen Glass and press the OK button. If you do not need more scanning, press the Tone button. When the document has been loaded in the ADF: The machine starts scanning the next sheet of document automatically after one sheet of document finishes being scanned.

Page 336 of 817 pages Copying Four Pages to Fit onto a Single Page (4-on-1 Copy)
If Memory is full appears on the LCD when scanning, set the print quality to Standard or reduce the number of sheets of documents, then try copying again. If the problem is not resolved, set the print quality to Fast and try copying again.

Page 337 of 817 pages Repeating an Image on a Page (Image Repeat)
Advanced Guide > Printing Using the Operation Panel of the Machine > Copying > Using Useful Copy Functions > Repeating an Image on a Page (Image Repeat)
You can copy an image multiple times onto a single page. You can set the machine to automatically select the number of times it repeats the image, or you can specify the number.

Settings for Special Copy
button to select Image repeat, then press the OK button.
button to select Auto or Manual layout, then press the OK button.
If you selected Auto, proceed to step 5. If you selected Manual layout, proceed to step 3.
When selecting Auto for the number of times to repeat the image, set the document on the Platen Glass. You cannot use the ADF.
button to set the vertical repeats, then press the OK button.
button to set the horizontal repeats, then press the OK button.
button or the Numeric buttons to specify the number of copies.
The area scanned from the original depends on the enlargement/reduction setting.
Setting Items

Page 338 of 817 pages Making Multiple Copies of an Entire Document (Collated Copy)
Advanced Guide > Printing Using the Operation Panel of the Machine > Copying > Using Useful Copy Functions > Making Multiple Copies of an Entire Document (Collated Copy)
You can obtain sorted printouts when making multiple copies of a multi-paged original.
Collated copy selected.

Collated copy not selected.

Settings for Special Copy
button to select Collated copy, then press the OK button.
button or the Numeric buttons to specify the number of copies.
Load the document in the ADF when using this function. Using this function might cause a reduction in print quality. For better results, print a single copy of the original loaded in the ADF at a time. The number of pages the machine can read varies with the document. If Memory is full appears on the LCD when scanning, reduce the number of document pages to scan and try copying again.

Page 339 of 817 pages Copying Thick Originals Such as Books (Frame Erase)
Advanced Guide > Printing Using the Operation Panel of the Machine > Copying > Using Useful Copy Functions > Copying Thick Originals Such as Books (Frame Erase)
When copying a thick original document such a book, you can make a copy without black margins around the image. Using this function, you can reduce unnecessary ink consumption.

Settings for Special Copy
button to select Frame erase, then press the OK button.
button or the Numeric buttons to specify the number of copies.
Load the document on the Platen Glass when using this function. Close the Document Cover. There may be a narrow black margin that appears around the image. This function removes the dark margins only. If a scanned book is too thin or when the machine is used near a window or in a bright environment, a faint black frame may remain. Also, if the color of an original is dark, the machine cannot distinguish the document color from the shadow and this may cause slight cropping.
Setting Items

Advanced Guide > Printing Using the Operation Panel of the Machine > Copying > Using Useful Copy Functions > Copying on Stickers (Sticker Copy)
You can easily make 16 stickers from 4" x 6" / 101.6 x 152.4 mm photos or graphics using Canon sticker paper.

(A) Platen Glass (Place the document facing down)
Settings for Special Copy
button to select Sticker copy, then press the OK button.
If any layout other than 4 x 4 is selected on the LCD, select 4 x 4 using the
button.
button or the Numeric buttons to specify the number of copies.
Load the document on the Platen Glass when using this function. You can only load one sheet of stickers at a time. You cannot specify the settings other than intensity.
(B) 16 stickers

Advanced Guide > Scanning
Saving Scanned Data on the USB Flash Drive Using the Operation Panel of the Machine
Saving Scanned Data to PC Using the Operation Panel of the Machine
Scanning with the Bundled Application Software
Scanning with Other Application Software
Scanning Images · Other Scanning Methods

Advanced Guide > Scanning > Scanning Images
Scanning Images · Before Scanning · Placing Documents

Advanced Guide > Scanning > Scanning Images > Scanning Images
You can scan images from the machine to a computer without printing them and save them in popular image data, such as JPEG, TIFF, bitmaps, or PDF. You can also save scanned images in a PDF or JPEG data format in the USB flash drive.
Select the scanning method according to your purpose.
Saving Scanned Data on the USB Flash Drive Using the Operation Panel of the Machine
Saving Scanned Data to PC Using the Operation Panel of the Machine
Scanning with the Bundled Application Software
Scanning with Other Application Software

Advanced Guide > Scanning > Scanning Images > Before Scanning
Before scanning images, confirm the following:
Does the original to be scanned meet the requirements for an original to
be set on the Platen Glass or in the ADF? If you save the data to PC, refer to Placing Documents for details.
If you save the data to the USB flash drive, refer to Loading Paper / Originals for details.

Advanced Guide > Scanning > Scanning Images > Placing Documents
Learn how to place documents on the machine's Platen or ADF (Auto Document Feeder). Place documents correctly according to the type of document to be scanned. Otherwise, documents may not be scanned correctly.
Do not place objects on the Document Cover. The objects may fall into the machine when the Document Cover is opened. This may damage the machine.
Placing Documents (ADF (Auto Document Feeder))
Important
Close the Document Cover when scanning. Place documents as described below to allow the machine to detect the document automatically. When scanning by specifying the document size, always align an upper corner of the document with the corner at the arrow of the Platen, regardless of the document type.
When Scanning Photos, Hagaki, Business Cards or CD/DVD
When Scanning Magazines, Newspapers or Text Documents


Place the document face-down on the Platen and align an upper corner of the document with the corner at the arrow of the Platen.
Placing a Single Document
Place the document face-down on the Platen, with 3/8 inches (1 cm) or more space between the edges of the Platen and the document.


Large documents (such as A4 photos) that cannot be placed away from the edges/arrow of the Platen may be saved as PDF files. To save in a format other than PDF, scan by specifying the file format. Reflective CD/DVD labels may not be scanned properly.
Placing Documents (Platen) · Placing Multiple Documents

Allow 3/8 inches (1 cm) or more space between the edges of the Platen and documents, and between documents.

You can place up to 10 documents. Positions of slanted documents (10 degrees or less) are corrected automatically.
Important
Place documents of the same size when scanning two or more documents. When scanning from the ADF (Auto Document Feeder), the supported document sizes are A5 Portrait, B5, A4, Letter and Legal.


Insert the documents face-up until a beep sounds.
Place the documents face-up to scan both sides of the documents.



Page 347 of 817 pages Saving Scanned Data on the USB Flash Drive Using the Operation Panel of...
Advanced Guide > Scanning > Saving Scanned Data on the USB Flash Drive Using the Operation Panel of the Machine
Saving Scanned Data on the USB Flash Drive Using the Operation Panel of the Machine
Saving Scanned Data on the USB Flash Drive Using the Operation Panel of the Machine

Page 348 of 817 pages Saving Scanned Data on the USB Flash Drive Using the Operation Panel of...
Advanced Guide > Scanning > Saving Scanned Data on the USB Flash Drive Using the Operation Panel of the Machine > Saving Scanned Data on the USB Flash Drive Using the Operation Panel of the Machine
Saving Scanned Data on the USB Flash Drive Using the Operation Panel of the Machine
You can save scanned data on the USB flash drive using the Operation Panel.
Do not remove the USB flash drive from the machine under the following conditions:
while scanning is in progress before saving the scanned data For safety reasons, we recommend storing the scanned data saved on a USB flash drive to another media periodically to avoid unexpected accidents. We assume no responsibility for damage or loss of data for whatever reasons even within the warranty period.
Refer to Inserting the USB Flash Drive for how to insert the USB flash drive in the Direct Print Port.
button to select USB flash drive, then press the OK button.

button to select the scan method, then press the OK button.
Refer to Loading paper / Originals for how to load the original on the Platen Glass or in the ADF.
The machine starts scanning and scanned data is saved on the USB flash drive. Remove the original on the Platen Glass or the Document Output Slot after scanning is complete. To remove the USB flash drive after scanning is completed, see Removing the USB Flash Drive .
When you select PDF as the data format, you can scan documents from the Platen Glass continuously. After scanning is complete, select Yes on the confirmation screen. Load the next document on the Platen Glass, then press the Color button for color scanning, or the Black button for black & white scanning. You can save up to 100 pages of images in one PDF file. If the USB flash drive becomes full while scanning images is in progress, only the images already scanned can be saved. You can save up to 999 files of scanned data in both JPEG and PDF data format. The folder and file name of scanned data saved on the USB flash drive is as follows:
Setting Items

Page 349 of 817 pages Saving Scanned Data on the USB Flash Drive Using the Operation Panel of...
Folder name: (file extension: PDF): CANON_SC\DOCUMENT\0001 Folder name: (file extension: JPG): CANON_SC\IMAGE\0001 File name: Running numbers, starting from SCN_0001 File date: Saving on the date and time registered in the machine. For information on how to register the date and time, refer to Setting Up the Machine.
Importing the Scanned Data Saved on the USB Flash Drive to the Computer
You can import the scanned data saved on the USB flash drive to the computer. After scanning the data, connect the USB flash drive to the computer, then import the data using Windows Explorer.
You can import the scanned data saved on the USB flash drive to the computer. After scanning the data, connect the USB flash drive to the computer, then import the data.
Important
Before inserting the USB flash drive:
You may need an extension cable if the USB flash drive cannot be inserted into the Direct Print Port of the machine. For details, ask an electronics store. Depending on the type of USB flash drive, the operation may not be guaranteed. Some USB flash drives with security settings may not be used.
Make sure that the USB flash drive is correctly oriented before inserting it straightforward into the Direct Print Port.

Check if the writing operation is completed on the LCD.
Do not remove the USB flash drive or turn off the power while the machine is operating.
If you use the USB flash drive with the access lamp, refer to the instruction manual supplied with the USB flash drive to check if the writing operation is completed on the USB flash drive.
Hold the USB flash drive and remove it from the machine straightforward.

Advanced Guide > Scanning > Saving Scanned Data on the USB Flash Drive Using the Operation Panel of the Machine > Saving Scanned Data on the USB Flash Drive Using the Operation Panel of the Machine > Setting Items
You can change the scan settings such as the scan size, resolution, or data format.
In Scan mode, press the Settings button repeatedly to switch the item to set. Use the
button to select the item, then press the OK button to set.
The * (asterisk) on the LCD indicates the current setting. The settings of the scan size, resolution, and data format are retained even if the machine is turned off.
Select the size of the original on the Platen Glass or in the ADF.
Ex:

A4/8.5"x11"(LTR)/8.5"x14"/Legal
Some of setting items are not available depending on the country or region of purchase. 8.5"x14" or Legal can be selected only when the scan method has been set to ADF.
Select the resolution for scanning.
Ex:

Ex:

Select the data format of the scanned data.
150dpi/300dpi/600dpi

Page 351 of 817 pages Saving Scanned Data to PC Using the Operation Panel of the Machine
Advanced Guide > Scanning > Saving Scanned Data to PC Using the Operation Panel of the Machine
Saving Scanned Data to PC Using the Operation Panel of the Machine

Page 352 of 817 pages Saving Scanned Data to PC Using the Operation Panel of the Machine
Advanced Guide > Scanning > Saving Scanned Data to PC Using the Operation Panel of the Machine > Saving Scanned Data to PC Using the Operation Panel of the Machine
You can save scanned data to PC using the Operation Panel of the Machine.
Before saving scanned data to PC, confirm the following:
The necessary software (MP Drivers and MP Navigator EX) are installed.
If the software (MP Drivers and MP Navigator EX) are not yet installed, refer to your setup manual.
The machine is connected to a computer correctly.
Do not insert or remove USB cables when scanning images with the machine, or when the computer is in the sleep or standby mode.
EX. MP Navigator EX enables you to specify the response resulting from pressing the Color or Black button on the machine. You can specify the response individually for each event. For details, refer to Selecting a Response to Commands from the Operation Panel Using MP Navigator EX .
Set the Starting application.
If you are using Mac OS X v.10.5.x or Mac OS X v.10.4.x: This operation is not necessary. If you are using Mac OS X v.10.3.9: You need to set MP Navigator EX as the starting application software in Image Capture under Applications of Mac OS X. Select Applications on the Go menu, then double-click the Image Capture icon. Click Options at the lower left of the scanner window, select MP Navigator EX 2 in Application to launch when the scanner button is pressed:, then click OK. To quit Image Capture, select Quit Image Capture on the Image Capture menu.
If Options is not displayed, select Preferences on the Image Capture menu, click Scanner, and click Use TWAIN software whenever possible to clear the option. Then quit Image Capture and restart it.
Refer to Placing Documents for how to load the original on the Platen Glass or in the ADF.
The settings configured from MP Navigator EX apply when scanning. Remove the original on the Platen Glass or the Document Output Slot after scanning is complete.
To specify MP Navigator EX 2.1
If you are using Windows Vista: The program selection screen may be displayed after pressing the Color or Black button. In this case, select MP Navigator EX Ver2.1 and click OK.

Page 353 of 817 pages Saving Scanned Data to PC Using the Operation Panel of the Machine
If you are using Windows XP: The program selection screen may be displayed after pressing the Color or Black button for the first time. In this case, specify MP Navigator EX Ver2.1 as the application software to use, select Always use this program for this action, then click OK. From the next time, MP Navigator EX is automatically started.
If the position or size of an image is not scanned in correctly depending on the type of the original, refer to Scanning Photos and Documents and change the MP Navigator EX Document Type and Document Size settings to match the original being scanned.
MP Navigator EX enables you to edit the scanned images, such as optimizing or trimming.
You can also start application software from MP Navigator EX to edit or print the scanned images.
ScanGear enables you to scan originals with advanced settings such as the resolution.
Scanning with Advanced Settings Using ScanGear (Scanner Driver)
You can use a TWAIN- or WIA- (Windows Vista and Windows XP only) compliant application software and the Control Panel (Windows Vista and Windows XP only) to scan originals with this machine. For details, refer to Other Scanning Methods.
Let's Try Scanning

Advanced Guide > Scanning > Saving Scanned Data to PC Using the Operation Panel of the Machine > Appendix: Various Scan Settings
Specifying how to respond when scanning using the Operation Panel of the machine
Selecting a Response to Commands from the Operation Panel Using MP Navigator EX

Page 355 of 817 pages Selecting a Response to Commands from the Operation Panel Using MP N...
Advanced Guide > Scanning > Saving Scanned Data to PC Using the Operation Panel of the Machine > Appendix: Various Scan Settings > Selecting a Response to Commands from the Operation Panel Using MP Navigator EX
Selecting a Response to Commands from the Operation Panel Using MP Navigator EX
MP Navigator EX enables you to specify the response resulting from pressing the Color Start or Black Start button on the machine. You can specify the response individually for each event.
Starting MP Navigator EX

The Preferences dialog box opens.
The Preferences dialog box can also be opened by clicking Preferences in the One-click Mode screen.

Page 356 of 817 pages Selecting a Response to Commands from the Operation Panel Using MP N...

See the section below for details.
Scanner Button Settings Tab (Save)
The operation will be performed according to the settings when you press the Color Start or Black Start button on the machine.

Advanced Guide > Scanning > Scanning with the Bundled Application Software
What Is MP Navigator EX (Supplied Scanner Software)?
Useful MP Navigator EX Functions
Utilizing Images in MP Navigator EX
MP Navigator EX Screens
Let's Try Scanning

Page 358 of 817 pages What Is MP Navigator EX (Supplied Scanner Software)?
Advanced Guide > Scanning > Scanning with the Bundled Application Software > What Is MP Navigator EX (Supplied Scanner Software)?
MP Navigator EX is an application that enables you to easily scan photos and documents. It is suitable even for beginners.
MP Navigator EX may not start from a button on the machine. In that case, restart the computer. Use the default display font size of the OS. Otherwise, software screens may not appear correctly.
This software allows you to scan multiple documents at one time, or scan images larger than the Platen. You can also save scanned images, attach them to e-mail or print them using the supplied applications.
Main Menus
There are two types of MP Navigator EX Main Menu: Navigation Mode screen and One-click Mode screen.
You can start various tasks from the Navigation Mode screen, including simple scanning, scanning using ScanGear (scanner driver), and enhancing/correcting images.

You can complete from scanning to saving, etc. at one time by simply clicking the corresponding icon in the One-click Mode screen.


Page 359 of 817 pages What Is MP Navigator EX (Supplied Scanner Software)?
Use the Scan/Import window to scan photos and documents.

Use the View & Use window to select what you want to do with the scanned images.


Advanced Guide > Scanning > Scanning with the Bundled Application Software > Let's Try Scanning
Try scanning using MP Navigator EX.
Starting MP Navigator EX
Starting MP Navigator EX
Scanning documents, photos, magazines, etc. from the Platen
Scanning Photos and Documents
Scanning two or more photos (small documents) at one time
Scanning Multiple Documents at One Time
Scanning multiple documents at one time from the ADF (Auto Document Feeder)
Scanning Multiple Documents at One Time from the ADF (Auto Document Feeder)
Scanning images larger than the Platen
Scanning Images Larger than the Platen (Stitch Assist)
Scanning easily according to purpose (scan and save, attach to e-mail, etc.)
Easy Scanning with One-click

Advanced Guide > Scanning > Scanning with the Bundled Application Software > Let's Try Scanning > Starting MP Navigator EX
1. Double-click
Canon MP Navigator EX 2.1 icon on the desktop.
MP Navigator EX starts.
Alternatively, from the Start menu, select (All) Programs > Canon Utilities > MP Navigator EX 2.1 > MP Navigator EX 2.1.
at the bottom left of the screen.

The One-click Mode screen appears.

Select the Show this window at startup checkbox in the Navigation Mode screen to always open the Navigation Mode screen at startup. If this checkbox is not selected, the last used screen appears at startup.

Advanced Guide > Scanning > Scanning with the Bundled Application Software > Let's Try Scanning > Scanning Photos and Documents
Scan photos and documents placed on the Platen.
Starting MP Navigator EX


When you select Magazine(Color), the Descreen function will be enabled and scanning takes longer than usual. To disable the Descreen function, deselect the Descreen checkbox in the Scan Settings dialog box. Select Text(OCR) to extract the text in the image and convert to editable text data using MP Navigator EX.
Placing Documents

When setting is completed, click OK.
Scan Settings Dialog Box (Photos/Documents)
When scanning a large document (such as an A4 photo), align its corner with the corner at the arrow of the platen and specify the document size in the Scan Settings dialog box.

Scanning starts.
When scanning is completed, the Scan Complete dialog box opens. Select Scan or Exit. Select Scan to scan the next document, or select Exit to end.
The scanned images appear in the Thumbnail window.

Use Edit Tools to rotate images, select a part of an image, etc.
See the Edit Tools in "Photos/Documents (Platen) Screen (Scan/Import Window) " for details.
First select images to edit. (Selected images are outlined in orange.) Drag the mouse or use Shift + arrow keys to select multiple images.

Saving as PDF Files
Saving

Advanced Guide > Scanning > Scanning with the Bundled Application Software > Let's Try Scanning > Scanning Multiple Documents at One Time
You can scan two or more photos (small documents) at one time by setting Document Size to Auto Detect (Multiple Documents) in the Scan Settings dialog box of MP Navigator EX.
The following types of documents cannot be cropped correctly. - Documents smaller than 1.18 inches (3 cm) square - Photos that have been cut to various shapes The following types of documents may not be cropped correctly. In that case, start ScanGear (scanner driver), then adjust the cropping frame on the Advanced Mode tab and scan again. - Photos that have a whitish border - Documents printed on white paper, hand-written text, business cards, etc. - Thin documents - Thick documents
Scanning in Advanced Mode
Starting MP Navigator EX
Placing Documents

Select Auto Detect (Multiple Documents) for Document Size.
When setting is completed, click OK.
Scan Settings Dialog Box (Photos/Documents)

Multiple documents are scanned at one time.
When scanning is completed, the Scan Complete dialog box opens. Select Scan or Exit. Select Scan to scan the next document, or select Exit to end.

The scanned images appear in the Thumbnail window.

Use Edit Tools to rotate images, select a part of an image, etc.
See the Edit Tools in "Photos/Documents (Platen) Screen (Scan/Import Window) " for details.
First select images to edit. (Selected images are outlined in orange.) Drag the mouse or use Shift + arrow keys to select multiple images.
Saving as PDF Files
If you want to preview the images before scanning, start ScanGear (scanner driver) and use the Advanced Mode tab.
Scanning Multiple Documents at One Time in Advanced Mode
Saving

Page 369 of 817 pages Scanning Multiple Documents at One Time from the ADF (Auto Document F...
Advanced Guide > Scanning > Scanning with the Bundled Application Software > Let's Try Scanning > Scanning Multiple Documents at One Time from the ADF (Auto Document Feeder)
Place multiple documents on the ADF (Auto Document Feeder) and scan at one time.
Starting MP Navigator EX

Placing Documents (ADF (Auto Document Feeder))
To scan only the front side of each document, select a simplex type such as Color Document(Simplex).
To scan the front side then the back side of each document, select a duplex type such as Color Document(Duplex).


Page 370 of 817 pages Scanning Multiple Documents at One Time from the ADF (Auto Document F...
Click Orientation... to specify the orientation of the documents to be scanned. In the displayed dialog box, you can specify the Original Orientation and Binding Location. How to place the documents when scanning the back sides depends on the Binding Location.
When setting is completed, click OK.
Scan Settings Dialog Box (Stack of Documents (ADF))


Scanning starts.
When a duplex type is selected for Document Type, the Manual Duplex Scanning dialog box opens after scanning. Continue to scan the back sides of the documents.
When a simplex type is selected for Document Type, the Scan Complete dialog box opens after scanning. Skip ahead to Step 8.
When Short Edge is Selected for the Stapling Side in Orientation...
Place the documents without changing the orientation of the output documents.

Page 371 of 817 pages Scanning Multiple Documents at One Time from the ADF (Auto Document F...

When Long Edge is Selected for the Stapling Side in Orientation...
Place the documents after rotating the output documents 180 degrees.

Scanning starts.
Select Scan to scan the next document, or select Exit to end.
The scanned images appear in the Thumbnail window.

Use Edit Tools to rotate images, select a part of an image, etc.
See the Edit Tools in "Stack of Documents (ADF) Screen (Scan/Import Window) " for details.

Page 372 of 817 pages Scanning Multiple Documents at One Time from the ADF (Auto Document F...
First select images to edit. (Selected images are outlined in orange.) Drag the mouse or use Shift + arrow keys to select multiple images.
Saving as PDF Files
Saving

Page 373 of 817 pages Scanning Images Larger than the Platen (Stitch Assist)
Advanced Guide > Scanning > Scanning with the Bundled Application Software > Let's Try Scanning > Scanning Images Larger than the Platen (Stitch Assist)
Stitch Assist allows you to scan the left and right halves of a large document separately and combine the scanned images back into one image. You can scan documents that are up to twice as large as the Platen.
Starting MP Navigator EX
You can complete from scanning to saving, etc. at one time by simply clicking the corresponding icon in the One-click Mode screen. Stitch Assist is available from the One-click Mode screen as well, by changing the document size. Click the corresponding icon and select Stitch Assist for Document Size. Then skip ahead to Step 5.

Page 374 of 817 pages Scanning Images Larger than the Platen (Stitch Assist)
Select Stitch Assist for Document Size, then specify the scanning resolution as required.
When setting is completed, click OK.
Scan Settings Dialog Box (Photos/Documents)


The Stitch-assist window opens.


Page 375 of 817 pages Scanning Images Larger than the Platen (Stitch Assist)
The left half of the document is scanned and appears in the Stitch-assist window.

The right half of the document is scanned.
Use the icons to swap the left and right halves, rotate the image 180 degrees or enlarge/reduce the image.

(Swap Left & Right)
Swaps the left and right halves.
This function is not available while the image is enlarged/reduced.
Rotates right half of the image 180 degrees.
This function is not available while the image is enlarged/reduced.
Rotate 180°

Page 376 of 817 pages Scanning Images Larger than the Platen (Stitch Assist)
Enlarges the displayed image.
Reduces the displayed image.
Enlarges/reduces the image to display it full-screen.
Enlarge/Reduce does not affect the actual size of the scanned image. When the document is scanned upside down, the image displayed in the Stitch-assist window will also be upside down. Click Rotate 180° to rotate the image to the correct orientation. You can drag the right half of the image from right to left or up and down to adjust the position. If the left and right halves do not match due to a slanted document, place the document correctly and click Back, then scan again.

The combined image appears in the Thumbnail window.
When scanning is completed, the Scan Complete dialog box opens. Select Scan or Exit. Select Scan to scan the next document, or select Exit to end.

(Enlarge) · (Reduce) · (Full-screen)

Page 377 of 817 pages Scanning Images Larger than the Platen (Stitch Assist)
Saving as PDF Files
Saving

Advanced Guide > Scanning > Scanning with the Bundled Application Software > Let's Try Scanning > Easy Scanning with One-click
You can complete from scanning to saving, etc. at one time by simply clicking the corresponding icon.
Starting MP Navigator EX
The MP Navigator EX Navigation Mode screen or One-click Mode screen appears.
Skip ahead to Step 4 if One-click Mode screen is open.
Placing Documents · Navigation Mode Screen · One-click Mode Screen


Custom Scan with One-click Tab
Scanning starts.
One-click Mode Screen

Advanced Guide > Scanning > Scanning with the Bundled Application Software > Useful MP Navigator EX Functions
With MP Navigator EX, you can correct/enhance scanned images beautifully, and search saved images quickly.
Adjusting color characteristics such as brightness and contrast
Searching for lost images
Classifying and sorting images
Classifying Images into Categories

Advanced Guide > Scanning > Scanning with the Bundled Application Software > Useful MP Navigator EX Functions > Correcting/Enhancing Images Automatically
MP Navigator EX will analyze and correct/enhance scanned images automatically.
See "Let's Try Scanning" to scan images into MP Navigator EX. You can also select images saved on a computer.
Opening Images Saved on a Computer

The Correct/Enhance Images window opens.
The Correct/Enhance Images window can also be opened by clicking
(Image Correction/ Enhancement) on the Toolbar or in the Zoom in dialog box. In that case, only the target image (outlined in orange) can be corrected/enhanced.
The selected image appears in Preview.


If you selected only one image in the View & Use window, the thumbnail list does not appear and only the preview image appears.

Analyzes the image and makes suitable corrections automatically.
Sharpens out-of-focus faces.
Enhances skin beautifully by removing blemishes and wrinkles.
Once image is corrected with Auto Photo Fix and saved, it cannot be corrected again with Auto Photo Fix. Auto Photo Fix may not be available for images edited using an application, digital camera, etc. manufactured by other companies.
The Face Sharpener and Digital Face Smoothing effect levels can be changed using the slider that appears by clicking the corresponding buttons.
Auto Photo Fix · Face Sharpener · Digital Face Smoothing

The entire image is corrected/enhanced automatically and
(Correct/Enhance) appears on the upper left of the thumbnail and preview image.
Click Reset Selected Image to undo the correction/enhancement. Select the Apply to all images checkbox to correct/enhance all selected images.
You can save corrected/enhanced images as new files.
To save only the images you like, select them and click Save Selected Image. To save all images, click Save All Corrected Images. The file format of corrected/enhanced images is JPEG/Exif. Adobe RGB images are saved as sRGB images.
The corrections/enhancements will be lost if you exit before saving corrected/enhanced images.

Advanced Guide > Scanning > Scanning with the Bundled Application Software > Useful MP Navigator EX Functions > Correcting/Enhancing Images Manually
You can correct/enhance scanned images manually.
See "Let's Try Scanning" to scan images into MP Navigator EX. You can also select images saved on a computer.
Opening Images Saved on a Computer
The Correct/Enhance Images window opens.
The Correct/Enhance Images window can also be opened by clicking
(Image Correction/ Enhancement) on the Toolbar or in the Zoom in dialog box. In that case, only the target image (outlined in orange) can be corrected/enhanced.
The selected image appears in Preview.

If you selected only one image in the View & Use window, the thumbnail list does not appear and only the preview image appears.

Brightens dark faces in backlit photos.
Sharpens out-of-focus faces.
Enhances skin beautifully by removing blemishes and wrinkles.
Removes moles.
Move the cursor over the image. The shape of the cursor changes to
(Cross).


The portion in and around the selected area is corrected/enhanced and
(Correct/Enhance) appears on the upper left of the thumbnail.
For Face Brightener, Face Sharpener and Digital Face Smoothing, you can drag to rotate the rectangle. Click Undo to undo the latest correction/enhancement. The Face Brightener, Face Sharpener and Digital Face Smoothing effect levels can be changed using the slider that appears by clicking the corresponding buttons. Click Reset Selected Image to undo the correction/enhancement.
You can save corrected/enhanced images as new files.
To save only the images you like, select them and click Save Selected Image. To save all images, click Save All Corrected Images. The file format of corrected/enhanced images is JPEG/Exif.
The corrections/enhancements will be lost if you exit before saving corrected/enhanced images.

Advanced Guide > Scanning > Scanning with the Bundled Application Software > Useful MP Navigator EX Functions > Adjusting Images
You can make fine adjustments to the overall brightness, contrast, etc. of images.
See "Let's Try Scanning" to scan images into MP Navigator EX. You can also select images saved on a computer.
Opening Images Saved on a Computer
The Correct/Enhance Images window opens.
The Correct/Enhance Images window can also be opened by clicking
(Image Correction/ Enhancement) on the Toolbar or in the Zoom in dialog box. In that case, only the target image (outlined in orange) can be corrected/enhanced.
The selected image appears in Preview.

If you selected only one image in the View & Use window, the thumbnail list does not appear and only the preview image appears.


Brightness

Adjusts the overall image brightness. Adjust the brightness when the image is too dark or too bright. Move the slider to the left to darken and right to brighten the image.
Adjusts the contrast of the image. Adjust the contrast when the image is flat due to lack of contrast. Move the slider to the left to decrease and right to increase the contrast of the image.
Emphasizes the outline of the subjects to sharpen the image. Adjust the sharpness when the photo is out of focus or text is blurred. Move the slider to the right to sharpen the image.
Blurs the outline of the subjects to soften the image. Move the slider to the right to soften the image.
Removes show-through of text from the reverse side or removes the base color. Adjust the show- through level to prevent text on the reverse side of thin document or the base color of the document from appearing on the image. Move the slider to the right to increase the show-through removal effect.
Click Defaults to reset all adjustments.
You can save adjusted images as new files.
To save only the images you like, select them and click Save Selected Image. To save all images, click Save All Corrected Images. The file format of adjusted images is JPEG/Exif.
The adjustments will be lost if you exit before saving adjusted images.

Advanced Guide > Scanning > Scanning with the Bundled Application Software > Useful MP Navigator EX Functions > Searching Images
In the View & Use window of the Navigation Mode screen, you can search images saved on your computer and open them in MP Navigator EX. Opened images can be printed, edited, etc.
Search images in My Box (Scanned/Imported Images), Recently Saved Images or a selected folder and its subfolders. You can also specify folder and search in Specify Folder. See "Starting MP Navigator EX" to start MP Navigator EX.

(Text box) on the Toolbar, enter a word or phrase included in the file
name, Exif information or PDF text of the image you want to search for, then click
(Search button). For Exif information, text in Maker, Model, Description and User Comment is searched.
Click Search on the left of the screen to open search options. Enter information of the image you want to search for, then click Start Search.
In


If you know where to look for, select the drive, folder or network from Specify Folder.
If you know the file name, enter it.
A word or phrase in the file
Enter a word or phrase included in the items selected in More Advanced Options.
For PDF files, you can only search for those created with MP Navigator EX. You cannot search PDF files created or edited in other applications. Also, searching PDF files is available only when keyword search is set. For details of creating PDF files that enables keyword search, see "PDF Settings Dialog Box ." Password-protected PDF files cannot be searched.
You can search for images by category.
To search for images that have been updated in a specific time period, enter the first and last dates of the period.
To search for images captured in a specific time period, enter the first and last dates of the period.
Captured date is the date and time of data creation, which are included in the document's Exif information.
A word or phrase in the file
In A word or phrase in the file, select the items to search. If you select the Exif information checkbox, text in Maker, Model, Description and User Comment is searched. If you select the PDF text checkbox, text in PDF files is searched.

Text in password-protected PDF files cannot be searched.
Select this checkbox to search subfolders.
Select this checkbox to match case.
Searches for files that meet all the specified criteria.
Searches for files that meet any of the specified criteria.
Starts search.
View & Use Window

Advanced Guide > Scanning > Scanning with the Bundled Application Software > Useful MP Navigator EX Functions > Classifying Images into Categories
Display images scanned with MP Navigator EX by category. You can classify unclassified images automatically, and also create custom categories. You can drag and drop an image to move it from one category to another.
Classification information on MP Navigator EX 2.0 is transferred to MP Navigator EX 2.1 upon initial startup. After the initial startup, the classification information on MP Navigator EX 2.0 cannot be transferred.
See "Let's Try Scanning" to scan images into MP Navigator EX. You can also select images saved on a computer.
Opening Images Saved on a Computer
(Sort by), select Categories.
Images are automatically sorted by category and appear in the Thumbnail window.

Images are sorted into the following categories.

Custom categories: Displays your custom categories.
To create custom categories, see " Creating Custom Categories."
Unclassified: Displays images that have not yet been classified.
Click Classify Images to classify images displayed in Unclassified automatically. Click Cancel to stop. Classification may take time if there are many images to classify.
Even if you classify images saved in removable media such as USB flash drive and external hard disk, the classification information will be deleted once you remove the media. From the next time, the images are classified to Unclassified. Images cannot be classified when Recently Saved Images is selected in the View & Use window.
Some images may not be detected correctly and thus may be classified into wrong categories. In that case, drag and drop the image to the correct category. Images saved in network folders may not be classified. You can search for images by category. See " Searching Images" for details.
The Edit Custom Categories dialog box opens.

The Add Category dialog box opens.

You can create up to 20 custom categories. Up to 50 single-byte characters can be used for a category name. Double-click a created category to open the Change Category Name dialog box in which you can change the category name. Select a custom category and click Delete to delete it.
View & Use Window

Advanced Guide > Scanning > Scanning with the Bundled Application Software > Utilizing Images in MP Navigator EX
You can scan images using MP Navigator EX and edit or print the saved images.
See the corresponding sections below for details on saving scanned images.
Saving scanned images to computer
Saving scanned image as PDF Files
Saving as PDF Files
See the corresponding sections below for details on using images/files.
Creating/editing PDF files from scanned images
Printing multiple scanned images at one time or printing at specific size, quality, etc.
Sending scanned images via e-mail
Correcting/enhancing scanned images or converting them to text
Setting passwords for created PDF files
Setting Passwords for PDF Files
Opening/Editing Password-protected PDF Files

Advanced Guide > Scanning > Scanning with the Bundled Application Software > Utilizing Images in MP Navigator EX > Saving
Save images scanned with MP Navigator EX to a computer.

Specify the destination folder, file name and file type.

You cannot select JPEG/Exif when Document Type is Text(OCR), Text(Simplex) or Text(Duplex).
By default, the following folders are specified as the destination folders. Windows Vista: MP Navigator EX folder in Picture folder Windows XP: MP Navigator EX folder in My Pictures folder Windows 2000: MP Navigator EX folder in My Pictures folder
Scanned images are saved according to the settings.
To further use/edit the scanned images on MP Navigator EX, click Open saved location in the Save Complete dialog box.
Save Dialog Box


Advanced Guide > Scanning > Scanning with the Bundled Application Software > Utilizing Images in MP Navigator EX > Saving as PDF Files
Save images scanned with MP Navigator EX as PDF files.

Specify the file type, file name and destination folder.
Save as PDF file Dialog Box

Select from the following PDF file types:
Save each of the selected images as a separate PDF file.
Save multiple images in one PDF file.
PDF(Multiple Pages)

PDF(Multiple Pages) is displayed when multiple images are selected.
Add the scanned images to a PDF file. The images are added to the end of the PDF file. You cannot rearrange the pages of the PDF file to which the images are added.
Images can only be added to PDF files created with MP Navigator EX. You cannot specify PDF files created with other applications. PDF files edited in other applications cannot be specified as well. If a password-protected PDF file is edited, the passwords will be deleted. Reset the passwords.
By default, the following folders are specified as the destination folders. Windows Vista: MP Navigator EX folder in Picture folder Windows XP: MP Navigator EX folder in My Pictures folder Windows 2000: MP Navigator EX folder in My Pictures folder You can set passwords for PDF files.
Setting Passwords for PDF Files
Scanned images are saved according to the settings.
To further use/edit the scanned images on MP Navigator EX, click Open saved location in the Save Complete dialog box.

Advanced Guide > Scanning > Scanning with the Bundled Application Software > Utilizing Images in MP Navigator EX > Creating/Editing PDF Files
Create/edit PDF files using MP Navigator EX. After scanning documents and saving them, open the View & Use window to create PDF files and add/delete pages, rearrange the page order, etc.

See "Let's Try Scanning" to scan images into MP Navigator EX. You can also select images saved on a computer.
Opening Images Saved on a Computer
You can select PDF, JPEG, TIFF and BMP files.
For PDF files, you can only edit those created with MP Navigator EX. You cannot edit PDF files created with other applications. PDF files edited in other applications cannot be edited as well.
If a password-protected PDF file is selected, you will be prompted to enter the password.
Opening/Editing Password-protected PDF Files
To add an existing file, click Add Page and select the file. To delete a page, select it and click Delete Selected Pages.


You can add PDF, JPEG, TIFF and BMP files. When adding a password-protected PDF file, you will be prompted to enter the password.
Use the icons to rearrange the order. Alternatively, drag and drop the thumbnail to the target location.
See "Create/Edit PDF file Window " for details on the Create/Edit PDF file window.
The Save as PDF file dialog box opens.
Save as PDF file Dialog Box
You cannot save images scanned at 10501 pixels or more in the vertical and horizontal directions. If a password-protected PDF file is edited, the passwords will be deleted. Reset the passwords in the Save as PDF file dialog box.
Setting Passwords for PDF Files
Images are saved according to the settings.
You can open PDF files created with MP Navigator EX in an associated application and edit or print them. This is available only when an application that can open PDF files is installed.
For PDF files, you can only select those created with MP Navigator EX. You cannot select PDF files created with other applications. PDF files edited in other applications cannot be selected as well.
The application associated with the .pdf file extension by the operating system starts.
Password-protected PDF files cannot be opened in applications not supporting PDF security.

For details, refer to the application's manual.
In some applications, the commands (print, edit, etc.) restricted by Permissions Password may differ from those in MP Navigator EX.

Advanced Guide > Scanning > Scanning with the Bundled Application Software > Utilizing Images in MP Navigator EX > Printing Documents
You can print multiple scanned images at one time, print at specific quality, etc. using MP Navigator EX.
See "Let's Try Scanning" to scan images into MP Navigator EX. You can also select images saved on a computer.
Opening Images Saved on a Computer

If a password-protected PDF file is selected, you will be prompted to enter the password.
Opening/Editing Password-protected PDF Files
In the displayed dialog box, specify print count, quality, scale, etc.
Print Document Dialog Box


At normal-size (100%), some images may be printed small or with some portions cropped. In that case, select Auto to resize the print in proportion to the paper size.
Printing starts.
When printing a multiple-page PDF file via Print Document, printing may take time depending on your computer. In that case, follow these steps and change settings. 1. From the Start menu, select Control Panel. 2. Click Printers. 3. Right-click the icon of your printer and click Properties. The printer properties dialog box opens. 4. Click the Advanced tab. 5. Select Spool print documents so program finishes printing faster. 6. Select Start printing after last page is spooled. 7. After printing, return the setting on the Advanced tab to Start printing immediately. To cancel while spooling, click Cancel. To cancel while printing, select the printer icon on the taskbar and click Cancel Printing.

Advanced Guide > Scanning > Scanning with the Bundled Application Software > Utilizing Images in MP Navigator EX > Printing Photos
You can print photos using MP Navigator EX or an application that accompanies the machine. After scanning documents and saving them, open the View & Use window to select how you want to print the photos.

See "Let's Try Scanning" to scan images into MP Navigator EX. You can also select images saved on a computer.
Opening Images Saved on a Computer
You can use Easy-PhotoPrint EX to print scanned photos at high quality or to layout and print images.
Easy-PhotoPrint EX starts. See "Printing Photos" for details.
If Easy-PhotoPrint EX is not installed, print with MP Navigator EX.
In the displayed dialog box, specify paper size, print count, etc.

Print Photo Dialog Box

Printing starts.
To cancel while spooling, click Cancel. To cancel while printing, select the printer icon on the taskbar and click Cancel Printing.

Advanced Guide > Scanning > Scanning with the Bundled Application Software > Utilizing Images in MP Navigator EX > Sending via E-mail
Send scanned images via e-mail.
MP Navigator EX is compatible with the following e-mail software programs: - Windows Mail (Windows Vista) - Outlook Express (Windows XP/Windows 2000) - Microsoft Outlook (If an e-mail software program does not operate properly, check that the program's MAPI is enabled. To enable MAPI, refer to the manual of the e-mail software program.)
See "Let's Try Scanning" to scan images into MP Navigator EX. You can also select images saved on a computer.
Opening Images Saved on a Computer

Specify the destination folder and file name.
Send via E-mail Dialog Box


You can select a compression type when sending JPEG images via e-mail. Click Set... to open a dialog box and select a compression type from High(Low Compression), Standard or Low(High Compression).
Files are saved according to the settings, and the e-mail software program starts.
For details, refer to the manual of the e-mail software program.

Advanced Guide > Scanning > Scanning with the Bundled Application Software > Utilizing Images in MP Navigator EX > Editing Files
You can edit images or convert them to text using MP Navigator EX or an application that accompanies the machine. After scanning documents and saving them, open the View & Use window to select what you want to do with the images.

See "Let's Try Scanning" to scan images into MP Navigator EX. You can also select images saved on a computer.
Opening Images Saved on a Computer
You can correct/enhance images in the Correct/Enhance Images window.
The Correct/Enhance Images window opens.
See "Correct/Enhance Images Window" for details on the Correct/Enhance Images window. See the corresponding sections below for correcting/enhancing images.
Scan text in scanned magazines and newspapers and display it in Notepad (included with Windows).
Correcting/Enhancing Images Automatically · Correcting/Enhancing Images Manually

PDF files cannot be converted to text.
Only text written in languages that can be selected on the General tab can be extracted to Notepad (included with Windows). Click Set... on the General tab and specify the language according to the language of the document to be scanned. When scanning multiple documents, you can collect the extracted text into one file.
General Tab Text displayed in Notepad (included with Windows) is for guidance only. Text in the image of the following types of documents may not be detected correctly. - Documents containing text with font size outside the range of 8 points to 40 points (at 300 dpi) - Slanted documents - Documents placed upside down or documents with text in the wrong orientation (rotated characters) - Documents containing special fonts, effects, italics, or hand-written text - Documents with narrow line spacing - Documents with colors in the background of text - Documents containing multiple languages

Advanced Guide > Scanning > Scanning with the Bundled Application Software > Utilizing Images in MP Navigator EX > Setting Passwords for PDF Files
Set passwords for opening, editing and printing PDF files.
You can set two passwords: one for opening the file and one for editing/printing it.
In Windows 2000, Internet Explorer 5.5 Service Pack 2 or later is required to use this function. You will not be able to open/edit the file if you forget the password. Record your passwords in a safe place for future reference. Password-protected PDF files cannot be opened in applications not supporting PDF security. In some applications, the commands (print, edit, etc.) restricted by Permissions Password may differ from those in MP Navigator EX. Password-protected PDF files cannot be searched by text from the View & Use Window.
The Save as PDF file dialog box opens.
Passwords cannot be set when images are automatically saved after scanning, such as when scanning from the One-click Mode screen or scanning using the Operation Panel of the machine.
See "Let's Try Scanning" to scan images. See "Creating/Editing PDF Files" to create PDF files from existing images or to edit files.



The Password Security -Settings dialog box opens.
You can also open the Password Security -Settings dialog box by clicking Set..., then selecting Password Security for Security in the PDF Settings dialog box.


Up to 32 single-byte alphanumeric characters can be used for the password. Passwords are case sensitive. Select both checkboxes to set both Document Open Password and Permissions Password. You cannot use the same password for both.
The Confirm Document Open Password or Confirm Permissions Password dialog box opens.



The Save as PDF file dialog box returns.
If you close the Save as PDF file dialog box without clicking Save, the settings in the Password Security -Settings dialog box will be deleted. Passwords are deleted once the file is edited. Reset the passwords when saving edited files.
If you set the passwords via the PDF Settings dialog box, the PDF Settings dialog box returns. Click OK. The Save as PDF file dialog box returns.
Files are saved according to the settings.
Opening/Editing Password-protected PDF Files

Advanced Guide > Scanning > Scanning with the Bundled Application Software > Utilizing Images in MP Navigator EX > Opening/Editing Password-protected PDF Files
Enter a password to open or edit/print password-protected PDF files.
Password entry method varies by operation. The following procedures are examples only.
You can open, edit or print only PDF files whose passwords were set with MP Navigator EX. You cannot edit PDF files edited in other applications or whose passwords were set with other applications. Only MP Navigator EX version 1.1 and 2.0 or later supports opening, editing and printing password-protected PDF files. In Windows 2000, Internet Explorer 5.5 Service Pack 2 or later is required to open, edit or print password-protected PDF files. Passwords are case sensitive.
Zoom in. Alternatively, double-click the PDF file.

Only the Document Open Password will be required. The Permissions Password will not be required. If the Zoom in dialog box with a lock icon opens, click Enter Password.



The PDF file opens in the Zoom in dialog box.
To reopen the file after closing the Zoom in dialog box, re-enter the password.

In the Password dialog box, you will be prompted to enter a password.


If the Document Open Password is set as well, the Document Open Password will be required, then the Permissions Password will be required.
The corresponding dialog box opens.
If a password-protected PDF file is edited, the passwords will be deleted. Reset the passwords.
Setting Passwords for PDF Files
Setting Passwords for PDF Files

Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens
Learn about the screens and functions of MP Navigator EX.
Photos/Documents (Platen) Screen (Scan/Import Window)
Scan Settings Dialog Box (Photos/Documents) Save Dialog Box Save as PDF file Dialog Box
Stack of Documents (ADF) Screen (Scan/Import Window)
Scan Settings Dialog Box (Stack of Documents (ADF))
View & Use Window
Create/Edit PDF file Window Print Document Dialog Box Print Photo Dialog Box Send via E-mail Dialog Box Correct/Enhance Images Window
Save Dialog Box (One-click Mode Screen)
Scanner Button Settings Tab (Save)

Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Navigation Mode Screen
This is one of the startup screens of MP Navigator EX.
Point to the icon at the top of the screen to display each tab. Use each tab depending on what you want to do.
Scan Photos and Documents.
Scan/Import Documents or Images Tab
You can open images saved on a computer and print them or attach them to e-mail. You can also edit them using an application that accompanies the machine.
View & Use Images on your Computer Tab
You can complete from scanning to saving, etc. at one time by simply clicking the corresponding icon.
Custom Scan with One-click Tab
Switches to One-click Mode screen. In the One-click Mode screen, you can complete from scanning to saving, etc. at one time by simply clicking the corresponding icon.
Show this window at startup
Select this checkbox to open the Main Menu at startup. If this checkbox is not selected, the last used screen appears.
The Preferences dialog box opens. In the Preferences dialog box, you can make advanced settings to MP Navigator EX functions.
Opens this guide.

Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Scan/ Import Documents or Images Tab
Point to Scan/Import in the Navigation Mode screen to display the Scan/Import Documents or Images tab.
Scan Photos and Documents.

Opens the Scan/Import window. Scan photos and documents placed on the Platen.
Photos/Documents (Platen) Screen (Scan/Import Window)
Stack of Documents (ADF)
Opens the Scan/Import window. Place multiple documents on the ADF (Auto Document Feeder) and scan at one time.
Stack of Documents (ADF) Screen (Scan/Import Window)
Switches to One-click Mode screen. In the One-click Mode screen, you can complete from scanning to saving, etc. at one time by simply clicking the corresponding icon.
Show this window at startup
Select this checkbox to open the Main Menu at startup. If this checkbox is not selected, the last used screen appears.
The Preferences dialog box opens. In the Preferences dialog box, you can make advanced settings to MP Navigator EX functions.
Opens this guide.

Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > View & Use Images on your Computer Tab
Point to View & Use in the Navigation Mode screen to display the View & Use Images on your Computer tab.
You can open images saved on a computer and print them or attach them to e-mail. You can also edit them using an application that accompanies the machine.

My Box (Scanned/Imported Images)
Opens the View & Use window with My Box (Scanned/Imported Images) selected. You can open and use images saved in My Box. My Box is a specific folder for saving images scanned with MP Navigator EX.
The following folders are specified by default. Windows Vista: MP Navigator EX folder in Picture folder Windows XP: MP Navigator EX folder in My Pictures folder Windows 2000: MP Navigator EX folder in My Pictures folder
Opens the View & Use window with Specify Folder selected. You can open and use images saved in specific folders.
Opens the View & Use window with Recently Saved Images selected. You can open and use "Scanned/Imported Images" and images that have been "Attached to E-mail" or "Sent to Application" recently.
View & Use Window
Switches to One-click Mode screen. In the One-click Mode screen, you can complete from scanning to saving, etc. at one time by simply clicking the corresponding icon.
Show this window at startup
Select this checkbox to open the Main Menu at startup. If this checkbox is not selected, the last used screen appears.
The Preferences dialog box opens. In the Preferences dialog box, you can make advanced settings to MP Navigator EX functions.

Opens this guide.
Opening Images Saved on a Computer
(Guide)

Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Custom Scan with One-click Tab
Point to One-click in the Navigation Mode screen to display the Custom Scan with One-click tab.
You can complete from scanning to saving, etc. at one time by simply clicking the corresponding icon.
Scan and save documents. Document type is automatically detected. File format is automatically set. Files are saved to a computer. When you click this icon, the Save dialog box opens and you can specify the scan/save settings.
Save Dialog Box (One-click Mode Screen)
Save as PDF file
Scan documents and save them as PDF files. When you click this icon, the PDF dialog box opens and you can specify the scan/save and application settings.
Scan documents or photos and attach them to e-mail. When you click this icon, the Mail dialog box opens and you can specify the scan/save and e-mail software program settings.
Scan text documents then extract text in the image and display it in Notepad (included with Windows). When you click this icon, the OCR dialog box opens and you can specify the scan/save settings.
For further procedures, refer to the application's manual.
Scan documents and open them in a specified application. Document type is automatically detected. When you click this icon, the Custom dialog box opens and you can specify the scan/save and application settings.
For further procedures, refer to the application's manual.
Start scanning by clicking the button
Select this checkbox and click an icon to start scanning immediately.

Switches to One-click Mode. The One-click Mode screen appears.
Show this window at startup
Select this checkbox to open the Main Menu at startup. If this checkbox is not selected, the last used screen appears.
The Preferences dialog box opens. In the Preferences dialog box, you can make advanced settings to MP Navigator EX functions.
Opens this guide.
The following restrictions apply when you scan with Document Type set to Auto Mode in the Save or Custom dialog box. When you want to convert text in the scanned image to text data, specify Document Type (do not select Auto Mode).
Easy Scanning with One-click

Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Photos/ Documents (Platen) Screen (Scan/Import Window)
Point to Scan/Import in the Navigation Mode screen and click Photos/Documents (Platen).
Open this window to scan documents from the Platen.

(1) Settings and Operation Buttons
(4) Selected Images Area
Click this when you want to open images and PDF files saved on your computer. The View & Use window opens.
View & Use Window
Displays the screen for scanning photos, documents, magazines and other printed materials.
Stack of Documents (ADF)
Click this when you want to scan multiple documents at one time from the ADF (Auto Document Feeder). The screen for scanning from the ADF appears.
Stack of Documents (ADF) Screen (Scan/Import Window)
Select the type of document to be scanned. Scanning photos: Color Photo or Black and White Photo Scanning text documents: Color Document, Black and White Document or Text(OCR) Scanning magazines: Magazine(Color)
You cannot select Document Type if the Use the scanner driver checkbox is selected.
Specify...
Specify the document size, resolution, and other advanced scan settings.
Scan Settings Dialog Box (Photos/Documents)

Specify... is not available if the Use the scanner driver checkbox is selected.
Use the scanner driver
Select this checkbox when you want to scan with ScanGear (scanner driver). Use ScanGear (scanner driver) to correct images and adjust colors when scanning.
Scanning starts.
This button changes to Open Scanner Driver when you select the Use the scanner driver checkbox.
ScanGear (scanner driver) starts. See "ScanGear (Scanner Driver) Screens" for details on ScanGear (scanner driver) screens.
This button changes to Scan when you deselect the Use the scanner driver checkbox.
Delete all images in the Thumbnail window.
Images not saved on a computer will be deleted. To keep important images, use Save or other methods to save them to a computer before clicking Clear.
Save the selected images. Click to open the Save dialog box and specify the save settings.
Save as PDF file
Save the selected images as PDF files. Click to open the Save as PDF file dialog box and specify the save settings.
Save as PDF file Dialog Box
Jump to Main Menu
Jumps to the Main Menu.
The Preferences dialog box opens. In the Preferences dialog box, you can make advanced settings to MP Navigator EX functions.
Opens this guide.
Selects all images in the Thumbnail window.
Cancels all image selections in the Thumbnail window.
Rotates the target image (outlined in orange) 90 degrees counter-clockwise.

Rotates the target image (outlined in orange) 90 degrees clockwise.
Inverts the target image (outlined in orange) horizontally.
Trims the target image (outlined in orange) in the Thumbnail window. Trimming is the act of selecting the area you want to keep in a photo and discarding the rest. Click this button to open the Crop window and specify the trimming frame.
Enlarges the target image (outlined in orange). You can also enlarge the image by double- clicking it.
Changes the size of images in the Thumbnail window.
Sorts the images in the Thumbnail window by category or by date (ascending or descending).
Images scanned from the Platen are displayed. When you select the checkbox of an image, the image appears in the Selected Images area.
Thumbnails may appear as "?" when there is not enough memory to display the images.
Displays all images.
Hides all images.
Cancels the selection of all images in the Selected Images area.
Cancels the selection of the target image (outlined in orange) in the Selected Images area.
Images selected in the Thumbnail window are displayed.
Scanning Photos and Documents

Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Scan Settings Dialog Box (Photos/Documents)
The Scan Settings dialog box opens when you click Specify... in the Scan/Import window.
In the Scan Settings dialog box, you can make advanced scan settings.

Select the type of document to be scanned. Scanning photos: Color Photo or Black and White Photo Scanning text documents: Color Document, Black and White Document or Text(OCR) Scanning magazines: Magazine(Color)
To scan correctly, select a document type that matches the document to be scanned.
Select the size of the document to be scanned. When you select Custom, a screen in which you can specify the document size appears. Select a Units, then enter the Width and Height and click OK.

When you select Auto Detect, the image may not be scanned at the correct position and size. In that case, change the size to the actual document size (A4, Letter, etc.) and align a corner of the document with the corner at the arrow of the Platen. You cannot select Auto Detect (Multiple Documents) or Auto Detect when Document Type is Text(OCR).
Select the resolution at which to scan documents.
The following scanning resolutions can be specified when Document Type is Text(OCR). 300 dpi / 400 dpi

Select this checkbox to reduce moire patterns. Printed photos and pictures are displayed as a collection of fine dots. "Moire" is a phenomenon where uneven gradation or a stripe pattern appears when such photos or pictures printed with fine dots are scanned. Descreen is the function for reducing this moire effect.
You cannot select this checkbox when Document Type is Color Photo, Black and White Photo or Text(OCR).
Scanning takes longer than usual when you enable Descreen.
Select this checkbox to emphasize the outline of the subjects and sharpen the image.
You cannot select this checkbox when Document Type is Text(OCR).
Select this checkbox to sharpen text in a document or reduce show-through in newspapers.
You cannot select this checkbox when Document Type is Color Photo, Black and White Photo or Text(OCR).
Select this checkbox when Document Type is text document and show-through is apparent in the scanned image.
Select this checkbox to correct shadows that appear between pages when scanning open booklets.
You cannot select this checkbox when Document Size is Auto Detect, Auto Detect (Multiple Documents) or Stitch Assist. Align the document correctly with the marks on the Platen.
Use ScanGear's Advanced Mode tab to correct gutter shadows when scanning non-standard size documents or when custom cropping frames are set. For details, see Gutter Shadow Correction in " Image Settings" (ScanGear's Advanced Mode tab).
Select this checkbox to detect the scanned text and correct the angle (within -0.1 to -10 degrees or +0.1 to +10 degrees) of the document.
You cannot select this checkbox when Document Type is Color Photo or Black and White Photo. You cannot select this checkbox when Document Size is Stitch Assist. The inclination of the following types of documents may not be corrected, as the text cannot be detected correctly. - Documents in which the text lines are inclined more than 10 degrees or the angles vary by line - Documents containing both vertical and horizontal text - Documents with extremely large or small fonts - Documents with small amount of text - Documents containing figures/images or hand-written text - Documents containing both vertical and horizontal lines (tables)
Scanning takes longer than usual when you enable Correct slanted document.
Detect the orientation of text documents and rotate images
Select this checkbox to detect the orientation of the document from the scanned text and rotate the

scanned image to the correct orientation. Select the language of the document to be scanned in Document Language.
You cannot select this checkbox when Document Type is Color Photo or Black and White Photo. You cannot select this checkbox when Document Size is Stitch Assist. This function may not work properly depending on the document language. Only text documents written in languages that can be selected from Document Language are supported. The orientation of the following types of documents may not be corrected, as the text cannot be detected correctly. In that case, select the scanned image in the Thumbnail window of the "
Photos/Documents (Platen) Screen (Scan/Import Window) " and rotate it with Edit Tools. - Resolution is outside the range of 300 dpi to 600 dpi - Font size is outside the range of 8 points to 48 points - Documents containing special fonts, effects, italics, or hand-written text - Documents with patterned backgrounds
Scanning takes longer than usual when you enable Detect the orientation of text documents and rotate images.
Select the language of the document to be scanned.
You cannot select this checkbox when Document Type is Color Photo or Black and White Photo. You cannot select this checkbox when Document Size is Stitch Assist.
Restores the default settings.
Document Language · Defaults

Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Stack of Documents (ADF) Screen (Scan/Import Window)
Point to Scan/Import in the Navigation Mode screen and click Stack of Documents (ADF).
Open this window to scan documents from the ADF (Auto Document Feeder).

(1) Settings and Operation Buttons
(4) Selected Images Area
Click this when you want to open images and PDF files saved on your computer. The View & Use window opens.
View & Use Window
Click this when you want to scan photos, documents, magazines and other printed materials. The screen for scanning photos and documents appears.
Photos/Documents (Platen) Screen (Scan/Import Window)
Stack of Documents (ADF)
Displays the screen for scanning multiple documents at one time from the ADF (Auto Document Feeder).
Select the type of document to be scanned. When scanning one side of each document: Color Document(Simplex), B/W Document(Simplex) or Text(Simplex) When scanning both sides of each document: Color Document(Duplex), B/W Document(Duplex) or Text(Duplex)
You cannot select Document Type if the Use the scanner driver checkbox is selected.
Specify...

Specify the document size, resolution, and other advanced scan settings.
Scan Settings Dialog Box (Stack of Documents (ADF))
Specify... is not available if the Use the scanner driver checkbox is selected.
Use the scanner driver
Select this checkbox when you want to scan with ScanGear (scanner driver). Use ScanGear (scanner driver) to correct images and adjust colors when scanning.
Scanning starts.
This button changes to Open Scanner Driver when you select the Use the scanner driver checkbox.
ScanGear (scanner driver) starts. See "ScanGear (Scanner Driver) Screens" for details on ScanGear (scanner driver) screens.
This button changes to Scan when you deselect the Use the scanner driver checkbox.
Delete all images in the Thumbnail window.
Images not saved on a computer will be deleted. To keep important images, use Save or other methods to save them to a computer before clicking Clear.
Save the selected images. Click to open the Save dialog box and specify the save settings.
Save as PDF file
Save the selected images as PDF files. Click to open the Save as PDF file dialog box and specify the save settings.
Save as PDF file Dialog Box
Jump to Main Menu
Jumps to the Main Menu.
The Preferences dialog box opens. In the Preferences dialog box, you can make advanced settings to MP Navigator EX functions.
Opens this guide.
Selects all images in the Thumbnail window.
Cancels all image selections in the Thumbnail window.

Rotates the target image (outlined in orange) 90 degrees counter-clockwise.
Rotates the target image (outlined in orange) 90 degrees clockwise.
Inverts the target image (outlined in orange) horizontally.
Trims the target image (outlined in orange) in the Thumbnail window. Trimming is the act of selecting the area you want to keep in a photo and discarding the rest. Click this button to open the Crop window and specify the trimming frame.
Enlarges the target image (outlined in orange). You can also enlarge the image by double- clicking it.
Changes the size of images in the Thumbnail window.
Sorts the images in the Thumbnail window by category or by date (ascending or descending).
Images scanned from the ADF (Auto Document Feeder) are displayed. When you select the checkbox of an image, the image appears in the Selected Images area.
Thumbnails may appear as "?" when there is not enough memory to display the images.
Displays all images.
Hides all images.
Cancels the selection of all images in the Selected Images area.
Cancels the selection of the target image (outlined in orange) in the Selected Images area.
Images selected in the Thumbnail window are displayed.
Scanning Multiple Documents at One Time from the ADF (Auto Document Feeder)

Page 433 of 817 pages Scan Settings Dialog Box (Stack of Documents (ADF))
Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Scan Settings Dialog Box (Stack of Documents (ADF))
The Scan Settings dialog box opens when you click Specify... in the Scan/Import window.
In the Scan Settings dialog box, you can make advanced scan settings.

Select the type of document to be scanned. When scanning one side of each document: Color Document(Simplex), Black and White Document(Simplex) or Text(Simplex) When scanning both sides of each document: Color Document(Duplex), Black and White Document(Duplex) or Text(Duplex)
Select the size of the document to be scanned.
Orientation...
Specify the orientation and stapling side of the documents to be scanned. Click to open the Orientation when scanning from ADF dialog box.

Binding Location cannot be specified when a simplex type such as Color Document(Simplex) is selected for Document Type.
Select the resolution at which to scan documents.
The following scanning resolutions can be specified when Document Type is Text(Simplex) or

Page 434 of 817 pages Scan Settings Dialog Box (Stack of Documents (ADF))
Text(Duplex). 300 dpi / 400 dpi
Select this checkbox to reduce moire patterns. Printed photos and pictures are displayed as a collection of fine dots. "Moire" is a phenomenon where uneven gradation or a stripe pattern appears when such photos or pictures printed with fine dots are scanned. Descreen is the function for reducing this moire effect.
You cannot select this checkbox when Document Type is Text(Simplex) or Text(Duplex).
Scanning takes longer than usual when you enable Descreen.
Select this checkbox to emphasize the outline of the subjects and sharpen the image.
You cannot select this checkbox when Document Type is Text(Simplex) or Text(Duplex).
Select this checkbox to sharpen text in a document or reduce show-through in newspapers.
You cannot select this checkbox when Document Type is Text(Simplex) or Text(Duplex).
Select this checkbox when Document Type is text document and show-through is apparent in the scanned image.
Select this checkbox to detect the scanned text and correct the angle (within -0.1 to -10 degrees or +0.1 to +10 degrees) of the document.
The inclination of the following types of documents may not be corrected, as the text cannot be detected correctly. - Documents in which the text lines are inclined more than 10 degrees or the angles vary by line - Documents containing both vertical and horizontal text - Documents with extremely large or small fonts - Documents with small amount of text - Documents containing figures/images or hand-written text - Documents containing both vertical and horizontal lines (tables)
Scanning takes longer than usual when you enable Correct slanted document.
Detect the orientation of text documents and rotate images
Select this checkbox to detect the orientation of the document from the scanned text and rotate the scanned image to the correct orientation. Select the language of the document to be scanned in Document Language.
This function may not work properly depending on the document language. Only text documents written in languages that can be selected from Document Language are supported. The orientation of the following types of documents may not be corrected, as the text cannot be detected correctly. In that case, select the scanned image in the Thumbnail window of the " Stack of Documents (ADF) Screen (Scan/Import Window) " and rotate it with Edit Tools. - Resolution is outside the range of 300 dpi to 600 dpi - Font size is outside the range of 8 points to 48 points - Documents containing special fonts, effects, italics, or hand-written text - Documents with patterned backgrounds

Page 435 of 817 pages Scan Settings Dialog Box (Stack of Documents (ADF))
Scanning takes longer than usual when you enable Detect the orientation of text documents and rotate images.
Select the language of the document to be scanned.
Restores the default settings.
Document Language · Defaults

Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Save Dialog Box
The Save dialog box opens when you click Save in the Scan/Import window.
In the Save dialog box, you can make settings for saving images to a computer.
Displays the folder in which to save the scanned images. To change the folder, click Browse... to specify another one. The following folders are specified by default. Windows Vista: MP Navigator EX folder in Picture folder Windows XP: MP Navigator EX folder in My Pictures folder Windows 2000: MP Navigator EX folder in My Pictures folder
Enter the file name of the image to be saved (up to 32 characters). When saving multiple files, 4 digits are appended to each file name.
Select a file type to save the scanned images. Select JPEG/Exif, TIFF or BMP.
You cannot select JPEG/Exif when Document Type is Text(OCR), Text(Simplex) or Text(Duplex).
Set...
You can specify a compression type for JPEG files. Select High(Low Compression), Standard or Low(High Compression).
Save to a Subfolder with Current Date
Select this checkbox to create a subfolder in the folder specified in Save in with the current date and save scanned files in it. A subfolder with a name such as "2009_01_01" (Year_Month_Date) will be created. If this checkbox is not selected, files are saved directly in the folder specified in Save in.
Save in · File name · Save as type

Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Save as PDF file Dialog Box
In the Save as PDF file dialog box, you can make advanced settings for saving scanned images as PDF files. You can save multiple documents as one PDF file or add pages to a PDF file created with MP Navigator EX.
You cannot save images scanned at 10501 pixels or more in the vertical and horizontal directions.
Dialog box that opens when Save as PDF file in the Scan/Import window is clicked

Dialog box that opens when Save Selected Pages or Save All Pages is clicked in the Create/Edit PDF file window

Select a PDF file type to save the scanned images.
Save each of the selected images as a separate PDF file.
Save multiple images in one PDF file.
Save as type · PDF(Multiple Pages)

PDF(Multiple Pages) is displayed when multiple images are selected.
Add the scanned images to a PDF file. The images are added to the end of the PDF file. You cannot rearrange the pages of the PDF file to which the images are added.
Images can only be added to PDF files created with MP Navigator EX. You cannot specify PDF files created with other applications. PDF files edited in other applications cannot be specified as well. If a password-protected PDF file is edited, the passwords will be deleted. Reset the passwords.
Setting Passwords for PDF Files
Set...
Make advanced settings for creating PDF files. See " PDF Settings Dialog Box " for details.
Select this checkbox to open the Password Security -Settings dialog box in which you can set passwords for opening, editing and printing created PDF files.
Setting Passwords for PDF Files
This is displayed when you select PDF(Add Page) for Save as type and specify the PDF file to which images are added. To change the file, click Browse... to specify another one.
Images can only be added to PDF files created with MP Navigator EX. You cannot specify PDF files created with other applications. PDF files edited in other applications cannot be specified as well.
Enter the file name of the image to be saved (up to 32 characters). When saving multiple files, 4 digits are appended to each file name.
Displays the folder in which to save the PDF files. To change the folder, click Browse... to specify another one. The following folders are specified by default. Windows Vista: MP Navigator EX folder in Picture folder Windows XP: MP Navigator EX folder in My Pictures folder Windows 2000: MP Navigator EX folder in My Pictures folder
Save to a Subfolder with Current Date
Select this checkbox to create a subfolder in the folder specified in Save in with the current date and save scanned files in it. A subfolder with a name such as "2009_01_01" (Year_Month_Date) will be created. If this checkbox is not selected, files are saved directly in the folder specified in Save in.

Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > PDF Settings Dialog Box
In the PDF Settings dialog box, you can specify the PDF compression type and other advanced settings for creating PDF files.

Select this checkbox to convert characters in a document to text data. This will enable an easy search by keyword.
Select the language of the document to be scanned.
Detect the orientation of text documents and rotate images
Select this checkbox to detect the orientation of the document from the scanned text and rotate the scanned image to the correct orientation.
This function may not work properly depending on the document language. Only text documents written in languages that can be selected from Document Language are supported. The orientation of the following types of documents may not be corrected, as the text cannot be detected correctly. - Resolution is outside the range of 300 dpi to 600 dpi - Font size is outside the range of 8 points to 48 points - Documents containing special fonts, effects, italics, or hand-written text - Documents with patterned backgrounds
Select this checkbox to detect the scanned text and correct the angle (within -0.1 to -10 degrees or +0.1 to +10 degrees) of the document.
The inclination of the following types of documents may not be corrected, as the text cannot be detected correctly. - Documents in which the text lines are inclined more than 10 degrees or the angles vary by line - Documents containing both vertical and horizontal text - Documents with extremely large or small fonts - Documents with small amount of text - Documents containing figures/images or hand-written text - Documents containing both vertical and horizontal lines (tables)
Select a compression type for saving.
It is recommended that you normally select this setting.

Compresses the file size when saving, allowing you to reduce the load on your network/server.
Highly compressed PDF images may degrade if you repeatedly save them with high compression.
The following images can be compressed with high efficiency. - Images with resolutions within the range of 75 dpi to 600 dpi
Set passwords for opening, editing and printing the created PDF files.
In Windows 2000, Internet Explorer 5.5 Service Pack 2 or later is required to use this function. This function is not available when images are automatically saved after scanning, such as when scanning from the One-click Mode screen or scanning using the Operation Panel of the machine.
Select Password Security and set passwords in the Password Security -Settings dialog box.
Setting Passwords for PDF Files
Security

Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > View & Use Window
In the Navigation Mode screen, point to View & Use and click My Box (Scanned/Imported Images), Specify Folder or Recently Saved Images.
Open this window to display or use scanned images or images saved on a computer.
For PDF files, only those created with MP Navigator EX are displayed. You cannot display PDF files created with other applications. PDF files edited in other applications cannot be displayed as well.

(1) Settings and Operation Buttons
(4) Selected Images Area
Click this when you want to scan photos, documents, magazines and other printed materials. The Scan/Import window opens.
Photos/Documents (Platen) Screen (Scan/Import Window)
My Box (Scanned/Imported Images)
Displays folders of images (grouped by year, year/month, year/month/date and category) in My Box in tree view. Select a folder to display its contents in the Thumbnail window to the right.
(2) Toolbar · (3) Thumbnail Window · (Scan/Import)

Image date is the scanned, captured or updated date.
Displays all hard disks and folders in tree view. Select a folder to display images in the Thumbnail window to the right.
"Scanned/Imported Images" and images that have been "Attached to E-mail" or "Sent to Application" recently are displayed in tree view by date. Select a Year/Month/Day folder to display images by date in the Thumbnail window to the right. Image date is the scanned or sent date.
The advanced search options opens.
Specify what to do with the selected images. See the corresponding sections below for details on each button.
The buttons in the Task Button area are displayed when the corresponding applications are installed.
Jump to Main Menu
Jumps to the Main Menu.
The Preferences dialog box opens. In the Preferences dialog box, you can make advanced settings to MP Navigator EX functions.
Opens this guide.
Selects all images in the Thumbnail window.
Cancels all image selections in the Thumbnail window.
Allows you to correct the target image (outlined in orange). Click this button to open the Correct/ Enhance Images window in which you can correct/enhance images and also adjust the brightness, contrast, etc.
Image correction/enhancement cannot be applied to PDF files or black and white binary files.
Enlarges the target image (outlined in orange). You can also enlarge the image by double- clicking it. You can check all pages when you select a PDF file.

You can also check file information such as file name, date, size and security setting. A lock icon appears for PDF files with Document Open Password set.
Opening/Editing Password-protected PDF Files
Enter a word or phrase included in the file name, Exif information or PDF text of the image you
want to search for, then click
(Search button). For Exif information, text in Maker, Model, Description and User Comment is searched.
Search images in My Box (Scanned/Imported Images), Recently Saved Images or a selected folder and its subfolders.
Refreshes the Thumbnail window contents.
Changes the size of images in the Thumbnail window.
Sorts the images in the Thumbnail window by category, date (ascending or descending) or name (ascending or descending). Images can be sorted by category only when My Box (Scanned/Imported Images) or Specify Folder is displayed.
Images scanned from the Platen are displayed. When you select the checkbox of an image, the image appears in the Selected Images area.
In Windows 2000, Internet Explorer 5.5 Service Pack 2 or later is required to open password- protected PDF files.
A lock icon appears for PDF files with Document Open Password set. Images may appear as "?" in the following cases. - Opening unsupported images - File size is too large and there is not enough memory to display the image - The file is corrupted
Images scanned from the Platen are displayed by category.
Some images may not be detected correctly and thus may be classified into wrong categories. In that case, drag and drop an image and move it from one category to another.

The following categories are provided.

Photos: Portrait, Others Documents: Business Card, Hagaki, Standard Size, PDF File, Others Custom categories: Displays your custom categories. Unclassified: Displays images that have not yet been classified.
The number of images classified into the category is displayed.
The number of images with the checkbox selected is displayed.
This portion is displayed only when one or more images are selected.
Displays all images.
Hides all images.
When My Box (Scanned/Imported Images) or Specify Folder is displayed, the Edit Custom Categories dialog box opens. In the Edit Custom Categories dialog box, you can add/delete categories displayed in Custom Categories. See "Classifying Images into Categories " for details.
Images imported from hard disks appear in Unclassified. Click Classify Images to classify them automatically. This button is displayed only when My Box (Scanned/Imported Images) or Specify Folder is displayed.
Classification may take time if there are many images to classify.
Cancels the selection of all images in the Selected Images area.
Cancels the selection of the target image (outlined in orange) in the Selected Images area.
Images selected in the Thumbnail window are displayed.
Opening Images Saved on a Computer

Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Create/ Edit PDF file Window
Click PDF in the View & Use window, then click Create/Edit PDF file on the list to open the Create/Edit PDF file window.
In the Create/Edit PDF file window, you can add/delete pages and rearrange the page order of PDF files created with MP Navigator EX.
You cannot save images scanned at 10501 pixels or more in the vertical and horizontal directions. If a password-protected PDF file is edited, the passwords will be deleted. Reset the passwords.
Setting Passwords for PDF Files
You can move the selected image (outlined in orange).
Moves the selected image to the top.
Moves the selected image up one page.
Moves the selected image down one page.
Moves the selected image to the end.
You can also drag and drop the image to rearrange the order.
Deletes the selected image.
Allows you to select and add an existing PDF file.
A password will be required to add a password-protected PDF file.
Rearrange Pages · Delete Selected Pages · Add Page

Cancels the latest change made.
Cancels all the changes made.
Opens the Save as PDF file dialog box. Specify the save settings. Only the selected page is saved.
When multiple pages are selected, a multiple-page PDF file is created. See "Save as PDF file Dialog Box" for details on the Save as PDF file dialog box.
Opens the Save as PDF file dialog box. Specify the save settings. All PDF files in the list will be saved as one PDF file.
Closes the Create/Edit PDF file window.
Rotates the file 90 degrees counter-clockwise.
Rotates the file 90 degrees clockwise.
Switches to Preview Mode. The selected file appears in Preview.

Enlarges the image displayed in Preview.
Reduces the image displayed in Preview.
Enlarges/reduces the image to display it fully in Preview.
Switches to Thumbnail Mode. Thumbnails of files are displayed.

Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Print Document Dialog Box
Click Print in the View & Use window, then click Print Document on the list to open the Print Document dialog box.
In the Print Document dialog box, you can make advanced settings for printing multiple scanned images at one time.
The setting items in the Print Document dialog box vary by printer.
Select the printer to use.
Select paper source.
Select a print type.
Print one image per sheet.
Print images at the selected scale (enlarged or reduced).
Print an image at the paper size (enlarged or reduced).
Print the image on an entire sheet of paper without margins.
Page Layout Printing (2 on 1)
Layout and print two images on a sheet of paper.
Page Layout Printing (4 on 1)
Layout and print four images on a sheet of paper.
Enlarge or reduce images to print.
Print a reduced or enlarged image by specifying a scale in increments of 1%.

Scale is adjusted automatically according to the detected paper width and the selected paper size. Image may be printed rotated 90 degrees depending on its size.
Select a scale from the list.
At normal-size (100%), some images may be printed small or with some portions cropped. In that case, select Auto to resize the print in proportion to the paper size.
Select the size of paper for printing. Match the size to the size of the paper set in the machine.
Selectable paper sizes depend on the selected printer.
Select the type of paper for printing. Print quality may be fixed depending on the paper type.
Selectable paper types depend on the selected printer.
Select the print quality.
to select the print density.
to select the number of copies to be printed.
Select this checkbox to print the document in black and white.
Select this checkbox to display the print result before printing.
Restores the default settings.
Start printing with the specified settings.
To cancel while spooling, click Cancel. To cancel while printing, select the printer icon on the taskbar and click Cancel Printing.

Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Print Photo Dialog Box
Click Print in the View & Use window, then click Print Photo on the list to open the Print Photo dialog box.
The Print Photo dialog box will not open if Easy-PhotoPrint EX is installed. Easy-PhotoPrint EX starts instead. PDF files cannot be printed.
Double-click an image to display it in a different window.
Select the printer to use.
Properties...
Displays the selected printer's advanced setting screen.
Select the size of paper for printing. Match the size to the size of the paper set in the machine.
Select the type of paper for printing. Print quality may be fixed depending on the paper type.
Select a print type.
Print one image per sheet.
Print an image at the paper size (enlarged or reduced).
Select this checkbox to print the image on an entire sheet of paper without margins.
Page Layout setting will be disabled when you select Borderless Printing.

This setting is only available with printers that support borderless printing.
Specify the print orientation.
This setting is available only when Page Layout is Normal-size Printing. For others, the image is automatically rotated according to the aspect ratio of the paper.
Specify the number of copies to print.
Select this checkbox to print the image in vivid colors.
Select this checkbox to display the print result before printing.
Starts printing.
Only the images in the Thumbnail window with the checkbox selected are printed.
Closes the dialog box without printing the photo.

Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Send via E-mail Dialog Box
Click Send in the View & Use window, then click Attach to E-mail on the list to open the Send via E-mail dialog box.
In the Send via E-mail dialog box, you can make advanced settings for attaching images to e-mail.
MP Navigator EX is compatible with the following e-mail software programs: - Windows Mail (Windows Vista) - Outlook Express (Windows XP/Windows 2000) - Microsoft Outlook (If an e-mail software program does not operate properly, check that the program's MAPI is enabled. To enable MAPI, refer to the manual of the e-mail software program.)
The e-mail software program set up via Preferences in the Navigation Mode screen is displayed. Select the e-mail software program you want to use.
Adjust attachment file size
When Save as type is JPEG, selecting this checkbox allows you to resize the images. Select a size from Size.
Displays the folder in which to save the images. To change the folder, click Browse... to specify another one. If resized, the resized images are saved. The following folders are specified by default. Windows Vista: MP Navigator EX folder in Picture folder Windows XP: MP Navigator EX folder in My Pictures folder Windows 2000: MP Navigator EX folder in My Pictures folder
Enter the file name of the image to be attached (up to 32 characters). When saving multiple files, 4 digits are appended to each file name.
Set...
You can specify a compression type for JPEG files. Select High(Low Compression), Standard or Low(High Compression).
Mail Program · Save in · File name

Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Correct/ Enhance Images Window
(Image Correction/Enhancement) in the View & Use window or click Fix photo images in the Task Button area to open the Correct/Enhance Images window.
In the Correct/Enhance Images window, you can make advanced settings including image correction/ enhancement and brightness/contrast adjustment.
You can also display the source image and corrected image side by side for comparison.
Image correction/enhancement cannot be applied to PDF files or black and white binary files.
The Correct/Enhance Images window can also be opened by clicking
(Image Correction/ Enhancement) in the Zoom in dialog box. It may take a while to correct large images.

Available tasks and settings vary between the Auto and Manual tabs.
Click Auto or Manual to open the corresponding tab.
Use the functions in the Auto tab to apply corrections and enhancements to the entire image.
See "Correcting/Enhancing Images Automatically " for details.
Click · (1) Task Area · (2) Toolbar


Applies automatic corrections suitable for photos.
Sharpens out-of-focus faces. You can adjust the effect level using the slider.
Enhances skin beautifully by removing blemishes and wrinkles. You can adjust the effect level using the slider.
Apply to all images
Applies the correction to all images.
Applies the selected effect to the selected image or all images.
Cancels all corrections and enhancements applied to the selected image.
Saves the selected image.
Save All Corrected Images
Saves all the corrected images displayed in the thumbnail list.
Closes the Correct/Enhance Images window.
Use Adjust to adjust brightness and contrast, or to sharpen the entire image.
Use Correct/Enhance to correct/enhance specific areas.
See "Correcting/Enhancing Images Manually " for details.


Adjusts the overall image brightness. Move the slider to the left to darken and right to brighten the image.
Adjusts the contrast of the image. Adjust the contrast when the image is flat due to lack of contrast. Move the slider to the left to decrease and right to increase the contrast of the image.
Emphasizes the outline of the subjects to sharpen the image. Adjust the sharpness when the photo is out of focus or text is blurred. Move the slider to the right to sharpen the image.
Blurs the outline of the subjects to soften the image. Move the slider to the right to soften the image.
Removes show-through of text from the reverse side or removes the base color. Adjust the show- through level to prevent text on the reverse side of thin document or the base color of the document from appearing on the image. Move the slider to the right to increase the show-through removal effect.
Resets all adjustments (brightness, contrast, sharpness, blur, and show-through removal).
Cancels all corrections, enhancements and adjustments applied to the selected image.
Saves the selected image.
Save All Corrected Images
Saves all the corrected images displayed in the thumbnail list.
Closes the Correct/Enhance Images window.


Corrects the entire image so that the selected facial area is brightened. You can adjust the effect level using the slider.
Cancels the latest correction.
Corrects the entire image to sharpen the face. You can specify the area you want to apply the effect to. You can adjust the effect level using the slider.
Enhances skin beautifully by removing blemishes and wrinkles. You can specify the area you want to apply the effect to. You can adjust the effect level using the slider.
Removes moles. You can specify the area you want to apply the effect to.
Cancels all corrections, enhancements and adjustments applied to the selected image.
Saves the selected image.
Save All Corrected Images
Saves all the corrected images displayed in the thumbnail list.
Closes the Correct/Enhance Images window.
Applies the selected effect to the specified area.
Rotates the image 90 degrees counter-clockwise.
Rotates the image 90 degrees clockwise.
Inverts the image horizontally.
Trimming is the act of selecting the area you want to keep in a photo and discarding the rest. In

the displayed window, drag the white frame to specify the trimming area. Move the cursor inside the white frame and drag to move the trimming area.

Place the main subjects along the broken white lines or at the intersections to create a balanced image.
Enlarges the displayed image.
Reduces the displayed image.
Enlarges/reduces the image to display it full-screen.
Opens the source image for comparison. The source image appears on the left and the corrected image appears on the right.


Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > One-click Mode Screen
(Switch Mode) at the bottom left of the Navigation Mode screen to display the One-click Mode screen.
You can complete from scanning to saving, etc. at one time by simply clicking the corresponding icon.
Scan and save documents. Document type is automatically detected. File format is automatically set. Files are saved to a computer. When you click this icon, the Save dialog box opens and you can specify the scan/save settings.
Save Dialog Box (One-click Mode Screen)
Scan documents and save them as PDF files. When you click this icon, the PDF dialog box opens and you can specify the scan/save and application settings.
Scan documents or photos and attach them to e-mail. When you click this icon, the Mail dialog box opens and you can specify the scan/save and e-mail software program settings.
Scan text documents then extract text in the image and display it in Notepad (included with Windows). When you click this icon, the OCR dialog box opens and you can specify the scan/save settings.
For further procedures, refer to the application's manual.
Scan documents and open them in a specified application. Document type is automatically detected. When you click this icon, the Custom dialog box opens and you can specify the scan/save and application settings.
For further procedures, refer to the application's manual.
Switches to Navigation Mode. The Navigation Mode screen appears.
Custom Scan with One-click Tab
The Preferences dialog box opens. In the Preferences dialog box, you can make advanced settings to MP Navigator EX functions.

Opens this guide.
The following restrictions apply when you scan with Document Type set to Auto Mode in the Save or Custom dialog box. When you want to convert text in the scanned image to text data, specify Document Type (do not select Auto Mode).
Easy Scanning with One-click

Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Save Dialog Box (One-click Mode Screen)
Click Save to PC on the Custom Scan with One-click tab or click Save in the One-click Mode screen to open the Save dialog box.

Select the type of document to be scanned. When Auto Mode is selected, the document type is automatically detected. In that case, Color Mode, Document Size and Resolution are automatically set as well.
The following types of documents cannot be scanned correctly with Auto Mode. In that case, specify Document Type. - Documents other than photos, Hagaki, business cards, magazines, newspapers, text documents and CD/DVD - A4 photos - Text documents smaller than 2L (5 inches x 7 inches) (127 mm x 178 mm), such as paperback pages with the spine cut off - Documents printed on thin white paper - Wide documents such as panoramic photos Reflective CD/DVD labels may not be scanned properly. Place documents correctly according to the type of document to be scanned. Otherwise, documents may not be scanned correctly. See "Placing Documents" for details on how to place documents. Scanning takes longer than usual when scanning from the ADF (Auto Document Feeder) for the first time with Auto Mode. When scanning two or more documents from the ADF (Auto Document Feeder), you cannot scan documents of different sizes at one time even if Auto Mode is set.
To reduce moire, set Document Type to Magazine.
Document Type

Select how to scan the document.
Select the size of the document to be scanned. When you select Custom, a screen in which you can specify the document size appears. Select a Units, then enter the Width and Height and click OK.
When you select Auto Detect, the image may not be scanned at the correct position and size. In that case, change the size to the actual document size (A4, Letter, etc.) and align a corner of the document with the corner at the arrow of the Platen.
Select the resolution at which to scan documents.
Use the scanner driver
Select this checkbox to display the ScanGear (scanner driver) screen and make advanced scan settings. Color Mode, Document Size, Resolution and other settings in the Save dialog box will be disabled. Specify these settings in the ScanGear (scanner driver) screen.
Specify...
Click to open the Scan Settings dialog box in which you can make advanced scan settings.
Scan Settings Dialog Box
Automatically save the image to your computer after scanning it
Select this to save the images to your computer as specified after scanning them. The File name, Save as type and Save in settings will be displayed.
If you select this function, you will not be able to set passwords for PDF files.
Enter the file name of the image to be saved (up to 32 characters). When saving multiple files, 4 digits are appended to each file name.
Select a file type to save the scanned images. Select Auto, JPEG/Exif, TIFF or BMP. Auto is displayed when Document Type is Auto Mode. When saving as PDF files, select PDF, PDF(Multiple Pages) or PDF(Add Page).
When Document Type is Auto Mode and Save as type is Auto, the file format may differ depending on how you place the document. See "Placing Documents" for details on how to place documents. Large documents (such as A4 photos) that cannot be placed away from the edges/arrow of the Platen may not be saved in the correct file format when Save as type is Auto. In that case, select a file format suitable for the document to be scanned.
When Auto is selected, files are saved in the following formats according to the document type. Photos, Hagaki, business cards and CD/DVD: JPEG Magazines, newspapers and text documents: PDF You can change the file format from Set

Images saved as PDF files may not open depending on the application. In that case, select an option other than PDF in Save as type. If you select JPEG/Exif, the Save the JPEG/Exif file in AdobeRGB checkbox will be selectable.
Set...
You can specify the file format in which to save images. Select a file format for Document and Photo each.
You can specify a compression type for JPEG files. Select High(Low Compression), Standard or Low(High Compression).
Make advanced settings for creating PDF files. See " PDF Settings Dialog Box " for details.
Displays the folder in which to save the scanned images. To change the folder, click Browse... to specify another one. The following folders are specified by default. Windows Vista: MP Navigator EX folder in Picture folder Windows XP: MP Navigator EX folder in My Pictures folder Windows 2000: MP Navigator EX folder in My Pictures folder
Save to a Subfolder with Current Date
Select this checkbox to create a subfolder in the folder specified in Save in with the current date and save scanned files in it. A subfolder with a name such as "2009_01_01" (Year_Month_Date) will be created. If this checkbox is not selected, files are saved directly in the folder specified in Save in.
Save the JPEG/Exif file in AdobeRGB
Select this checkbox to save the images in colors that correspond to Adobe RGB.
This function is available only when Save as type is JPEG/Exif. This function is not available if the Adobe RGB profile is not installed.
You cannot select this setting if the Use the scanner driver checkbox is selected. When you save an image with the Save the JPEG/Exif file in AdobeRGB checkbox selected, an underscore is added to the beginning of the file name. (Example: _Image0001.jpg)
Open the save dialog box after scanning the image (Input Exif information)
Select this to open the Save dialog box after scanning the images and specify the save settings such as destination folder, file name and Exif information.
To set passwords for PDF files, select Open the save dialog box after scanning the image (Input Exif information). After scanning, you can set the passwords in the Save dialog box.
Setting Passwords for PDF Files
You can select whether to open the View & Use window or Explorer after saving the images.
Start scanning by clicking the one-click button
Select this checkbox to start scanning when you click an icon.

Saves and applies the specified settings. Click Cancel instead of Apply to cancel the specified settings.
Cancels the specified settings. The current screen closes.
Returns all settings in the screen to their defaults.
Scans and saves documents with the specified settings. When Save as type is Auto, a confirmation appears. Click Open Manual to open this guide (if it is installed).
Cancel · Defaults · Scan

Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Scan Settings Dialog Box
Make advanced settings for scanning with one-click or scanning using the Operation Panel of the machine.
The Scan Settings dialog box opens when you click Specify... in a dialog box for making scan settings.

The displayed items vary by document type and how the screen was opened.
Select the type of document to be scanned. When Auto Mode is selected, the document type is automatically detected. In that case, Color Mode, Document Size, etc. are automatically set as well.
To scan correctly, select a document type that matches the document to be scanned. When opened from the Scanner Button Settings tab, the Document Type specified in the Scanner Button Settings tab is displayed and cannot be changed in this dialog box.
Select how to scan the document.
This mode renders the image in 256 levels (8 bit) of R(ed), G(reen), and B(lue).
This mode renders the image in 256 levels (8 bit) of black and white.
This mode renders the image in black and white. The contrast in the image is divided at certain levels (threshold level) into black and white and is rendered in two colors.
Color Mode is not displayed in the Scan Settings dialog box opened from the Scanner Button Settings tab.
Select the size of the document to be scanned. When you select Custom, a screen in which you can specify the document size appears. Select a Units, then enter the Width and Height and click OK.

When you select Auto Detect, the image may not be scanned at the correct position and size. In that case, change the size to the actual document size (A4, Letter, etc.) and align a corner of the document with the corner at the arrow of the Platen.
Orientation...
Specify the orientation and stapling side of the documents to be scanned.
The Orientation when scanning from ADF dialog box can only be opened when Document Type is Document (ADF Simplex) or Document (ADF Duplex). Binding Location cannot be specified when Document Type is Document (ADF Simplex).
Select the resolution at which to scan documents.
Select this checkbox to reduce moire patterns. Printed photos and pictures are displayed as a collection of fine dots. "Moire" is a phenomenon where uneven gradation or a stripe pattern appears when such photos or pictures printed with fine dots are scanned. Descreen is the function for reducing this moire effect.
Scanning takes longer than usual when you enable Descreen.
Select this checkbox to emphasize the outline of the subjects and sharpen the image.
Select this checkbox to sharpen text in a document or reduce show-through in newspapers.
Select this checkbox when Document Type is text document and show-through is apparent in the scanned image.
Select this checkbox to correct shadows that appear between pages when scanning open booklets.
You cannot select this checkbox when Document Size is Auto Detect, Auto Detect (Multiple Documents) or Stitch Assist. You cannot select this checkbox when Document Type is Document (ADF Simplex) or Document (ADF Duplex).

Align the document correctly with the marks on the Platen.
Use ScanGear's Advanced Mode tab to correct gutter shadows when scanning non-standard size documents or when custom cropping frames are set. For details, see Gutter Shadow Correction in " Image Settings" (ScanGear's Advanced Mode tab).
Select this checkbox to detect the scanned text and correct the angle (within -0.1 to -10 degrees or +0.1 to +10 degrees) of the document.
You cannot select this checkbox when Document Size is Stitch Assist. The inclination of the following types of documents may not be corrected, as the text cannot be detected correctly. - Documents in which the text lines are inclined more than 10 degrees or the angles vary by line - Documents containing both vertical and horizontal text - Documents with extremely large or small fonts - Documents with small amount of text - Documents containing figures/images or hand-written text - Documents containing both vertical and horizontal lines (tables)
Scanning takes longer than usual when you enable Correct slanted document.
Detect the orientation of text documents and rotate images
Select this checkbox to detect the orientation of the document from the scanned text and rotate the scanned image to the correct orientation. Select the language of the document to be scanned in Document Language.
You cannot select this checkbox when Document Size is Stitch Assist. This function may not work properly depending on the document language. Only text documents written in languages that can be selected from Document Language are supported. The orientation of the following types of documents may not be corrected, as the text cannot be detected correctly. - Resolution is outside the range of 300 dpi to 600 dpi - Font size is outside the range of 8 points to 48 points - Documents containing special fonts, effects, italics, or hand-written text - Documents with patterned backgrounds
Scanning takes longer than usual when you enable Detect the orientation of text documents and rotate images.
Select the language of the document to be scanned.
You cannot select this checkbox when Document Size is Stitch Assist.
Restores the default settings.
Correct slanted document · Document Language · Defaults

Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Save Dialog Box
The Save dialog box for specifying the image's file name and destination opens after you scan with Open the save dialog box after scanning the image (Input Exif information) selected in the Save dialog box that opens when you click Save to PC on the Custom Scan with One-click tab or Save in the One-click Mode screen. You can specify the file type and destination while viewing the thumbnails.

Select a file type to save the scanned images. Select JPEG/Exif, TIFF, BMP, PDF, PDF(Multiple Pages) or PDF(Add Page).
Save each of the selected images as a separate PDF file.
Save multiple images in one PDF file.
PDF(Multiple Pages) is displayed when multiple images are scanned.
Add the scanned images to a PDF file. The images are added to the end of the PDF file. You cannot rearrange the pages of the PDF file to which the images are added.
Images can only be added to PDF files created with MP Navigator EX. You cannot specify PDF files created with other applications. PDF files edited in other applications cannot be specified as well. If a password-protected PDF file is edited, the passwords will be deleted. Reset the passwords.
Setting Passwords for PDF Files
PDF, PDF(Multiple Pages) and PDF(Add Page) cannot be selected for images scanned using the Operation Panel of the machine.
Save as type · PDF(Multiple Pages) · PDF(Add Page)

Set...
You can specify a compression type for JPEG files. Select High(Low Compression), Standard or Low(High Compression).
Make advanced settings for creating PDF files. See " PDF Settings Dialog Box " for details.
This is displayed when you select PDF(Add Page) for Save as type and specify the PDF file to which images are added. To change the file, click Browse... to specify another one.
Images can only be added to PDF files created with MP Navigator EX. You cannot specify PDF files created with other applications. PDF files edited in other applications cannot be specified as well.
Exif Settings...
When Save as type is JPEG/Exif, you can input Exif information into the file to be saved.
Exif Settings Dialog Box
Select this checkbox to open the Password Security -Settings dialog box in which you can set passwords for opening, editing and printing created PDF files.
Setting Passwords for PDF Files
This function is available only when Save as type is PDF, PDF(Multiple Pages) or PDF(Add Page).
Rotate Left 90°/Rotate Right 90°
Rotates scanned images 90 degrees counter-clockwise or clockwise. Select the image you want to rotate and click Rotate Left 90° or Rotate Right 90°.
Enter the file name of the image to be saved (up to 32 characters). When saving multiple files, 4 digits are appended to each file name.
Displays the folder in which to save the scanned images. To change the folder, click Browse... to specify another one. The following folders are specified by default. Windows Vista: MP Navigator EX folder in Picture folder Windows XP: MP Navigator EX folder in My Pictures folder Windows 2000: MP Navigator EX folder in My Pictures folder
Save to a Subfolder with Current Date
Select this checkbox to create a subfolder in the folder specified in Save in with the current date and save scanned files in it. A subfolder with a name such as "2009_01_01" (Year_Month_Date) will be created. If this checkbox is not selected, files are saved directly in the folder specified in Save in.

Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Exif Settings Dialog Box
You can input Exif information into a file to be saved. Exif is a standard format for embedding various shooting data in digital camera images (JPEG). Embedding Exif information into scanned images allows you to organize and print them along with digital camera images.
The Exif Settings dialog box can be opened when Save as type is JPEG/Exif.

Displays the information obtained automatically from the machine or software.
Displays the information specified on the right side of the screen.
Advanced Information Settings Area
You can input Exif information such as the title and shooting data. Select the checkbox of the items you want to specify, and select or enter information.
Apply the Same Setting of Input Items Automatically
Select this checkbox to automatically display the information you specified for the previous image.
After specifying all the information you need, click Apply to embed it into the image. The information appears in Advanced Information.
Embeds the specified information into the image and closes the screen. The specified information is saved.
Cancels the settings and closes the screen. Information is embedded when Cancel is clicked after clicking Apply.

Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > PDF Dialog Box
Click Save as PDF file on the Custom Scan with One-click tab or click PDF in the One-click Mode screen to open the PDF dialog box.

Select the type of document to be scanned.
Select how to scan the document.
Select the size of the document to be scanned. When you select Custom, a screen in which you can specify the document size appears. Select a Units, then enter the Width and Height and click OK.
When you select Auto Detect, the image may not be scanned at the correct position and size. In that case, change the size to the actual document size (A4, Letter, etc.) and align a corner of the document with the corner at the arrow of the Platen.
Select the resolution at which to scan documents.

Specify...
Click to open the Scan Settings dialog box in which you can make advanced scan settings.
Scan Settings Dialog Box
Automatically save the image to your computer after scanning it
Select this to save the images to your computer as specified after scanning them.
If you select this function, you will not be able to set passwords for PDF files.
Enter the file name of the image to be saved (up to 32 characters). When saving multiple files, 4 digits are appended to each file name.
Select a file type to save the scanned images. Select PDF, PDF(Multiple Pages) or PDF(Add Page).
Save each of the selected images as a separate PDF file.
Save multiple images in one PDF file.
Add the scanned images to a PDF file. The images are added to the end of the PDF file. You cannot rearrange the pages of the PDF file to which the images are added.
Images cannot be added to password-protected PDF files.
Click Set... to open the PDF Settings dialog box in which you can specify the PDF compression type and other advanced settings for creating PDF files.
PDF Settings Dialog Box See "Creating/Editing PDF Files" to delete or rearrange the pages of saved PDF files.
Displays the folder in which to save the scanned images. To change the folder, click Browse... to specify another one. The following folders are specified by default. Windows Vista: MP Navigator EX folder in Picture folder Windows XP: MP Navigator EX folder in My Pictures folder Windows 2000: MP Navigator EX folder in My Pictures folder
Save to a Subfolder with Current Date
Select this checkbox to create a subfolder in the folder specified in Save in with the current date and save scanned files in it. A subfolder with a name such as "2009_01_01" (Year_Month_Date) will be created. If this checkbox is not selected, files are saved directly in the folder specified in Save in.
Open the save dialog box after scanning the image
Select this to open the Save as PDF file dialog box after scanning the images and specify the save settings such as destination folder and file name.
Save as PDF file Dialog Box
To set passwords for PDF files, select Open the save dialog box after scanning the image. After scanning, you can set the passwords in the Save as PDF file dialog box.
Setting Passwords for PDF Files

Specify an application with which to open scanned images. Drag and drop the icon of an application that supports the file format displayed in Save as type. The specified application starts after images are scanned.
Depending on the specified application, the images may not appear correctly or the application may not start.
Cancels the application setting.
Set...
Allows you to select an application to start.
Start scanning by clicking the one-click button
Select this checkbox to start scanning when you click an icon.
Saves and applies the specified settings. Click Cancel instead of Apply to cancel the specified settings.
Cancels the specified settings. The current screen closes.
Returns all settings in the screen to their defaults.
Scans and saves documents as PDF files with the specified settings.

Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Save as PDF file Dialog Box
The Save as PDF file dialog box opens when you scan from Save as PDF file on the Custom Scan with One-click tab or from PDF in the One-click Mode screen after selecting Open the save dialog box after scanning the image.
In the Save as PDF file dialog box, you can make settings for saving images to a computer.
You cannot save images scanned at 10501 pixels or more in the vertical and horizontal directions.

Select a PDF file type to save the scanned images.
Save each of the selected images as a separate PDF file.
Save multiple images in one PDF file.
PDF(Multiple Pages) is displayed when multiple images are scanned.
Add the scanned images to a PDF file. The images are added to the end of the PDF file. You cannot rearrange the pages of the PDF file to which the images are added.
Images can only be added to PDF files created with MP Navigator EX. You cannot specify PDF files created with other applications. PDF files edited in other applications cannot be specified as well. PDF(Add Page) cannot be selected for images scanned using the Operation Panel of the machine. If a password-protected PDF file is edited, the passwords will be deleted. Reset the passwords.
Save as type · PDF(Multiple Pages) · PDF(Add Page)

You can set passwords for PDF files.
Setting Passwords for PDF Files
Set...
Make advanced settings for creating PDF files. See "PDF Settings Dialog Box " for details.
Select this checkbox to open the Password Security -Settings dialog box in which you can set passwords for opening, editing and printing created PDF files.
Setting Passwords for PDF Files
Rotate Left 90°/Rotate Right 90°
Rotates scanned images 90 degrees counter-clockwise or clockwise. Select the image you want to rotate and click Rotate Left 90° or Rotate Right 90°.
Enter the file name of the image to be saved (up to 32 characters). When saving multiple files, 4 digits are appended to each file name.
Displays the folder in which to save the PDF files. To change the folder, click Browse... to specify another one. The following folders are specified by default. Windows Vista: MP Navigator EX folder in Picture folder Windows XP: MP Navigator EX folder in My Pictures folder Windows 2000: MP Navigator EX folder in My Pictures folder
Save to a Subfolder with Current Date
Select this checkbox to create a subfolder in the folder specified in Save in with the current date and save scanned files in it. A subfolder with a name such as "2009_01_01" (Year_Month_Date) will be created. If this checkbox is not selected, files are saved directly in the folder specified in Save in.
Password security settings · File name · Save in

Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Mail Dialog Box
Click Attach to E-mail on the Custom Scan with One-click tab or click Mail in the One-click Mode screen to open the Mail dialog box.

Select the type of document to be scanned.
Select how to scan the document.
Select the size of the document to be scanned. When you select Custom, a screen in which you can specify the document size appears. Select a Units, then enter the Width and Height and click OK.
When you select Auto Detect, the image may not be scanned at the correct position and size. In that case, change the size to the actual document size (A4, Letter, etc.) and align a corner of the document with the corner at the arrow of the Platen.
Select the resolution at which to scan documents.
Use the scanner driver

Select this checkbox to display the ScanGear (scanner driver) screen and make advanced scan settings.
Specify...
Click to open the Scan Settings dialog box in which you can make advanced scan settings.
Scan Settings Dialog Box
Select a size from Small (fits in a 640 by 480 window), Medium (fits in a 800 by 600 window), Large (fits in a 1024 by 768 window) and Original.
Enter the file name of the image to be saved (up to 32 characters). When saving multiple files, 4 digits are appended to each file name.
Select a file type to save the scanned images. Select JPEG/Exif, PDF or PDF(Multiple Pages).
You cannot set passwords for PDF files.
Set...
You can specify a compression type for JPEG files. Select High(Low Compression), Standard or Low(High Compression).
Displays the folder in which to save the scanned images. To change the folder, click Browse... to specify another one. The following folders are specified by default. Windows Vista: MP Navigator EX folder in Picture folder Windows XP: MP Navigator EX folder in My Pictures folder Windows 2000: MP Navigator EX folder in My Pictures folder
Save to a Subfolder with Current Date
Select this checkbox to create a subfolder in the folder specified in Save in with the current date and save scanned files in it. A subfolder with a name such as "2009_01_01" (Year_Month_Date) will be created. If this checkbox is not selected, files are saved directly in the folder specified in Save in.
Specify an e-mail software program.
Select Add... to open the Select Mail Program dialog box in which you can select an e-mail software program. If the e-mail software program you want to use is not listed, click Add to List and select it.

Start scanning by clicking the one-click button

Select this checkbox to start scanning when you click an icon.
Saves and applies the specified settings. Click Cancel instead of Apply to cancel the specified settings.
Cancels the specified settings. The current screen closes.
Returns all settings in the screen to their defaults.
Scans documents with the specified settings. When scanning is completed, the e-mail software program starts automatically and a new message screen appears with the image attached.

Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > OCR Dialog Box
Click OCR on the Custom Scan with One-click tab or in the One-click Mode screen to open the OCR dialog box.

Select the type of document to be scanned.
Select how to scan the document.
Select the size of the document to be scanned. When you select Custom, a screen in which you can specify the document size appears. Select a Units, then enter the Width and Height and click OK.
Select the resolution at which to scan documents.
Use the scanner driver
Select this checkbox to display the ScanGear (scanner driver) screen and make advanced scan settings.
Specify...
Click to open the Scan Settings dialog box in which you can make advanced scan settings.

Scan Settings Dialog Box
When scanning slanted documents, select the Correct slanted document checkbox to improve the text recognition accuracy.
Enter the file name of the image to be saved (up to 32 characters). When saving multiple files, 4 digits are appended to each file name.
Select a file type to save the scanned images. Select JPEG/Exif, TIFF or BMP.
Set...
You can specify a compression type for JPEG files. Select High(Low Compression), Standard or Low(High Compression).
Displays the folder in which to save the scanned images. To change the folder, click Browse... to specify another one. The following folders are specified by default. Windows Vista: MP Navigator EX folder in Picture folder Windows XP: MP Navigator EX folder in My Pictures folder Windows 2000: MP Navigator EX folder in My Pictures folder
Save to a Subfolder with Current Date
Select this checkbox to create a subfolder in the folder specified in Save in with the current date and save scanned files in it. A subfolder with a name such as "2009_01_01" (Year_Month_Date) will be created. If this checkbox is not selected, files are saved directly in the folder specified in Save in.
Specify an OCR application. When MP Navigator EX is specified, after the image is scanned, the text in the image is extracted and appears in Notepad (included with Windows).
Only text written in languages that can be selected on the General tab can be extracted to Notepad (included with Windows). Click Set... on the General tab and specify the language according to the language of the document to be scanned. When scanning multiple documents, you can collect the extracted text into one file.
General Tab Text displayed in Notepad (included with Windows) is for guidance only. Text in the image of the following types of documents may not be detected correctly. - Documents containing text with font size outside the range of 8 points to 40 points (at 300 dpi) - Slanted documents - Documents placed upside down or documents with text in the wrong orientation (rotated characters) - Documents containing special fonts, effects, italics, or hand-written text - Documents with narrow line spacing - Documents with colors in the background of text - Documents containing multiple languages
Cancels the application setting.
Set...
Allows you to select an application.

Depending on the specified application, the text may not be extracted correctly or the application may not start.
Start scanning by clicking the one-click button
Select this checkbox to start scanning when you click an icon.
Saves and applies the specified settings. Click Cancel instead of Apply to cancel the specified settings.
Cancels the specified settings. The current screen closes.
Returns all settings in the screen to their defaults.
Scans documents with the specified settings.

Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Custom Dialog Box
Click Custom on the Custom Scan with One-click tab or in the One-click Mode screen to open the Custom dialog box.

Select the type of document to be scanned. When Auto Mode is selected, the document type is automatically detected. In that case, Color Mode, Document Size and Resolution are automatically set as well.
The following types of documents cannot be scanned correctly with Auto Mode. In that case, specify Document Type. - Documents other than photos, Hagaki, business cards, magazines, newspapers, text documents and CD/DVD - A4 photos - Text documents smaller than 2L (5 inches x 7 inches) (127 mm x 178 mm), such as paperback pages with the spine cut off - Documents printed on thin white paper - Wide documents such as panoramic photos Reflective CD/DVD labels may not be scanned properly. Place documents correctly according to the type of document to be scanned. Otherwise, documents may not be scanned correctly. See "Placing Documents" for details on how to place documents. Scanning takes longer than usual when scanning from the ADF (Auto Document Feeder) for the first time with Auto Mode. When scanning two or more documents from the ADF (Auto Document Feeder), you cannot scan documents of different sizes at one time even if Auto Mode is set.
Document Type

To reduce moire, set Document Type to Magazine.
Select how to scan the document.
Select the size of the document to be scanned. When you select Custom, a screen in which you can specify the document size appears. Select a Units, then enter the Width and Height and click OK.
When you select Auto Detect, the image may not be scanned at the correct position and size. In that case, change the size to the actual document size (A4, Letter, etc.) and align a corner of the document with the corner at the arrow of the Platen.
Select the resolution at which to scan documents.
Use the scanner driver
Select this checkbox to display the ScanGear (scanner driver) screen and make advanced scan settings.
Specify...
Click to open the Scan Settings dialog box in which you can make advanced scan settings.
Scan Settings Dialog Box
Automatically save the image to your computer after scanning it
Select this to save the images to your computer as specified after scanning them.
If an application to start is specified in Application Settings, the scanned image opens in the specified application.
Enter the file name of the image to be saved (up to 32 characters). When saving multiple files, 4 digits are appended to each file name.
Select a file type to save the scanned images. Select Auto, JPEG/Exif, TIFF or BMP. Auto is displayed and selected by default when Document Type is Auto Mode.
When Document Type is Auto Mode and Save as type is Auto, the file format may differ depending on how you place the document. See "Placing Documents" for details on how to place documents. Large documents (such as A4 photos) that cannot be placed away from the edges/arrow of the Platen may not be saved in the correct file format when Save as type is Auto. In that case, select a file format suitable for the document to be scanned.
When Auto is selected, files are saved in the following formats according to the document type. Photos, Hagaki, business cards and CD/DVD: JPEG Magazines, newspapers and text documents: PDF You can change the file format from Set

Images saved as PDF files may not open depending on the application. In that case, select an option other than PDF in Save as type. If you select JPEG/Exif, the Save the JPEG/Exif file in AdobeRGB checkbox will be selectable.
Set...
You can specify the file format in which to save images. Select a file format for Document and Photo each.
You can specify a compression type for JPEG files. Select High(Low Compression), Standard or Low(High Compression).
Displays the folder in which to save the scanned images. To change the folder, click Browse... to specify another one. The following folders are specified by default. Windows Vista: MP Navigator EX folder in Picture folder Windows XP: MP Navigator EX folder in My Pictures folder Windows 2000: MP Navigator EX folder in My Pictures folder
Save to a Subfolder with Current Date
Select this checkbox to create a subfolder in the folder specified in Save in with the current date and save scanned files in it. A subfolder with a name such as "2009_01_01" (Year_Month_Date) will be created. If this checkbox is not selected, files are saved directly in the folder specified in Save in.
Save the JPEG/Exif file in AdobeRGB
Select this checkbox to save the images in colors that correspond to Adobe RGB.
This function is available only when Save as type is JPEG/Exif. This function is not available if the Adobe RGB profile is not installed.
You cannot select this setting if the Use the scanner driver checkbox is selected. When you save an image with the Save the JPEG/Exif file in AdobeRGB checkbox selected, an underscore is added to the beginning of the file name. (Example: _Image0001.jpg)
Open the save dialog box after scanning the image (Input Exif information)
Select this to open the Save dialog box after scanning the images and specify the save settings such as destination folder, file name and Exif information.
Specify an application with which to open scanned images. Drag and drop the icon of an application that supports the file format displayed in Save as type. The specified application starts after images are scanned.
Depending on the specified application, the images may not appear correctly or the application may not start.
Cancels the application setting.
Set...
Allows you to select an application to start.
Start scanning by clicking the one-click button

Select this checkbox to start scanning when you click an icon.
Saves and applies the specified settings. Click Cancel instead of Apply to cancel the specified settings.
Cancels the specified settings. The current screen closes.
Returns all settings in the screen to their defaults.
Scans and saves documents with the specified settings. When Save as type is Auto, a confirmation appears. Click Open Manual to open this guide (if it is installed).

Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Preferences Dialog Box
Click Preferences to open the Preferences dialog box.
In the Preferences dialog box, you can make advanced settings to MP Navigator EX functions via the General and Scanner Button Settings tabs.

See the corresponding sections below for details on each tab.
Scanner Button Settings Tab (Save)
General Tab

Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > General Tab
On the General tab, you can specify general MP Navigator EX settings.

Displays the product name of the machine that MP Navigator EX is currently configured to use. If the displayed product is not the one you want to use, select the desired product from the list.
Save in (My Box)
Displays the folder in which to save scanned documents. To change the folder, click Browse... to specify another one. The following folders are specified by default. Windows Vista: MP Navigator EX folder in Picture folder Windows XP: MP Navigator EX folder in My Pictures folder Windows 2000: MP Navigator EX folder in My Pictures folder
Location of Temporary Files
Displays the folder in which to save images temporarily. To change the folder, click Browse... to specify another one.
An error may occur if you set the destination to the root directory of the drive on which the operating system is installed. Be sure to specify a folder. An error may occur if you set the destination to a network folder. Be sure to specify a local folder.
Displays the applications that can be started via MP Navigator EX. Install the applications from the Setup CD-ROM that accompanies the machine. For Attach to E-mail, you can select an e-mail software program to start. For Open PDF file, the application associated with the .pdf file extension by the operating system is displayed.
You can change which items are installed during installation from the Setup CD-ROM by selecting Custom Install. If you choose not to install some applications with Custom Install, the
Product Name · Application to run

corresponding MP Navigator EX functions will be unavailable. To use those functions, install the corresponding applications.
For Convert to text file, Notepad (included with Windows) is displayed. Click Set... to open a dialog box, then specify Document Language and how to scan multiple documents.

Document Language Specify the language according to the language of the document to be scanned. Only text written in languages that can be selected in the Document Language can be extracted to Notepad. Combine multiple text conversion results When scanning multiple documents, select the checkbox to collect the conversion results (text) into one file. This checkbox is selected by default. When the checkbox is selected, you can scan up to 99 pages at one time. Deselect the checkbox to display each conversion result (text) in a separate file. When the checkbox is not selected, you can scan up to 10 pages at one time.

Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Scanner Button Settings Tab (Save)
On the Scanner Button Settings tab, you can specify the following settings.
You can specify how to respond when scanning using the Operation Panel of the machine.

Save to PC is set.
Auto Mode is set. The document type is automatically detected.
The following types of documents cannot be scanned correctly with Auto Mode. In that case, specify Document Type. - Documents other than photos, Hagaki, business cards, magazines, newspapers, text documents and CD/DVD - A4 photos - Text documents smaller than 2L (5 inches x 7 inches) (127 mm x 178 mm), such as paperback pages with the spine cut off - Documents printed on thin white paper - Wide documents such as panoramic photos Reflective CD/DVD labels may not be scanned properly. Place documents correctly according to the type of document to be scanned. Otherwise, documents may not be scanned correctly. See "Placing Documents" for details on how to place documents. Scanning takes longer than usual when scanning from the ADF (Auto Document Feeder) for the first time. When scanning two or more documents from the ADF (Auto Document Feeder), you cannot scan documents of different sizes at one time.
This setting is automatically set.
This setting is automatically set.

Specify...
Click to open the Scan Settings dialog box in which you can make advanced scan settings.
Scan Settings Dialog Box
Automatically save the image to your computer after scanning it
Select this to save the images to your computer as specified after scanning them. The File Name, Save as type and Save in settings will be displayed.
If you select this function, you will not be able to set passwords for PDF files.
Enter the file name of the image to be saved (up to 32 characters).
Select a file type to save the scanned images. Select Auto, JPEG/Exif, TIFF or BMP. Auto is displayed by default.
When Document Type is Auto Mode and Save as type is Auto, the file format may differ depending on how you place the document. See "Placing Documents" for details on how to place documents. Large documents (such as A4 photos) that cannot be placed away from the edges/arrow of the Platen may not be saved in the correct file format when Save as type is Auto. In that case, select a file format suitable for the document to be scanned.
When Auto is selected, files are saved in the following formats according to the document type. Photos, Hagaki, business cards and CD/DVD: JPEG Magazines, newspapers and text documents: PDF You can change the file format from Set Images saved as PDF files may not open depending on the application. In that case, select an option other than PDF in Save as type.
Set...
When Save as type is Auto
You can specify the file format in which to save images. Select a file format for saving Document and Photo each.
When Save as type is JPEG/Exif
You can specify a compression type for JPEG files. Select High(Low Compression), Standard or Low(High Compression).
Displays the folder in which to save the scanned images. To change the folder, click Browse... to specify another one. The following folders are specified by default. Windows Vista: MP Navigator EX folder in Picture folder Windows XP: MP Navigator EX folder in My Pictures folder Windows 2000: MP Navigator EX folder in My Pictures folder
Save to a Subfolder with Current Date
Select this checkbox to create a subfolder in the folder specified in Save in with the current date and save scanned files in it. A subfolder with a name such as "2009_01_01" (Year_Month_Date) will be created. If this checkbox is not selected, files are saved directly in the folder specified in Save in.
Open the save dialog box after scanning the image
Select this to open the save dialog box after scanning the images and specify the save settings such as destination folder, file name and Exif information.
File Name · Save as type · Save in

See "Save Dialog Box" for details.

Advanced Guide > Scanning > Scanning with the Bundled Application Software > Appendix: Opening Files Other than Scanned Images
You can save or print data other than scanned images using MP Navigator EX.
Using images saved on a computer
Opening Images Saved on a Computer

Advanced Guide > Scanning > Scanning with the Bundled Application Software > Appendix: Opening Files Other than Scanned Images > Opening Images Saved on a Computer
You can open images saved on a computer and print them or attach them to e-mail using MP Navigator EX. You can also edit them using an application that accompanies the machine.
Starting MP Navigator EX
Click My Box (Scanned/Imported Images) to open images saved in My Box (Scanned/Imported Images), click Specify Folder to open images saved in a specific folder, or click Recently Saved Images to open recently saved images.

If the Show this window at startup checkbox is not selected, the last used screen appears. If
the Scan/Import window is displayed, click
(View & Use) on the upper left of the screen. The View & Use window opens. See "View & Use Images on your Computer Tab" for details on the View & Use Images on your Computer tab.
Images saved in the folder appear in the Thumbnail window.

See the corresponding sections below for details on using images.

Advanced Guide > Scanning > Scanning with Other Application Software
What Is ScanGear (Scanner Driver)?
Scanning with Advanced Settings Using ScanGear (Scanner Driver)
Correcting Images and Adjusting Colors with ScanGear (Scanner Driver)
ScanGear (Scanner Driver) Screens

Advanced Guide > Scanning > Scanning with Other Application Software > What Is ScanGear (Scanner Driver)?
ScanGear (scanner driver) is software required for scanning documents. It enables you to specify the output size and make image corrections when scanning.
ScanGear (scanner driver) can be started from MP Navigator EX or from other applications that are compatible with a standard interface called TWAIN. (ScanGear (scanner driver) is a TWAIN-compatible driver.)
This software enables you to preview scan results or set document type and output size, etc. when scanning documents. It is useful when you want to scan in a specific color tone, as it allows you to make various corrections and adjust brightness, contrast, etc.
There are three modes: Basic Mode, Advanced Mode and Auto Scan Mode.
Switch modes by clicking a tab on the upper right of the screen.
ScanGear (scanner driver) starts in the last used mode. Settings are not retained when you switch between modes.
Use Basic Mode to scan easily by following three simple on-screen steps (
).

Use Advanced Mode to select color mode, specify resolution, correct images, adjust colors, etc. when scanning.
, · and


Use Auto Scan Mode to scan easily by simply placing documents on the Platen or ADF (Auto Document Feeder) and clicking Scan.


Page 496 of 817 pages Scanning with Advanced Settings Using ScanGear (Scanner Driver)
Advanced Guide > Scanning > Scanning with Other Application Software > Scanning with Advanced Settings Using ScanGear (Scanner Driver)
Starting ScanGear (scanner driver)
Starting ScanGear (Scanner Driver)
Scanning documents after making simple image corrections
Scanning in Basic Mode
Scanning documents after making advanced image corrections and brightness/color adjustments
Scanning in Advanced Mode
Scanning with a simple operation
Scanning in Auto Scan Mode
Scanning multiple documents placed on the ADF (Auto Document Feeder) after making advanced image corrections and brightness/color adjustments
Scanning Multiple Documents from the ADF (Auto Document Feeder) in Advanced Mode
Scanning multiple documents at one time after making image corrections and color adjustments
Scanning Multiple Documents at One Time in Advanced Mode

Advanced Guide > Scanning > Scanning with Other Application Software > Scanning with Advanced Settings Using ScanGear (Scanner Driver) > Starting ScanGear (Scanner Driver)
Use ScanGear (scanner driver) to make image corrections and color adjustments when scanning. ScanGear (scanner driver) can be started from MP Navigator EX or an application.
Follow these steps to start ScanGear (scanner driver).
Navigation Mode Screen
Follow these steps to start ScanGear (scanner driver) from the Navigation Mode screen of MP Navigator EX.
Starting MP Navigator EX
The Scan/Import window opens.

The ScanGear (scanner driver) screen appears.
Follow these steps to start ScanGear (scanner driver) from the One-click Mode screen of MP Navigator EX.
Starting MP Navigator EX
The corresponding dialog box opens.


The ScanGear (scanner driver) screen appears.
Use the scanner driver is not displayed in the PDF dialog box.
Follow these steps (example) to start ScanGear (scanner driver) from an application.
The procedure varies depending on the application. For details, refer to the application's manual.
The ScanGear (scanner driver) screen appears.

Advanced Guide > Scanning > Scanning with Other Application Software > Scanning with Advanced Settings Using ScanGear (Scanner Driver) > Scanning in Basic Mode
In Basic Mode, you can scan easily by following the on-screen steps.
When scanning from the ADF (Auto Document Feeder), documents are scanned without preview. Also, the paper size is set to A4.
Starting ScanGear (Scanner Driver)
When scanning from the Platen, place the document face-down on the Platen and align an upper corner of the document with the corner at the arrow of the Platen. See " Placing Documents (ADF (Auto Document Feeder)) " for details on how to place documents when scanning from the ADF (Auto Document Feeder).

Some applications do not support continuous scanning from the ADF (Auto Document Feeder). For details, refer to the application's manual.
To scan magazines containing many color photos, scan in Advanced Mode tab with Color Mode set to Color and Descreen set to ON.
Scanning in Advanced Mode
Preview image appears in the Preview area.


If you scan without preview, colors are adjusted based on the document type selected in Select Source.
Output size options vary by the items selected in Select Source and Destination.
Adjust the size and position of the scan area (cropping frame) on the preview image. You can also create two or more cropping frames.
If an area is not specified, the document will be scanned at the document size (Auto Crop). If an area is specified, only the portion in the specified area will be scanned.
Scanning starts.
(Information) to open a dialog box in which you can check the current scan settings (document type, etc.). ScanGear's response after scanning can be specified in Status of ScanGear dialog after scanning on the Scan tab of the Preferences dialog box.

Advanced Guide > Scanning > Scanning with Other Application Software > Scanning with Advanced Settings Using ScanGear (Scanner Driver) > Scanning in Advanced Mode
In Advanced Mode, you can specify the color mode, output resolution, image brightness, color tone, etc. when scanning.
This section explains how to scan paper/photos from the Platen. See " Scanning Multiple Documents from the ADF (Auto Document Feeder) in Advanced Mode " to scan multiple documents placed on the ADF (Auto Document Feeder).
Starting ScanGear (Scanner Driver)
Place the document face-down on the Platen and align an upper corner of the document with the corner at the arrow of the Platen.
The Advanced Mode tab appears.

Settings are not retained when you switch between modes.
Preview image appears in the Preview area.
Input Settings


If you scan without preview, the show-through reduction function will be active. This function is useful when scanning magazines. However, when scanning photos, the color tone of the scanned image may differ from the source due to the show-through reduction function. In that case, use preview first.
Scanning starts.
ScanGear's response after scanning can be specified in Status of ScanGear dialog after scanning on the Scan tab of the Preferences dialog box.

Advanced Guide > Scanning > Scanning with Other Application Software > Scanning with Advanced Settings Using ScanGear (Scanner Driver) > Scanning in Auto Scan Mode
You can scan easily in Auto Scan Mode of ScanGear (scanner driver) by letting it automatically determine the type of documents placed on the Platen or ADF (Auto Document Feeder).
Supported document types are photos, Hagaki, business cards, magazines, newspapers, text documents and CD/DVD. To scan other documents, specify the document type on the Basic Mode tab or the Advanced Mode tab.
Scanning in Basic Mode
Scanning in Advanced Mode Place documents of the same size when scanning two or more documents from the ADF (Auto Document Feeder).
Starting ScanGear (Scanner Driver)
The Auto Scan Mode tab appears.
Scanning starts.
ScanGear's response after scanning can be specified in Status of ScanGear dialog after scanning on the Scan tab of the Preferences dialog box.
Auto Scan Mode Tab
Placing Documents · Scan Tab

Page 504 of 817 pages Scanning Multiple Documents from the ADF (Auto Document Feeder) in Ad...
Advanced Guide > Scanning > Scanning with Other Application Software > Scanning with Advanced Settings Using ScanGear (Scanner Driver) > Scanning Multiple Documents from the ADF (Auto Document Feeder) in Advanced Mode
In Advanced Mode, you can specify the image brightness, color tone, etc. and scan multiple documents placed on the ADF (Auto Document Feeder) at one time.
When scanning from the ADF (Auto Document Feeder), documents are scanned without preview.
Placing Documents (ADF (Auto Document Feeder))
Starting ScanGear (Scanner Driver)

Settings are not retained when you switch between modes.
See the corresponding sections below for details on Image Settings and the Color Adjustment Buttons.

Page 505 of 817 pages Scanning Multiple Documents from the ADF (Auto Document Feeder) in Ad...
Scanning starts.
ScanGear's response after scanning can be specified in Status of ScanGear dialog after scanning on the Scan tab of the Preferences dialog box.
Scan Tab · Advanced Mode Tab

Page 506 of 817 pages Scanning Multiple Documents at One Time in Advanced Mode
Advanced Guide > Scanning > Scanning with Other Application Software > Scanning with Advanced Settings Using ScanGear (Scanner Driver) > Scanning Multiple Documents at One Time in Advanced Mode
You can scan two or more photos (small documents) on the Platen at one time by using Multi-Crop in Advanced Mode tab of ScanGear (scanner driver).
The following types of documents cannot be cropped correctly. - Documents smaller than 1.18 inches (3 cm) square - Photos that have been cut to various shapes The following types of documents may not be cropped correctly. In that case, start ScanGear (scanner driver), then adjust the cropping frame on the Advanced Mode tab and scan again. - Photos that have a whitish border - Documents printed on white paper, hand-written text, business cards, etc. - Thin documents - Thick documents
Scanning in Advanced Mode
Starting ScanGear (Scanner Driver)
The Advanced Mode tab appears.

Preview image appears in the Preview area.
Placing Documents

Page 507 of 817 pages Scanning Multiple Documents at One Time in Advanced Mode

Each image is cropped (scan area is specified) automatically according to the document size.

If you do not want to scan one, select the image and press the Delete key. Alternatively, select the
(Remove Cropping Frame) on the Toolbar.
When you click Multi-Crop, Multi-Crop changes to Reset. Click Reset to cancel Multi Crop. Cancel Multi Crop to create custom cropping frames.
The settings are applied to all cropping frames.

Page 508 of 817 pages Scanning Multiple Documents at One Time in Advanced Mode
The settings are applied to all cropping frames.
Each cropping frame is scanned as an individual image.
ScanGear's response after scanning can be specified in Status of ScanGear dialog after scanning on the Scan tab of the Preferences dialog box.
Image Settings · Scan Tab

Page 509 of 817 pages Correcting Images and Adjusting Colors with ScanGear (Scanner Driver)
Advanced Guide > Scanning > Scanning with Other Application Software > Correcting Images and Adjusting Colors with ScanGear (Scanner Driver)
The following sections provide you with tips and know-how on advanced scanning techniques involving color/brightness adjustment, etc.
Sharpening out-of-focus photos, reducing dust and scratches, and correcting faded colors
Correcting Images (Unsharp Mask, Reduce Dust and Scratches, Fading Correction, etc.)
Previewing and changing the color tone of the entire image to scan
Adjusting Colors Using a Color Pattern
Brightening colors that have faded with time or due to colorcast
Adjusting Saturation and Color Balance
Adjusting images that are too dark or bright, or too flat due to lack of contrast
Adjusting Brightness and Contrast
Adjusting the color tone using histogram (a graph showing brightness distribution)
Adjusting the image brightness using tone curve (a graph of brightness balance)
Sharpening characters in text documents or reducing show-through effects
Adjusting Histogram · Adjusting Tone Curve · Setting Threshold

Page 510 of 817 pages Correcting Images (Unsharp Mask, Reduce Dust and Scratches, Fading Co...
Advanced Guide > Scanning > Scanning with Other Application Software > Correcting Images and Adjusting Colors with ScanGear (Scanner Driver) > Correcting Images (Unsharp Mask, Reduce Dust and Scratches, Fading Correction, etc.)
The Image Settings functions in Advanced Mode tab of ScanGear (scanner driver) allow you to enhance the outline of the subjects, reduce dust/scratches and correct faded colors when scanning images.

of a function and select an item from the pull-down menu.
Do not apply these functions to images without moire, dust/scratches or faded colors. The color tone may be adversely affected. See the section below for details and precautions on each function.
See the section below to start ScanGear (scanner driver) in Advanced Mode tab and scan.
Scanning in Advanced Mode
Set Auto Tone to ON.
Click · Image Settings

Page 511 of 817 pages Correcting Images (Unsharp Mask, Reduce Dust and Scratches, Fading Co...


Reducing show-through in text documents or lightening the base color in recycled paper, newspapers, etc. when scanning from the ADF (Auto Document Feeder)
Set Reduce Show-through to Low or High according to the degree of show-through or darkness of the base color.


Set Unsharp Mask to ON.


Set Descreen to ON.


"Moire" is a phenomenon where uneven gradation or a stripe pattern appears when such photos or pictures printed with fine dots are scanned. Descreen is the function for reducing this moire effect.
Set Reduce Dust and Scratches to Low, Medium or High according to the degree of dust and scratches.
None Low · None Medium

Page 512 of 817 pages Correcting Images (Unsharp Mask, Reduce Dust and Scratches, Fading Co...


Set Fading Correction to Low, Medium or High according to the degree of fading or colorcast.


Set Grain Correction to Low, Medium or High according to the degree of graininess.


Set Backlight Correction to Low, Medium or High according to the degree of backlight.


Set Gutter Shadow Correction to Low, Medium or High according to the degree of shadows.



Advanced Guide > Scanning > Scanning with Other Application Software > Correcting Images and Adjusting Colors with ScanGear (Scanner Driver) > Adjusting Colors Using a Color Pattern
You can preview color changes and reproduce natural colors by using the Color Pattern function in ScanGear's Basic Mode tab.


Correct colors that have faded with time or due to colorcast. Colorcast is a phenomenon where a specific color affects the entire picture due to the weather or ambient strong colors.
Click an arrow in Color Adjustment to emphasize the corresponding color.
Cyan & red, magenta & green and yellow & blue are complementary color pairs (each pair produces a shade of gray when mixed). You can reproduce the natural colors of the scene by reducing the cast color and increasing the complementary color.
It is recommended that you find a portion in the image where it should be white, and adjust the colors so that the portion turns white.

Preview image appears in the center. Preview image colors change as you adjust them.

Below is an example of correcting a bluish image.
Since Blue and Green are too strong, click the Yellow and Magenta arrows to correct.


Color adjustments are applied only to the scan area (cropping frame). You can also select a color tone from the color pattern displayed on the left of the Color Pattern screen. You can also use this function to add a specific tint to an image. Increase the magenta to add a warm tint, and increase the blue to add a cool tint.
Before After

Advanced Guide > Scanning > Scanning with Other Application Software > Correcting Images and Adjusting Colors with ScanGear (Scanner Driver) > Adjusting Saturation and Color Balance
In ScanGear's Advanced Mode tab, click
(Saturation/Color Balance).


Click Defaults to reset all adjustments in the current window.
Adjust the image's saturation (vividness). You can brighten colors that have faded with time, etc.
(slider) under Saturation to the left to reduce the saturation (darken the image), and to the right to increase the saturation (brighten the image). You can also enter a value (-127 to 127).
Saturation decreased Original image Saturation increased



The natural color tone of the original image may be lost if you increase saturation too much.
Adjust images that have a colorcast. Colorcast is a phenomenon where a specific color affects the entire picture due to the weather or ambient strong colors.
(slider) under each color pair to the left or right to emphasize the corresponding color.
Move · Move · Cyan & Red

These are complementary color pairs (each pair produces a shade of gray when mixed). You can reproduce the natural colors of the scene by reducing the cast color and increasing the complementary color.
It is usually difficult to correct the image completely by adjusting only one color pair. It is recommended that you find a portion in the image where it should be white, and adjust all three color pairs so that the portion turns white.
You can also enter a value (-127 to 127).
Below is an example of an image in which the "Cyan & Red" pair has been adjusted.

Cyan is increased Red is increased


Magenta & Green · Yellow & Blue

Advanced Guide > Scanning > Scanning with Other Application Software > Correcting Images and Adjusting Colors with ScanGear (Scanner Driver) > Adjusting Brightness and Contrast
In ScanGear's Advanced Mode tab, click
(Brightness/Contrast).


to return to the previous view. Click Defaults to reset all adjustments in the current window.
to switch to detailed view. Click
Each dot of an image is a mixture of Red, Green and Blue in various proportions (gradation). These colors can be adjusted individually as a "channel."
Adjust the Red, Green and Blue combined.
Adjust the Red channel.
Adjust the Green channel.
Adjust the Blue channel.
Only Grayscale will be displayed in Channel when Color Mode is Grayscale.

Adjust the image brightness. Move
(slider) under Brightness to the left to darken and right to brighten the image. You can also enter a value (-127 to 127).

Darkened Original image Brightened


Highlights may be lost if you brighten the image too much, and shadows may be lost if you darken the image too much.
Contrast is the degree of difference between the brighter and darker parts of an image. Increasing contrast will increase the difference, thus sharpening the image. Decreasing contrast will decrease the difference, thus softening the image.
(slider) under Contrast to the left to decrease and right to increase the contrast of the image. You can also enter a value (-127 to 127).

Decreased contrast Original image Increased contrast


Increasing the contrast is effective in adding a three-dimensional feel to soft images. However, shadows and highlights may be lost if you increase the contrast too much.
Brightness · Contrast · Move

Advanced Guide > Scanning > Scanning with Other Application Software > Correcting Images and Adjusting Colors with ScanGear (Scanner Driver) > Adjusting Histogram
In ScanGear's Advanced Mode tab, click
(Histogram).


Click Defaults to reset all adjustments in the current window.
Each dot of an image is a mixture of Red, Green and Blue in various proportions (gradation). These colors can be adjusted individually as a "channel."
Adjust the Red, Green and Blue combined.
Adjust the Red channel.
Adjust the Green channel.
Adjust the Blue channel.
Only Grayscale will be displayed in Channel when Color Mode is Grayscale.
You can open Histogram of a specified area for each Channel. The higher the Histogram peak, the more data is distributed to that level.


(1) Bright area (2) Dark area (3) Whole image
More data is distributed to the highlight side.
More data is distributed to the shadow side.
Data is widely distributed between the highlight and shadow.
Select a Channel, then move
(White-point Slider) to specify the level to be set as the shadow or highlight.
- All parts to the left of
(Black-point Slider) will be black (level 0).
- The parts at
(Mid-point Slider) will turn to the color exactly between the black-point and white-point.
- All parts to the right of
(White-point Slider) will turn white (level 255).
Auto Tone is set to ON by default. Adjustments shown below are automatically performed.
Move the Black-point Slider or White-point Slider to adjust brightness.
Images with more data distributed to the highlight side
Move the Black-point Slider toward the highlight side.


Images with more data distributed to the shadow side
Move the White-point Slider toward the shadow side.


Images with widely distributed data
Move the Black-point Slider toward the highlight side, and White-point Slider toward the shadow side.


Move the Mid-point Slider to specify the level to be set as the middle of the tonal range.
(Black-point Slider) or

Images with more data distributed to the highlight side
Move the Mid-point Slider toward the highlight side.


Images with more data distributed to the shadow side
Move the Mid-point Slider toward the shadow side.

When you select a Channel and click the Black-point, Mid-point or White-point Dropper, the mouse pointer on the preview image changes to a dropper. Click a Dropper displayed below the histogram to change the setting.
- The point clicked with
(Black-point Dropper) will be the darkest point. You can also enter a value (0 to 245).
- The point clicked with
(Mid-point Dropper) will be the middle of the tonal range. You can also enter a value (5 to 250).
- The point clicked with
(White-point Dropper) will be the brightest point. You can also enter a value (10 to 255).
for Gray Balance and click the area you want to adjust the color in the preview image.
The clicked point will be set as the achromatic color reference, and the rest of the image is adjusted accordingly. For instance, if snow in a photo appears bluish, click the bluish part to adjust the whole image and reproduce natural colors.
- Click

Advanced Guide > Scanning > Scanning with Other Application Software > Correcting Images and Adjusting Colors with ScanGear (Scanner Driver) > Adjusting Tone Curve
In ScanGear's Advanced Mode tab, click
(Tone Curve Settings).

Click Defaults to reset all adjustments in the current window.
Each dot of an image is a mixture of Red, Green and Blue in various proportions (gradation). These colors can be adjusted individually as a "channel."
Adjust the Red, Green and Blue combined.
Adjust the Red channel.
Adjust the Green channel.
Adjust the Blue channel.
Only Grayscale will be displayed in Channel when Color Mode is Grayscale.
With ScanGear (scanner driver), scanning images via a scanner is the input, and displaying to a monitor is the output. Tone Curve shows the balance of tone input and output for each Channel.


In Select Tone Curve, select a tone curve from No correction, Overexposure, Underexposure, High contrast, Reverse the negative/positive image and Edit custom curve.


The midtone data of the input side is stretched toward the highlight of the output side, resulting in a bright-toned image when viewed on a monitor.

The midtone data of the input side is stretched toward the shadow of the output side, resulting in a dark- toned image when viewed on a monitor.

The highlight and shadow of the input side are enhanced, resulting in a high-contrast image.

The input and output sides are reversed, resulting in a negative-positive inverted image.


You can drag specific points on the Tone Curve to freely adjust the brightness of the corresponding areas.

Advanced Guide > Scanning > Scanning with Other Application Software > Correcting Images and Adjusting Colors with ScanGear (Scanner Driver) > Setting Threshold
The brightness of color and grayscale images is expressed in a value between 0 and 255. However, in creating black and white images, all colors are mapped to either black (0) or white (255). Threshold is the borderline value that determines a color as black or white. By adjusting the threshold level, you can sharpen text in a document or reduce show-through in newspapers.
This function is available when Color Mode is Black and White.
In ScanGear's Advanced Mode tab, click
(Threshold).


Click Defaults to reset all adjustments in the current window.
(slider) to the right to increase the threshold value and thus increase the black areas. Move the slider to the left to decrease the value and thus increase the white areas. You can also enter a value (0 to 255).

Move

Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens
The following sections describe ScanGear's screens and functions, and how to use ScanGear (scanner driver).
Input Settings Output Settings Image Settings Color Adjustment Buttons
Auto Scan Mode Tab
Scanner Tab Preview Tab Scan Tab Color Settings Tab
Basic Mode Tab · Advanced Mode Tab · Preferences Dialog Box

Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Basic Mode Tab
This mode allows you to scan easily by following the on-screen steps.
This section describes the settings and functions available in Basic Mode.
When scanning from the ADF (Auto Document Feeder), documents are scanned without preview. Also, the paper size is set to A4.

(1) Settings and Operation Buttons
The displayed items vary by document type and how the screen was opened.
Scan color photos.
Scan color magazines.
Scan text and line drawings in black and white.
Scan photos and documents in black and white. Select this mode to create high-resolution black and white images.
Scan documents from the ADF (Auto Document Feeder) in color.
Scan documents from the ADF (Auto Document Feeder) in black and white.
Some applications do not support continuous scanning from the ADF (Auto Document Feeder).

For details, refer to the application's manual.
If you select an option other than Newspaper(Grayscale), the Unsharp Mask function will be active. If you select Photo(Color), Magazine(Color) or Document(Grayscale), the Auto Tone function will be active by default. However, if you disable Always Execute the Auto Tone on the Color Settings tab of the Preferences dialog box, the Auto Tone function will be disabled. If you select Magazine(Color), the Descreen function will be active.
Click Preview to perform a trial scan. The scanned document appears in the Preview area. A cropping frame (scan area) is displayed according to the document size.

If you scan without preview, colors are adjusted based on the document type selected in Select Source. When using the machine for the first time, scanner calibration starts automatically. Wait a while until the preview image appears.
Select what you want to do with the scanned image.
Select this to print the scanned image on a printer.
Select this to view the scanned image on a monitor.
Select this to use the scanned image with OCR software. OCR software is software that converts text scanned as an image into text data that can be edited in word processors and other programs.
Select an output size. Output size options vary by the item selected in Destination.
When a cropping frame is displayed, the portion within the cropping frame will be scanned at 100%. When no cropping frame is displayed, the entire Preview area will be scanned.
Paper Size (L, A4, etc.)
Select an output paper size. The portion within the cropping frame will be scanned at the size of the selected paper size. You can drag the cropping frame to enlarge/reduce it while maintaining the aspect ratio.
Monitor Size (1024 x 768 pixels, etc.)

Select an output size in pixels. A cropping frame of the selected monitor size will be displayed and the portion within the cropping frame will be scanned. You can drag the cropping frame to enlarge/reduce it while maintaining the aspect ratio.
Add/Delete...
Opens the Add/Delete the Output Size dialog box, in which you can save custom output sizes. You can select this option when Destination is Print or Image display.

In the Add/Delete the Output Size dialog box, you can specify multiple output sizes and save them at one time. Saved items appear in the Output Size list along with the predefined items.
To add a size, enter Output Size Name, Width and Height, then click Add. For Unit, you can select mm or inches when Destination is Print but you can only select pixels when Destination is Image display. The name of the added size appears in Output Size List. Click Save to save the items listed in Output Size List.
To delete an item, select it in Output Size List and click Delete. Click Save to save the items listed in Output Size List.
You cannot delete predefined output sizes such as A4 and 1024 x 768 pixels.
Save up to 10 output sizes to Output Size List. An error message appears when you enter a value outside the setting range. Enter a value within the setting range.
This function is not available when an ADF type is selected for Select Source.
Whether or how the cropping frame is initially displayed on a preview image can be specified on the Preview tab of the Preferences dialog box. See Cropping Frame on Previewed Images in "Preview Tab."
This button is available when Output Size is set to anything but Flexible. Click this button to rotate the cropping frame. Click again to return it to the original orientation.
You can adjust the scan area within the Preview area. If an area is not specified, the document will be scanned at the document size (Auto Crop). If an area is specified, only the portion in the cropping frame will be scanned.


Corrects and scans photos that have faded with time or have a colorcast.
Corrects photos that have been shot against light.
Corrects shadows that appear between pages when scanning open booklets.
For precautions on using this function, see Gutter Shadow Correction in " Image Settings
" (Advanced Mode tab).
Color Pattern...
Allows you to adjust the image's overall color. You can correct colors that have faded due to colorcast, etc. and reproduce natural colors while previewing color changes.
Adjusting Colors Using a Color Pattern
Click Scan to start scanning.
When scanning starts, the progress will be displayed. Click Cancel to cancel the scan.
Preferences...
The Preferences dialog box opens and you can make scan/preview settings.
Closes ScanGear (scanner driver).
You can rotate preview images using the Toolbar.

Displays and adjusts the cropping frame automatically to the size of the document displayed in the Preview area. The scan area is reduced every time you click this button if there are cropping area within the cropping frame.
Removes the selected cropping frame.
Rotates the preview image 90 degrees counter-clockwise. - The result will be reflected in the scanned image. - The image returns to its original state when you preview again.

Rotates the preview image 90 degrees clockwise. - The result will be reflected in the scanned image. - The image returns to its original state when you preview again.
Displays the version of ScanGear (scanner driver) and the current scan settings (document type, etc.).
This page appears.
This is where a trial image is displayed after you click Preview. You can specify the scan area (cropping frame) on the displayed image. You can also create two or more cropping frames.
Scanning in Basic Mode

Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Advanced Mode Tab
This mode allows you to make advanced scan settings such as the color mode, resolution, image brightness and color tone.
This section describes the settings and functions available in Advanced Mode.
When scanning from the ADF (Auto Document Feeder), documents are scanned without preview.

(1) Settings and Operation Buttons
The displayed items vary by document type and how the screen was opened.
You can name and save a group of settings (Input Settings, Output Settings, Image Settings and Color Adjustment Buttons), and load it as required. It is convenient to save a group of settings if you will be using it repeatedly. You can also use this to reload the default settings. Select Add/Delete... from the pull-down menu and the Add/Delete Favorite Settings dialog box opens.
(2) Toolbar · (3) Preview Area · Favorite Settings


Enter Setting Name and click Add. The name appears in Favorite Settings List. When you click Save, the item appears in the Favorite Settings list along with the predefined items.
You can set Add/Delete... in Favorite Settings after preview. Save up to 10 items to Favorite Settings List. To delete an item, select it in Favorite Settings List and click Delete. Click Save to save settings displayed in Favorite Settings List.
Specify the input settings such as the document type and size.
Specify the output settings such as the output resolution and size.
Enable/disable various image correction functions.
These buttons can be used to make fine corrections to the image brightness and color tones. You can adjust the image's overall brightness or contrast, and adjust its highlight and shadow values (histogram) or balance (tone curve).
Rescans the portion within the cropping frame at higher magnification. When the image is zoomed in, Zoom changes to Undo. Click Undo to return the display to its non-magnified state.
Zoom rescans the image and displays high-resolution image in Preview.
(Enlarge/Reduce) on the Toolbar zooms in on the preview image quickly. However, the resolution of the displayed image will be low.
Performs a trial scan.


Starts scanning.
When scanning starts, the progress will be displayed. Click Cancel to cancel the scan. When scanning is completed, a dialog box prompting you to select the next action may open. Follow the prompt to complete. For details, see Status of ScanGear dialog after scanning in "
Scan Tab" (Preferences dialog box). If the total size of the images to be scanned exceeds 100 MB, a message appears warning you that scanning may take time. Click OK to continue, or Cancel to cancel the scan.
Preferences...
The Preferences dialog box opens and you can make scan/preview settings.
Closes ScanGear (scanner driver).
With the Advanced Mode tab Toolbar, you can make adjustments to the preview image and also select a part of the displayed image.

Click this button to delete the preview image. It also resets the Toolbar and color adjustment settings.
Allows you to specify the scan area by dragging the mouse.
If an enlarged image is too large to fit in the Preview area, you can click this button and drag the image across the screen until the part you want to see is displayed. You can also move the image using the scroll bars.

Click this button then click on the image to enlarge it (zoom in). Right-click on the image to reduce it (zoom out).
Rotates the preview image 90 degrees counter-clockwise. - The result will be reflected in the scanned image. - The image returns to its original state when you preview again.
Rotates the preview image 90 degrees clockwise. - The result will be reflected in the scanned image. - The image returns to its original state when you preview again.
Displays the version of ScanGear (scanner driver) and the current scan settings (document type, etc.).
This page appears.
Displays and adjusts the cropping frame automatically to the size of the document displayed in the Preview area. The scan area is reduced every time you click this button if there are cropping area within the cropping frame.
Removes the selected cropping frame.
This button is available when there are two or more cropping frames. All cropping frames will be displayed in thick broken lines. The settings will be applied to all the cropping frames.
Automatically detects and crops multiple documents placed on the Platen. You can remove the cropping frames of the images you do not want to scan.
See "Scanning Multiple Documents at One Time in Advanced Mode " to scan multiple documents at one time.
This is where a trial image is displayed after you click Preview. You can specify the scan area (cropping frame) on the displayed image. You can also create two or more cropping frames.
Scanning in Advanced Mode

Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Input Settings

Input Settings allows you to set the following items:
The type of document to be scanned is displayed. To scan from the Platen, select Platen. To scan from the ADF (Auto Document Feeder), select Document (ADF Simplex).
Even if you select to scan from the ADF (Auto Document Feeder), some applications do not support continuous scanning. For details, refer to the application's manual.
Select the size of the document to be scanned. When you select a size, the Preview area size changes accordingly.
Some applications have a limit to the amount of scan data they can receive. ScanGear (scanner driver) can scan data that is of: - 21000 pixels x 30000 pixels or less If you change Paper Size after previewing, the preview image will be deleted.
If you are not sure which size you should select for Paper Size, set Paper Size to Full Platen, then
measure the size of the document and enter the values into
(Height).
Specify the orientation of the documents to scan from the ADF (Auto Document Feeder). Click Settings... to open the Orientation dialog box.


The Orientation dialog box can only be opened when Select Source is Document (ADF Simplex).
Select how to scan the document.
Select this mode to scan color documents or to create color images. This mode renders the image in 256 levels (8 bit) of R(ed), G(reen), and B(lue).
Select this mode to scan black and white photos, or to create black and white images. This mode renders the image in 256 levels (8 bit) of black and white.
Select this mode to scan photos and other documents in black and white. This mode renders the image in black and white. The contrast in the image is divided at certain levels (threshold level)
into black and white and is rendered in two colors. The threshold level can be set with
(Threshold).
The Paper Size is displayed before preview. After preview, the cropping frame size is displayed.
You can adjust the cropping frame (scan area) size by entering the values into
(Height).
(Locked) to maintain the aspect ratio when you specify the cropping frame size.
(Keep Aspect Ratio) and change it to
Input size settings are available only when Output Size in Output Settings is Flexible. If you select a size other than Flexible, a cropping frame calculated from Output Size and Output Resolution is displayed, and its aspect ratio is fixed.
The values you can enter will be within the range of the selected document size. The minimum size is 96 pixels x 96 pixels when Output Resolution is 600 dpi and enlarge/reduce is 100%. When Auto Crop is performed, the aspect ratio will not be maintained since the size will be prioritized. See "Adjusting Cropping Frames" for details on cropping frames.

Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Output Settings

Output Settings allows you to set the following items:
Select the resolution to scan at. The higher the resolution (value), the more detail in your image. Select a resolution from the options displayed by clicking the button, or enter a value in 1 dpi increments.
You can enter a value within the range of 25 dpi to 19200 dpi.
You can enter a value within the range of 25 dpi to 600 dpi.
Select an output size. Select Flexible to set custom sizes or select a size for printing or displaying. Select Add/Delete... to set custom size and save it as a new output size option.
You can specify the output resolution and scale, and adjust the cropping frame. When no cropping frame is displayed, the entire Preview area will be scanned. When a cropping frame is displayed, the portion within the cropping frame will be scanned.
To enlarge/reduce the scanned image, enter values into
(Height) in Output Settings or specify a value (by 1%) for %. The maximum value available for % depends on the Output Resolution. % can be specified for up to 19200 dpi (the maximum available output resolution).
Paper Size (L, etc.) & Monitor Size (1024 x 768 pixels, etc.)

Width, height and scale cannot be specified. The preview image will be cropped according to the selected output size and resolution. The portion within the cropping frame will be scanned at the size of the selected paper/monitor size. You can drag the cropping frame to enlarge, reduce or move it while maintaining the aspect ratio.
Add/Delete...
Opens the Add/Delete the Output Size dialog box, in which you can save/delete custom output sizes.

In the Add/Delete the Output Size dialog box, you can specify multiple output sizes and save them at one time. Saved items appear in the Output Size list along with the predefined items.
To add a size, select Print or Image display for Destination, then enter Output Size Name, Width, and Height then click Add. The name of the added size appears in Output Size List. Click Save to save all the added items. Click Cancel to cancel all items that were added after you opened the Add/Delete the Output Size dialog box.
To delete an item, select it in Output Size List and click Delete. The deleted items will disappear from Output Size List. When you click Save, the items that disappeared from Output Size List will be deleted. When you click Cancel, they will not be deleted.
You cannot delete predefined output sizes such as A4 and 1024 x 768 pixels.
Save up to 10 output sizes to Output Size List for each destination. An error message appears when you enter a value outside the setting range. Enter a value within the range displayed in the message. Unit varies by Destination. For Print, select mm or inches. For Image display, the unit is pixels.
See "Adjusting Cropping Frames" for details on cropping frames. Whether or how the cropping frame is initially displayed on a preview image can be specified on the Preview tab of the Preferences dialog box. See Cropping Frame on Previewed Images in "
Preview Tab."
Rotate the cropping frame 90 degrees. Click again to return it to the original orientation.
An image file is created when the preview image is scanned. Its size when saved in BMP format is displayed.
When the file size is 100 MB or more, the value appears in red. In that case, a warning message appears when you click Scan. It is recommended that you change each settings to set Data Size to 99 MB or less, and than scan.

Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Image Settings

Do not apply these functions to images without moire, dust/scratches or faded colors. The color tone may be adversely affected. Image correction results may not be reflected in the preview image.
Selectable settings depend on color mode settings. Scanning may take longer when you use Image Settings.
Image Settings allows you to set the following items:
When this is set to ON, the brightness of the specified portion of the image is automatically optimized. The result of the color adjustment will be reflected in the entire image. This setting is ON by default.
You can set Auto Tone after preview. You can set this setting when Recommended is selected on the Color Settings tab of the Preferences dialog box. When you click Multi-Crop, this setting turns to ON and you cannot change it.
The color tone may change from the source image due to the Auto Tone function. In that case, set Auto Tone to OFF.
Reduce Show-through (when scanning from the ADF (Auto Document Feeder))
Use this function to reduce show-through in duplex documents or lighten the base color in recycled paper and other colored paper when scanning from the ADF (Auto Document Feeder). This setting is Low by default.
Auto Tone

Show-through will not be reduced.
Select this to reduce show-through in duplex documents or lighten the base color. It is recommended that you normally select this setting.
Select this when show-through is apparent. This can affect the tone of the image.
When this is set to ON, the outline of the subjects is emphasized to sharpen the image. This setting is ON by default.
Printed photos and pictures are displayed as a collection of fine dots. "Moire" is a phenomenon where uneven gradation or a stripe pattern appears when such photos or pictures printed with fine dots are scanned. Descreen is the function for reducing this moire effect. This setting is OFF by default.
Even if Descreen is set to ON, some moire effects may remain if Unsharp Mask is set to ON. In that case, set Unsharp Mask to OFF. Selecting Magazine(Color) in Select Source in Basic Mode tab has the same effect as setting Descreen to ON in Advanced Mode tab.
Reduce Dust and Scratches
Scanned photos may contain white dots caused by dust or scratches. Use this function to reduce such noise. This setting is None by default.
Dust and scratches will not be reduced.
Select this to reduce small dust particles and scratches. Large ones may remain.
It is recommended that you normally select this setting.
Select this to reduce small/large dust particles and scratches. Evidence of the reduction process may remain and may also remove delicate parts of the image.
This function may not be effective for some types of photos.
It is recommended that you select None when scanning printed materials.
Use this function to correct photos that have faded with time or have a colorcast. Colorcast is a phenomenon where a specific color affects the entire picture due to the weather or ambient strong colors. This setting is None by default.
Fading correction will not be applied.
Select this to correct a small amount of fading and colorcast.
It is recommended that you normally select this setting.
Select this to correct a large amount of fading and colorcast. This can affect the tone of the image.
You can set Fading Correction after preview.

Fading Correction may not be effective if the scan area is too small. You can set this setting when Recommended is selected on the Color Settings tab of the Preferences dialog box. When you click Multi-Crop, this setting turns to None and you cannot change it.
Use this function to reduce graininess (roughness) in photos taken with high-speed or sensitized film. This setting is None by default.
Graininess will not be reduced.
Select this when the photo is slightly grainy.
It is recommended that you normally select this setting.
Select this when the photo is very grainy. This can affect the gradation and sharpness of the image.
Grain Correction may not be effective if the scan area is too small.
Use this function to correct photos that have been shot against light. When you change the Backlight Correction setting, the result will be reflected in the preview image.
Backlight correction will not be applied.
Select this to correct slightly backlit photos. This will not affect the image contrast.
It is recommended that you normally select this setting.
Select this to correct strongly backlit photos. This can affect the image contrast.
You can set Backlight Correction after preview. You can set this setting when Recommended is selected on the Color Settings tab of the Preferences dialog box. Backlight Correction may not be effective if the scan area is too small. When you click Multi-Crop, you cannot change this setting.
Noise patterns may appear when Backlight Correction is applied. Applying Grain Correction and setting Unsharp Mask to OFF may reduce the noise patterns.
Use this function to correct shadows that appear between pages when scanning open booklets. When you set the Gutter Shadow Correction setting in the preveiw image, the result will be reflected. Preview the effects before scanning, as results vary depending on the type of document and how it is pressed. Unclear or blurred text/lines caused by curved pages are not corrected.
Gutter shadow will not be corrected.
Select this when the effect level is too strong with the medium setting.
It is recommended that you normally select this setting.

Select this when the effect level is too weak with the medium setting.
Do not place items that weigh 4.4 lbs (2.0 kg) or more on the Platen. Also, do not press on the document with a force exceeding 4.4 lbs (2.0 kg). If you press heavily, the scanner may not work correctly or you might break the glass. When you click Multi-Crop, this setting is not available. Click Reset then change the setting. Align the document with the edge of the Platen. If not, the shadow will not be corrected properly.

Shadows may not be corrected properly depending on the document. If the page background is not white, shadows may not be detected correctly or may not be detected at all. While scanning, press down on the spine with the same amount of pressure you used to preview the scan. If the binding part is not even, the shadow will not be corrected properly.


How to place the document depends on your model and the document to be scanned.
Cover the document with black cloth if white spots, streaks, or colored patterns appear in scan results due to ambient light entering between the document and the Platen. If the shadow is not corrected properly, adjust the cropping frame on the preview image.
High · Adjusting Cropping Frames

Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Color Adjustment Buttons

The Color Adjustment Buttons allow you to make fine corrections to the image brightness and color tones. You can adjust the image's overall brightness or contrast, and adjust its highlight and shadow values (histogram) or balance (tone curve).
The Color Adjustment Buttons are not available when you apply Multi-Crop or when you select Color Matching on the Color Settings tab of the Preferences dialog box.
Selectable settings depend on color mode settings. When you adjust the image via the Color Adjustment Buttons, the results will be reflected in the preview image.
Click a Color Adjustment Button to set the following items:
Adjust the vividness and color tone of the image. Use this function to brighten colors that have faded with time or due to colorcast. Colorcast is a phenomenon where a specific color affects the entire picture due to the weather or ambient strong colors.
Adjusting Saturation and Color Balance
Adjust the brightness and contrast of the image. If the image is too dark or too bright, or if the image quality is flat due to lack of contrast, you can adjust the levels of brightness and contrast.
Adjusting Brightness and Contrast
A histogram allows you to see the data concentration at each brightness level of an image. You can specify the darkest level (shadow) and brightest level (highlight) within an image, cut the levels and expand the middle of the tonal range of the image.

Adjust the brightness of an image by selecting the type of graph (tone curve) showing the balance of tone input and output. You can make fine adjustments to the brightness of a specific area.
Make a final check of color adjustments. The final synthesized tone curve and the histogram derived from the subsequent image processing will be displayed. There are no settings to make in this screen.

For a color image, select a color in Channel to check either Red, Green or Blue, or select Master to check three colors together.
If you place the cursor on the preview image, the portion will be enlarged and its RGB values (only K when Color Mode is Grayscale) before and after the adjustments will be displayed.
Set the boundary (threshold) at which black and white are divided. By adjusting the threshold level, you can sharpen text in a document or reduce show-through in newspapers.
You can name and save a set of tone curve and threshold settings created with the Color Adjustment Buttons. Select Add/Delete... from the pull-down menu. When Color Mode is set to anything but Black and White, the Add/Delete Tone Curve Settings dialog box opens. When Color Mode is Black and White, the Add/Delete Threshold Settings dialog box opens.

Enter Setting Name and click Add. The name appears in Tone Curve Settings List or Threshold Settings List.
Click Save to save.
You can load and apply the saved tone curve/threshold settings to a preview image. To load the settings, select the saved item from the pull-down menu.
To delete an item, select it in Tone Curve Settings List or Threshold Settings List and click Delete.

Save up to 20 items.
Reset all adjustments (saturation/color balance, brightness/contrast, histogram and tone curve).
Defaults

Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Auto Scan Mode Tab
This mode allows you to scan easily by simply placing documents on the Platen or ADF (Auto Document Feeder) and clicking a button.
In Auto Scan Mode, documents are automatically detected. You do not need to specify cropping frames or make image corrections.
Photos, Hagaki, business cards, magazines, newspapers, text documents and CD/DVD.
The following types of documents cannot be scanned correctly. In that case, specify the document type on the Basic Mode tab or the Advanced Mode tab and scan again. - Documents other than photos, Hagaki, business cards, magazines, newspapers, text documents and CD/DVD - Text documents smaller than 2L (5 inches x 7 inches) (127 mm x 178 mm), such as paperback pages with the spine cut off - Documents printed on thin white paper - Wide documents such as panoramic photos
Scanning in Basic Mode
Scanning in Advanced Mode Reflective CD/DVD labels may not be scanned properly. Place documents correctly according to the type of document to be scanned. Otherwise, documents may not be scanned correctly. See "Placing Documents" for details on how to place documents. Scanning takes longer than usual when scanning from the ADF (Auto Document Feeder) for the first time. Place documents of the same size when scanning two or more documents from the ADF (Auto Document Feeder).
Scan from the Basic Mode Tab or Advanced Mode Tab to reduce moire.
How to set documents
Placing Documents appears.
Supported Documents · View scanned images

Select this checkbox to display the thumbnails of scanned images in a different window.

Scanning starts.
When scanning starts, the progress will be displayed. Click Cancel to cancel the scan. When scanning is completed, a dialog box prompting you to select the next action may open. Follow the prompt to complete. For details, see Status of ScanGear dialog after scanning in "
Scan Tab" (Preferences dialog box).
This page appears.
Preferences...
The Preferences dialog box opens and you can make scan/preview settings.
Closes ScanGear (scanner driver).
Scanning in Auto Scan Mode

Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Preferences Dialog Box
Click Preferences... in the ScanGear (scanner driver) screen to open Preferences dialog box.
In the Preferences dialog box, you can make advanced settings to ScanGear (scanner driver) functions via the Scanner, Preview, Scan and Color Settings tabs.

Allows you to specify a folder to save images temporarily and a music file to play during or at the end of a scan.
Allows you to select what to do with Preview when ScanGear (scanner driver) is started and how to display cropping frames after previewing images.
Allows you to select what to do with ScanGear (scanner driver) after scanning images.
Allows you to select how to adjust color, enable/disable Auto Tone, and specify the monitor gamma value.

Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Scanner Tab
On the Scanner tab, you can specify the following settings.
Select this checkbox to reduce scanner sound by slowing down the scanner head when previewing or scanning documents. This checkbox is not selected by default.
Scanning takes longer than usual when you enable this function.
Select Folder Where Temporary Files are Saved
Specify a folder in which to save images temporarily. To change the folder, click Browse... to specify another one.
You can set the machine to play music during/at the end of a scan. Select the Play Music During Scanning or Play Sound When Scanning is Completed checkbox, then click Browse... and specify a sound file. You can specify the following files. MIDI file (*.mid, *.rmi, *.midi) Audio file (*.wav, *.aif, *.aiff) MP3 file (*.mp3)
When you set Execute at Every Scan to ON, the scanner will be calibrated every time before previewing and scanning, to reproduce correct color tones in scanned images.
Even when Execute at Every Scan is set to OFF, the scanner may be calibrated automatically in some cases (such as immediately after you turn the machine on). Calibration may take time depending on your computer.
Quiet Mode · Sound Settings · Calibration Settings

Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Preview Tab
On the Preview tab, you can specify the following settings.
These settings are not available when scanning from the ADF (Auto Document Feeder).

Preview at Start of ScanGear
Select what to do with Preview when ScanGear (scanner driver) is started. Display Saved Preview Image is selected by default.
ScanGear (scanner driver) will automatically start previewing at startup.
Display Saved Preview Image
The previously previewed image will be displayed. The Color Adjustment Button settings, the Toolbar settings, and the Advanced Mode tab settings are also saved.
No preview image will be displayed at startup.
Select None if you do not want to save the preview image.
Cropping Frame on Previewed Images
Select how to display cropping frames after previewing images. Execute Auto Cropping on Previewed Images is selected by default.
Execute Auto Cropping on Previewed Images
The cropping frame will automatically be displayed in the document size after previewing.
Display the Last Frame on Previewed Images
A cropping frame of the same size as the last used cropping frame will be displayed after previewing.
Automatically Execute Preview · None

No cropping frame will be displayed after previewing.
None

Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Scan Tab
On the Scan tab, you can specify the following settings.

Status of ScanGear dialog after scanning
Select what to do with ScanGear (scanner driver) after scanning images. Close ScanGear automatically is selected by default.
Select this to return to the original application when scanning is completed.
Do not close ScanGear automatically
Select this to return to the ScanGear (scanner driver) screen for another scan when scanning is completed.
Display the dialog to select next action
Select this to open a screen and select what to do when scanning is completed.

Even if Do not close ScanGear automatically or Display the dialog to select next action is set, some applications may not support it.
Close ScanGear automatically

Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Color Settings Tab
On the Color Settings tab, you can specify the following settings.

Select either of the following. Recommended is selected by default. This function is available when Color Mode is Color or Grayscale.
Select this to vividly reproduce the tone of a document on the screen. It is recommended that you normally select this setting.
Select this to automatically match the scanner, monitor and color printer colors, thus reducing time and trouble to manually match the monitor and printer colors. Color Adjustment Buttons will be disabled. This function is available when Color Mode is Color. - Source(Scanner): Select scanner profile. - Target: Select target profile. - Monitor: Select this to display preview image with optimum correction for monitor. - Defaults: Returns to the default Color Matching settings.
Select this to disable color correction provided by ScanGear (scanner driver).
Color Matching is available when ScanGear (scanner driver), monitor, color management- compliant application (such as Photoshop) and printer are set up correctly. Refer to the corresponding manual for the monitor, printer and application settings.
Always Execute the Auto Tone
Select this checkbox to always apply Auto Tone to scanned images. This checkbox is selected by default. This function is available when Color Mode is Color or Grayscale.

You cannot select this setting when None or Color Matching is selected on the Color Settings tab. The color tone may change from the source image due to the Auto Tone function. In that case, deselect the Always Execute the Auto Tone checkbox.
By setting the gamma value of a monitor, you can adjust the input data to the brightness characteristics of the monitor. Adjust the value if your monitor's gamma value does not match the default value set in ScanGear (scanner driver), and the colors of the original image are not accurately reflected in the monitor. Click Defaults to return to the default Monitor Gamma value (2.20).
Refer to the manual of your monitor to check its gamma value. If it is not written in the manual, contact the manufacturer.
Monitor Gamma

Advanced Guide > Scanning > Scanning with Other Application Software > Appendix: Useful Information on Scanning
Adjusting the cropping frame (scan area)
Selecting the best resolution
Learning about file formats
Learning about Color Matching
Matching the colors between the document and monitor
See Monitor Gamma in the following section.

Advanced Guide > Scanning > Scanning with Other Application Software > Appendix: Useful Information on Scanning > Adjusting Cropping Frames
You can specify the scan area by creating a cropping frame on the image displayed in the Preview area of the ScanGear (scanner driver) screen. When you click Scan, only the portion within the cropping frame will be scanned and passed to the application.
You can create multiple cropping frames. When you click Scan, all cropping frames will be scanned. (Scan is repeated for each cropping frame.)
You cannot create additional cropping frames when you used Multi-Crop in ScanGear's Advanced Mode tab.



(1) Focus Cropping Frame (rotating thick broken lines)
The settings in Basic Mode or Advanced Mode will be applied.
(2) Selected Cropping Frame (stationary thick broken lines)
The settings will be applied to the Focus Cropping Frame and Selected Cropping Frames simultaneously. You can select multiple cropping frames by clicking them while pressing the Ctrl key.
(3) Unselected Cropping Frame (stationary thin broken lines)
The settings will not be applied.
A cropping frame (Focus Cropping Frame) is displayed automatically around the preview image according to the document size. You can also create a cropping frame by dragging the mouse in the Preview area.
The cursor will change into
when it is positioned over a cropping frame. If you click and drag the mouse in the direction of the arrow, the cropping frame will expand or contract accordingly.
The cursor will change into
when it is positioned within a cropping frame. Click and drag the mouse to move the entire cropping frame.
You can rotate a cropping frame 90 degrees by clicking
(Switch Aspect Ratio) is not available when Output Size is Flexible.
(Switch Aspect Ratio). However,

In Advanced Mode, you can specify the cropping frame size by entering the values into
(Height) in Input Settings.
Cropping frames are set according to the document size (Auto Crop) by default. For details, see Cropping Frame on Previewed Images in " Preview Tab" (Preferences dialog box).
Click and drag the mouse in a space outside the existing cropping frame to create a new cropping frame in the Preview area. The new cropping frame will be the Focus Cropping Frame, and the old cropping frame will be the Unselected Cropping Frame.
You can create multiple cropping frames and apply different scan settings to each cropping frame.
You can also select multiple cropping frames by clicking them while pressing the Ctrl key.
If you select multiple cropping frames and change the settings on a tab at the right of ScanGear (scanner driver), the settings will be applied to all the selected cropping frames.
When you create a new cropping frame, it retains the settings of the latest cropping frame.
Create up to 10 cropping frames. Scanning takes longer than usual when multiple cropping frames are selected.
To delete a cropping frame, select it and click
(Remove Cropping Frame) on the Toolbar. Alternatively, press the Delete key.
When there are multiple cropping frames, all the selected cropping frames (Focus Cropping Frame and Selected Cropping Frames) are deleted simultaneously.
(Width) and

Advanced Guide > Scanning > Scanning with Other Application Software > Appendix: Useful Information on Scanning > Resolution
The data in the image you have scanned is a collection of dots carrying information about brightness and color. The density of these dots is called "resolution", and resolution will determine the amount of detail your image contains. The unit of resolution is dots per inch (dpi). Dpi is the number of dots per square inch (2.54 cm square).
The higher the resolution (value), the more detail in your image; the lower the resolution (value), the less detail.


In MP Navigator EX, you can specify the resolution with Scanning Resolution in the Scan Settings dialog box.
Images to be printed should be scanned at a resolution that corresponds to the resolution of the printer.
For example, if you want to print using a 600 dpi black and white printer, you should set the resolution to 600 dpi.
With a color printer, specifying the resolution at half the resolution of the printer should be fine. For example, if you want to print scanned paper/photos using a 600 dpi color printer, you should set the resolution to 300 dpi. However, with a high-resolution printer, printing takes longer than usual if you set the resolution to half the resolution of the printer.
If you print a document at twice the size both vertically and horizontally, the resolution of the document will be reduced by half. If the resolution of the original document is 300 dpi, the resolution of the enlarged document will be 150 dpi. If you print the document with a 600 dpi color printer, the lack of detail in the image may be obvious. In that case, if you scan at the Scanning Resolution of 600 dpi, the resolution will be 300 dpi even if you double the size of document and you can print the document with sufficient quality. Conversely, if you print a document at half scale, it should be sufficient to scan at half the resolution.
When Printing Color Photos at Twice the Size





Print at twice the size Scanning resolution/actual scanning resolution: 600 dpi
In ScanGear (scanner driver), you can specify the resolution with Output Resolution in Output Settings on the Advanced Mode tab.

The scanning resolution is automatically set so that the value set in Output Resolution will be the resolution of the scanned image. If you set Output Resolution to 300 dpi and scan at twice the size, the document will be automatically scanned at 600 dpi, and the resolution of the scanned image will be 300 dpi. You can print the document with sufficient quality using a 600 dpi color printer.
When Printing L Size (8.9 cm x 12.7 cm) Photos at Twice the Size
Scan at twice the size Actual scanning resolution: 600 dpi
Set the resolution according to the use of the scanned image.
When Output Size is set to Flexible in ScanGear's Advanced Mode tab (Select Source is Platen and the scale is 100%):
Document Use Color Mode Output Resolution
Color photo Copying (Printing)
Creating a postcard Color 300 dpi
Saving to a computer Color 75 dpi - 300 dpi
Using on a website or attaching to e-mail
Color 75 dpi - 150 dpi
Black and white photo
Saving to a computer Grayscale 75 dpi - 300 dpi
Using on a website or attaching to e-mail
Grayscale 75 dpi - 300 dpi
Text document Copying Color, Grayscale or Black and White
Attaching to e-mail Color, Grayscale or Black and White
If you double the resolution, the file size quadruples. If the file is too large, the processing speed will slow down significantly, and you will experience inconvenience such as lack of memory. Set the minimum required resolution according to the use of the image.
Although you can change Output Resolution in ScanGear (scanner driver), it is recommended that you scan at the default value.
Color 300 dpi · 300 dpi · 300 dpi

Advanced Guide > Scanning > Scanning with Other Application Software > Appendix: Useful Information on Scanning > File Formats
You can select a file format when saving scanned images. You should specify the most suitable format according to how you want to use the image on which application.
Available file formats vary by application and computer (Windows or Macintosh).
See below for the characteristics of each image file format.
A standard file format for Windows.
BMP is often selected for images that are used only on Windows.
A file format often used on websites and for digital camera images.
JPEG features high compression rates. JPEG images slightly degrade every time they are saved, and cannot be returned to their original state.
JPEG is not available for black and white images.
A file format supported by many digital cameras.
It adds information such as the date of image capture, camera model, shutter speed, shooting mode and comments to JPEG files.
The file format version must be Exif 2.2 or later in order to print on a Direct Print compatible printer.
A file format featuring a relatively high compatibility between various computers and applications. (Some TIFF files are incompatible.) TIFF is suitable for editing saved images.
MP Navigator EX supports the following TIFF file formats. - Uncompressed, black and white binary - Uncompressed, RGB (8 bits per channel) - Uncompressed, YCC (8 bits per component) - Grayscale
A file format developed by Adobe Systems. It can be used on various computers and operating systems. Therefore, PDF files can be exchanged between people who use different operating systems, fonts, etc. regardless of the differences.
Only PDF files created with MP Navigator EX are supported. PDF files created or edited in other applications are not supported.

Advanced Guide > Scanning > Scanning with Other Application Software > Appendix: Useful Information on Scanning > Color Matching
Color Matching adjusts devices as shown below to match the colors of an image displayed on a monitor or a printed image with the colors of the original document.
ScanGear (scanner driver) converts the image's color space from the scanner's color space to sRGB.
When displaying on a monitor, the image's color space is converted from sRGB to the monitor's color space based on the operating system's monitor settings and the application's working space settings.
When printing, the image's color space is converted from sRGB to the printer's color space based on the application's print settings and the printer driver's settings.

Advanced Guide > Scanning > Other Scanning Methods
Scanning with WIA Driver
Scanning Using the Control Panel (Windows XP Only)

Advanced Guide > Scanning > Other Scanning Methods > Scanning with WIA Driver
You can scan an image from a WIA-compliant application and use the image in that application.
The procedure varies depending on the application. The following procedures are examples only.
For details, refer to the application's manual.
In Windows 2000, you cannot scan using the WIA driver. Some applications do not support continuous scanning from the ADF (Auto Document Feeder). For details, refer to the application's manual.
The following is an example of scanning using Windows Photo Gallery.
The scan setting screen appears.

The currently set product name is displayed. To change the scanner, click Change... and select the product you want to use.
Select Photo (Default) or Documents according to the document to be scanned. To save a new Profile, select Add profile You can specify the details in the Add New Profile dialog box.
Select a scanner type. To scan from the Platen, select Flatbed. To scan from the ADF (Auto Document Feeder), select Feeder (Scan one side).
Select the paper size. Paper size can be specified only when Source is Feeder (Scan one side).
Select how to scan the document.

Select a file format from JPEG, BMP, PNG and TIFF.
Enter the resolution. Specify a value between 50 dpi and 600 dpi. 300 dpi is set by default.
Move the slider to adjust the brightness. Move it to the left to darken and right to brighten the image. You can also enter a value (-100 to 100).
Move the slider to adjust the contrast. Moving it to the left will decrease the contrast of the image, thus softening the image. Moving it to the right will increase the contrast of the image, thus sharpening the image. You can also enter a value (-100 to 100).
Preview or scan images as separate files
Select this checkbox to preview or scan multiple images as separate files.
See how to scan a picture
Click to open Windows Help and Support.
The preview image appears on the right.
When scanning is completed, the scanned image appears in the application.
The following is an example of scanning using Paint.
To scan from the Platen, select Flatbed for Paper source. To scan from the ADF (Auto Document Feeder), select Document Feeder.

To scan with the values previously set in Adjust the quality of the scanned picture, select Custom Settings. Selecting Document Feeder for Paper source enables you to select Page size.


Move the slider to adjust the brightness. Move it to the left to darken and right to brighten the image. You can also enter a value (-127 to 127).
Move the slider to adjust the contrast. Moving it to the left will decrease the contrast of the image, thus softening the image. Moving it to the right will increase the contrast of the image, thus sharpening the image. You can also enter a value (-127 to 127).
Enter the resolution. Specify a value between 50 dpi and 600 dpi.
Select the type of scan you want for your document.
Click to restore the original settings.
When scanning is completed, the scanned image appears in the application.

Page 567 of 817 pages Scanning Using the Control Panel (Windows XP Only)
Advanced Guide > Scanning > Other Scanning Methods > Scanning Using the Control Panel (Windows XP Only)
You can scan images via the Control Panel of Windows XP using the WIA driver.
Windows Image Acquisition (WIA) is a driver model implemented in Windows XP. It allows you to scan documents without using an application. Scan documents from a TWAIN-compliant application to specify advanced settings for scanning.
The Scanner and Camera Wizard dialog box opens.
To scan from the Platen, select Flatbed for Paper source. To scan from the ADF (Auto Document Feeder), select Document Feeder.

To scan with the values previously set in Custom Settings, select Custom. Selecting Document Feeder for Paper source enables you to select Page size.

Move the slider to adjust the brightness. Move it to the left to darken and right to brighten the image. You can also enter a value (-127 to 127).
Brightness

Page 568 of 817 pages Scanning Using the Control Panel (Windows XP Only)
Move the slider to adjust the contrast. Moving it to the left will decrease the contrast of the image, thus softening the image. Moving it to the right will increase the contrast of the image, thus sharpening the image. You can also enter a value (-127 to 127).
Enter the resolution. Specify a value between 50 dpi and 600 dpi.
Select the type of scan you want for your document.
Click to restore the original settings.
The preview image appears on the right. Drag
to specify the scan area.

Advanced Guide > Faxing
Sending/Receiving Faxes Using the Operation Panel of the Machine
Sending Faxes from a Computer

Page 570 of 817 pages Sending/Receiving Faxes Using the Operation Panel of the Machine
Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine
Sending a Fax after Speaking on Telephone
Registering Recipients for Speed Dialing
Sending a Fax Using the Speed Dialing Feature
Searching a Registered Dial Code Number by Name (Directory Dialing)
Sending the Same Document to Several Recipients (Sequential Broadcasting)
Resending Faxes (Redialing a Busy Number)
Using the Useful Transmission Functions
Using the Information Services
Transmission/Reception of Faxes Using ECM
Preventing Mistransmission of Faxes
Changing the Print Settings
Setting the Number of Rings for Fax Calls
Using the Useful Reception Functions
Using the Caller ID Service to Reject Calls
Document Stored in Memory
Summary of Reports and Lists

Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Sending Faxes
For the preparations required to send faxes, or the basic procedure for sending faxes using the Numeric buttons, refer to Sending Faxes.

Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Sending a Fax after Speaking on Telephone
If you want to speak to the recipient before sending a fax, or if the recipient does not have a fax machine that can receive faxes automatically, send a fax manually after speaking to the recipient on the telephone.
With manual transmission, you cannot use the Platen Glass to load documents. You need to connect a telephone to the machine. Refer to your setup manual for instructions on how to connect the telephone to the machine.
If you hear a high-pitched signal instead of the recipient's voice, go to step 5.
Color transmission is available only when the recipient's fax machine supports color faxing.
To cancel a fax transmission, press the Stop button. To cancel a fax transmission while it is in progress, press the Stop button, then follow the instructions on the LCD. If documents remain in the ADF after the Stop button is pressed while scanning is in progress, Close the feeder cover [OK] -> Eject the document is displayed on the LCD. Press the OK button and follow the instructions on the LCD to automatically feed out the remaining documents.

Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Registering Recipients for Speed Dialing
Speed dialing allows you to dial fax/telephone numbers by simply pressing a few buttons.
The following speed dialing methods are available:
Register a fax/telephone number for coded speed dialing. To dial the number, press the Coded Dial button, then enter the two-digit code assigned to that number, or use the
button to select it. You can register up to 20 (00 to 19) destinations.
Registering Coded Speed Dial Numbers
Register two or more registered coded speed dial numbers for group dialing. You can send the same document to all members in that group.
Registering Group Dial Numbers
To change information registered for coded speed dialing or group dialing, see Changing Registered Information. To delete information registered for coded speed dialing or group dialing, see Deleting Registered Information. To print a list of the fax/telephone numbers registered, see Printing a List of the Registered Destinations.

Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Registering Recipients for Speed Dialing > Registering Coded Speed Dial Numbers
Before you can use the coded speed dialing feature, you need to register the recipients' numbers.
The Fax settings screen is displayed.
button to select TEL no. registration, then press the OK button.

button to select Coded speed dial, then press the OK button.

button to select an unoccupied speed dial code (00 to 19), or after pressing the Coded Dial button, use the Numeric buttons to enter it, then press the OK button.

button to select Telephone number, then press the OK button.

For details on how to enter or delete characters or numbers, refer to Specifying the Basic Settings for the Machine. Press the Redial/Pause button to enter a pause. Press the Tone button to enter a tone.
To register another recipient's name and number to a coded speed dial code, repeat steps 4 to 8. For a list of the recipients you have registered, print the coded speed dial code list. For details, see Printing a List of the Registered Destinations .

Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Registering Recipients for Speed Dialing > Registering Group Dial Numbers
To send the same document to several recipients in one operation, select the numbers you registered to the coded speed dial codes and register them to a group dial.
The Fax settings screen is displayed.
button to select TEL no. registration, then press the OK button.
button to select Group dial, then press the OK button.

button to select an unoccupied speed dial code (00 to 19), or after pressing the Coded Dial button, use the Numeric buttons to enter it, then press the OK button.
You can register a group under an unoccupied coded speed dial code.
button to select a coded speed dial code to register to the group dial, then press the OK button.
If Enter first letter is displayed on the LCD, press one of the Numeric buttons, use the
button to select a coded speed dial code to register to the group dial, then press the OK button.
To continue registering coded speed dial codes to the group, repeat the procedure above. You can only enter numbers that have already been registered to coded speed dial codes (i.e. you cannot enter the fax/telephone numbers with the Numeric buttons). To review the codes you have registered, use the
button.
To delete the code you have registered, use the
button to select the coded speed dial code, then press the Tone button.
For details on how to enter or delete characters or numbers, refer to Specifying the Basic Settings for the Machine. Groups will appear on the Group dial code list by the names you have entered in this step.
To register another group, repeat steps 4 to 7. For a list of the entries you have made, print the Group dial code list. For details, see Printing a List of the Registered Destinations .

Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Registering Recipients for Speed Dialing > Changing Registered Information
To change information registered for speed dialing, follow the procedure below.
The Fax settings screen is displayed.
button to select TEL no. registration, then press the OK button.
button to select Coded speed dial or Group dial to change, then press the OK button.
button to select a coded speed dial code to change, or after pressing the Coded Dial button, use the Numeric buttons to enter it, then press the OK button.
button to delete the registered fax/telephone number.
code:
button to select a coded speed dial code that you have registered to a group dial to change, or after pressing the Coded Dial button, use the Numeric buttons to enter it, then press the OK button.
button to select Edit, then press the OK button.
If Enter first letter is displayed on the LCD, press one of the Numeric buttons.
button to select the coded speed dial code you want to add to a group, then press the OK button.
Repeat the procedure above to add other fax/telephone numbers registered to coded speed dial codes to the same group. To delete a coded speed dial code registered to a group dial code, use the
button to select the coded speed dial code to delete, then press the Tone button after step 2.

Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Registering Recipients for Speed Dialing > Deleting Registered Information
To delete information registered for speed dialing, follow the procedure below.
The Fax settings screen is displayed.
button to select TEL no. registration, then press the OK button.
button to select Coded speed dial or Group dial to delete, then press the OK button.
button to select a coded speed dial code to delete, or after pressing the Coded Dial button, use the Numeric buttons to enter it, then press the OK button.
button to delete the registered fax/telephone number.
The name will automatically be deleted when you delete the number.
To delete a coded speed dial code registered to a group dial code:
button to select a coded speed dial code that you have registered to a group dial code to delete, or after pressing the Coded Dial button, use the Numeric buttons to enter it, then press the OK button.
button to select Delete, then press the OK button.
button to select Yes, then press the OK button.

Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Registering Recipients for Speed Dialing > Printing a List of the Registered Destinations
You can print a list of the recipients registered for speed dialing and can keep it near the machine to refer to when dialing.
Refer to Loading Paper / Originals.
The Fax settings screen is displayed.
button to select Print reports/lists, then press the OK button.
button to select TEL number list, then press the OK button.
button to select Coded speed dial or Group dial, then press the OK button.
button to select whether to print the list in alphabetical order of the registered names, or in numerical order of the coded speed dial codes.
Yes: Prints the list with the destination names in alphabetical order.
No: Prints the list with the registered entries in numerical order.
Press the OK button to print the list.
Use the

Page 579 of 817 pages Sending a Fax Using the Speed Dialing Feature
Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Sending a Fax Using the Speed Dialing Feature
Registering fax or telephone numbers for speed dialing enables you to send faxes easily.
For the preparations required to send faxes, or the basic procedure for sending faxes using the Numeric buttons, refer to Sending Faxes.
After pressing the Coded Dial button, use the Numeric buttons or the
button to enter the two-digit code assigned to the number you want to dial, then press the OK button.
After pressing the Coded Dial button, use the Numeric buttons or the
button to enter the two-digit code assigned to the group you want to dial, then press the OK button.
If you used directory dialing to send a fax on the previous occasion, the directory dialing screen is displayed when you press the Coded Dial button. For details, see Searching a Registered Dial Code Number by Name (Directory Dialing) .
Color transmission is available only when the recipient's fax machine supports color faxing.
To cancel a fax transmission, press the Stop button. To cancel a fax transmission while it is in progress, press the Stop button, then follow the instructions on the LCD. If documents remain in the ADF after the Stop button is pressed while scanning is in progress, Close the feeder cover [OK] -> Eject the document is displayed on the LCD. Press the OK button and follow the instructions on the LCD to automatically feed out the remaining documents. In case the machine was not able to send a fax, such as when the recipient's line was busy, it has the function to automatically redial the number after a specified interval. Automatic redialing is enabled by default. For details, see Automatic Redialing. To cancel automatic redialing, wait until the machine starts redialing, then press the Stop button.

Page 580 of 817 pages Searching a Registered Dial Code Number by Name (Directory Dialing)
Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Searching a Registered Dial Code Number by Name (Directory Dialing)
You can search the fax/telephone numbers registered to the coded speed dial codes in alphabetical order.
For the preparations required to send faxes, or the basic procedure for sending faxes using the Numeric buttons, refer to Sending Faxes.
The coded speed dial code screen is displayed.
button to display the directory dialing screen.

The directory dialing screen alternates with the coded speed dial code screen each time you press the
button.
For details on how to enter or delete characters or numbers, refer to Specifying the Basic Settings for the Machine.
The recipients' names are sorted in alphabetical order.
You can enter the following characters using the Numeric buttons. A, D, G, J, M, P, T, W If the entered character does not match the first character of any of the recipients' name registered to the coded speed dial codes, names beginning with the character closest to that entered are displayed.
button to select the recipient's name, then press the OK button.
Color transmission is available only when the recipient's fax machine supports color faxing.

Page 581 of 817 pages Sending the Same Document to Several Recipients (Sequential Broadcastin...
Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Sending the Same Document to Several Recipients (Sequential Broadcasting)
This machine allows you to send the same document to a maximum of 21 recipients in one operation. You can dial the recipients' numbers using either of the following dialing methods.
Up to 20 destinations
You can enter the destinations in any order, but be sure to press the OK button after your entry with the Numeric buttons.
If you frequently send documents to the same group of recipients, you can group these numbers for group dialing. This will allow you to send documents to all the recipients in the group by simply pressing one or a few buttons. For details, see Registering Group Dial Numbers. For the preparations required to send faxes, or the basic procedure for sending faxes using the Numeric buttons, refer to Sending Faxes.
After pressing the Coded Dial button, use the Numeric buttons or the
button to enter the two-digit code assigned to the number you want to dial, then press the OK button.
If the directory dialing screen is displayed, see Searching a Registered Dial Code Number by Name (Directory Dialing) .
Use the Numeric buttons to enter the recipient's number, then press the OK button.
If Fax number re-entry is set to ON, see Sending Faxes after Dialing Twice (Fax Number Re- entry).
Press the Redial/Pause button, use the
button to select the number you want to dial, then press the OK button.
To review the numbers you have entered, use the
button. Pressing the Back button allows you to delete the last recipient's number.
Color transmission is available only when the recipient's fax machine supports color faxing.
One destination · Manual Redialing

Page 582 of 817 pages Sending the Same Document to Several Recipients (Sequential Broadcastin...
To cancel sequential broadcasting, press the Stop button. To cancel a fax transmission while it is in progress, press the Stop button, then follow the instructions on the LCD. If documents remain in the ADF after the Stop button is pressed while scanning is in progress, Close the feeder cover [OK] -> Eject the document is displayed on the LCD. Press the OK button and follow the instructions on the LCD to automatically feed out the remaining documents. When you press the Stop button, fax transmission to all the recipients will be canceled. You cannot cancel a fax transmission to only one recipient.

Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Resending Faxes (Redialing a Busy Number)
There are two methods of redialing: Automatic redialing and Manual redialing.
If you send a document and the recipient's line is busy, the machine will redial the number after a specified interval. Automatic redialing is enabled by default.
You can customize the following automatic redialing settings:
The number of times the machine redials (1 to 10 times)
The time interval between redials (1 to 99 minutes)
For details on the automatic redialing settings, see Auto redial.
The range of values you can set for the automatic redialing settings varies depending on the country or region of purchase. To cancel automatic redialing, wait until the machine starts redialing, then press the Stop button. To cancel automatic redialing, delete the unsent document from the machine's memory while the machine is on-standby for a redial operation. For details, see Deleting a Document in Memory.
Follow the procedure below for manual redialing.
button to select the recipient's number to redial, then press the OK button.
Color transmission is available only when the recipient's fax machine supports color faxing.
For manual redialing, the machine memorizes up to 10 recent recipients dialed using the Numeric buttons. Note that the machine does not memorize any recipients dialed by coded speed dialing. To cancel manual redialing, press the Stop button.
Automatic Redialing · Manual Redialing

Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Using the Useful Transmission Functions
Using the Information Services
Transmission/Reception of Faxes Using ECM
Preventing Mistransmission of Faxes
For sending faxes from your computer, refer to Sending Faxes from a Computer .

Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Using the Information Services
You can use various information services such as provided by banks, and make airline reservations or hotel reservations. Since these services require tone dialing to use their services, you need to temporarily switch to tone dialing if your machine is connected to a rotary pulse line.
Using the Touch Tone Line
Using the Rotary Pulse Line
You may need to contract with the service providers for some information services. For details, contact the service providers.
To use the information services, you need to dial with the telephone connected to the machine.
When you dial the number of the information service using the telephone connected to the machine, you cannot use the machine to switch to tone dialing. For instructions on how to switch to tone dialing, refer to your telephone's instruction manual.

Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Transmission/ Reception of Faxes Using ECM
This machine is set to send/receive faxes in Error Correction Mode (ECM). If the recipient's fax machine is compatible with ECM, ECM automatically corrects errors and resends the fax.
If the sender's or recipient's fax machine is not compatible with ECM, the fax will be sent/received in the standard mode. You can disable ECM transmission/reception. For details, see ECM TX or ECM RX. Transmission may take longer when ECM is enabled.

Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Preventing Mistransmission of Faxes
This machine has two functions for preventing mistransmission of faxes.
Sending Faxes after Dialing Twice (Fax Number Re-entry)
information
Sending Faxes after Checking Information (Checking the Recipient's Information)
This function requires you to re-enter the fax/telephone number after entering the number using the Numeric buttons, so that the machine prevents you from misdialing.
The Fax settings screen is displayed.
button to select Transmission settings, then press the OK button.

button to select Fax number re-entry, then press the OK button.

button to select ON, then press the OK button.
Follow the procedure below to send a fax with this function.
Re-enter the number. is displayed on the LCD.
If the number is not identical with the number entered first, go back to step 1.
Color transmission is available only when the recipient's fax machine supports color faxing.
Before sending a fax, the machine checks whether the recipient's fax machine information matches the dialed number.
The Fax settings screen is displayed.

2. Use the
button to select Transmission settings, then press the OK button.
button to select Check RX fax info, then press the OK button.

button to select ON, then press the OK button.
Transmission may take longer when this function is enabled. Transmission will be canceled if the machine fails to receive the recipient's fax information or if the received information does not match the fax number. This function is not available when you send a fax manually. For details, see Sending a Fax after Speaking on Telephone .

Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Receiving Faxes
Refer to Receiving Faxes for information on receiving faxes or the receive mode settings.

Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Changing the Print Settings
This machine prints received faxes to paper loaded on the Rear Tray. You can use the Operation Panel to change the paper settings for printing faxes. Make sure that the settings are appropriate for the loaded paper.
If paper other than A4, Letter-, or Legal-sized paper is loaded, the received faxes are stored in memory and Change the paper A4/LTR/Legal Plain paper is displayed on the LCD. In this case, replace the loaded paper with A4, Letter-, or Legal-sized* paper, then press the OK button. You can also press the Stop button to close the message and print the stored documents in memory later. For details, see Printing a Document in Memory . * Legal may not be available depending on the country or region of purchase.
If the sender sends a document that is larger than Letter-size or Legal-size, such as 11" x17", the sender's machine may send the fax automatically reduced in size or divided, or send only a part of the original.
button to select A4, 8.5"x11"(LTR), or Legal (or 8.5"x14"), then press the OK button.
button to select Plain paper, then press the OK button.
The LCD returns to the FAX standby screen.

Page 591 of 817 pages Setting the Number of Rings for Fax Calls
Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Setting the Number of Rings for Fax Calls
When Fax priority mode or Fax only mode is selected as the receive mode, you can specify how many times the external device rings for fax calls from Ring count.
DRPD*1 or Network switch*2 is also available. For details, refer to Setting the Receive Mode.
*1 This setting is available only in the US and Canada.
*2 This setting may not be available depending on the country or region of purchase.
Ring count

Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Using the Useful Reception Functions
Using the Caller ID Service to Reject Calls
Memory Reception · Remote Reception · Rejecting Fax Reception

Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Memory Reception
If the machine receives a fax under one of the following conditions, it will not be able to print the received fax and will store it in its memory. The In Use/Memory lamp is lit and Received in memory is displayed on the LCD. When the problem is resolved as described, the fax stored in memory is printed automatically.
Replace the FINE Cartridge.
You can set the machine to forcibly print a received fax even if the ink has run out. However, part or all of the fax may not be printed since the ink has run out. Also, the contents of the fax will not be stored in memory. If the ink has already run out, we recommend that OFF be selected for Auto print in User settings to store the received fax in memory and print the fax manually after replacing the FINE Cartridge. For details, see Document Stored in Memory .
Load the paper and press the OK button.
A different size of paper from that specified by Page size is loaded:
Load the same size of paper as that specified by Page size, then press the OK button.
Page size is set to other than A4, 8.5"x11"(LTR), or Legal (or 8.5"x14"):
Set Page size to A4, 8.5"x11"(LTR), or Legal (or 8.5"x14").
Set Media type to Plain paper.
Press the FAX button.
To print the received faxes automatically, select ON for Auto print in User settings. For details, see Auto print. When OFF is selected for Auto print in User settings, print the faxes stored in memory from the Memory reference screen. For details, see Printing a Document in Memory . The machine can store up to approximately 50 pages (approximately 20 documents)* of faxes in memory. * When using ITU-T No.1 chart (Standard mode) If the memory becomes full, the machine cannot receive any more faxes. Print or delete the originals stored in memory, and have the sender resend the faxes. For details, see Document Stored in Memory.
Routine Maintenance

Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Remote Reception
If the machine is located away from the telephone, pick up the handset of the telephone connected to the machine and dial 25 (the remote reception ID) to receive faxes (remote reception).
If you use a rotary pulse line, temporarily switch your telephone to tone
dialing. For details on how to switch to tone dialing, refer to your
telephone's instruction manual.
carry out remote control operations, the security code for this function
may be the same as the remote reception ID. In this case, change the
remote reception ID in Remote RX ID in Remote RX. Remote reception can be disabled.
Remote RX

Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Rejecting Fax Reception
You can set the machine to reject faxes with no sender information or those from specific senders. Select one of the following conditions to reject faxes.
Faxes with no caller identification.
Faxes from senders not registered to the coded speed dial codes.
Faxes from senders registered in the machine as rejected numbers.
The Fax settings screen is displayed.
button to select Reception settings, then press the OK button.

button to select Fax reception reject, then press the OK button.

button to select ON, then press the OK button.
button to select the fax rejection condition, then press the OK button.
You can select one of the three conditions below.
No sender info.* Rejects faxes with no caller identification.
Coded dial unset* Rejects faxes from the senders not registered to coded speed dial codes.
* This setting may not be available depending on the country or region of purchase.
Rejected numbers Rejects faxes from the senders registered in the machine as rejected numbers.
If you select Rejected numbers, follow the procedure below to register a fax/telephone number to reject.
The screen for registering a rejected number is displayed.

button to select the dial code to register, then press the OK button.

Register rejected no. Data entry OK is displayed on the LCD, then the LCD returns to the screen for registering a rejected number.
You can register up to 10 rejected numbers.
When the machine rejects reception, Reception rejected is displayed on the LCD. You can print the list of rejected numbers. For details, see Summary of Reports and Lists. Faxes with no caller identification are also rejected when Coded dial unset or Rejected numbers is selected.
To change/delete a rejected number, follow the procedure below.
The Fax settings screen is displayed.
button to select TEL no. registration, then press the OK button.
button to select Rejected numbers, then press the OK button.

button to select the fax/telephone number to change/delete, then press the OK button.
button to delete the number.
Use the Numeric buttons to enter the new number, then press the OK button.
Press the OK button.

Page 597 of 817 pages Using the Caller ID Service to Reject Calls
Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Using the Caller ID Service to Reject Calls
If you subscribe to the Caller ID service, the machine detects the sender's Caller ID. If the sender's ID does not match the conditions specified in this setting, the machine rejects the phone call or fax reception from the sender.
The Fax settings screen is displayed.
button to select Reception settings, then press the OK button.
button to select Caller rejection, then press the OK button.

button to select Subscribed, then press the OK button.
You can now perform settings for Caller rejection.
button to select the phone call or fax rejection condition, then press the OK button.
Set the conditions below.
Anonymous number Selects whether to reject a phone call or fax reception from a sender with no caller identification.
Out of area Selects whether to reject a phone call or fax reception out of the subscribed service area.
Rejected numbers Selects whether to reject a phone call or fax reception from the numbers registered to Rejected numbers in Fax reception reject. For details, see Rejecting Fax Reception. Reject: Rejects the phone call or fax reception matching the condition specified by this setting. If you select Reject for Rejected numbers, Register rejected no.? is displayed on the LCD. Select Yes to register a fax/telephone number to reject. For details, see Rejecting Fax Reception. Accept: Allows the phone call or fax reception matching the condition specified by this setting.
This setting may not be supported depending on the country or region of purchase. Contact your telephone company to confirm whether it provides this service.

Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Document Stored in Memory
In the following cases, the machine is not able to print the received fax and will automatically store the fax in its memory.
Ink has run out.
Paper has run out.
A different size of paper from that specified by Page size is loaded.
Page size is set to other than A4, 8.5"x11"(LTR), or Legal (or 8.5"x14").
Media type is set to other than Plain paper.
OFF is selected for Auto print in User settings.
You pressed the Stop button to cancel printing of a received fax.
If you disconnect the power cord, all the documents stored in memory are deleted. Send or print necessary documents before disconnecting the power cord.
When confirming, printing, or deleting a document stored in memory, you specify it by its transaction number. If you do not know the transaction number for your target document, print the list of documents first.
Printing a Document in Memory
Deleting a Document in Memory

Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Document Stored in Memory > Printing a Document in Memory
If the machine was not able to send a fax or print a received fax, it stores the unsent or unprinted fax in its memory. If an error occurred during a fax transmission, the document is not stored in memory. You can print a list of stored documents (the memory list) or print a specified document.
Printing a Memory List or Specified Document in Memory
Printing All the Documents in Memory
The memory list shows the transaction number of the unsent or unprinted fax (TX/RX NO.), transaction mode, recipient's number, and the date and time of the transaction.
Refer to Loading Paper / Originals.
The Fax settings screen is displayed.
button to select Memory reference, then press the OK button.
button to select Print memory list, then press the OK button.
The memory list stored in memory is printed.
button to select Print specified doc., then press the OK button.
button to select the transaction number (TX /RX no.) of the document you want to print, then press the OK button.
A transaction number from 0001 to 4999 indicates a document being sent. A transaction number from 5001 to 9999 indicates a document being received. Each mark before the transaction number indicates the following: No mark: Indicates a black and white document.
: Indicates a color document.
: Indicates the machine is receiving/printing a black and white document. &: Indicates the machine is receiving/printing a color document. While the transaction number is displayed, pressing the
button or the Tone button shows the transaction time or fax/telephone number on the LCD. Each time you press the
button or the Tone button, the information on the LCD changes.
button to select Yes, then press the OK button.
If you select Yes, only the first page of the document will be printed. If you select No, all the pages of the document stored in memory will be printed. To print other documents, repeat the procedure from steps 2 to 3.
If you select No to print all the pages of the document, and all the pages in
Use the

memory have been printed, OK to delete? is displayed on the LCD. If you select Yes, printed pages in memory are deleted. If there are no documents stored in memory, No documents in memory is displayed, and the machine returns to the previous screen.
Refer to Loading Paper / Originals.
The Fax settings screen is displayed.
button to select Memory reference, then press the OK button.
button to select Print all RX docs, then press the OK button.
button to select Yes, then press the OK button.
OK to delete? is displayed on the LCD each time a document is printed. If you select Yes, the document is deleted from memory. If there are no documents stored in memory, No documents in memory is displayed, and the machine returns to the previous screen.

Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Document Stored in Memory > Deleting a Document in Memory
Deleting a Specified Document in Memory
Deleting All the Documents in Memory
The Fax settings screen is displayed.
button to select Memory reference, then press the OK button.
button to select Delete specified doc., then press the OK button.

button to select the transaction number (TX/RX no.) of the document you want to delete, then press the OK button.

A transaction number from 0001 to 4999 indicates a document being sent. A transaction number from 5001 to 9999 indicates a document being received. Each mark before the transaction number indicates the following: No mark: Indicates a black and white document.
: Indicates a color document.
: Indicates the machine is receiving/printing a black and white document. &: Indicates the machine is receiving/printing a color document. While the transaction number is displayed, pressing the
button or the Tone button shows the transaction time or fax/telephone number on the LCD. Each time you press the
button or the Tone button, the information on the LCD changes.
button to select Yes, then press the OK button.
To delete other documents, repeat the procedure from steps 4 to 5.
The Fax settings screen is displayed.
button to select Memory reference, then press the OK button.
button to select Delete all documents, then press the OK button.
button to select Yes, then press the OK button.

This function is not available while the machine is receiving a fax.

Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Summary of Reports and Lists
The table below shows the reports and lists that can be printed from the machine. Refer to the pages indicated for more details.
Report or List Description
Activity report Shows recent fax transactions performed by the machine. You can set the machine to automatically print the report after every 20 transactions. You can also print the report manually.
Lists the numbers and names registered for coded speed dials and group dials.
Registering Recipients for Speed Dialing
User's data list Lists the current settings of the machine and the registered sender information.
Memory list Lists the documents currently stored in the machine's memory.
Document Stored in Memory
Rejected number list Lists the rejected numbers.
Caller history list Lists the caller history (Available when Caller ID service is subscribed).
Confirms whether a fax transmission has been completed successfully. If this setting is enabled, this report is printed after each fax transmission.
RX (Reception) report Confirms whether a fax reception has been completed successfully. If this
setting is enabled, this report is printed after each fax reception.
MULTI TX (Transmission) report
Printed after sequential broadcasting of a document.
When Auto print in User settings is set to OFF, the following reports are not printed automatically. Activity report TX (Transmission) report RX (Reception) report MULTI TX (Transmission) report
Prints the history of sent and received faxes. The machine is factory-set to print an Activity report after every 20 transactions. You can also disable automatic printing of this report, or print it manually.
For details on the Activity report settings, see Activity report.
Refer to Loading Paper / Originals.
The Fax settings screen is displayed.
button to select Print reports/lists, then press the OK button.


button to select Activity report, then press the OK button.

The Activity report is printed.
The User's data list enables you to confirm the current settings of your machine as well as the registered sender information.
Specifying the Basic Settings for the Machine
Refer to Loading Paper / Originals.
The Fax settings screen is displayed.
button to select Print reports/lists, then press the OK button.
button to select User's data list, then press the OK button.

The User's data list is printed.
Printing the Rejected number list
Refer to Loading Paper / Originals.
The Fax settings screen is displayed.
button to select Print reports/lists, then press the OK button.
button to select Rejected number list, then press the OK button.

The Rejected number list is printed.
User's Data List

This function may not be available depending on the country or region of purchase.
Refer to Loading Paper / Originals.
The Fax settings screen is displayed.
button to select Print reports/lists, then press the OK button.
button to select Caller history list, then press the OK button.

The Caller history list is printed.
This machine can print a TX (transmission) report after sending a document, confirming whether the transmission has been completed successfully. At the time of purchase, TX reports are set to be printed only when a transmission error occurred. You can set the machine to print a report each time it sends a document, or disable printing of the report.
For details on the TX report settings, see TX report. For the errors that occur when you send a fax, see Errors when you send a fax .
Errors when you send a fax If an error occurs when you send a fax, the error number is printed in the TX report (there are some errors for which the cause is also printed). The causes corresponding to the error numbers are as follows.
No. Cause Action
#001 Document is jammed in the ADF.
The document is jammed in the ADF. Remove the document page jammed in the ADF. When the error is cleared, redo the operation. See Document Jams in the ADF.
#003 Document is too long. You attempted to send a document longer than 15.75 inches / 400 mm. You cannot send a document longer than 15.75 inches / 400 mm from the ADF. #003 is also printed if it takes time to send a page. Divide the document or set the image quality (Fax resolution) to a lower setting, then resend it.
#005 No answer. The recipient's fax machine does not respond. Contact the recipient and have the recipient check that the telephone line is connected correctly.
#012 Try again. There is no paper in the recipient's fax machine. Contact the recipient and have the recipient load paper.
#017 No tone is detected. The machine could not detect the dial tone.

Dial tone detect in Transmission settings is set to ON. Set it to OFF, then send the fax.
#018 Line was busy. The fax/telephone number you dialed is busy. Try dialing again after waiting for a moment.
#022 Try again. The fax/telephone number registered to coded speed dial is incorrect. Check the recipient's fax/telephone number, correct the fax/telephone number registered to the coded speed dial code, then send the document again.
#037 Memory is full. The machine could not send a document because its memory is full. Resend the document after deleting contents in memory. See Deleting a Document in Memory.
#059 Transmission has been canceled due to a fax information mismatch.
Transmission has been canceled because the machine could not detect the recipient's fax machine information or the information did not match the dialed number. This error number is displayed when Check RX fax info is set to ON. For details, see Sending Faxes after Checking Information (Checking the Recipient's Information).
#085 Try again in black & white transmission.
The recipient's fax machine is not color- compatible. Resend the document in black & white.
STOP The Stop button was pressed during transmission.
The Stop button was pressed to cancel transmission of the document. Resend it if necessary.
This machine can print a RX (reception) report after receiving a document, confirming whether the reception has been completed successfully. At the time of purchase, the machine is set so that RX reports are not printed at all. You can set the machine to print a report each time it receives a document, or only when an error occurs.
For details on the RX report settings, see RX report. For the errors when you receive a fax, see Errors when you receive a fax.
Errors when you receive a fax If an error occurs when you receive a fax, the error number is printed in the RX report (there are some errors for which the cause is also printed). The causes corresponding to the error numbers are as follows.
No. Cause Action
#003 It takes too long to receive a page.
Contact the sender and have the sender divide the fax or set the image quality (Fax resolution) to a lower setting and resend it.
#005 No answer. When receiving a fax manually, the machine could not detect the signals from the sender's fax machine. Contact the sender and have the sender resend it, or set the machine to receive the fax automatically.
#037 Memory is full. The machine could not receive a fax because its memory is full. Delete contents in memory, then ask the sender to resend the fax. See Deleting a Document in Memory.

#046 Reception has been rejected due to the specified fax rejection condition.
Reception has been rejected because the fax matches the fax rejection condition specified by Fax reception reject. For details, see Rejecting Fax Reception.
STOP The Stop button was pressed during reception.
The Stop button was pressed to cancel reception of the fax. Contact the sender and have the sender resend it if necessary.
This machine prints out a MULTI TX (transmission) report after sending the same document to several destinations, confirming whether the transmission to all the recipients has been completed successfully.

Advanced Guide > Faxing > Sending Faxes from a Computer
Creating an Address Book
Sending a FAX

Advanced Guide > Faxing > Sending Faxes from a Computer > Sending a FAX
You can send faxes using the fax driver from applications that support document printing.
You can only specify one fax recipient. You cannot send a fax to two or more recipients in one operation. Only black and white transmission is supported.

* Print dialog box in NotePad
You can specify the paper size and print orientation by clicking Preferences or Properties (for Windows 2000: Fax Options tab or Properties) in the Print dialog box. For details, see the help for the fax driver.



You can also register a recipient in the recipient list by following the instructions below: 1. Click Display Address Book..., select a recipient from the recipient list 2. Click Add to Recipient List 3. Click OK For details on valid characters, see the help for the fax driver. You can register the recipient you entered to the address book by clicking Add to Address Book For details on the address book, see " Creating an Address Book ."
A confirmation message is displayed when transmission finishes.

If you cannot send a fax because of line failure etc., see " Problems Sending Faxes."
If you click Send Now in the Send Fax dialog box, the printer icon is displayed in the taskbar. Double-click this icon to display the list of fax jobs awaiting transmission or being sent.
Right-clicking a job and selecting Cancel stops transmission.


Advanced Guide > Faxing > Sending Faxes from a Computer > Creating an Address Book
By using the address book, you can send a fax by simply specifying a recipient from it. You can register the recipient's name, fax number and other information in the address book.
You can register an individual recipient (Contact) in the address book.


In Windows XP/Windows 2000, when you open the address book for the first time, the Setup Windows Address Book dialog box will be displayed.


Select Create new Windows Address Book file for MP., then click OK.
You can also change the setting later so as to be able to use another address book. For details, see the help for the fax driver.
Select this option if you do not create a new address book file exclusively for faxing.
Click Select existing Windows Address Book file., select an address book file from the list, then click OK.

Using an existing Windows Address Book enables you to share it with other applications that use Windows Address Books.
This option cannot be selected if there is no Windows Address Book file created.
In Windows Vista, you can register an individual recipient (Contact) in the address book folder (Windows Address Book) as an address book file (.contact file) which can be used in multiple applications. However, you cannot change the address book you use, as only one address book can be created per user. To open the Windows Address Book, click the Start button, then click All Programs > Windows Contacts. In Windows XP/Windows 2000, you can change the address book you use to another existing address book by clicking the Address Book Profile... in the Canon MX320 series FAX Printing Preferences dialog box. For details, see the help for the fax driver. For details on how to open the Windows Address Book (the default address book of the operating system), see the help or manual for the applications that use Windows Address Book.




To send a fax, you can only specify one recipient. You cannot specify a Distribution List.
The recipient's name will be printed at the top of the fax received by the recipient.



You can also register a recipient by clicking the Add to Address Book... button on the Send Fax dialog box after entering the recipient.

If you upgrade from Windows XP to Windows Vista, the address book you created in Windows XP may not be reflected in Windows Vista. In this case, open the address book in the following procedure and reflect the information to a new address book. 1. On the Windows taskbar, click the Start button, then click Control Panel > Appearance and Personalization > Folder Options. 2. Click the View tab of the Folder Options dialog box, select Show hidden files and folders in Advanced settings, then click OK. 3. On the Windows taskbar, click the Start button, click XXXX (user name), then double-click AppData > Roaming > Canon > MP5 to open the folder. 4. Double-click the ".wab" file. The address book will be reflected in Windows Vista automatically.
In Windows XP/Windows 2000, you can use or import another Windows Address Book. For details, see the help for the fax driver.
Edit or Remove a Recipient from an Address Book
Search for a Recipient in an Address Book


Page 615 of 817 pages Edit or Remove a Recipient from an Address Book
Advanced Guide > Faxing > Sending Faxes from a Computer > Edit or Remove a Recipient from an Address Book
You can change the recipients' names, fax numbers and other information, or delete recipients registered in the address book.
You can edit the contact information registered in the address book.


Page 616 of 817 pages Edit or Remove a Recipient from an Address Book

You can delete the contacts registered in the address book.

Page 617 of 817 pages Edit or Remove a Recipient from an Address Book


Page 618 of 817 pages Search for a Recipient in an Address Book
Advanced Guide > Faxing > Sending Faxes from a Computer > Search for a Recipient in an Address Book
You can search for recipients registered in the address book by name.
* Print dialog box in NotePad

If the entered name is found, the recipient will be displayed in the contact list with its name selected.

Page 619 of 817 pages Search for a Recipient in an Address Book


You cannot search by criteria other than name.

Page 620 of 817 pages Printing Photographs Directly from a Compliant Device or a Wireless Comm...
Advanced Guide > Printing Photographs Directly from a Compliant Device or a Wireless Communication Device
Printing Photographs Directly from a Compliant Device
Printing Photographs from a Wireless Communication Device

Advanced Guide > Printing Photographs Directly from a Compliant Device or a Wireless Communication Device > Printing Photographs Directly from a Compliant Device
Printing Photographs Directly from a Compliant Device
About PictBridge Print Settings

Advanced Guide > Printing Photographs Directly from a Compliant Device or a Wireless Communication Device > Printing Photographs Directly from a Compliant Device > Printing Photographs Directly from a Compliant Device
You can connect a PictBridge compliant device such as a digital camera, camcorder, or mobile phone using a USB cable recommended by the device's manufacturer, and print recorded images directly without using a computer.
When printing photos with the PictBridge compliant device connected to the machine, we recommend the use of the AC adapter supplied with the device. If you are using the device battery, be sure to charge it fully. Depending on the model or brand of your device, you may have to select a print mode compliant with PictBridge before connecting the device. You may also have to turn on the device or select Play mode manually after connecting the device to the machine. Perform necessary operations on the PictBridge compliant device before connecting it to this machine according to instructions given in the device's instruction manual.
The PictBridge compliant device turns on automatically. If your device does not turn on automatically, turn it on manually.
will appear on the LCD of the device when the machine is correctly connected.

You can perform settings using the menu on the LCD of your PictBridge compliant device. Select the size and type of paper that you loaded in the machine.
Settings on a PictBridge Compliant Device If your PictBridge compliant device does not have a setting menu, change the setting from the machine.

Settings on the Machine
Never disconnect the USB cable during printing unless when explicitly allowed to by the PictBridge compliant device. When disconnecting the USB cable between the PictBridge compliant device and machine, follow the instructions given in the device's instruction manual.

Advanced Guide > Printing Photographs Directly from a Compliant Device or a Wireless Communication Device > Printing Photographs Directly from a Compliant Device > About PictBridge Print Settings
Settings on a PictBridge Compliant Device
Settings on the Machine
This section describes the PictBridge function of the machine. For the print settings on a PictBridge compliant device, refer to the instructions given in the device's instruction manual.
In the following description, names of setting items are given according to those used in Canon-brand PictBridge compliant devices. Setting item names may be different depending on the brand or model of your device. Some setting items explained below may not be available on some devices. In this case, the settings made on the machine are applied. Also, when some items are set to Default on a PictBridge compliant device, the machine settings for these items are applied.
Settings on the Machine
The following settings can be used when printing from a PictBridge compliant device.
Paper size 4" x 6"/10 x 15 cm, 5" x 7"*1, 8" x 10"/ 20 x 25 cm, A4, 8.5" x 11"(Letter), 4" x 7.1"/ 10.1 x 18 cm*2 *1 10x15 may appear on some PictBridge compliant device. *2 Hi Vision may appear on a non-Canon brand PictBridge compliant device.
Paper type Default (Selections based on the machine setting) Photo: Photo Paper Plus Glossy II PP-201/Glossy Photo Paper "Everyday Use" GP- 501/Photo Paper Glossy GP-502/Photo Paper Plus Semi-gloss SG-201 Fast Photo: Photo Paper Pro II PR-201 Plain: A4/Letter When Paper type is set to Plain, borderless printing will be disabled even when Layout is set to Borderless.
Layout Default (Selections based on the machine setting), Index, Bordered, Borderless, 4-up* * Layout compatible with A4/Letter sized paper
Print date & file no.
Default *1, On (Exif Print), Off, Face*2, Red-Eye*2 *1 Photos are optimized for printing using the Photo optimizer pro function. *2 Can be selected only on certain Canon-brand PictBridge compliant devices. (May not be selected depending on the device.)
You can change the PictBridge print settings from the PictBridge settings screen. Set the print settings to Default on the PictBridge compliant device when you want to print according to the settings on the machine. This section describes the procedure to display the PictBridge settings screen. For setting items, see PictBridge settings.
Image optimize

3. Use the
button to select PictBridge settings, then press the OK button.

Advanced Guide > Printing Photographs Directly from a Compliant Device or a Wireless Communication Device > Printing Photographs from a Wireless Communication Device
Setting the Page Size, Media Type, and Layout When Printing from a Mobile Phone
Printing via Bluetooth Communication

Page 627 of 817 pages Setting the Page Size, Media Type, and Layout When Printing from a Mobil...
Advanced Guide > Printing Photographs Directly from a Compliant Device or a Wireless Communication Device > Printing Photographs from a Wireless Communication Device > Setting the Page Size, Media Type, and Layout When Printing from a Mobile Phone
Setting the Page Size, Media Type, and Layout When Printing from a Mobile Phone
When printing from a mobile phone through Bluetooth communication, select the page size, media type, layout, and etc. on the Mobile phone settings screen. For details on how to print from a computer through Bluetooth communication, refer to About Bluetooth Communication .
* The default is borderless printing on 4" x 6" Photo Paper Plus Glossy II.
This section describes how to display the Mobile phone settings screen. For setting items, see Mobile phone settings.
Insert the Bluetooth Unit BU-30 to the Direct Print Port.

button to select Mobile phone settings, then press the OK button.

Advanced Guide > Printing Photographs Directly from a Compliant Device or a Wireless Communication Device > Printing Photographs from a Wireless Communication Device > Printing via Bluetooth Communication
This section describes the procedure to print photos through Bluetooth communication from a mobile phone with the optional Bluetooth Unit BU-30.
When printing from a mobile phone through Bluetooth communication, refer also to your product's instruction manual.
For the procedure to print through Bluetooth communication from the computer, refer to About Bluetooth Communication.
Mobile phones supporting OPP (Object Push Profile) or BIP (Basic Imaging Profile) can be used to print photos. Depending on your mobile phone, you may not perform printing even if your mobile phone supports the profiles above. For information on the profiles your mobile phone supports, refer to your product's instruction manual.
Insert the Bluetooth Unit BU-30 to the Direct Print Port.
Setting the Page Size, Media Type, and Layout When Printing from a Mobile Phone
For the device name, select the default value Canon XXX-1 (where "XXX" is your machine's name).
If you are required to input a passkey, input the default value "0000".
You can change the device name of the machine, passkey, and so on from the Bluetooth settings screen.
Changing the Bluetooth Settings

Communication is possible in a range of up to about 33 ft. / 10 m depending on the conditions below. Printing speed may vary depending on the following conditions: Presence of obstacles between the communication equipment, and radio conditions. Presence of magnetic fields, static electricity, or electromagnetic interference. Receiver sensitivity and antenna performance of the communication equipment. Video files cannot be printed. Depending on your device, data saved on a memory card may not be printed. About transmittable data
Due to security settings on the mobile phone, downloaded content or photos downloaded from a URL attached to an E-mail cannot be printed. Depending on the size of a photo, it may take a while for this machine to start printing after starting wireless communication. Printed quality and orientation (portrait or landscape) is determined automatically according to the shot photo size. Depending on the photo size shot on the mobile phone, the edges of the image may be cut off when performing borderless printing; the margin size may change when printing with borders. If the photo file is over 1.8 MB in size, it may not be possible to send the file.

Advanced Guide > Printing Photographs Directly from a Compliant Device or a Wireless Communication Device > Printing Photographs from a Wireless Communication Device > Printing via Bluetooth Communication > Changing the Bluetooth Settings
As preparation for printing through Bluetooth communication, you can change the settings such as the device name and passkey from the Bluetooth settings screen. This section describes how to display the Bluetooth settings screen. For each setting item, see Bluetooth settings.
Insert the Bluetooth Unit BU-30 to the Direct Print Port.
button to select Bluetooth settings, then press the OK button.
The Bluetooth settings screen is displayed.

Advanced Guide > Maintenance
Performing Maintenance from a Computer
Cleaning Your Machine

Advanced Guide > Maintenance > Cleaning Your Machine
Cleaning the Exterior of the Machine
Cleaning the Platen Glass and Document Cover
Cleaning the Inside of the Machine (Bottom Plate Cleaning)
Cleaning the Protrusions Inside the Machine
Cleaning · Cleaning the ADF

Advanced Guide > Maintenance > Cleaning Your Machine > Cleaning
This section describes the cleaning procedure that is needed to maintain your machine.
Do not use tissue paper, paper towels, rough-textured cloth, or similar materials for cleaning so as not to scratch the surface. Paper tissue powder or fine threads may remain inside the machine and cause problems such as print head blockage and poor printing results. Be sure to use a soft cloth. Never use volatile liquids such as thinners, benzene, acetone, or any other chemical cleaner to clean the machine, as this may cause a malfunction or damage the machine's surface.
Cleaning the Exterior of the Machine
Cleaning the Platen Glass and Document Cover
Cleaning the Inside of the Machine (Bottom Plate Cleaning)
Cleaning the Protrusions Inside the Machine
Cleaning the ADF

Advanced Guide > Maintenance > Cleaning Your Machine > Cleaning the Exterior of the Machine
Be sure to use a soft cloth such as eyeglasses cleaning cloth and wipe off dirt on the surface gently. Smooth out wrinkles on the cloth if necessary before cleaning.
Be sure to turn off the power and disconnect the power plug before cleaning the machine. The power cannot be turned off while the machine is sending or receiving a fax, or when there are unsent faxes stored in the machine's memory. The machine cannot receive faxes when the power is turned off. If you disconnect the power cord, all the documents stored in memory are deleted. Send or print necessary documents before disconnecting the power cord. Do not use tissue paper, paper towels, rough-textured cloth, or similar materials, as this may scratch the surface.

Advanced Guide > Maintenance > Cleaning Your Machine > Cleaning the Platen Glass and Document Cover
Be sure to turn off the power and disconnect the power plug before cleaning the machine. The power cannot be turned off while the machine is sending or receiving a fax, or when there are unsent faxes stored in the machine's memory. The machine cannot receive faxes when the power is turned off. If you disconnect the power cord, all the documents stored in memory are deleted. Send or print necessary documents before disconnecting the power cord.
With a clean, soft, lint-free cloth, wipe the Platen Glass (A), the inner side of the Document Cover (white sheet) (B), the glass of the ADF (C), and the inner side of the ADF (white area) (D) gently. Be sure not to leave any residue, especially on the Platen Glass.

The inner side of the Document Cover (white sheet) (B) is easily damaged, so wipe it gently.

Advanced Guide > Maintenance > Cleaning Your Machine > Cleaning the ADF
Be sure to turn off the power and disconnect the power plug before cleaning the machine. The power cannot be turned off while the machine is sending or receiving a fax, or when there are unsent faxes stored in the machine's memory. The machine cannot receive faxes when the power is turned off. If you disconnect the power cord, all the documents stored in memory are deleted. Send or print necessary documents before disconnecting the power cord.





Page 638 of 817 pages Cleaning the Inside of the Machine (Bottom Plate Cleaning)
Advanced Guide > Maintenance > Cleaning Your Machine > Cleaning the Inside of the Machine (Bottom Plate Cleaning)
This section explains how to clean the inside of the machine. If the inside of the machine becomes dirty, printed paper may get dirty, so we recommend performing cleaning regularly.

(A) Load the paper after unfolding it.
button to select Bottom cleaning, then press the OK button.
The paper cleans the inside of the machine as it feeds through the machine. Check the folded part of the ejected paper. If it is smudged with ink, perform Bottom Plate Cleaning again. If the problem is not resolved after performing cleaning again, the protrusions inside the machine may be stained. Clean them according to instructions.
Cleaning the Protrusions Inside the Machine
When performing Bottom Plate Cleaning again, be sure to use a new sheet of paper.

Advanced Guide > Maintenance > Cleaning Your Machine > Cleaning the Protrusions Inside the Machine
If protrusions inside the machine are stained, wipe off any ink from the protrusions using a cotton swab or the like.
Be sure to turn off the power and disconnect the power plug before cleaning the machine. The power cannot be turned off while the machine is sending or receiving a fax, or when there are unsent faxes stored in the machine's memory. The machine cannot receive faxes when the power is turned off. If you disconnect the power cord, all the documents stored in memory are deleted. Send or print necessary documents before disconnecting the power cord.


Advanced Guide > Maintenance > Performing Maintenance from a Computer
Cleaning the Print Heads
Cleaning the Paper Feed Rollers
Aligning the Print Head Position
Checking the Print Head Nozzles
Cleaning Inside the Machine

Advanced Guide > Maintenance > Performing Maintenance from a Computer > Cleaning the Print Heads
The print head cleaning function allows you to remove any blockages in the print head nozzles. Perform print head cleaning if printing is faint or a specific color fails to print, even though there is enough ink.
The procedure for cleaning the print heads is as follows:
1. Open the printer driver setup window
2. Click Cleaning on the Maintenance tab
The Print Head Cleaning dialog box opens. Follow the instruction shown in the dialog box. Click Initial Check Items to display the items you need to check before performing Cleaning.
Make sure that the machine is on and then click Execute.
Print head cleaning starts.
The Nozzle Check dialog box opens after the confirmation message.
To check whether the print quality has improved, click Print Check Pattern. To cancel the check process, click Cancel.
If cleaning the head once does not resolve the print head problem, clean it once more.
Deep Cleaning is more thorough than Cleaning. Perform deep cleaning when two cleaning attempts do not resolve the print head problem.
2. Click Deep Cleaning on the Maintenance tab
The Deep Cleaning dialog box opens. Follow the instruction shown in the dialog box. Click Initial Check Items to display the items you need to check before performing Deep Cleaning.
Make sure that the machine is on and then click Execute. Click OK when the confirmation message appears.
Print head deep cleaning starts.
The Nozzle Check dialog box opens after the confirmation message.
To check whether the print quality has improved, click Print Check Pattern. To cancel the check

process, click Cancel.
Cleaning consumes a small amount of ink. Deep Cleaning consumes a larger amount of ink than Cleaning. Cleaning the print heads frequently will rapidly deplete your printer's ink supply. Consequently, perform cleaning only when necessary.
If there is no sign of improvement after Deep Cleaning, switch off the machine, wait 24 hours, and then perform Deep Cleaning again. If there is still no sign of improvement, the ink may have run out or the print head may be worn. For details on the remedial action to be taken, see " Machine Moves But Ink Is Not Ejected."
Checking the Print Head Nozzles

Advanced Guide > Maintenance > Performing Maintenance from a Computer > Cleaning the Paper Feed Rollers
The feed roller cleaning function allows you to clean the paper feed roller. Perform feed roller cleaning when there are paper particles sticking to the paper feed roller and paper is not fed properly.
The procedure for cleaning the feed rollers is as follows:
1. Prepare the machine
Remove all sheets of paper from the rear tray.
3. Click Roller Cleaning on the Maintenance tab
The confirmation message appears.
Make sure that the machine is on and click OK. Paper feed roller cleaning starts.
After the rollers have stopped, follow the instruction in the message, load three sheets of plain paper into the rear tray, and click OK.
Paper will be ejected and feed roller cleaning will be completed.

Advanced Guide > Maintenance > Performing Maintenance from a Computer > Aligning the Print Head Position
Print head alignment corrects the installation positions of the print head and improves deviated colors and lines.
The procedure for performing print head alignment is as follows:
1. Open the printer driver setup window
2. Click Print Head Alignment on the Maintenance tab
The Start Print Head Alignment dialog box opens.
Load two sheets of A4 size or Letter size plain paper into the rear tray.
Make sure that the machine is on and click Align Print Head. Follow the instruction in the message.
To check the current setting before you adjust the print head position, click Print Alignment Value.
Enter the numbers of the patterns with the least amount of streaks in the associated boxes. Clicking the patterns with the least amount of streaks in the preview window, will automatically set their numbers in the associated boxes.
When you have entered all the necessary values, click OK.
If you look at the print results and still cannot determine which pattern is the one with the least amount of streaks, see your machine manual.
Follow the instruction in the message.

Advanced Guide > Maintenance > Performing Maintenance from a Computer > Checking the Print Head Nozzles
The nozzle check function allows you to check whether the print heads are working properly by printing a nozzle check pattern. Print the pattern if printing becomes faint, or if a specific color fails to print.
The procedure for printing a nozzle check pattern is as follows:
1. Open the printer driver setup window
2. Click Nozzle Check on the Maintenance tab
The Nozzle Check dialog box opens. To display a list of items that you should check before printing the check pattern, click Initial Check Items.
Load a sheet of A4 size or Letter size plain paper into the rear tray.
Make sure that the machine is on and click Print Check Pattern. The nozzle check pattern is printed.
Click OK when the confirmation message appears. The Pattern Check dialog box opens.
Check the print result. If the print result is normal, click Exit. If the print result is smudged or if there are any unprinted sections, click Cleaning to clean the print head.
Cleaning the Print Heads

Advanced Guide > Maintenance > Performing Maintenance from a Computer > Cleaning Inside the Machine
The bottom plate cleaning function allows you to prevent smudges on the back side of the paper. Perform bottom plate cleaning before you execute duplex printing. Also perform bottom plate cleaning if ink smudges caused by something other than print data appear on the printed page.
For details on how to load paper into the machine, see " Cleaning the Inside of the Machine (Bottom Plate Cleaning)."
The procedure for performing bottom plate cleaning is as follows:
1. Open the printer driver setup window
2. Click Bottom Plate Cleaning on the Maintenance tab
The Bottom Plate Cleaning dialog box opens.
As instructed in the dialog box, fold the A4 size or Letter size plain paper in half horizontally, and then unfold the sheet. Load the paper into the rear tray in the portrait orientation with the crest of the crease facing down.
Make sure that the machine is on and click Execute. Bottom plate cleaning starts.

Advanced Guide > About Bluetooth Communication
Preparation to Use the Bluetooth Unit
Printing Data via Bluetooth Communication
Basic Procedure for Printing via Bluetooth Communication

Advanced Guide > About Bluetooth Communication > Handling Precautions
Shipping the Product

Advanced Guide > About Bluetooth Communication > Handling Precautions > Shipping the Product
This product may not be used in countries or regions other than the country or region where it was purchased due to local laws and regulations. Please note that the use of this product in such countries or regions may lead to penalties and that Canon should not be liable for such punishment.

Advanced Guide > About Bluetooth Communication > Preparation to Use the Bluetooth Unit
Attaching to and Removing from the Printer
Bluetooth Unit

Advanced Guide > About Bluetooth Communication > Preparation to Use the Bluetooth Unit > Bluetooth Unit
The Bluetooth Unit BU-30 (hereafter referred to as the Bluetooth unit) is an adaptor which can be used with a Canon IJ printer with Bluetooth interface.
By attaching the Bluetooth unit to a Canon IJ printer with Bluetooth interface, wireless printing from a Bluetooth enabled device, such as a computer or mobile phone, is possible.
Communication is possible in a range of up to about 33 ft. / 10 m depending on the conditions below. Printing speed may vary depending on the following conditions: -Presence of obstacles between the communication equipment and radio wave conditions. -Presence of magnetic fields, static electricity or electromagnetic interference. -Software and operating system to be used. -Receiver sensitivity and antenna performance of the communication equipment.

Advanced Guide > About Bluetooth Communication > Preparation to Use the Bluetooth Unit > Attaching to and Removing from the Printer
Attaching the Bluetooth Unit to the Printer
Removing the Bluetooth Unit from the Printer
Attach the Bluetooth unit to the Direct Print Port (A) of the printer in accordance with the following procedure.
The external appearance may differ depending on the printer you are using.

Make sure that any lamp on the Operation Panel is lit.
Detach the cap from the Bluetooth unit. Store the cap in a safe location.

When the Bluetooth unit is properly attached to the printer with the Power lamp, the

Power lamp on the printer flashes twice. When the Bluetooth unit is properly attached to the printer without the Power lamp, the COPY button on the printer flashes twice.
Remove the Bluetooth unit from the Direct Print Port of the printer in accordance with the following procedure.
Make sure that the lamp on the Bluetooth unit is neither lit nor flashing before you remove the Bluetooth unit.

Store the Bluetooth unit with the cap attached.

Advanced Guide > About Bluetooth Communication > Printing Data via Bluetooth Communication
Installing the MP Drivers

Advanced Guide > About Bluetooth Communication > Printing Data via Bluetooth Communication > Preparation
In order to print via Bluetooth communication with Windows, the following system requirements must be satisfied.
A computer in which an internal Bluetooth module is installed or a computer to which an optional Bluetooth adapter (available from various manufacturers) is attached.
Microsoft Windows Vista (Satisfying any one of the following conditions is needed)
Bluetooth Stack for Windows by Toshiba Version 5.10.04 or later is installed
Microsoft Windows XP (Satisfying any one of the following conditions is needed)
Windows XP SP2 or later is installed, and Bluetooth Devices is displayed in Printers and Other Hardware under Control Panel
For more information about how to confirm the version of Bluetooth Stack for Windows by Toshiba, see Check 2: Is unsupported Bluetooth driver used? .
In order to connect the Bluetooth unit and print via Bluetooth communication, the following steps are required.
See Attaching to and Removing from the Printer .
See Installing the MP Drivers .
See Setting the Printer.
When using Windows Vista, and when Bluetooth Devices is displayed in Hardware and Sound under Control Panel Authenticate the printer as a Bluetooth device on Bluetooth Devices in Hardware and Sound under Control Panel.
See Registering the Printer.
When using Windows XP SP2 or later, and when Bluetooth Devices is displayed in Printers and Other Hardware under Control Panel
Authenticate the printer as a Bluetooth device on Bluetooth Devices in Printers and Other Hardware under Control Panel.
See Registering the Printer.
When using a Toshiba Windows Vista or Windows XP computer
Authenticate the printer as a Bluetooth device using Bluetooth Settings*.
* When the computer which has Bluetooth Stack for Windows by Toshiba or the program attached to the Bluetooth adapter of the option manufactured by Toshiba is used, the computer can register a printer easily.
Bluetooth Settings can be started by clicking Start and selecting All Programs, TOSHIBA, Bluetooth, and Bluetooth Settings.
For details on Bluetooth Settings, refer to the software application's instruction manual.

The operations may vary depending on your operating program. In this case, refer to your computer's operation manual.

Advanced Guide > About Bluetooth Communication > Printing Data via Bluetooth Communication > Installing the MP Drivers
If you use the printer connecting with a computer, the MP Drivers have already been installed. In this case, move to the next step.
Before connecting the Bluetooth unit to the printer for wireless printing, first the USB cable must be connected between the printer and computer, and the MP Drivers must be installed using the Setup CD- ROM.
Install the MP Drivers according to your setup manual.
Setting the Printer

Advanced Guide > About Bluetooth Communication > Printing Data via Bluetooth Communication > Setting the Printer
This section describes the procedures for checking the settings of the Bluetooth unit on the LCD of the printer in preparation for Bluetooth printing.
Canon IJ printers with the Bluetooth interface are divided into two types. One is equipped with a graphic LCD, and the other with a text LCD.
If you need more information about the Bluetooth settings, see Setting Bluetooth Printing .
For information about how to attach the Bluetooth unit, see Attaching to and Removing from the Printer.
For information about how to display the Bluetooth settings screen, refer to Changing the Machine Settings on the LCD.


If the Bluetooth settings screen is not displayed on the LCD, the Bluetooth unit may not be attached correctly. Remove the Bluetooth unit from the printer and attach it once again. For details, see Attaching to and Removing from the Printer . If the Bluetooth settings screen still is not displayed, the Bluetooth unit may be faulty. In this case, contact the service center.
The Device name screen is displayed.



The device name is necessary to register the printer as a Bluetooth device. Be sure to note the device name.
If multiple printer units with the same model name are connected to the system, assigning a different device name to each printer is recommended for easy identification of the printer you will use. See Bluetooth Settings Screen.
After checking the device name, press the OK button on the printer. After checking the Bluetooth settings using the LCD, register the printer on your computer.
Registering the Printer

Advanced Guide > About Bluetooth Communication > Printing Data via Bluetooth Communication > Registering the Printer
Register the printer as a Bluetooth device using Bluetooth Devices under Control Panel.
The following procedure is described assuming that Windows Vista has been installed in your computer. Before registering the printer on Bluetooth Devices under Control Panel, enable the Bluetooth function of your computer. For more information, refer to your computer's operation manual. If you want to re-register the printer as a Bluetooth device, first delete the registered printer, and then re-register it. See Deleting the Printer.
In non-Vista Windows, click Control Panel, Printers and Other Hardware, then Bluetooth Devices.

Add Bluetooth Device Wizard will start.



Select the same device name as that checked under Setting the Printer.
If the device name is not displayed, see Check 3: Is the printer name which you want to register displayed in Printer List?.


If you set a passkey on the printer, select Use the passkey found in the documentation and input the passkey then click Next. For more information about a passkey, see Bluetooth Settings Screen.


Now, the settings for printing via Bluetooth communication are ready.
In Windows Vista, the Windows needs to install driver software for your Bluetooth Peripheral Device screen may be displayed automatically. In this case, click Don't show this message again for this device.

Advanced Guide > About Bluetooth Communication > Printing Data via Bluetooth Communication > Deleting the Printer
This section describes the procedure to delete the registered printer.
If you want to re-register the printer as a Bluetooth device, first follow the procedure below to delete the printer, and then re-register it.
For the procedure to re-register the printer, see Registering the Printer.
When using non-Vista Windows, click Control Panel, then Printers and Faxes under Printers and Other Hardware.
When using non-Vista Windows, select Delete from the File menu.

Advanced Guide > About Bluetooth Communication > Basic Procedure for Printing via Bluetooth Communication
Printing with Bluetooth Compliant Devices other than a Computer
Printing with Computers

Advanced Guide > About Bluetooth Communication > Basic Procedure for Printing via Bluetooth Communication > Printing with Computers
When using Bluetooth communication, also refer to the computer's instruction manual.
When printing from a Bluetooth compliant device other than a computer, see Printing with Bluetooth Compliant Devices other than a Computer.
Depending on your application program, operations may differ. For details, refer to the instruction manual of your software application. The steps described in this section are for printing in Windows Vista. Bluetooth communication distance: Approx. 33 ft./10 m in normal environment. The distance may vary depending on the radio conditions or the communication equipment.
The Print dialog box opens.
The Quick Setup sheet of the Printing Preferences dialog box is displayed.

The printer registered on Bluetooth Devices is displayed as Canon XXX Printer (Copy X). "X" is a device name or a digit. The number of digits may differ depending on the printer.


You can specify the advanced print settings on Main sheet and Page Setup sheet. For details on the print settings, refer to Various Printing Methods.
The Print dialog box is displayed.

Printing begins.
When you use a USB cable for printing, select Canon XXX Printer from Select Printer. To cancel a print job in progress, press the Stop button on the printer or click Cancel Printing on the printer status monitor. After printing is canceled, a sheet of paper may be ejected with no printing results.

To display the printer status monitor, click Canon XXX Printer (Copy X) on the taskbar. "X" is a device name or a digit. The number of digits may differ depending on the printer.

Page 668 of 817 pages Printing with Bluetooth Compliant Devices other than a Computer
Advanced Guide > About Bluetooth Communication > Basic Procedure for Printing via Bluetooth Communication > Printing with Bluetooth Compliant Devices other than a Computer
The LCD of the printer allows you to perform settings for printing using Bluetooth compliant devices other than a computer.
When you print with one of these devices, also refer to your product's instruction manual.
When printing from a computer, see Printing with Computers.
Mobile phones, PDAs and digital cameras supporting OPP (Object Push Profile) or BIP (Basic Imaging Profile) can print photos. Depending on your product, you may not perform printing even if your product supports the profiles above. For details of profiles, refer to your product's instruction manual.
For information about how to display the Mobilephone print setting or Mobile phone settings screen, refer to Changing the Machine Settings on the LCD .
When you select the device name, select the initial value of the printer "Canon XXX-1" (where "XXX" is your printer's name). If you are required to input the passkey, input the initial value "0000". You can change the device name of the printer or passkey on the Bluetooth settings screen on the LCD.
Setting Bluetooth Printing

Advanced Guide > About Bluetooth Communication > Bluetooth Settings
Setting Bluetooth Printing · Bluetooth Settings Screen

Advanced Guide > About Bluetooth Communication > Bluetooth Settings > Setting Bluetooth Printing
When the Bluetooth unit is properly attached to the printer with the Power lamp, the Power lamp on the printer flashes twice. When the Bluetooth unit is properly attached to the printer without the Power lamp, the COPY button on the printer flashes twice.
For information about how to display the Bluetooth settings screen, refer to Changing the Machine Settings on the LCD.
For information about how to set a media type and a paper size when printing from a mobile phone, refer to Changing the Machine Settings on the LCD .
Bluetooth Settings Screen

Advanced Guide > About Bluetooth Communication > Bluetooth Settings > Bluetooth Settings Screen
Canon IJ printers with the Bluetooth interface are divided into two types. One is equipped with a graphic LCD, and the other with a text LCD.


Displays the device name of the printer to which the Bluetooth unit is attached.
Selecting ON will disable searching of this printer by a Bluetooth-compatible device.
Select Enable and then specify the security mode to activate the passkey set on the Passkey screen.
You can change the passkey. The passkey refers to an identification number to be determined. It is used to prevent unwanted access from other Bluetooth devices. The initial value is set to 0000.
Allows you to set the device name of the printer on a Bluetooth device.
Ex:

When you select MX860 series-2, the printer name displayed on the Bluetooth device is Canon MX860 series-2.
The initial value is set to MX860 series-1.


When you search from a Bluetooth device, you can enable or disable the display of the printer name.
Disables searching from a Bluetooth device.
Enables searching and printing from a Bluetooth device.
Enable
Selecting Enable allows you to choose either of the security modes below.
Mode 3(recommended) This mode is activated on link level enforced security. The passkey will be required when a Bluetooth device communicates with the printer. Normally select this mode. Mode 2 This mode is activated on service level enforced security. The passkey will be required when printing through the Bluetooth communication.
After setting the security mode, we recommend making a trial print through Bluetooth communication. If printing does not start, change the security mode and try again.
Setting a passkey will prevent unwanted access from other Bluetooth devices. You can change the passkey on the Passkey screen.
When you register the printer, you are not required to input a passkey.
When you select Enable on the Security or Security settings screen, you are required to set a passkey to register the printer on other Bluetooth devices.
After you change the passkey, you may be asked to input the passkey on the Bluetooth devices you were able to print from before the passkey was changed. In this case, input the new passkey.




Advanced Guide > About Bluetooth Communication > Troubleshooting
Printer Cannot be Registered
Printing Does Not Start
Troubleshooting

Advanced Guide > About Bluetooth Communication > Troubleshooting > Troubleshooting
This section describes how to solve the problems occurred during the use of the Bluetooth unit.
Problems related to the printer's hardware, MP Drivers installation, and so on, are also described in Troubleshooting.

Advanced Guide > About Bluetooth Communication > Troubleshooting > Printer Cannot be Registered
Install the MP Drivers referring to your setup manual.
Confirm that the Bluetooth driver installed on your computer is supported.
Toshiba Windows Vista or Windows XP computer In Windows Vista, click Start, and select All Programs, TOSHIBA, Bluetooth, then Bluetooth Settings. On the Bluetooth Settings dialog, click the help button, the version number, then make sure that the version number is 5.10.04 or later. In Windows XP, click Start, and select All Programs, TOSHIBA, Bluetooth, then Bluetooth Settings. On the Bluetooth Settings dialog, click the help button, the version number, then make sure that the version number is 3.00.10 or later. Windows Vista (except for Toshiba Windows Vista computers) Log into a user account with the administrator privilege, and click Control Panel, then Hardware and Sound.
Make sure that the
Bluetooth Devices icon is displayed in the dialog. Windows XP SP2 or later (except for Toshiba Windows XP computers) Log into a user account with the administrator privilege, click Control Panel, then Printers and Other Hardware.
Make sure that the
Bluetooth Devices icon is displayed in the dialog.
The operations may vary depending on your operating program. In this case, refer to your computer's operation manual.
Make sure that the printer is turned on. Make sure that any lamp on the Operation Panel is lit. Make sure that the printer is not operating. Check whether the Bluetooth unit is usable. Make sure that the Bluetooth settings screen can be displayed on the LCD of the printer. If the screen cannot be displayed, Bluetooth communication is disabled. Remove the Bluetooth unit from the printer and attach it again.
Attaching to and Removing from the Printer Make sure that the Bluetooth settings screen can be displayed on the LCD of the printer, and try to register again. Check whether access from a Bluetooth-compatible device is refused. Check the printer access setting displaying the Bluetooth settings screen on the LCD of the printer.
For information about how to display the Bluetooth settings screen, refer to Changing the Machine Settings on the LCD .

Advanced Guide > About Bluetooth Communication > Troubleshooting > Printing Does Not Start
Make sure that the Bluetooth settings screen can be displayed on the LCD of the printer. If the screen cannot be displayed, Bluetooth communication is disabled. Remove the Bluetooth unit from the printer and attach it once again.
Attaching to and Removing from the Printer
Make sure that the Bluetooth settings screen can be displayed on the LCD of the printer, and try to print again.
If the Bluetooth settings screen still is not displayed after you remove the Bluetooth unit from the printer and attach it again, the Bluetooth unit may be faulty. In this case, contact the service center.
distance between the printer and computer too great? The maximum communication distance between the printer and a computer is about 33 ft./10 m, but it varies depending on the following conditions:
Presence of obstacles between the communication equipment and radio wave conditions Location where magnetic fields, static electricity, or radio interference occurs Type of software and operating system used Receiver sensitivity and antenna performance of the communication equipment Change the printer installation place or move the printer closer to the computer.
Follow the procedure described below to select the printer to which the Bluetooth unit is attached.
When using non-Vista Windows, click Control Panel, then Printers and Faxes under Printers and Other Hardware.
icon of the printer to be used for printing via Bluetooth communication.
By default, the icon name is Canon XXX Printer (Copy X).
"X" is a device name or a digit. The number of digits may differ depending on the printer.
It may vary depending on how you authenticate the printer. When authenticating the printer as a Bluetooth device in Control Panel BTHnnn (Canon XXX Printer (Copy X)) ("n" is a digit). When authenticating the printer as a Bluetooth device using Bluetooth Settings built in the computer TBPnnn (Canon XXX Printer (Copy X)) ("n" is a digit) For more information about how to register the printer, see Register the printer as a Bluetooth device using Bluetooth Devices. in Preparation.

Do not retry printing. Check the error message on the LCD. Clear the error according to An Error Message Is Displayed on the LCD . When you use a Microsoft Bluetooth driver, make sure that the Printing (HCRP) service is effective on your computer. Click Control Panel, Bluetooth Devices under Hardware and Sound (Printers and Other Hardware in non-Vista Windows), then select the printer to be used for Bluetooth communication and click Properties. Make sure that Printing (HCRP) on the Services sheet is checked. If Printing (HCRP) is not checked or the Printing (HCRP) service is not detected, follow the procedure below and register the printer again.
When using non-Vista Windows, click Control Panel, then Printers and Faxes under Printers and Other Hardware.
icon of the printer for printing via Bluetooth communication.
For more information about the procedure, see Registering the Printer. This message is displayed when the print job is sent from the Bluetooth device while another print job through the USB port is being printed out. Printing will begin automatically when the print queue is finished. Printing cannot be carried out with Bluetooth communication from more than one computer at the same time. In this case, this message is displayed on the computer during standing by. Printing will begin automatically when the print queue is finished.
Bluetooth Devices? If you have installed the MP Drivers after registering the printer as a Bluetooth device on Bluetooth Devices, delete the printer and then register it again.
For more information about the procedure, see Preparation.

Advanced Guide > About Bluetooth Communication > Specifications
Bluetooth v2.0
Maximum Speed 1.44 Mbps
Output Bluetooth Power Class 2
Line-of-sight distance: approx. 33 ft./10 m * * It may vary depending on factors including the presence of obstacles between communication equipment, radio wave conditions, the presence of magnetic fields around microwave ovens and locations where electrostatic and radio interference occur, the types of software and operating systems used, and receiver sensitivity and antenna performance of communication equipment.
Profile SPP (Serial Port Profile) OPP (Object Push Profile) BIP (Basic Imaging Profile) HCRP (Hardcopy Cable Replacement Profile)
Compatible PCs A computer in which an internal Bluetooth module is installed or a computer to which an optional Bluetooth adapter (available from various manufacturers) is attached. OS/Software: Microsoft Windows Vista (Satisfying any one of the following conditions is needed)
Bluetooth Devices is displayed in Hardware and Sound under Control Panel Bluetooth Stack for Windows by Toshiba Version 5.10.04 or later is installed Microsoft Windows XP (Satisfying any one of the following conditions is needed)
Windows XP SP2 or later is installed, and Bluetooth Devices is displayed in Printers and Other Hardware under Control Panel Bluetooth Stack for Windows by Toshiba Version 3.00.10 or later is installed
Frequency band 2.4 GHz band (2.400 GHz to 2.4835 GHz)
Power supply Supplied from the Direct Print Port on the printer, DC 4.4 V to 5.25 V
5 to 35˚C (41 to 95˚F)
Operating humidity 10 to 90% RH (no condensation)
Dimensions (Width x Depth x Height)
18.5 (W) x 47.5 (D) x 8.7 (H) mm (with cap attached) 0.73 (W) x 1.87 (D) x 0.35 (H) inches
Weight Approx. 7 g (0.25 oz)

Advanced Guide > Changing the Machine Settings
Changing the Machine Settings on the LCD
Changing Machine Settings from Your Computer

Advanced Guide > Changing the Machine Settings > Changing the Machine Settings on the LCD
Changing the Machine Settings on the LCD

Advanced Guide > Changing the Machine Settings > Changing the Machine Settings on the LCD > Changing the Machine Settings on the LCD
This section describes the procedure to change the settings in the Device settings screen, taking the steps to specify Extended copy amt. as an example.
The * (asterisk) on the LCD indicates the current setting.
When you change the fax settings, press the Menu button repeatedly until Fax settings appears in the copy mode or the fax mode.

button to select Print settings, then press the OK button.

button to select Extended copy amt., then press the OK button.
button to select a setting item, then press the OK button.


Advanced Guide > Changing the Machine Settings > Changing the Machine Settings on the LCD > Fax settings
This section describes the setting items in User settings, Transmission settings, and Reception settings in the Fax settings menu.
Before changing the settings, you can confirm the current settings by printing the User's Data List. For details, see User's Data List.
Sets whether the machine automatically prints the received fax. When this setting is set to OFF, received faxes are stored in memory.
Document Stored in Memory
When this setting is set to OFF, the following reports are also not printed automatically. Activity report TX (Transmission) report RX (Reception) report MULTI TX (Transmission) report
Print when out of ink: Sets whether to continue printing the received fax without storing it in memory when the ink has run out. When this setting is set to ON, the machine prints the received fax forcibly even if the ink has run out. However, part or all of the fax may not be printed since the ink has run out.
Sets the current date and time.
Specifying the Basic Settings for the Machine
Sets the format of dates displayed on the LCD and printed on sent faxes.
Specifying the Basic Settings for the Machine
Three date formats are available; YYYY/MM/DD, MM/DD/YYYY, and DD/MM/YYYY.
Enables/disables the summer time setting. If you select ON, you can select additional sub- settings. This setting may not be available depending on the country or region of purchase.
Start date/time Sets the date and time that summer time starts. Set month: Specify the month. Set week: Specify the week. Set day of week: Specify the day of the week. Set shift time: Specify the hour (24-hour clock). End date/time Sets the date and time that summer time ends. Set month: Specify the month. Set week: Specify the week. Set day of week: Specify the day of the week. Set shift time: Specify the hour (24-hour clock).
Unit TEL no. registr.

Registers your fax/telephone number printed on sent faxes.
Specifying the Basic Settings for the Machine
Unit name registr.
Registers your name printed on sent faxes.
Specifying the Basic Settings for the Machine
Selects the position of the sender information (outside or inside the image area). After selecting the position, select FAX or TEL to specify the mark to appear before the fax/ telephone number printed on sent faxes.
Specifying the Basic Settings for the Machine
Enables/disables the alarm that alerts you if the handset of the telephone connected to the machine is not hung up properly.
RX ring volume: Selects the ring volume when the machine receives a fax.
Line monitor volume: Selects the line monitor volume.
Adjusts the level of the ringing sound the machine makes when it receives a fax. You can select either Standard or High.
Selects the telephone line type setting for the machine.
Confirming the Telephone Line Connection
This setting may not be available depending on the country or region of purchase.
Sets whether to print the Activity report automatically after every 20 transactions.
This machine is set to send/receive faxes in Error Correction Mode (ECM) by default.
Transmission/Reception of Faxes Using ECM
When the recipient's fax machine is compatible with ECM, the machine resends the fax after correcting errors automatically. When the recipient's fax machine is not compatible with ECM, the fax will be sent/received in the standard mode.
ECM transmission can be disabled.
Sets the length of time paused for each press of the Redial/Pause button.
Enables/disables automatic redialing.
Resending Faxes (Redialing a Busy Number)
If you select ON, you can specify the maximum number of redial attempts and the length of time the machine waits between redial attempts.
Selects the fax transmission speed.
Activity Report · Transmission settings

When faxing color documents using the ADF, selects whether to scan it in black & white if the recipient's fax machine does not support color faxing.
Enables/disables automatic printing of a transmission report after a fax transmission.
If you select Print error only or Print for each TX, you can enable/disable printing of the first page of the fax under the report.
Avoids mistransmission when reception and transmission occur at the same time.
If you select ON, the machine transmits the fax after confirming the dial tone.
This setting may not be supported depending on the country or region of purchase.
If you select ON, you can set the machine to send faxes after using the Numeric buttons to dial the number twice. By using this setting, you can avoid the mistransmission of faxes.
If you select ON, the machine checks whether the recipient's fax machine information matches the dialed number. If it matches the number, the machine starts to send faxes.
ECM RX
This machine is set to send/receive faxes in Error Correction Mode (ECM) by default.
Transmission/Reception of Faxes Using ECM
When the sender's fax machine is compatible with ECM, it resends the fax after correcting errors automatically. When the sender's fax machine is not compatible with ECM, the fax will be sent/received in the standard mode.
ECM reception can be disabled.
Specifies the detailed settings when Receive mode set. is set to Fax priority mode.
Specifies the length of time, in seconds, to allow the machine to judge whether an incoming call is a fax or a voice call.
Specifies the length of time, in seconds, that the machine rings for a voice call.
Sets whether to receive the fax after the specified ring time has elapsed.
DRPD: Fax ring pat.
Sets the distinctive ring pattern of a call that the machine assumes is a fax call. If you subscribe to a DRPD service, set the ring pattern to match the pattern assigned by your telephone company. You can select the ring pattern from Normal ring, Double ring, Short-short-long, Short-long- short, and Other ring type.
Setting the Receive Mode This setting is available only in the US and Canada.
Specifies the number of times the external device rings when the receive mode is set to Fax only mode or Fax priority mode.
Setting the Receive Mode
Sets whether to automatically receive faxes after the external device rang a specified length of time when Receive mode set. is set to TEL priority mode.

If you select ON, you can specify the length of time until automatic reception is started.
Enables/disables remote reception.
If you select ON, you can specify the remote reception ID.
Enables/disables automatic reduction of incoming faxes so that they fit in the selected paper.
If you select ON, you can select the image reduction direction.
Selects the fax reception speed.
Sets whether to print a reception report after each reception.
If you select ON, the machine rejects the reception of faxes with no sender information or faxes from specific senders.
No sender info.* Rejects faxes with no caller identification. Coded dial unset* Rejects faxes from senders not registered to coded speed dial codes. * This setting may not be supported depending on the country or region of purchase. Rejected numbers Rejects faxes from senders registered in the machine as rejected numbers.
If you subscribe to the Caller ID service, the machine detects the sender's Caller ID. If the sender's ID does not match the conditions specified in this setting, the machine rejects the phone call or fax reception from the sender.
If you select Subscribed in Caller ID service, you can specify the following settings:
Anonymous number Selects whether to reject a phone call or fax reception from a sender with no caller identification. Out of area Selects whether to reject a phone call or fax reception out of the subscribed service area. Rejected numbers Selects whether to reject a phone call or fax reception from the numbers registered to Rejected numbers in Fax reception reject. If you select Reject for Rejected numbers, Register rejected no.? is displayed on the LCD. Select Yes to register a fax/telephone number to reject. For details, see Rejecting Fax Reception.
This setting may not be supported depending on the country or region of purchase. Contact your telephone company to confirm whether it provides this service.

Advanced Guide > Changing the Machine Settings > Changing the Machine Settings on the LCD > Print settings
Use this setting only if the print surface becomes smudged.
Important
Be sure to set this back to OFF after printing since it may result in lower printing speed or lower print quality.
Extended copy amt.
Selects the amount of image that extends off the paper when printing in Borderless (full).
If printouts contain margins even though you are printing in Borderless, specifying Amount: Large for this setting may help solve the problem.

Advanced Guide > Changing the Machine Settings > Changing the Machine Settings on the LCD > Advanced settings
Selects the volume.
Keypad volume Selects the beep volume when pressing the buttons on the Operation Panel. OFF/Quiet/Standard/Loud Alarm volume Selects the alarm volume. OFF/Quiet/Standard/Loud
Selects the country where you are using the machine.
This setting may not be available depending on the country or region of purchase.
Changes the language for LCD messages and menus.
Japanese / English / German / French / Italian / Spanish / Dutch / Portuguese / Norwegian / Swedish / Danish / Finnish / Russian / Czech / Hungarian / Polish / Slovene / Turkish / Greek / Traditional Chinese / Simplified Chinese / Korean
Enables this function on the machine if you want to reduce the operating noise, such as when printing at night.
Enabling this function reduces the noises generated in the following cases:
Copying Printing from a PictBridge compliant device Printing from a wireless communication device Receiving the fax Sending the fax Printing a template form
Operating speed may be reduced compared to when this setting is set to OFF. This function may not be so effective depending on the machine's setting. Furthermore, certain noise, such as when the machine is preparing for printing, is not reduced.
The noises generated while scanning or printing from the computer can also be reduced. To reduce these noises, you need to configure the settings on the computer. For the noises while scanning, refer to Scanner Tab. For the noises while printing from the computer, refer to Reducing the Machine Noise.
Enables/Disables continuous input by pressing and holding down the
button when setting the number of copies, the zoom ratio, etc.
Selecting ON is useful, since you do not have to press a button repeatedly.
or

Advanced Guide > Changing the Machine Settings > Changing the Machine Settings on the LCD > Mobile phone settings
When printing from a mobile phone through Bluetooth communication, select the page size, media type, layout, and so on. For details on how to print from a mobile phone through Bluetooth communication, see Printing Photographs from a Wireless Communication Device .
Mobile phone settings is displayed only when the optional Bluetooth Unit is attached.
Select the page size for printing photos saved on a mobile phone.
Select the media type for printing photos saved on a mobile phone.
Select ON to correct and smooth out the jagged contours when printing.
Select the layout of the photos according to the paper for printing.
Borderless/Bordered/Borderless x2/Bordered x2/ Borderless x4/Bordered x4/Borderless x8/Bordered x8/ Mixed 1/Mixed 2/Mixed 3
Mixed 1, Mixed 2, or Mixed 3 can be selected only when the page size is set to A4 or 8.5"x11"(LTR).

Advanced Guide > Changing the Machine Settings > Changing the Machine Settings on the LCD > Bluetooth settings
You can change the device name of the machine, passkey, and so on in the Bluetooth settings. For details on how to print from a mobile phone through Bluetooth communication, see Printing Photographs from a Wireless Communication Device . For details on how to print from a computer through Bluetooth communication, refer to About Bluetooth Communication.
Bluetooth settings is displayed only when the optional Bluetooth Unit is attached.
Specifies the name of this machine that is displayed on a Bluetooth-compatible device.
For example, if you set it to XXX-2, the machine will be displayed as "Canon XXX-2" on the Bluetooth device. The default value is XXX-1 (where "XXX" is your machine's name).
Selecting ON will disable searching of this machine by a Bluetooth-compatible device.
When you select Enable, the passkey set on the Passkey screen becomes effective. Setting the passkey prevents unwanted access from other Bluetooth devices. You can choose either of the security modes below.
Mode 3 (recommended) This mode is activated on link level enforced security. The passkey will be required when a Bluetooth device communicates with the machine. Normally select this mode. Mode 2 This mode is activated on service level enforced security. The passkey will be required when printing through Bluetooth communication. After setting the security mode, we recommend making a trial print through Bluetooth communication. If printing does not start, change the security mode and try again.
Changes the passkey. The passkey is a four-digit number used to prevent unwanted access from other Bluetooth devices.
The initial value is "0000".
After you change the passkey, you may be required to input the new passkey on a Bluetooth device, even though it had previous access to the machine. In this case, enter the new passkey on the device.

Advanced Guide > Changing the Machine Settings > Changing the Machine Settings on the LCD > PictBridge settings
You can change the print settings when printing from a PictBridge compliant device. Set the print settings to Default on the PictBridge compliant device when you want to print according to the settings on the machine. See Settings on a PictBridge Compliant Device to change print settings from the PictBridge compliant device.
Select the page size when printing directly from a PictBridge compliant device.
When you perform PictBridge settings from the machine, set Paper size to Default on the PictBridge compliant device.
Select the media type when printing directly from a PictBridge compliant device.
When you perform PictBridge settings from the machine, set Paper type to Default on the PictBridge compliant device.
Select the print quality when printing directly from a PictBridge compliant device.
Select bordered or borderless print.
When you perform PictBridge settings from the machine, set Layout to Default on the PictBridge compliant device.
When Set is selected, the setting items below can be specified.
Photo optimizer Automatically optimizes the brightness and tone of a photo. Face brightener Brightens a darkened face on a photo taken against the light. Red-Eye corr. Corrects red eyes in portraits caused by flash photography.

Advanced Guide > Changing the Machine Settings > Changing the Machine Settings on the LCD > Reset setting
Reverts all settings you made to the machine back to default. However, some data may not be changed, depending on the current usage state of your machine.
Reverts the telephone number settings to default.
Reverts the machine settings other than the telephone number settings to default.
Reverts both the telephone number and machine settings to default.

Advanced Guide > Changing the Machine Settings > Changing Machine Settings from Your Computer
Changing the Print Options
Registering a Frequently Used Printing Profile
Setting the Ink Cartridge
Managing the Machine Power
Reducing the Machine Noise
Changing the Machine Operation Mode

Advanced Guide > Changing the Machine Settings > Changing Machine Settings from Your Computer > Changing the Print Options
You change detailed print driver settings for print data that is sent from an application software.
Specify this option if you encounter print failures such as part of an image data being cut off.
The procedure for changing the print options is as follows:
2. Click Print Options... on the Page Setup tab

The Print Options dialog box opens.

If necessary, change the setting of each item, and then click OK.
The Page Setup tab is displayed again.

Advanced Guide > Changing the Machine Settings > Changing Machine Settings from Your Computer > Registering a Frequently Used Printing Profile
You can register the frequently used printing profile to Commonly Used Settings on the Quick Setup tab. Unnecessary printing profiles can be deleted at any time.
The procedure for registering a printing profile is as follows:
1. Open the printer driver setup window
2. Set the necessary items
From Commonly Used Settings on the Quick Setup tab, select the printing profile to be used and change the settings after Additional Features, as necessary. You can also set necessary items on the Main, Page Setup, and Effects tab.

The Save Commonly Used Settings dialog box opens.


Set Name, then click OK. Set the items in Options..., as necessary. The printing profile is saved, and the Quick Setup tab is displayed again. The name and icon are added to the Commonly Used Settings list.
If you install the printer driver again or upgrade the version of the printer driver, the print settings you registered will be deleted from Commonly Used Settings.

Registered print settings cannot be saved and preserved. In this case, register the print settings again.
1. Select the printing profile to be deleted
Select the printing profile you want to delete from the Commonly Used Settings list on the Quick Setup tab.
Click Delete. When the confirmation message appears, click OK. The selected printing profile is deleted from the Commonly Used Settings list.
Printing profiles that are registered in the initial settings cannot be deleted.

Advanced Guide > Changing the Machine Settings > Changing Machine Settings from Your Computer > Setting the Ink Cartridge
When printing, you can specify the ink cartridge you use. If one of the ink cartridges becomes empty, you can continue printing by specifying the ink cartridge that still has ink.
The procedure for specifying the ink cartridge is as follows:
1. Open the printer driver setup window
2. Click Ink Cartridge Settings on the Maintenance tab
The Ink Cartridge Settings dialog box appears.
Select the ink cartridge to be used for printing and click OK. The specified ink cartridge will be used from the next printing.
When a media type other than Plain Paper, Hagaki, or Envelope is selected for Media Type on the Main tab, Black Only does not function. The machine also uses the color ink cartridge to print documents. Canon recommends that you use the ink cartridges installed in the machine and not remove them until the ink runs out.

Advanced Guide > Changing the Machine Settings > Changing Machine Settings from Your Computer > Managing the Machine Power
This function allows you to manage the machine power from the printer driver.
The procedure for managing the printer power is as follows:
The Power Off function turns off the machine. If you use this function, you will not be able to turn the machine on from the printer driver.
2. Execute power off
Click Power Off on the Maintenance tab. When the confirmation message appears, click OK.
The machine power switches off, and the Maintenance tab is displayed again.
You cannot receive faxes if the printer/machine is switched off.

Advanced Guide > Changing the Machine Settings > Changing Machine Settings from Your Computer > Reducing the Machine Noise
This function allows you to reduce the operating noise of the machine. Select if you wish to reduce the operating noise of the printer at night, etc. Using this function may lower the print speed.
The procedure for changing the quiet mode settings is as follows:
1. Open the printer driver setup window
2. Click Quiet Mode on the Maintenance tab
The Quiet Mode dialog box opens.
If necessary, specify one of the following items:
Do not use quiet mode The operating noise of the machine is at normal volume.
Always use quiet mode Select this option when you wish to reduce the operating noise of the machine.
Use quiet mode within specified time The operating noise of the machine can be reduced during a specified period of time. Set the Start time and End time when you wish the quiet mode to be activated.
The time specified in Start time and in End time must be different.
Make sure that the machine is on and click Send. Click OK when the confirmation message appears.
The selected settings are enabled hereafter.
Depending on print quality settings, effects of the quiet mode may be less.

Advanced Guide > Changing the Machine Settings > Changing Machine Settings from Your Computer > Changing the Machine Operation Mode
This function allows you to change the machine settings, as necessary.
The procedure for configuring Custom Settings is as follows:
1. Open the printer driver setup window
The Custom Settings dialog box opens.
If the machine is off or bi-directional communication is disabled, a message may appear because the computer cannot collect the machine status. If this happens, click OK to display the most recent settings specified on your computer.
Prevent paper abrasion The printer can increase the gap between the print head and the paper during high-density printing to prevent paper abrasion. Check this check box to use this function.
Ink Drying Wait Time You can set the length of the machine rest time until printing of the next page begins. Moving the slider to the right increases the pause time and moving the slider to the left decreases the time. If the paper gets stained because the next page is ejected before the ink on the printed page dries, increase the ink drying wait time. Reducing the ink drying wait time speeds up printing.
Click Send, and click OK when the confirmation message appears.
After that, the machine operates with the modified settings.

Advanced Guide > Troubleshooting
If an Error Occurs
The Machine Cannot Be Powered On
An Error Message Is Displayed on the LCD
A Message for Faxing Is Displayed on the LCD
LCD Cannot Be Seen At All
An Unintended Language Is Displayed on the LCD
Cannot Install the MP Drivers
Cannot Connect to Computer Properly
Print Results Not Satisfactory
Printing Does Not Start
Copying/Printing Stops Before It Is Completed
Machine Moves But Ink Is Not Ejected
Printing Speed Is Not as Fast as Expected
FINE Cartridge Holder Does Not Move to the Position for Replacing
Paper Does Not Feed Properly
Document Jams in the ADF
Message Appears on the Computer Screen
Error Message Appears on a PictBridge Compliant Device
Cannot Print Properly from a Wireless Communication Device
MP Navigator EX Problems
If You Cannot Resolve the Problem
Instructions for Use (Printer Driver)
General Notes (Scanner Driver)
General Notes (Fax Driver)

Advanced Guide > Troubleshooting > If an Error Occurs
When an error occurs in printing such as the machine is out of paper or paper is jammed, a troubleshooting message is displayed automatically. Take the appropriate action described in the message. The message may vary depending on the version of your operating system.




Advanced Guide > Troubleshooting > The Machine Cannot Be Powered On
Check 1: Press the ON button.
Power Cord Connector of the machine, then turn it back on.
machine back in and turn the machine back on after leaving it for at
least 5 minutes. If the problem is not resolved, contact the service center.

Page 704 of 817 pages An Error Message Is Displayed on the LCD
Advanced Guide > Troubleshooting > An Error Message Is Displayed on the LCD
If an error message is displayed on the LCD, take the corresponding action described below.
The FINE Cartridge may not be installed properly, or the Cartridge may not be compatible with this machine. Open the Scanning Unit (Cover) and install the appropriate FINE Cartridge. If the error is not resolved, the FINE Cartridge may be damaged. Contact the service center.
Make sure that each FINE Cartridge is installed in the correct position.
The FINE Cartridge may not be compatible with this machine. Install the FINE Cartridge compatible with this machine.
The FINE Cartridge may not be installed properly. Open the Scanning Unit (Cover) and install the appropriate FINE Cartridge. If the error is not resolved, the FINE Cartridge may be damaged. Contact the service center.
Ink may have run out. The function for detecting the remaining ink level will be disabled since the ink level cannot be correctly detected. If you want to continue printing without this function, press the Stop button for at least 5 seconds. Canon recommends to use new genuine Canon cartridges in order to obtain optimum qualities. Please be advised that Canon shall not be liable for any malfunction or trouble caused by continuation of printing under the ink out condition.
If the function for detecting the remaining ink level is
is displayed on the LCD.
Routine Maintenance Since printing in this condition may cause the contents of the fax to be lost, the machine stores received faxes in memory without printing until the FINE Cartridge is replaced. Print the fax stored in memory manually after replacing the FINE Cartridge. You can set the machine to print received faxes forcibly without storing them in memory, but a part of contents or all contents of the fax may not be printed.
Ink has run out. Replace the ink cartridge and close the Scanning Unit (Cover). If printing is in progress and you want to continue printing, press the Stop button for at least 5 seconds with the ink cartridge installed. Then printing can continue under the ink out condition. The function for detecting the remaining ink level will be disabled. Replace the empty ink cartridge immediately after the printing. The resulting print quality is not satisfactory, if printing is continued under the ink out condition.

Page 705 of 817 pages An Error Message Is Displayed on the LCD
If the function for detecting the remaining ink level is
is displayed on the LCD.
Routine Maintenance Since printing in this condition may cause the contents of the fax to be lost, the machine stores received faxes in memory without printing until the FINE Cartridge is replaced. Print the fax stored in memory manually after replacing the FINE Cartridge. You can set the machine to print received faxes forcibly without storing them in memory, but a part of contents or all contents of the fax may not be printed.
Contact service center The ink absorber is almost full. Press the machine's OK button to continue printing. Contact the service center.
5B00 Printer error has occurred
The machine error has occurred. Contact the service center.
Timeout error Press [OK]
Some errors occurred while copying and a certain time passed. Press the OK button to dismiss the error, and try to copy again.
Incompatible device Disconnect the cable from direct print port
Check the device connected to the Direct Print Port. Printing photos directly is possible with a PictBridge compliant device or the optional Bluetooth Unit BU-30. A communication time out occurs if an operation takes too long or if it takes too much time to send data. This may cancel printing. In such cases, disconnect and reconnect the USB cable. When printing from a PictBridge compliant device, depending on the model or brand of your device, you may have to select a PictBridge compliant print mode on the device before connecting it to the machine. You may also have to turn on your device or select Play mode manually after connecting the device to the machine. Perform necessary operations before connecting your device referring to its instruction manual. If the error is still not resolved, check if you can print another photograph.
Unsupported USB hub Remove hub
If a PictBridge compliant device is connected via a USB hub, remove the hub and connect it directly to the machine.
B200 Printer error has occurred Contact service center
Turn off the machine, and unplug the power cord of the machine from the power supply.
Contact the service center.
If you disconnect the power plug, all the documents stored in memory are deleted.
**** Printer error has occurred
"****" is displayed in the alphanumeric character and depends on the error occurred.
5100 is displayed: Cancel printing, turn off the machine. Then clear the jammed paper or protective material that is preventing the FINE Cartridge Holder from moving, and turn on the machine again.
Be careful not to touch the components inside the machine. The machine may not print out properly if you touch it. If the problem is not resolved, contact the service
disabled,

Page 706 of 817 pages An Error Message Is Displayed on the LCD
center.
In other cases: Turn off the machine, and unplug the power cord of the machine from the power supply. Plug the machine back in and turn the machine back on. If the problem is not resolved, contact the service center.
Load paper Load paper and press [OK]
Reload the paper correctly and press the OK button.
When sending faxes before printing out received data, press the Stop button to resolve the error. After you press the Stop button to resolve the error, ensure to press the FAX button in order to print out data remained in memory.
Document in ADF Press [OK]
The document is jammed in the ADF. Remove the document page jammed in the ADF, then press the OK button. Operate again after resolving the error.
Document Jams in the ADF
Failed to scan document Press [OK]
No document in the ADF. Press the OK button to resolve the error, then operate again after loading documents.
Close the feeder cover [OK] ->Eject the document
Documents remain in the ADF. Press the OK button to eject documents and press the Stop button to stop ejecting. To continue scanning, operate on the application. The scanning from the ADF may not be supported depending on your application software. For details, refer to the instruction manual of your application.
Document too long Press [OK]
The document is too long or is jammed in the ADF. Remove the document page jammed in the ADF, then press the OK button. After resolving the error, make sure that the document you are loading meets the machine's requirements before redoing the operation.
Document Jams in the ADF
Open the paper output tray [OK] ->Continue printing
Open the Paper Output Tray, then OK button.
Cover is open You opened the Scanning Unit (Cover) during an operation. Return the Scanning Unit (Cover) to its original position.
Paper jammed Clear paper jam and press [OK]
If paper has jammed in the machine, clear the jam, reload the paper in the machine correctly and then press the OK button.

Page 707 of 817 pages A Message for Faxing Is Displayed on the LCD
Advanced Guide > Troubleshooting > A Message for Faxing Is Displayed on the LCD
Auto redial The machine is waiting to redial the recipient's number because the line was busy or the recipient did not answer when you tried to send a document. Wait for the machine to automatically redial the number. If you want to cancel automatic redialing, wait until the machine starts dialing the number, then press the Stop button. You can also delete the document from memory to cancel automatic redialing.
Resending Faxes (Redialing a Busy Number)
Hang up phone The handset is not placed in the handset cradle correctly. Replace the handset correctly.
Try again in B&W The recipient's fax machine is not color-compatible. Press the Black button to resend the fax. Alternatively, you can set Color transmission to If incompatible, B&W.
No tone detected The telephone line cable with a modular plug may not be plugged in properly. Make sure that the cable is plugged in properly, and resend the fax after a while. If you still cannot send the fax, set Dial tone detect to OFF.
Received in memory If the machine receives a fax under one of the following conditions, the machine will not be able to print the received fax and will store it in its memory. When the problem is resolved as described, the fax stored in memory is printed automatically.
Ink has run out: Replace the FINE Cartridge.
You can set the machine to forcibly print a received fax even if the ink has run out. However, part or all of the fax may not be printed since the ink has run out. Also, the contents of the fax will not be stored in memory. In addition, if the ink has already run out, we recommend that OFF be selected for Auto print in User settings to store the received fax in memory and print the fax manually after replacing the FINE Cartridge.
Document Stored in Memory
Paper has run out: Load the paper and press the OK button. A different size of paper from that specified by Page size is loaded: Load the same size of paper as that specified by Page size, then press the OK button. Page size is set to other than A4, 8.5"x11"(LTR), or Legal (or 8.5"x14"): Set Page size to A4, 8.5"x11"(LTR), or Legal (or 8.5"x14"). Media type is set to other than Plain paper: Set Media type to Plain paper. You pressed the Stop button to cancel printing of a fax: Press the FAX button.

Page 708 of 817 pages A Message for Faxing Is Displayed on the LCD
To print the received faxes automatically, select ON for Auto print in User settings. For details, see Auto print. When OFF is selected for Auto print in User settings, print the faxes stored in memory from the Memory reference screen. For details, see Printing a Document in Memory. If you did not print the fax stored in memory (e.g., if you did not resolve the problem by pressing the Stop button), you can delete or print the fax stored in memory later. For details, see Document Stored in Memory .
Busy/no signal The telephone number you dialed is busy. Try dialing again after waiting for a moment.
Resending Faxes (Redialing a Busy Number) The fax number dialed is incorrect. Check the fax number and dial again. The recipient's fax machine did not respond (after all automatic redialing attempts). Contact the recipient and have the recipient check the fax machine. For an overseas call, add pauses to the registered number. The recipient is not using a G3 machine. The machine cannot send or receive documents to/from a fax machine that is incompatible with the G3 standard. Contact the recipient and ask the recipient to check whether the fax machine is G3 compatible. The touch tone/rotary pulse setting on the machine is incorrect. Set the machine to match the telephone line you are using.
Confirming the Telephone Line Connection
Memory is full The machine's memory is full because it has sent/ received too many documents, or a detailed document.
When sending a fax, divide it to resend. When receiving a fax, print or delete documents in the machine's memory, then ask the sender to resend the fax.
Document Stored in Memory
Check page size Paper other than A4, Letter-, or Legal-sized* paper is loaded. Load A4, Letter-, or Legal-sized paper. * Legal may not be available depending on the country or region of purchase.
Change the paper A4/LTR/Legal Plain paper
The page size setting is set to a size other than A4, Letter-, or Legal-size. Set Page size to A4, 8.5"x11"(LTR), or Legal (or 8.5"x14") and Media type to Plain paper to print received faxes. * Legal may not be available depending on the country or region of purchase.
Fax info does not match Transmission has been canceled because the machine could not detect the recipient's fax machine information or the information did not match the dialed number. This message is displayed when Check RX fax info is set to ON. For details, see Sending Faxes after Checking Information (Checking the Recipient's Information) .
Reception rejected Reception has been rejected because the fax matches the fax rejection condition specified by Fax reception reject. For details, see Rejecting Fax Reception.

Advanced Guide > Troubleshooting > LCD Cannot Be Seen At All
The machine is not powered on. Connect the power cord and press the ON button.
The LCD may be in the screen-saver mode. On the Operation Panel, press a button other than the ON button.

Page 710 of 817 pages An Unintended Language Is Displayed on the LCD
Advanced Guide > Troubleshooting > An Unintended Language Is Displayed on the LCD
Select the language you want to be displayed according to the following procedure.
button at once, then press the OK button.
button repeatedly to select the rightmost menu.
button twice, then press the OK button.
button repeatedly to select the leftmost menu.
button the number of times in the following table according to your desired language.
- JAPANESE: 0 time - ENGLISH: 1 time - GERMAN: 2 times - FRENCH: 3 times - ITALIAN: 4 times - SPANISH: 5 times - DUTCH: 6 times - PORTUGUESE: 7 times - NORWEGIAN: 8 times - SWEDISH: 9 times - DANISH: 10 times - FINNISH: 11 times - RUSSIAN: 12 times - CZECH: 13 times - HUNGARIAN: 14 times - POLISH: 15 times - SLOVENE: 16 times - TURKISH: 17 times - GREEK: 18 times - SIMPLIFIED CHINESE: 19 times - TRADITIONAL CHINESE: 20 times - KOREAN: 21 times
The desired language is displayed on the LCD.

Advanced Guide > Troubleshooting > Cannot Install the MP Drivers
If the installation does not start even after the Setup CD-ROM is inserted
Start the installation following the procedure below.
In Windows XP, click Start then My Computer.
In Windows 2000, double-click the
My Computer icon on the desktop.
CD-ROM icon on the displayed window.
If the contents of the CD-ROM are displayed, double-click MSETUP4.EXE.
CD-ROM icon on your desktop to start installation.
If the CD-ROM icon is not displayed, try the following:
Remove the CD-ROM from your computer, then insert it again. Restart your computer. If the icon is still not displayed, try different discs and see if they are displayed. If other discs are displayed, there is a problem with the Setup CD-ROM. In this case, contact the service center.

If you are unable to proceed beyond the Printer Connection screen, make sure that the USB cable is securely plugged into the USB port of the machine and is connected to the computer, and then follow the procedure below to reinstall the MP Drivers.
Double-click the

In Windows Vista, The printer is not detected. Check the connection. may be displayed depending on the computer you use. In this case, wait for a while. If you still cannot proceed to the next step, follow the procedure below to reinstall the MP Drivers.
Follow the procedure described in your setup manual to reinstall the MP Drivers.
If the MP Drivers were not installed correctly, uninstall the MP Drivers, restart your computer, and then reinstall the MP Drivers.
Uninstalling the MP Drivers
If you reinstall the MP Drivers, select Custom Install on the Setup CD-ROM.
If the installer was forced to be terminated due to a Windows error, the system may be in an unstable condition and you may not be able to install the drivers. Restart your computer before reinstalling.

Advanced Guide > Troubleshooting > Cannot Connect to Computer Properly
"This device can perform faster" Message Is Displayed
If your system environment is not fully compatible with Hi-Speed USB, the machine will operate at a lower speed provided under USB 1.1. In this case, the machine operates properly but printing speed may slow down due to communication speed.
Check: Check the following to make sure that your system environment supports Hi-Speed USB connection.
Does the USB port on your computer support Hi-Speed USB connection? Do the USB cable, and the USB hub if you are using one, support Hi-Speed USB connection? Be sure to use a certified Hi-Speed USB cable. We recommend that the cable is no longer than around 10 feet / 3 meters. Does the operating system of your computer support Hi-Speed USB connection? Obtain and install the latest update for your computer. Does the Hi-Speed USB driver operate properly? Obtain the latest version of the Hi-Speed USB driver compatible with your hardware and reinstall it on your computer.
For details on Hi-Speed USB of your system environment, contact the manufacturer of your computer, USB cable, or USB hub.

Advanced Guide > Troubleshooting > Print Results Not Satisfactory
If the print result is not satisfactory due to white streaks, misaligned lines, or uneven colors, confirm the paper and print quality settings first.
type of the loaded paper? When these settings are incorrect, you cannot obtain a proper print result.
If you are printing a photograph or an illustration, incorrect paper type settings may reduce the quality of the printout color.
Also, if you print with an incorrect paper type setting, the printed surface may be scratched.
In borderless printing, uneven coloring may occur depending on the combination of the paper type setting and the loaded paper.
The method of confirming the paper and print quality settings differs depending on what you do with your machine.
To copy by operating the machine Confirm by using the Operation Panel on the machine.
To print from a PictBridge compliant device Confirm by using your PictBridge compliant device.
Printing Photographs Directly from a Compliant Device Confirm by using the Operation Panel on the machine.
Changing the Machine Settings on the LCD
To print from a wireless communication device
Confirm by using the Operation Panel on the machine.
Changing the Machine Settings on the LCD
To print from a computer Confirm by using the printer driver.
Printing with Easy Setup
according to the media type and printing data referring to the table in
Check 1. Select a print quality option suitable for the paper and image for printing. If you notice blurs or uneven colors, increase the print quality setting and try printing again.
When printing from a PictBridge compliant device, set the print quality setting by using the Operation Panel on the machine. You cannot make this setting from a PictBridge compliant device. You cannot change the print quality setting when printing from a wireless communication device.
Check 3: If the problem is not resolved, there may be other causes.
See also the sections below:
Cannot Print to End of Job
No Printing Results/Printing Is Blurred/Colors Are Wrong/White Streaks
Printed Paper Curls or Has Ink Blots
Paper Is Smudged/Printed Surface Is Scratched
Back of the Paper Is Smudged
Vertical Lines Are Printed on the Sides of the Printout
Setting Items · Colors Are Unclear · Lines Are Misaligned

Colors Are Uneven or Streaked

Advanced Guide > Troubleshooting > Print Results Not Satisfactory > Cannot Print to End of Job
Click Print Options on the Page Setup sheet. Then, select the Prevent loss of print data check box in the displayed dialog.
Delete unnecessary files to free disk space.

Page 717 of 817 pages No Printing Results/Printing Is Blurred/Colors Are Wrong/White Streaks
Advanced Guide > Troubleshooting > Print Results Not Satisfactory > No Printing Results/Printing Is Blurred/Colors Are Wrong/White Streaks

Print Results Not Satisfactory

Page 718 of 817 pages No Printing Results/Printing Is Blurred/Colors Are Wrong/White Streaks
If the Ink Cartridge Locking Cover is not closed securely, ink may not be ejected correctly.
Open the Scanning Unit (Cover), open the Ink Cartridge Locking Cover, then close the Ink Cartridge Locking Cover.
When you close the Ink Cartridge Locking Cover, push the Ink Cartridge Locking Cover until it clicks into place.

maintenance operations such as Print Head Cleaning. Print the Nozzle Check Pattern to determine whether the ink ejects properly from the print head nozzles.
Refer to Routine Maintenance for the Nozzle Check Pattern printing, Print Head Cleaning, and Print Head Deep Cleaning.
If the Nozzle Check Pattern is not printed correctly: After performing the Print Head Cleaning, print the Nozzle Check Pattern and examine the pattern. If the problem is not resolved after performing the Print Head Cleaning twice: Perform the Print Head Deep Cleaning. If the problem is not resolved after performing the Print Head Deep Cleaning, turn off the machine and perform another Print Head Deep Cleaning after 24 hours. When you turn the machine off, do not unplug it from the power supply. If the problem is not resolved after performing the Print Head Deep Cleaning twice: Ink may have run out. Replace the FINE Cartridge.
one.
the paper is loaded with the printable side facing up. Printing on the wrong side of such paper may cause unclear prints or prints with reduced quality.
Refer to the paper's instruction manual for detailed information on the printable side.
Clean the Platen Glass.
Cleaning the Platen Glass and Document Cover
or in the ADF.
Loading Paper / Originals
up? When loading the original on the Platen Glass, the side to be copied should be face down. When loading the original in the ADF, the side to be copied should be face up.

Page 719 of 817 pages No Printing Results/Printing Is Blurred/Colors Are Wrong/White Streaks
Print from the digital camera directly, or reprint from the computer.
If you copy a printout done by this machine, print quality may be reduced.

Advanced Guide > Troubleshooting > Print Results Not Satisfactory > Colors Are Unclear
Check 1: Enable color correction.
When printing photographs or other graphics, enabling color correction in the printer driver may improve color.
Select Vivid Photo in the Effects sheet in the printer properties dialog box.
Select Color Options in the pop-up menu in the Print dialog box, and then select Vivid Photo on the Color Mode. In Mac OS X v 10.4.x or Mac OS X v 10.3.9, select Special Effects in the Print dialog box, and then select Vivid Photo.
If the Ink Cartridge Locking Cover is not closed securely, ink may not be ejected correctly.
Open the Scanning Unit (Cover), open the Ink Cartridge Locking Cover, then close the Ink Cartridge Locking Cover.
When you close the Ink Cartridge Locking Cover, push the Ink Cartridge Locking Cover until it clicks into place.
one.
Print the Nozzle Check Pattern to determine whether the ink ejects properly from the print head nozzles.
Refer to Routine Maintenance for the Nozzle Check Pattern printing, Print Head Cleaning, and Print Head Deep Cleaning.
If the Nozzle Check Pattern is not printed correctly: After performing the Print Head Cleaning, print the Nozzle Check Pattern and examine the pattern. If the problem is not resolved after performing the Print Head Cleaning twice: Perform the Print Head Deep Cleaning. If the problem is not resolved after performing the Print Head Deep Cleaning, turn off the machine and perform another Print Head Deep Cleaning after 24 hours. When you turn the machine off, do not unplug it from the power supply. If the problem is not resolved after performing the Print Head Deep Cleaning twice: Ink may have run out. Replace the FINE Cartridge.
Printed colors may not match screen colors due to basic differences in the methods used to produce colors. Color control settings and environmental differences can also affect how colors appear on the screen.


Advanced Guide > Troubleshooting > Print Results Not Satisfactory > Lines Are Misaligned

Print Results Not Satisfactory
Check 2: Perform Print Head Alignment.
If you did not align the Print Head after installation, straight lines may be printed misaligned.
Click Print Options on the Page Setup sheet. Then, select the Prevent loss of print data check box in the displayed dialog.
function used? When the Page Layout Printing or Binding margin function is being used, thin lines may not be printed. Try thickening the lines in the document.
Routine Maintenance

Advanced Guide > Troubleshooting > Print Results Not Satisfactory > Printed Paper Curls or Has Ink Blots

Print Results Not Satisfactory
printer driver and try printing again. If you are using plain paper to print images with high intensity, the paper may absorb too much ink and become wavy, causing paper abrasion.
When printing from your computer
When printing data with high color saturation such as photographs or images in deep color, we recommend using Photo Paper Plus Glossy II or other Canon speciality paper.
Loading Paper / Originals
Adjusting Intensity · When copying · Setting Items

Advanced Guide > Troubleshooting > Print Results Not Satisfactory > Paper Is Smudged/Printed Surface Is Scratched

Print Results Not Satisfactory
Check to see if the paper you are printing on is suitable for your printing purpose.
Loading Paper / Originals When performing Borderless Printing, make sure that the paper you are using is suitable for Borderless Printing. If the paper you are using is not suitable for Borderless Printing, the print quality may be reduced at the top and bottom edges of the paper.
Check 3: Load the paper after correcting its curl.
Turn the paper over and reload it to print on the other side.
Leaving the paper loaded on the Rear Tray for a long time may cause the paper to curl. In this case, load the paper with the other side facing up. It may resolve the problem.
We recommend putting unused paper back into the package and keeping it on a level surface.

Printing Area


We recommend printing curl-corrected paper one sheet at a time.
For Paper That Curls Inward When It Is Printed Depending on the media type, the paper may be smudged or may not be fed properly even if it is not curled inward. In such cases, follow the procedure described below to curl the paper outward before printing. This may improve the print result.

We recommend printing paper that has been curled outward one sheet at a time.
abrasion setting. Selecting the Prevent paper abrasion setting will widen the clearance between the Print Head and the loaded paper. If you notice abrasion even with the media type set correctly to match the loaded paper, set the machine to prevent paper abrasion by using the Operation Panel or the printer driver.
Print speed is reduced if you are selecting the Prevent paper abrasion setting.
* Deactivate the Prevent paper abrasion setting once printing is complete. If not, this setting remains enabled for all subsequent print jobs.
Press the Menu button repeatedly until Device settings appears, use the
button and OK button to select Print settings and Prevent abrasion in this order, then select ON.
Changing the Machine Settings on the LCD
Open the printer properties dialog box, and in Custom Settings in the Maintenance sheet, select the Prevent paper abrasion check box, and then click Send. To open the printer properties dialog box, see Opening the Printer Properties Dialog Box (Windows).
In the Canon IJ Printer Utility, select Custom Settings in the pop-up menu, select the Prevent paper abrasion check box, and then click Send. To open the Canon IJ Printer Utility, see Opening the Canon IJ Printer Utility (Macintosh) .
printer driver and try printing again. If you are using plain paper to print images with high intensity, the paper may absorb too much ink and become wavy, causing paper abrasion.

When printing from your computer Reduce the Intensity setting in the printer driver and try printing again.
Opening the Printer Properties Dialog Box (Windows)
Click Here: Printer Driver * Before clicking here to open the printer properties dialog box, quit the running application software.
Opening the Page Setup and Print Dialog Box (Macintosh)
If you are printing beyond the recommended printing area of your printing paper, the lower edge of the paper may become stained with ink.
Resize your original document in your application software.
Clean the Platen Glass.
Cleaning the Platen Glass and Document Cover
When performing duplex printing, the inside of the machine may become stained with ink, causing the printout to become smudged.
Perform the Bottom Plate Cleaning to clean the inside of the machine.
Cleaning the Inside of the Machine (Bottom Plate Cleaning)
To prevent the inside of the machine from stains, set the paper size correctly.
Check 9: Set Ink Drying Wait Time longer.
Doing so gives the printed surface enough time to dry so that paper smudged and scratched are prevented.
Opening the Printer Properties Dialog Box (Windows)
When copying · Setting Items · Printing Area

Opening the Canon IJ Printer Utility (Macintosh)
Depending on the media type, the paper may be scratched by other loaded paper when feeding from the Rear Tray. In this case, load one sheet at a time.

Advanced Guide > Troubleshooting > Print Results Not Satisfactory > Back of the Paper Is Smudged

Print Results Not Satisfactory
machine.
Cleaning the Inside of the Machine (Bottom Plate Cleaning)
When performing duplex printing or too much printing, the inside may become stained with ink.

Page 729 of 817 pages Vertical Lines Are Printed on the Sides of the Printout
Advanced Guide > Troubleshooting > Print Results Not Satisfactory > Vertical Lines Are Printed on the Sides of the Printout

Print Results Not Satisfactory
The margin may be smudged if the size of the loaded paper is larger than that specified in the printer driver.
Set the paper size correctly according to the paper you loaded.
Print Results Not Satisfactory
The direction of the vertical line pattern may vary depending on the image data or the print setting. This machine performs automatic cleaning when necessary to keep printouts clean. A small amount of ink is ejected for cleaning. Although ink is usually ejected on the ink absorber, it may be ejected on the paper if you load paper larger than that specified with the printer driver.

Advanced Guide > Troubleshooting > Print Results Not Satisfactory > Colors Are Uneven or Streaked

Print Results Not Satisfactory
maintenance operations such as Print Head Cleaning. Print the Nozzle Check Pattern to determine whether the ink ejects properly from the print head nozzles.
Refer to Routine Maintenance for the Nozzle Check Pattern printing, Print Head Cleaning, and Print Head Deep Cleaning.
If the Nozzle Check Pattern is not printed correctly: After performing the Print Head Cleaning, print the Nozzle Check Pattern and examine the pattern. If the problem is not resolved after performing the Print Head Cleaning twice: Perform the Print Head Deep Cleaning. If the problem is not resolved after performing the Print Head Deep Cleaning, turn off the machine and perform another Print Head Deep Cleaning after 24 hours. When you turn the machine off, do not unplug it from the power supply. If the problem is not resolved after performing the Print Head Deep Cleaning twice: Ink may have run out. Replace the FINE Cartridge.
Check 3: Perform Print Head Alignment.
Routine Maintenance

Advanced Guide > Troubleshooting > Printing Does Not Start
turn the machine on. While the Power lamp is flashing green, the machine is initializing. Wait until the Power lamp stops flashing and remains lit green.
When printing large data such as a photo or graphics, it may take longer to start printing. While the Power lamp is flashing green, the computer is processing data and sending it to the machine. Wait until printing starts.
If you are using a relay device such as a USB hub, disconnect it, connect the machine directly to the computer, and try printing again. If printing starts normally, there is a problem with the relay device. Consult the reseller of the relay device for details. There could also be a problem with the USB cable. Replace the USB cable and try printing again.
Check 3: Restart your computer if you are printing from the computer.
If there are any unnecessary print jobs, delete them.
Deleting the Undesired Print Job
dialog box. The machine will not print properly if you are using a driver for a different printer.
In Windows, make sure that your machine's name is selected in the Print dialog box.
In Macintosh, make sure that your machine's name is selected in Printer in the Print dialog box.
To make the machine the one selected by default, select Set as Default Printer (Windows), Default Printer or Make Default (Macintosh).
Check 5: Configure the printer port appropriately.
Configure "USBnnn" (where "n" is a number) as the printer port.
In Windows XP, click Control Panel, Printers and Other Hardware, then Printers and Faxes. In Windows 2000, click Control Panel then Printers.
Make sure that a port named USBnnn (where "n" is a number) with Canon XXX Printer appearing in the Printer column is selected for Print to the following port(s). If the setting is incorrect, reinstall the MP Drivers or change the printer port to the correct one.


Advanced Guide > Troubleshooting > Copying/Printing Stops Before It Is Completed
period? If the machine has been printing continuously for a long time, the Print Head may overheat. To protect the Print Head, the machine may stop printing at a line break for a period of time and then resume printing.
In this case, interrupt your print session at a convenient time and turn the machine off for at least 15 minutes.
Additionally, if the machine has been printing graphics or photos with intense colors continuously over a period of time, the machine may stop printing to protect the Print Head. In this case, printing will not resume automatically. Turn the machine off for at least 15 minutes.
The Print Head and the surrounding area can become extremely hot inside the machine. Never touch the Print Head or nearby components.
Make sure that paper is loaded in the Rear Tray.
If the machine has run out of paper, load paper.
illustrations? Printing large data such as photos or graphics takes time for the machine and the computer to process, during which the machine may appear to have stopped operating.
In addition, when printing data that uses a large amount of ink continuously on plain paper, the machine may pause temporarily. In either case, wait until the process is complete.
If you are printing a document with a large printing area or printing multiple copies of a document, printing may pause to allow the ink to dry.

Advanced Guide > Troubleshooting > Machine Moves But Ink Is Not Ejected
Print the Nozzle Check Pattern to determine whether the ink ejects properly from the print head nozzles.
Refer to Routine Maintenance for the Nozzle Check Pattern printing, Print Head Cleaning, and Print Head Deep Cleaning.
If the Nozzle Check Pattern is not printed correctly: After performing the Print Head Cleaning, print the Nozzle Check Pattern and examine the pattern. If the problem is not resolved after performing the Print Head Cleaning twice: Perform the Print Head Deep Cleaning. If the problem is not resolved after performing the Print Head Deep Cleaning, turn off the machine and perform another Print Head Deep Cleaning after 24 hours. When you turn the machine off, do not unplug it from the power supply. If the problem is not resolved after performing the Print Head Deep Cleaning twice: Ink may have run out. Replace the FINE Cartridge.
If the Ink Cartridge Locking Cover is not closed securely, ink may not be ejected correctly.
Open the Scanning Unit (Cover), open the Ink Cartridge Locking Cover, then close the Ink Cartridge Locking Cover.
When you close the Ink Cartridge Locking Cover, push the Ink Cartridge Locking Cover until it clicks into place.
one.

Page 735 of 817 pages Printing Speed Is Not as Fast as Expected
Advanced Guide > Troubleshooting > Printing Speed Is Not as Fast as Expected
Print speed is reduced if you specified to print in Quiet Mode in the printer driver or Operation Panel. For faster printing, do not print in Quiet Mode.
For information on the printer driver settings, refer to Reducing the Machine Noise.
For information to make setting on the Operation Panel, see Changing the Machine Settings on the LCD.
Increase the printing speed setting in the printer driver. Setting to prioritize speed makes printing faster.
Opening the Printer Properties Dialog Box (Windows)
Click Here: Printer Driver * Before clicking here to open the printer properties dialog box, quit the running application software.
Depending on the media type, the Fast option may not be available.
Opening the Page Setup and Print Dialog Box (Macintosh)
Depending on the media type, the Fast option may not be available.
Printing speed may not improve noticeably by following the instructions above, depending on your system environment.

Page 736 of 817 pages FINE Cartridge Holder Does Not Move to the Position for Replacing
Advanced Guide > Troubleshooting > FINE Cartridge Holder Does Not Move to the Position for Replacing
Check if the Power lamp is lit green.
The FINE Cartridge Holder will not move unless the power is on. If the Power lamp is off, close the Scanning Unit (Cover) and turn the machine on.
While the Power lamp is flashing green, the machine is initializing. Wait until the Power lamp stops flashing and remains lit green, and then open the Scanning Unit (Cover) again.
Close the Scanning Unit (Cover), follow the directions displayed in the error message to resolve the error, and then reopen it. For details on how to resolve the error, see An Error Message Is Displayed on the LCD.
longer? If the Scanning Unit (Cover) is left open for more than 10 minutes, the FINE Cartridge Holder moves to the right to prevent the Print Head from drying out. Close and reopen the Scanning Unit (Cover) to return the FINE Cartridge Holder to the left.
period? Close the Scanning Unit (Cover), wait a while, then reopen it.
If the machine has been printing continuously for a long time, the FINE cartridge Holder may not move to the center since the Print Head may overheat.
Opening the Scanning Unit (Cover) while printing moves the FINE Cartridge Holder to the right. Close the Scanning Unit (Cover), and reopen it after printing is complete.

Advanced Guide > Troubleshooting > Paper Does Not Feed Properly
Check 1: Make sure of the following when you load paper.
When loading two or more sheets of paper, align the edges of the sheets before loading. When loading two or more sheets of paper, make sure that the paper stack does not exceed the paper load limit. However, proper feeding of paper may not be possible at this maximum capacity depending on the type of paper or environmental conditions (either very high or low temperature and humidity). In such cases, reduce the sheets of paper you load at a time to less than half of the paper load limit. Always load the paper in portrait orientation, regardless of the printing orientation. When you load the paper on the Rear Tray, load the paper with the print side facing UP and slide the Paper Guides to align with the both side of the paper.
Loading Paper / Originals
Check 2: Check to see if the paper you are printing on is not too thick or
curled.
Loading Paper / Originals
Check 3: Make sure of the following when you load envelopes.
When printing on envelopes, refer to Loading Paper / Originals, and prepare the envelopes before printing. Once you have prepared the envelopes, load them in portrait orientation. If the envelopes are placed in landscape orientation, they will not feed properly.
Tray.

If the paper tears in the Rear Tray, see Paper Jams to remove it.
If you drop the foreign object into the Rear Tray, turn off the machine, then remove the foreign object.



Advanced Guide > Troubleshooting > Paper Jams
While the machine is receiving a fax (in memory), you cannot turn off the machine. Turn it off after receiving the fax. Do not disconnect the power plug while the machine is receiving a fax. If you disconnect the power plug, all the documents stored in memory are deleted.
If you need to turn off the machine to remove jammed paper during printing, press the Stop button to cancel print jobs before turning off the machine.
If the paper is jammed in the Paper Output Slot or the Rear Tray:
Remove the paper following the procedure below.

If the paper tears and a piece remains inside the machine, turn the machine off, open the Scanning Unit (Cover), and remove the paper. Be careful not to touch the components inside the machine. After removing all paper, close the Scanning Unit (Cover), and turn the machine back on. If you cannot pull the paper out, turn the machine off and turn it back on. The paper may be ejected automatically.
If you turned off the machine in step (1), all print jobs in the queue are canceled. Reprint if necessary.
When reloading the paper, confirm that you are using the correct paper and are loading it correctly.
Loading Paper / Originals A5 sized paper is suited to printing documents consisting mainly of text. We do not recommend using such paper to print documents with photos or graphics, since the printout may curl and cause paper exit jams.
If you cannot remove the paper or the paper tears inside the machine, or if the paper jam error continues after removing the paper, contact the service center.

Make sure of the following:
Check 2: Are there any foreign objects in the Rear Tray?
If you drop the foreign object into the Rear Tray, turn off the machine, then remove the foreign object.
Check 3: Load the paper after correcting its curl.

Advanced Guide > Troubleshooting > Document Jams in the ADF
While the machine is receiving a fax (in memory), you cannot turn off the machine. Turn it off after receiving the fax. Do not disconnect the power plug while the machine is receiving a fax. If you disconnect the power plug, all the documents stored in memory are deleted.
If the Stop button is pressed while the machine is scanning the document:
If you press the Stop button during scanning, Document in ADF Press OK appears on the LCD. Press the OK button so that the remaining document is automatically fed out.
Remove the document following the procedure below.


When rescanning the document after clearing the error, rescan it from the first page.
If you cannot remove the document or the document tears inside the machine, or if the document jam error continues after removing the document, contact the service center.

The document may not feed properly depending on the media type, or your environment, such as when the temperature and humidity are either too high or too low. In this case, reduce the number of document pages to approximately half of the loading capacity. If the document still jams, use the Platen Glass instead.
If the document is jammed in the Document Output Slot, open the Document Output Slot as shown in the figure below and pull out the document.

When rescanning the document after clearing the error, rescan it from the first page.
If you cannot remove the document or the document tears inside the machine, or if the document jam error continues after removing the document, contact the service center.

Advanced Guide > Troubleshooting > Message Appears on the Computer Screen
Error Number: B200 A printer error has occurred. Turn the printer off and unplug the power cord of the printer from the power supply. Then contact the service center. Is Displayed
Error Number: **** A printer error has occurred. Turn the printer off and then on again. If this doesn't clear the error, see the user's guide for more detail. Is Displayed
Writing Error/Output Error/Communication Error
The Inkjet Printer/Scanner/Fax Extended Survey Program Screen Is Displayed
The Inkjet Printer/Scanner/Fax Extended Survey Program Icon Appears
Error Number: B200 A printer error has occurred. Turn the printer off and unplug the power cord of the printer from the power supply. Then contact the service center. Is Displayed
Turn off the machine, and unplug the power cord of the machine from the power supply.
Contact the service center.
If you disconnect the power plug, all the documents stored in memory are deleted.
Error Number: **** A printer error has occurred. Turn the printer off and then on again. If this doesn't clear the error, see the user's guide for more detail. Is Displayed
"****" is displayed in the alphanumeric character and depends on the error occurred.
Confirm the movement of the FINE Cartridge Holder blocked.
Cancel printing from your computer, turn off the machine. Then clear the jammed paper or protective material that is preventing the FINE Cartridge Holder from moving, and turn on the machine again.
Be careful not to touch the components inside the machine. The machine may not print out properly if you touch it. If the problem is not resolved, contact the service center.
Four-digit alphanumeric and "Printer error has occurred." Is displayed.
Turn off the machine, and unplug the power cord of the machine from the power supply.
Turn the machine back on.
If the problem is not resolved, contact the service center.
Check 1: If the Power lamp is off, make sure that the power plug is plugged in,
Other Error Messages

then turn the machine on.
While the Power lamp is flashing green, the machine is initializing. Wait until the Power lamp stops flashing and remains lit green.
Check 2: Make sure that the printer port is configured appropriately in the MP Drivers.
* In the following instructions, "XXX" signifies your machine's name.
In Windows XP, click Control Panel, Printers and Other Hardware, then Printers and Faxes. In Windows 2000, click Control Panel then Printers.
Make sure that a port named USBnnn (where "n" is a number) with Canon XXX Printer appearing in the Printer column is selected for Print to the following port(s). If the port setting is not correct, reinstall the MP Drivers or change the port setting according to the interface you are using.
Check 3: Make sure that the USB cable is securely plugged in to the machine and the computer.
If you are using a relay device such as a USB hub, disconnect it, connect the machine directly to the computer, and try printing again. If printing starts normally, there is a problem with the relay device. Consult the reseller of the relay device for details. There could also be a problem with the USB cable. Replace the USB cable and try printing again.
Check 4: Make sure that the MP Drivers are installed correctly.
Uninstall the MP Drivers following the procedure described in Uninstalling the MP Drivers and reinstall them following the procedure described in your setup manual.
Check 5: Check the status of the device on your computer.
Follow the procedure below to check the status of the device.
If the User Account Control screen is displayed, follow the on-screen instructions. In Windows XP, click Control Panel, Performance and Maintenance, System, then click Device Manager on the Hardware sheet. In Windows 2000, click Control Panel, System, then Device Manager on the Hardware sheet.
If USB Printing Support is not displayed, make sure that the machine is correctly connected to the computer.
Check 3: Make sure that the USB cable is securely plugged in to the machine and the computer.
If a device error is displayed, refer to Windows help to resolve the error.
Check 1: If the Power lamp is off, make sure that the power plug is plugged in, then turn the machine on.

While the Power lamp is flashing green, the machine is initializing. Wait until the Power lamp stops flashing and remains lit green.
Check 2: Make sure that the USB cable is securely plugged in to the machine and the computer.
If you are using a relay device such as a USB hub, disconnect it, connect the machine directly to the computer, and try printing again. If printing starts normally, there is a problem with the relay device. Consult the reseller of the relay device for details. There could also be a problem with the USB cable. Replace the USB cable and try printing again.
Check 3: Make sure that your machine's name is selected in the Print dialog box.
Opening the Page Setup and Print Dialog Box (Macintosh)
Check: See Contact service center in An Error Message Is Displayed on the LCD and take the appropriate action.
Check: See Check inkU163 in An Error Message Is Displayed on the LCD and take the appropriate action.
Check: See Check inkU162 in An Error Message Is Displayed on the LCD and take the appropriate action.
Check: See Incompatible device in An Error Message Is Displayed on the LCD and take the appropriate action.
Check: See Unsupported USB hub in An Error Message Is Displayed on the LCD and take the appropriate action.
"Could not spool successfully due to insufficient disk space" Delete any unnecessary files to increase the amount of free space on the disk. "Could not spool successfully due to insufficient memory" Quit other running applications to increase available memory. If you still cannot print, restart your computer and retry printing. "Printer driver could not be found" Uninstall the printer driver according to the procedure described in Uninstalling the MP Drivers, and then reinstall it. "Could not print Application name - File name" Try printing again once the current job is complete.

If the Inkjet Printer/Scanner/Fax Extended Survey Program is installed, a confirmation screen asking for permission to send the printer usage information will be displayed three months and then six months after the installation. After that, it will be displayed every six months for about four years.
Read the instructions on the screen and follow the procedure below.

Click Agree, then follow the on-screen instructions. The printer usage information will be sent to Canon via the Internet. If you have followed the on-screen instructions, the information will be sent automatically from the second time onward and the confirmation screen will not be displayed again.
When the information is being sent, a caution screen such as an Internet security screen may be displayed. In this case, confirm that the program name is "IJPLMUI.exe", then allow it. If you deselect the Send automatically from the next time check box, the information will not be sent automatically from the second time onward and a confirmation screen will be displayed at the time of the next survey. To send the information automatically, see Changing the confirmation screen setting: .
Click Do not agree. The confirmation screen will be closed, and the survey at that time is skipped. The confirmation screen will be displayed again three months later.
To uninstall the Inkjet Printer/Scanner/Fax Extended Survey Program, click Uninstall, then follow the on-screen instructions.
In Windows Vista, select the Start menu > Control Panel > Programs and Features > Uninstall a program. In Windows XP, select the Start menu > Control Panel > Add or Remove Programs. In Windows 2000, select the Start menu > Settings > Control Panel > Add/Remove Programs.
In Windows Vista, a confirmation/warning dialog box may appear when installing, uninstalling or starting up software.

This dialog box appears when administrative rights are required to perform a task. If you are logged on to an administrator account, click Continue or Allow to continue.
If you select Yes after you have followed the on-screen instructions, the confirmation screen will be displayed at the time of the next survey. If you select No, the information will be sent automatically.
If you select Uninstall (or Remove), the Inkjet Printer/Scanner/Fax Extended Survey Program is uninstalled. Follow the on-screen instructions.
If the Inkjet Printer/Scanner/Fax Extended Survey Program is installed, the printer usage information is scheduled to be sent three months and then six months after the installation. After that, it is scheduled to be sent every six months for about four years. The Inkjet Printer/Scanner/Fax Extended Survey Program icon appears in the Dock when it is time to send the printer usage information.
In Mac OS X v.10.3.9, the Inkjet Printer/Scanner/Fax Extended Survey Program is not installed.
Read the instructions on the screen after clicking the icon, then follow the procedure below.

Click Agree, then follow the on-screen instructions. The printer usage information will be sent to Canon via the Internet. If you have followed the on-screen instructions, the information will be sent automatically from the second time onward and the confirmation screen will not be displayed again.
If you deselect the Send automatically from the next time check box, the information will not be sent automatically from the second time onward and the Inkjet Printer/Scanner/ Fax Extended Survey Program icon will appear in the Dock at the time of the next survey.

Click Do not agree. The confirmation screen will be closed, and the survey at that time is skipped. The confirmation screen will be displayed again three months later.
Click Turn off. The Inkjet Printer/Scanner/Fax Extended Survey Program is stopped, and the information will not be sent. To resume the survey, see Changing the setting:.
Changing the setting:
Empty the Trash and restart your computer.
To display the confirmation screen every time the printer usage information is sent or to resume surveying, follow the procedure below.

Do not display the confirmation screen when information is sent: If the check box is selected, the information will be sent automatically. If the check box is not selected, the Inkjet Printer/Scanner/Fax Extended Survey Program icon will appear in the Dock at the time of the next survey. Click the icon, then follow the on-screen instructions. Turn off/Turn on button: Click the Turn off button to stop the Inkjet Printer/Scanner/Fax Extended Survey Program. Click the Turn on button to restart the Inkjet Printer/Scanner/Fax Extended Survey Program.

Advanced Guide > Troubleshooting > For Windows Users
Check: Is the printer status monitor enabled?
Make sure that Enable Status Monitor is selected on the Option menu of the printer status monitor.
Opening the Printer Properties Dialog Box (Windows)

Page 750 of 817 pages Error Message Appears on a PictBridge Compliant Device
Advanced Guide > Troubleshooting > Error Message Appears on a PictBridge Compliant Device
The following are the possible errors that may occur when printing directly from a PictBridge compliant device and the countermeasures to clear them.
This section describes errors that are indicated on Canon-brand PictBridge compliant devices. The error messages and operations may vary depending on the device you are using. For errors on non -Canon PictBridge compliant devices, check the error message on the LCD and take the appropriate action to clear the error. For details, see An Error Message Is Displayed on the LCD . For the errors indicated on the PictBridge compliant device and their solution, also refer to the instruction manual of the device. For other troubles on the device, contact the manufacturer.
Error Message on the PictBridge
"Printer in use" If the machine is printing from the computer or warming up, wait until the job ends. When it is ready, the machine starts printing automatically.
"No paper" Load paper on the Rear Tray, and select Continue* in the display on your PictBridge compliant device. * To resume printing, you can also press the OK button on the machine instead of selecting Continue on the device.
"Paper Error" The Paper Output Tray is closed. Open the Paper Output Tray, then press the OK button on the machine.
"Paper jam" Select Stop in the display on your PictBridge compliant device to stop printing. Remove the jammed paper, load new paper, press the OK button on the machine, and try printing again.
"Printer cover open" Close the Scanning Unit (Cover) on the machine.
"No print head" The FINE Cartridge is not installed or the Cartridge may not be compatible with this machine. Check: See Check inkU051/U052/U053/U059 in An Error Message Is Displayed on the LCD and take the appropriate action.
"Waste tank full"/"Ink absorber full" The ink absorber is nearly full. Check: See Contact service center in An Error Message Is Displayed on the LCD and take the appropriate action.
"No ink"/"Ink cassette error" The FINE Cartridge has or may have run out of ink. The FINE Cartridge may not be installed properly or may not be compatible with this machine. Check the error message on the LCD and take the appropriate action to resolve the error.
An Error Message Is Displayed on the LCD
"Hardware Error" FINE Cartridge errors have occurred. Replace the FINE Cartridge.
"Printer error" An error requiring servicing may have occurred. (The Power lamp flashes green and Alarm lamp flashes orange alternately.) Disconnect the USB cable between the machine and the PictBridge compliant device, turn off the machine, and unplug the power cord of the machine from the power supply. Plug the power cord of the machine back in, turn on the machine, and then reconnect the PictBridge compliant
Compliant Device Action · Routine Maintenance

Page 751 of 817 pages Error Message Appears on a PictBridge Compliant Device
device to the machine. If the same error occurs, contact the service center.

Page 752 of 817 pages Cannot Print Properly from a Wireless Communication Device
Advanced Guide > Troubleshooting > Cannot Print Properly from a Wireless Communication Device
Printing via Bluetooth Communication

Advanced Guide > Troubleshooting > Problems with Scanning
Scanner Does Not Work
ScanGear (Scanner Driver) Does Not Start
Error Message Appears and the ScanGear (Scanner Driver) Screen Does Not Appear
Scan Quality (Image Displayed on the Monitor) Is Poor
Scanned Image Is Surrounded by Extra White Areas
Cannot Scan Properly with Multi Crop
Cannot Scan Properly in Auto Scan Mode
"There is not enough memory." Message Is Displayed
Computer Stops Operating during Scanning
Scanner Does Not Work After Upgrading Windows
Slow Scanning Speed

Advanced Guide > Troubleshooting > Problems with Scanning > Scanner Does Not Work
Check: Restart the computer.

Advanced Guide > Troubleshooting > Problems with Scanning > ScanGear (Scanner Driver) Does Not Start
Check 1: Make sure that the MP Drivers are installed.
If it is not installed, insert the Setup CD-ROM into the computer's disc drive, then select Custom Install and install MP Drivers.
Check 2: On the File menu of the application, select Select Source and select the machine.
Do not select the model name that includes WIA in it.
The operation may differ depending on the application.
Check 3: Start from a TWAIN-compliant application.

Page 756 of 817 pages Error Message Appears and the ScanGear (Scanner Driver) Screen Does N...
Advanced Guide > Troubleshooting > Problems with Scanning > Error Message Appears and the ScanGear (Scanner Driver) Screen Does Not Appear
Check 1: Make sure that the machine is turned on.
Check 2: Connect the USB cable to a different USB port on the computer.
Check 3: If the USB cable is connected to a hub, remove it from the hub and connect it to a USB port on the computer.
Check 4: Make sure that the MP Drivers are installed.
If it is not installed, insert the Setup CD-ROM into the computer's disc drive, then select Custom Install and install MP Drivers.
Check 5: On the File menu of the application, select Select Source and select the machine.
The operation may differ depending on the application.
Check 6: Make sure that the application is TWAIN-compliant.
You cannot open ScanGear (scanner driver) from applications not supporting TWAIN.
Check 7: Exit ScanGear (scanner driver) if it is running on another application.

Page 757 of 817 pages Scan Quality (Image Displayed on the Monitor) Is Poor
Advanced Guide > Troubleshooting > Problems with Scanning > Scan Quality (Image Displayed on the Monitor) Is Poor
Check 1: Increase the scanning resolution.
Check 2: Set the scale to 100%.
Some applications do not display images clearly if the image is too small.
Check 3: If moire (stripe pattern) appears, take the following measures and scan again.
On the Basic Mode tab of ScanGear (scanner driver), select Magazine(Color) in Select Source.
On the Advanced Mode tab of ScanGear (scanner driver), set Descreen in Image Settings to ON.
If moire appears when you scan a digital print photo, take the above measures and scan again.
If you use MP Navigator EX, set Document Type to Magazine(Color) or enable Descreen in the Scan Settings dialog box and scan again.
Scan Settings Dialog Box (Photos/Documents)
Check 4: Check the monitor's color depth.
From the Start menu, select Control Panel > Appearance and Personalization > Adjust screen resolution to open the Display Settings dialog box. Set the color depth to Medium (16 bit) or Highest (32 bit).
Windows XP:
From the Start menu, select Control Panel > Display to open the Display Properties dialog box. On the Settings tab, set Colors to Medium (16 bit) or Highest (32 bit).
Windows 2000:
From the Start menu, select Settings > Control Panel > Display to open the Display Properties dialog box. On the Settings tab, set Colors to High Color (16 bit) or True Color (32 bit).
Check 5: Clean the Platen and Document Cover.
See "Cleaning the Exterior of the Machine " to clean the parts.
Check 6: If the document is in poor condition (dirty, faded, etc.), use Reduce Dust and Scratches, Fading Correction, Grain Correction, etc. in Image Settings on the Advanced Mode tab of ScanGear (scanner driver).
Check 7: If the color tone of images with consistent color tone (such as the sky) is different from the original document, take the following measures and scan again.
On the Advanced Mode tab of ScanGear (scanner driver), set Auto Tone in Image Settings to OFF.
Open the Preferences dialog box from the Advanced Mode tab of ScanGear (scanner driver) and set Color Matching on the Color Settings tab.

Page 758 of 817 pages Scanned Image Is Surrounded by Extra White Areas
Advanced Guide > Troubleshooting > Problems with Scanning > Scanned Image Is Surrounded by Extra White Areas
Check: Specify the scan area.
(Auto Crop) in ScanGear (scanner driver) to automatically set the scan area for your document. You can also manually specify the scan area, for example when there are white margins along the document.
Click · Adjusting Cropping Frames

Advanced Guide > Troubleshooting > Problems with Scanning > Cannot Scan Properly with Multi Crop
Check 1: Make sure that the documents are placed correctly.
Check 2: Scan each item individually without using Multi Crop.
Some applications do not support multiple image scanning.
Placing Documents

Advanced Guide > Troubleshooting > Problems with Scanning > Cannot Scan Properly in Auto Scan Mode
Check 1: Make sure that the documents are placed correctly.
Check 2: Multiple image scanning may not be supported.
Some applications do not support multiple image scanning. In that case, scan each item individually.
Placing Documents

Advanced Guide > Troubleshooting > Problems with Scanning > Slow Scanning Speed
Check 1: To view the image on a monitor, set the output resolution to around 150 dpi. To print, set it to around 300 dpi.
Check 2: Set Fading Correction, Grain Correction, etc. to None.
Check 3: In MP Navigator EX, deselect the Correct slanted document checkbox and scan again.
Scan Settings Dialog Box
Check 4: In MP Navigator EX, deselect the Detect the orientation of text documents and rotate images checkbox and scan again.
Scan Settings Dialog Box
Resolution · Image Settings

Page 762 of 817 pages "There is not enough memory." Message Is Displayed
Advanced Guide > Troubleshooting > Problems with Scanning > "There is not enough memory." Message Is Displayed
Check 1: Exit other applications and try again.
Check 2: Reduce the resolution or output size and scan again.
Resolution

Advanced Guide > Troubleshooting > Problems with Scanning > Computer Stops Operating during Scanning
Check 1: Restart the computer, reduce the output resolution in ScanGear (scanner driver) and scan again.
Check 2: Delete unnecessary files to obtain sufficient free hard disk space, then scan again.
Error message may appear when scanning a large document at high resolution.
Check 3: For Location of Temporary Files in MP Navigator EX, specify a folder on a drive with sufficient free space.
See "General Tab" for details.
Check 4: Multiple devices may be connected to USB ports.
Disconnect other devices.

Advanced Guide > Troubleshooting > Problems with Scanning > Scanner Does Not Work After Upgrading Windows
Check: Disconnect the machine from the computer, then uninstall and reinstall the MP Drivers and MP Navigator EX.
See "Uninstalling the MP Drivers" for details.
MP Navigator EX is uninstalled.
Insert the Setup CD-ROM into the computer's disc drive, then select Custom Install and reinstall the MP Drivers and MP Navigator EX.

Advanced Guide > Troubleshooting > Software Problems
E-mail Software Program You Want to Use Does Not Appear in the Screen for Selecting an E-mail Software Program
Scanned Image Is Printed Enlarged (Reduced)
Scanned Image Is Enlarged (Reduced) on the Computer Monitor
Scanned Image Does Not Open

Page 766 of 817 pages E-mail Software Program You Want to Use Does Not Appear in the Screen f...
Advanced Guide > Troubleshooting > Software Problems > E-mail Software Program You Want to Use Does Not Appear in the Screen for Selecting an E-mail Software Program
E-mail Software Program You Want to Use Does Not Appear in the Screen for Selecting an E-mail Software Program
Check 1: MP Navigator EX may not support the e-mail software program.
The following e-mail software programs are supported. (Image are attached to the mail message automatically.)
- Windows Mail (Windows Vista)
- Outlook Express (Windows XP/Windows 2000)
Check 2: If an e-mail software program does not operate properly, check that the program's MAPI is enabled.
To enable MAPI, refer to the manual of the e-mail software program.
Check 3: If using an e-mail software program other than the ones listed above, select None (Attach Manually) when prompted to select a program and attach the scanned image manually.
- Microsoft Outlook

Advanced Guide > Troubleshooting > Software Problems > Scanned Image Is Printed Enlarged (Reduced)
Check: Set the printing size in the application.

Page 768 of 817 pages Scanned Image Is Enlarged (Reduced) on the Computer Monitor
Advanced Guide > Troubleshooting > Software Problems > Scanned Image Is Enlarged (Reduced) on the Computer Monitor
Check 1: Change the display setting in the application.
You cannot reduce the display size in "Paint." To reduce the display size, open the images in an application that accompanies the machine.
For details, refer to the application's manual. If you have any questions, contact the manufacturer of the application.
Check 2: Change the resolution setting in ScanGear (scanner driver) and scan again.
The higher the resolution, the larger the resulting image will be.
Resolution

Advanced Guide > Troubleshooting > Software Problems > Scanned Image Does Not Open
Check: If the file format is not supported by the application, scan the image again and save it in a popular file format such as JPEG.
For details, refer to the application's manual. If you have any questions, contact the manufacturer of the application.

Advanced Guide > Troubleshooting > MP Navigator EX Problems
Cannot Scan at the Correct Size
Position or Size of the Image Cannot be Detected Correctly When Scanning Using the Operation Panel
Document Is Placed Correctly, but the Scanned Image Is Slanted
Document Is Placed Correctly, but the Orientation Changes in the Scanned Image

Advanced Guide > Troubleshooting > MP Navigator EX Problems > Cannot Scan at the Correct Size
Check 1: Make sure that the documents are placed correctly.
Check 2: Set Document Size to the actual document size and scan again.
If the matching size is not found, scan at a larger size and trim the image.
See the Toolbar (Trimming) in "Correct/Enhance Images Window" for details.
Placing Documents

Page 772 of 817 pages Position or Size of the Image Cannot be Detected Correctly When Scanning...
Advanced Guide > Troubleshooting > MP Navigator EX Problems > Position or Size of the Image Cannot be Detected Correctly When Scanning Using the Operation Panel
Position or Size of the Image Cannot be Detected Correctly When Scanning Using the Operation Panel
Check 1: Make sure that the documents are placed correctly.
Check 2: Check that the MP Navigator EX settings are correctly set according to the document.
If you cannot scan properly with Auto Mode using the Operation Panel, specify the document type in MP Navigator EX.
Scanning Photos and Documents
Placing Documents

Page 773 of 817 pages Document Is Placed Correctly, but the Scanned Image Is Slanted
Advanced Guide > Troubleshooting > MP Navigator EX Problems > Document Is Placed Correctly, but the Scanned Image Is Slanted
Check: In MP Navigator EX, deselect the Correct slanted document checkbox and scan again.
Scan Settings Dialog Box (Photos/Documents)

Page 774 of 817 pages Document Is Placed Correctly, but the Orientation Changes in the Scanned ...
Advanced Guide > Troubleshooting > MP Navigator EX Problems > Document Is Placed Correctly, but the Orientation Changes in the Scanned Image
Check: In MP Navigator EX, deselect the Detect the orientation of text documents and rotate images checkbox and scan again.
Scan Settings Dialog Box (Photos/Documents)

Advanced Guide > Troubleshooting > Problems with Faxing
This section mainly describes the problems you may encounter when using a fax.
For details on messages for faxing displayed on the LCD, see A Message for Faxing Is Displayed on the LCD.
Problems Receiving Faxes · Problems Sending Faxes · Telephone Problems

Advanced Guide > Troubleshooting > Problems Receiving Faxes
Cannot Receive a Fax, Cannot Print a Fax
Machine Does Not Switch Automatically between Voice and Fax Calls
Quality of Received Fax is Poor
Errors Often Occur When You Receive a Fax
Check 1: Is the power turned on?
You cannot receive faxes if the power is turned off. Press the ON button to turn the power on. If you disconnected the power cord without turning off the power (the Power lamp is lit), reconnecting it turns on the power automatically. If you disconnected the power cord after pressing the ON button to turn off the power (the Power lamp is not lit), reconnect it, then press the ON button to turn on the power. If the power was turned off due to power failure, etc., the power is automatically turned on when the power failure is resolved.
Either print or delete documents in the machine's memory to free it up, then ask the sender to resend the fax.
Document Stored in Memory
Check the LCD for an error message.
A Message for Faxing Is Displayed on the LCD Print the Activity report and check for an error.
Check that the telephone line is connected correctly to the Telephone Line Jack and that the telephone (or another external device such as an answering machine or a computer modem) is connected correctly to the External Device Jack. Refer to your setup manual.
Check 5: Is a different size of paper from that specified by Page size loaded?
If a different size of paper from that specified by Page size is loaded on the Rear Tray, incoming faxes will not be printed completely and will be stored in memory. Load the same size of paper as that specified by Page size on the Rear Tray, then press the OK button on the machine.
Check 6: Is Page size set to other than A4, 8.5"x11"(LTR), or Legal (or 8.5"x14")?
If Page size is set to other than A4, 8.5"x11"(LTR), or Legal (or 8.5"x14"), the received fax will not be printed and will be stored in memory (Memory Reception). Set Page size to A4, 8.5"x11"(LTR), or Legal (or 8.5"x14").
If paper is not loaded on the Rear Tray, received faxes will be stored in memory without being printed. Load paper on the Rear Tray, then press the OK button.
If the ink has run out, received faxes will be stored in memory without being printed. Replace the FINE Cartridge, then print the faxes in memory.
Document Stored in Memory
If the machine was receiving faxes in the fax mode, printing will start automatically after the FINE Cartridge is replaced.
Activity Report

You can set the machine to forcibly print a received fax even if the ink has run out. However, part or all of the fax may not be printed since the ink has run out. Also, the contents of the fax will not be stored in memory. In addition, if the ink has already run out, we recommend that OFF be selected for Auto print in User settings to store the received fax in memory and print the fax manually after replacing the FINE Cartridge. For details, see Document Stored in Memory .
Check the receive mode setting and change it to a mode suited to your connection if necessary.
Setting the Receive Mode
Set Fax reception reject to OFF.
Set Caller ID service to Unsubscribed.
Check: Is the receive mode set to Fax priority mode?
If the receive mode is set to Fax only mode, there will be no automatic switching between voice and fax calls. Set the receive mode to Fax priority mode, DRPD*1, or Network switch*2. If the receive mode is TEL priority mode and an answering machine is connected to the machine, check whether a proper message is played back when the answering machine answers.
Setting the Receive Mode
*1 This setting is available only in the US and Canada.
*2 This setting may not be available depending on the country or region of purchase.
Check 1: Is ECM RX set to OFF?
Set ECM RX to ON.
If ECM RX is enabled, the sender's fax machine resends the fax after correcting errors automatically.
Check 2: Is the sender's original document or the scanning area of the sender's fax machine dirty?
The image quality of the fax is mainly determined by the sender's fax machine. Contact the sender and ask the sender to check whether the scanning area of the fax machine is dirty.
Check 3: Is ECM transmission/reception enabled although the line/connection is poor, or is the sender's fax machine compatible with ECM?
On your machine, select ON for ECM RX on Reception settings.
ECM RX Contact the sender and ask the sender to check whether the machine is set to enable ECM transmission. If the sender's or recipient's fax machine is not compatible with ECM, the fax will be sent/received in the standard mode. Reduce the reception start speed.
Print Results Not Satisfactory
Fax reception reject · Caller rejection · RX start speed

Check 1: Check the telephone line condition or the connection.
If the telephone line or connection is poor, reducing the reception start speed may correct the error. Reduce the reception start speed.
Contact the sender and ask the sender to check whether the fax machine is operating normally.
RX start speed

Advanced Guide > Troubleshooting > Problems Sending Faxes
Cannot Send a Fax
Cannot Perform Sequential Broadcasting by Redialing, or Cannot Dial Using the Numeric Buttons
Cannot Send a Fax Clearly
Errors Often Occur When You Send a Fax
Check 1: Is the power turned on?
You cannot send faxes if the power is turned off. Press the ON button to turn the power on. If you disconnected the power cord without turning off the power (the Power lamp is lit), reconnecting it turns on the power automatically. If you disconnected the power cord after pressing the ON button to turn off the power (the Power lamp is not lit), reconnect it, then press the ON button to turn on the power. If the power was turned off due to power failure, etc., the power is automatically turned on when the power failure is resolved.
When the In Use/Memory lamp is flashing, another document is being sent from memory. Wait until the machine finishes sending it.
Reconnect it to the Telephone Line Jack. Refer to your setup manual. If you still cannot send a fax, there is a problem with the telephone line. Contact your telephone company and the manufacturer of your terminal adapter or telephone adapter.
Check the telephone line type setting and change it as necessary.
Confirming the Telephone Line Connection
Resend the fax after a while. If you still cannot send the fax, set Dial tone detect to OFF.
Make sure that the fax number is registered correctly for speed dialing.
Registering Recipients for Speed Dialing
Check the LCD for an error message.
A Message for Faxing Is Displayed on the LCD Print the Activity report and check for an error.
Printing the Activity report manually
Check that the telephone line is connected correctly to the proper jack. If so, then there is a problem with your telephone line. Contact your telephone company.
Remove the document, then reload it on the Platen Glass or in the ADF.
Loading Paper / Originals
Check the error message on the LCD, then resolve the problem.
An Error Message Is Displayed on the LCD
Dial tone detect

If you are in a hurry, press the Stop button to close the message, then send the fax.
Cannot Perform Sequential Broadcasting by Redialing, or Cannot Dial Using the Numeric Buttons
Check: Have you already selected the recipient from the redial history, or already dialed a number by using the Numeric buttons?
You can dial one recipient by selecting from the redial history or by using the Numeric buttons as the recipient of sequential broadcasting. Select the recipient from the coded speed dial code list.
Check 1: Is the document loaded correctly?
Remove the document, then reload it on the Platen Glass or in the ADF.
Loading Paper / Originals
Check 2: Is the Platen Glass and/or the inner side of the Document Cover dirty?
Clean the Platen Glass and/or the inner side of the Document Cover, then reload the document.
Cleaning the Platen Glass and Document Cover
Check 3: Is the image quality setting or the scan contrast setting suitable for the document?
On the LCD, select an image quality setting and a scan contrast setting that are suitable for the document.
Check 4: Is the original document loaded with the wrong side facing upwards or downwards?
When loading a document on the Platen Glass, the side to be scanned should be face down. When loading a document in the ADF, the side to be scanned should be face up.
Thick or curled documents may not be sent as good quality faxes, because of a shadow or distortion caused when such documents are scanned. Press on the Document Cover with your hand when scanning.
Check: Check the telephone line condition or the connection.
If the telephone line or connection is poor, reducing the transmission start speed may correct the error. Reduce the transmission start speed.
Sending Faxes · TX start speed

Advanced Guide > Troubleshooting > Telephone Problems
Telephone Disconnects During a Call
Check 1: Is the telephone line connected correctly?
Check that the telephone line is connected correctly. Refer to your setup manual.
Check the telephone line type setting and change it as necessary.
Confirming the Telephone Line Connection
Check: Is the telephone line or the telephone (or a peripheral device such as an external telephone, an answering machine, or a computer modem) connected correctly?
Check that the telephone line and the telephone (or a peripheral device such as an external telephone, an answering machine, or a computer modem) are connected correctly.
Cannot Dial

Advanced Guide > Troubleshooting > FAQs
No Printing Results/Printing Is Blurred/Colors Are Wrong/White Streaks
Machine Moves But Ink Is Not Ejected
Cannot Install the MP Drivers
Printing Does Not Start
Copying/Printing Stops Before It Is Completed
Writing Error/Output Error/Communication Error
Print Results Not Satisfactory
Paper Does Not Feed Properly
Paper Jams

Advanced Guide > Troubleshooting > If You Cannot Resolve the Problem
If you cannot resolve the problem with any of the workarounds in this chapter, please contact the seller of the machine or the service center.
Canon support staff are trained to be able to provide technical support to satisfy customers.
If the machine emits any unusual sound, smoke, or odor, turn it off immediately. Unplug the power cord from the outlet and contact the seller or the service center. Never attempt to repair or disassemble the machine yourself. Attempts by customers to repair or take apart the machine will invalidate any warranty regardless of whether the warranty has expired.
Before contacting the service center, confirm the following:
Product name: * Your machine's name is located on the front cover of the setup manual. Serial number: please refer to the setup manual Details of the problem What you tried to solve the problem, and what happened

Advanced Guide > Troubleshooting > Instructions for Use (Printer Driver)
This printer driver is subject to the following restrictions. Keep the following points in mind when using the printer driver.
With some applications, the Copies setting in the Page Setup tab of the printer driver may not be enabled. In this case, use the copies setting in the Print dialog box of the application software.
If the selected Language in the About dialog box does not match the operating system interface language, the driver screen may not be displayed properly.
Do not change the Advanced tab items of the printer properties. If you change any of the items, you will not be able to use the following functions correctly. Also, if Print to file is selected in the Print dialog box of the application software and with applications that prohibit EMF spooling, such as Adobe Photoshop LE and MS Photo Editor, the following functions will not operate.
Preview before printing on the Main tab
Prevent loss of print data in the Print Options dialog box
Page Layout, Poster, Booklet, Duplex Printing, Specify Margin..., Print from Last Page, Collate, and Stamp/Background... on the Page Setup tab
Since the resolution in the preview display differs from the printing resolution, text and lines in the preview display may appear different from the actual print result.
With some applications, the printing is divided into multiple print jobs. To cancel printing, delete all divided print jobs.
If image data is not printed correctly, display the Print Options dialog box from the Page Setup tab and change the setting of Disable ICM required from the application software. This may solve the problem.
If you use the Bluetooth option and perform one of the actions listed below, the print job may not end and "Printing" may remain displayed on the status monitor even after printing ends and the printout is ejected. If this happens, either click the Cancel Printing button on the Status Monitor or cancel that print job from the print job queue of the printer.
If you move the machine during printing to a location where radio waves cannot reach or if the radio wave status becomes poor
If you turn off the machine
If you are using a Bluetooth printer and you cancel printing after a printer error occurs, you may not be able to execute subsequent printing operations. If this happens, turn off the machine and turn it back on again.
If you are using Bluetooth, you cannot use the operation panel on the machine while the status monitor is displayed from View Printer Status... on the Maintenance tab.
Software windows may not appear correctly on Windows Vista when fonts are set to Larger scale. If you want to display the windows with Larger scale fonts, set the desktop theme to Windows Classic as follows:

Desktop changes to Windows Classic display.
There are following restrictions in Microsoft Word (Microsoft Corporation).
If Microsoft Word has the same printing functions as the printer driver, use Word to specify them.
When selecting Scaled, Fit-to-Page, or Page Layout from the Page Layout list on the Page Setup tab, the selected printing function may not be effective, depending on the version of Word. If this happens, follow the procedure below.
Illustrator/Adobe Systems Inc. If Bitmap Printing takes effect, printing may take time or some data may not be printed. Print after clearing the Bitmap Printing check box in the Print dialog box.

Advanced Guide > Troubleshooting > General Notes (Scanner Driver)
ScanGear (scanner driver) is subject to the following restrictions. Keep these points in mind when using it.
When using the NTFS file system, the TWAIN data source may not be invoked. This is because the TWAIN module cannot be written to the winnt folder for security reasons. Contact the computer's administrator for help.
Some computers (including laptops) connected to the machine may not resume correctly from standby mode. In that case, restart the computer.
Do not connect two or more machines or multifunction printers with scanner function to the same computer simultaneously. If multiple scanning devices are connected, you cannot scan from the Operation Panel of the machine and also may experience errors while accessing the devices.
Software screens may not appear correctly on Windows Vista when font size is set to Larger scale. If you want to display the screens with Larger scale fonts, change the theme in Appearance and Personalization to Windows Classic as follows: 1. From the Start menu, select Control Panel. 2. Select Appearance and Personalization > Personalization > Theme. The Theme Settings dialog box opens. 3. On the Theme tab of the Theme Settings dialog box, select Windows Classic under Theme. 4. Click OK. Desktop changes to Windows Classic view.
Use the default display font size of the OS. Otherwise, software screens may not appear correctly.
Scanning may fail if the computer has resumed from sleep or standby mode. In that case, follow these steps and scan again. 1. Turn off the machine. 2. Exit ScanGear (scanner driver), then disconnect the USB cable from the computer and reconnect it. 3. Turn on the machine.
ScanGear (scanner driver) cannot be opened in multiple applications at the same time. Within an application, ScanGear (scanner driver) cannot be opened for the second time when it is already open.
Be sure to close the ScanGear (scanner driver) window before closing the application.
Make sure that you have adequate disk space available when scanning large images at high resolutions. For example, at least 300 MB of free space is required to scan an A4 document at 600 dpi in full-color.
ScanGear (scanner driver) and WIA driver cannot be used at the same time.
Do not enter the computer into sleep or hibernate state during scanning.
Calibration may take time if the machine is connected via USB 1.1.
If you start Media Center included in Windows XP Media Center Edition 2005, you may not be able to scan using the Operation Panel of the machine. In that case, restart the computer.
You cannot scan images with Media Center included in Windows Vista™ and Windows XP Media Center Edition 2005. Scan with other applications such as MP Navigator EX.
In some applications, you may encounter a problem when you use Multi-Crop in the Advanced Mode tab of ScanGear (scanner driver). In that case, scan each document individually, changing Paper Size according to the document.
In some applications, if you select the View scanned images checkbox in the Auto Scan Mode tab of ScanGear (scanner driver), the window displaying the thumbnails of the scanned images may close automatically.

Some applications may not display the TWAIN user interface. In that case, refer to the application's manual and change the settings accordingly.
Some applications do not support continuous scanning of multiple documents. In some cases, only the first scanned image is accepted, or multiple images are scanned as one image. For such applications, do not scan multiple documents from the ADF.
When scanning platen size images into a Microsoft Office application (such as Word, Excel or PowerPoint), click Custom Insert in the Insert Picture from Scanner or Camera screen. Otherwise, images may not be scanned correctly.
Images may not be scanned correctly in some applications. In that case, increase the operating system's virtual memory and retry.
When image size is too large (such as when scanning large images at high resolution), your computer may not respond or the progress bar may remain at 0% depending on the application. In that case, cancel the action (for example by clicking Cancel on the progress bar), then increase the operating system's virtual memory or reduce the image size/resolution and retry. Alternatively, scan the image via MP Navigator EX first, then save and import it into the application.

Advanced Guide > Troubleshooting > General Notes (Fax Driver)
This fax driver is subject to the following restrictions. Keep the following points in mind when using the fax driver.
Microsoft Excel 2002 may not always work correctly when sending a document as a fax using the fax driver and with the option Allow A4/Letter Paper Resizing. Follow the instructions below to solve the problem:
If you use a network compatible printer, the following message appears to stop sending if you send a fax from your computer to a printer on the network when someone else is sending from another computer:
"The fax transmission was unsuccessful. Check the followings and send your fax again: - cable connections - printer status - recipient information - recipient's fax line is not busy - (when connected to the network) fax is not being sent from other computer"
If you assign the fax driver to the Bluetooth port, you cannot send a fax from the computer.

Advanced Guide > Appendix
Deleting the Undesired Print Job
Updating the MP Drivers
Uninstalling the On-Screen Manuals
Opening the Printer Properties Dialog Box (Windows)
Opening the Page Setup and Print Dialog Box (Macintosh)
Opening the Canon IJ Printer Utility (Macintosh)
Sharing the Printer on a Network
Printing Area · Transporting the Machine

Advanced Guide > Appendix > Printing Area
To ensure the best print quality, the machine allows a margin along each edge of media. The actual printable area will be the area inside these margins.
: Canon recommends that you print within this area.
: The area where it is possible to print.
However, printing in this area can affect the print quality or the paper feed precision.

By selecting Borderless Printing option, you can make prints with no margins. When performing Borderless Printing, slight cropping may occur at the edges since the printed image is enlarged to fill the whole page. For Borderless Printing, use the following paper:
Glossy Photo Paper "Everyday Use" GP-501 Photo Paper Glossy GP-502 Photo Paper Plus Semi-Gloss SG-201 Photo Paper Pro Platinum PT-101 Photo Paper Plus Glossy II PP-201 Photo Paper Pro II PR-201 Matte Photo Paper MP-101 Performing Borderless Printing on any other type of paper may substantially reduce printing quality and/or result in printouts with altered color hues. Borderless Printing on plain paper may result in printouts with reduced quality. Use them only for test printing. You can perform Borderless Printing on plain paper only when printing from your computer. Depending on the type of paper, Borderless Printing may reduce the print quality at the top and bottom edges of the paper or cause these parts to become smudged. In Borderless Copying, you can specify the amount of extension by Extended copy amt. in Print settings.
Changing the Machine Settings on the LCD
Other Sizes than Letter, Legal, Envelopes


Advanced Guide > Appendix > Printing Area > Other Sizes than Letter, Legal, Envelopes
A5 5.56 x 7.95 inches / 141.2 x 202.0 mm
A4 8.00 x 11.38 inches / 203.2 x 289.0 mm
B5 6.90 x 9.80 inches / 175.2 x 249.0 mm
4" x 6" / 10 x 15 cm 3.73 x 5.69 inches / 94.8 x 144.4 mm
4" x 8" / 10 x 20 cm* 3.73 x 7.69 inches / 94.8 x 195.2 mm
5" x 7" / 13 x 18 cm* 4.73 x 6.69 inches / 120.2 x 169.8 mm
8" x 10" / 20 x 25 cm 7.73 x 9.69 inches / 196.4 x 246.0 mm
Wide 3.73 x 6.80 inches / 94.8 x 172.6 mm
* This page size can be used only when printing from your computer.

Advanced Guide > Appendix > Printing Area > Letter, Legal
Size Printable Area (width x height)
Letter 8.00 x 10.69 inches / 203.2 x 271.4 mm
Legal 8.00 x 13.69 inches / 203.2 x 347.6 mm

Recommended printing area · Printable area

Advanced Guide > Appendix > Printing Area > Envelopes
Size Recommended Printing Area (width x height)
European DL* 4.06 x 7.07 inches / 103.2 x 179.5 mm
US Comm. Env. #10* 3.86 x 7.91 inches / 98.0 x 200.8 mm
* This page size can be used only when printing from your computer.

Recommended printing area

Advanced Guide > Appendix > Deleting the Undesired Print Job
If the printer does not start printing, the print job data cancelled or failed may be remaining. Delete the undesired print job by using the Canon IJ Status Monitor.
Click the Status Monitor button displayed on the Task Bar. The Canon IJ Status Monitor appears.
Click Display Print Queue The print queue window opens.
Select Cancel All Documents from the Printer menu. When the confirmation message appears, click Yes.
The print job is deleted.
Users who have not been granted access permission for printer management cannot delete the print job of another user.
When you perform this operation, all print jobs are deleted. If the print queue list contained a necessary print job, start the printing process over from the beginning.

Advanced Guide > Appendix > Updating the MP Drivers
Obtaining the Latest MP Drivers
Uninstalling the MP Drivers
Before Installing the MP Drivers
Installing the MP Drivers

Advanced Guide > Appendix > Updating the MP Drivers > Obtaining the Latest MP Drivers
The MP Drivers include a printer driver, scanner driver (ScanGear), and fax driver.
By updating the MP Drivers to the latest version of the MP Drivers, unresolved problems may be solved.
Access our web site through the Internet and download the latest MP Drivers for your model.
You can download the MP Drivers for free, but any Internet access charges incurred are your responsibility. Before installing the latest MP Drivers, delete the previously installed version. For information on how to delete the MP Drivers, refer to Uninstalling the MP Drivers.
Before Installing the MP Drivers
Installing the MP Drivers

Advanced Guide > Appendix > Updating the MP Drivers > Uninstalling the MP Drivers
The MP Drivers you no longer use can be deleted. When deleting the MP Drivers, first exit all programs that are running.
The procedure to delete the unnecessary MP Drivers is as follows:
1. Start the uninstaller
In Windows Vista or Windows XP, select the Start menu -> All Programs -> "Your model name" -> MP Drivers Uninstaller.
In Windows 2000, select the Start menu -> Programs -> "Your model name" -> MP Drivers Uninstaller.
The MP Drivers Uninstaller dialog box is displayed.
In Windows Vista, a confirmation/warning dialog box may appear when installing, uninstalling or starting software. This dialog box appears when administrative rights are required to perform a task. If you are logged on to an administrator account, click Continue or Allow to continue. Some applications require an administrator account to continue. If you are logged on to a standard account, switch to an administrator account, and restart the operation from the beginning.
Click Execute. When the confirmation message appears, click Yes. When all the files have been deleted, click Complete.
The deletion of the MP Drivers is completed.
Printer driver, fax driver, and scanner driver (ScanGear) will be deleted if you uninstall the MP Drivers.
If there is no uninstaller in the Start menu of Windows Vista, follow these steps:
Select the Start menu -> Control Panel -> Hardware and Sound -> Printers. Click the model to delete, then press the Alt key on your keyboard. On the File menu, click Delete.
If the User Account Control dialog box appears, click Continue. Then when the confirmation message appears, click Yes. The icon is deleted.
Press the Alt key. On the File menu, select Run as administrator, and then click Sever Properties If the User Account Control dialog box appears, click Continue.
Click the Drivers tab. In the Installed printer drivers list, click the printer to delete.
When you click Remove..., Remove Driver And Package dialog box is displayed.

Select Remove driver and driver package, and then click OK. In the confirmation dialog box, click Yes.
When data collection is completed in the Remove Driver Package dialog box, click Delete.
The deletion of the printer driver is complete.
You may not be able to delete the printer driver properly from the Installed printer drivers list. If this happens, restart your computer, and try again.

Advanced Guide > Appendix > Updating the MP Drivers > Before Installing the MP Drivers
This section describes the items that you should check before installing the MP Drivers. You should also refer to this section if the MP Drivers cannot be installed.
Properly connect the personal computer and the machine. For details on connection instructions, refer to the "Install the Software" in the manual: Getting Started.
Turn off the machine.
Terminate all running applications.
In Windows Vista, log on as a user who has the administrator rights. In Windows XP, log on as the computer administrator. In Windows 2000, log on as a member of the Administrators group.
If an old version of the MP Drivers is already installed, first delete (uninstall) that version. For instructions on deleting the MP Drivers, see Uninstalling the MP Drivers.
Obtaining the Latest MP Drivers
Installing the MP Drivers

Advanced Guide > Appendix > Updating the MP Drivers > Installing the MP Drivers
You can access our web site through the Internet and download the latest MP Drivers for your model.
The procedure for installing the downloaded MP Drivers is as follows:
If you turn on the computer while the machine is on, the Windows Plug and Play function is executed automatically, and the Found New Hardware window (Windows Vista) or Found New Hardware Wizard window (Windows XP, Windows 2000) is displayed. In this case, click Cancel.
Double-click the icon of the downloaded file. The installation program starts.
In Windows Vista, a confirmation/warning dialog box may appear when installing, uninstalling or starting software. This dialog box appears when administrative rights are required to perform a task. If you are logged on to an administrator account, click Continue or Allow to continue. Some applications require an administrator account to continue. If you are logged on to a standard account, switch to an administrator account, and restart the operation from the beginning.
At the Welcome window, click Next. Read the contents of the License Agreement window. After checking the contents, click Yes. Installation of the MP Drivers begins.
After the Installation Complete window is displayed, check that the machine and the computer are connected through a cable.
To select the connection port for your machine manually, check the Select printer port check box, and click Manual selection. At the Select printer port window, select the connection destination, and then click OK.
Click Complete. Turn on the machine, and wait awhile until the connection is recognized.
This procedure installs the MP Drivers.
Depending on the environment you are using, a message prompting you to restart the computer may be displayed. To complete the installation properly, restart the computer.
You can download the MP Drivers for free, but any Internet access charges incurred are your responsibility.
Obtaining the Latest MP Drivers
Before Installing the MP Drivers

Advanced Guide > Appendix > Uninstalling the On-Screen Manuals
Follow the procedure below to uninstall all of the installed on-screen manuals from your computer.
Before uninstalling the on-screen manuals, exit all on-screen manuals that are opening.
All of the installed on-screen manuals will be deleted at the same time.
When the message prompting you to restart your computer is displayed, click OK to restart your computer.
On-screen manuals other than printer driver's help and scanner driver's help are uninstalled at a time.
Canon XXX On-screen Manual icon (where "XXX" is your machine's name) on your desktop into the trash.

Advanced Guide > Appendix > Transporting the Machine
When relocating the machine, pack the machine using the original packing materials.
If you do not have the original packing materials, pack the machine carefully using protective material and place it inside a sturdy box.
Do not transport or store the machine slanted, vertically, or upside-down, as the ink may leak and damage the machine.
Do not unplug the machine while the Power lamp is lit or flashing green, as it may cause malfunction or damage to the machine, making the machine unable to print.
Pack the machine with the FINE Cartridges left installed in the machine.
Clearly label the box as "FRAGILE" or "HANDLE WITH CARE".

Advanced Guide > Appendix > Opening the Printer Properties Dialog Box (Windows)
The printer driver setup window can be displayed through the application software in use or the Start menu of the Windows.
Follow the procedure below to configure print settings when printing.
In general, select Print on the File menu to open the Print dialog box.
The printer properties dialog box opens.
Depending on application software you use, command names or menu names may vary and there may be more steps. For details, refer to the user's manual of your application software.
Follow the procedure below to perform maintenance operations such as print head cleaning, or to configure print settings that are common for all application software.
In Windows Vista, select the Start menu > Control Panel > Hardware and Sound > Printers. In Windows XP, select the Start menu > Control Panel > Printers and Other Hardware > Printers and Faxes. In Windows 2000, select the Start menu > Settings > Printers.
The printer properties dialog box opens.
Opening the printer properties dialog box through Properties displays such tabs regarding the Windows functions as the Ports (or Advanced) tab. Those tabs do not appear when opening through Printing Preferences or application software. About tabs regarding Windows functions, refer to the user's manual for the Windows.

Page 804 of 817 pages Opening the Page Setup and Print Dialog Box (Macintosh)
Advanced Guide > Appendix > Opening the Page Setup and Print Dialog Box (Macintosh)
You can open the Page Setup dialog box and the Print dialog box from the application program you are using.
Open the Page Setup dialog box to specify page (paper) settings before printing.
The Page Setup dialog box opens.
Open the Print dialog box to specify print settings before printing.
The Print dialog box opens.

Advanced Guide > Appendix > Opening the Canon IJ Printer Utility (Macintosh)
To open the Canon IJ Printer Utility, follow the procedure below.
The job list of your machine is displayed.

The Printer List opens.

The Canon IJ Printer Utility starts up.

The Printer List opens.


The Canon IJ Printer Utility starts up.

Advanced Guide > Appendix > Sharing the Printer on a Network
If multiple computers are being used in the network environment, you can share the printer connected to one computer with other computers. The Windows versions of the computers connected to the network do not necessarily have to be the same.

Settings on Print Server
Describes the procedure for setting up a computer directly connected to a printer with a USB cable.
Settings on Client PC
Describes the procedure for setting up those computers that will use this printer through the network. When you execute print, the data is sent through the print server system to the printer.
In case an error occurred when a document is printed by the client system to a shared printer, the error message of Canon IJ Status Monitor will be displayed both on the client system and the print server system. For regular printing, Canon IJ Status Monitor will be displayed only on the client system.
Install the printer driver from the Setup CD-ROM that accompanies the machine on the print server system and each of the client systems according to the OS of each system.
Restrictions on Printer Sharing

Advanced Guide > Appendix > Sharing the Printer on a Network > Settings on Print Server
To use a printer in a network, set printer sharing on the print server system.
The procedure for setting up the print server systems is as follows:
For details on installation instructions, refer to the "Install the Software" in the manual: Getting Started.
In Windows Vista, select the Start menu -> Control Panel -> Hardware and Sound -> Printers.
In Windows XP, select the Start menu -> Control Panel -> Printers and Other Hardware -> Printers and Faxes.
In Windows 2000, select the Start menu -> Settings -> Printers.
The Printers window (Windows Vista, Windows 2000) or Printers and Faxes window (Windows XP) is displayed.
In Windows Vista, press the Alt key on your keyboard and then select Run as administrator -> Sharing... from the displayed File menu.
In Windows XP or Windows 2000, select Sharing... from the File menu.
Windows XP may display a message recommending the user to use the Network Setup Wizard to set up sharing. When this message appears, choose not to use the wizard and then set up sharing.
Select Share this printer (Windows Vista, Windows XP) or Shared as (Windows 2000) on the Sharing tab to set a shared name as desired, and click OK.
In Windows Vista, a confirmation/warning dialog box may appear when installing, uninstalling, or starting software. This dialog box appears when administrative rights are required to perform a task. If you are logged on to an administrator account, click Continue or Allow to continue. Some applications require an administrator account to continue. If you are logged on to a standard account, switch to an administrator account, and restart the operation from the beginning.
This completes the setup on the print server system. Next, set up the client systems.

Advanced Guide > Appendix > Sharing the Printer on a Network > Settings on Client PC
After setting up the print server system, set up the client system.
The procedure for setting up the client systems is as follows:
1. Install the printer driver on the client systems
To install the driver, load the Setup CD-ROM that comes with the machine, and select Custom Install. For details on connection instructions, refer to the "Install the Software" in the manual: Getting Started.
During the installation, a screen prompting you to turn the printer on appears. Click Manual Selection and then select an appropriate port to complete your installation.
Select the Start menu -> Network -> Add a printer. The Add Printer window appears.
Select Add a network, wireless or Bluetooth printer, and click the icon for the printer that you have configured on the print server system to be shared, and then click Next.
If the icon for the printer is not displayed, check that the printer is actually connected to the print server. It may take some time for the icon for the printer to appear.
Take the appropriate action as described on the screen and then click Finish. The icon for the shared printer will be created in the Printers window.
This completes the setup on the client systems. You can now share the printer in the network.
1. Install the printer driver on the client systems
To install the driver, load the Setup CD-ROM that comes with the machine, and select Custom Install. For details on connection instructions, refer to the "Install the Software" in the manual: Getting Started.
During the installation, a screen prompting you to turn the printer on appears. Click Manual Selection and then select an appropriate port to complete your installation.
In Windows XP, select the Start menu -> Control Panel -> Printers and Other Hardware -> Printers and Faxes -> Add a printer.
In Windows 2000, select the Start menu -> Settings -> Printers -> Add a printer.
When Welcome to the Add Printer Wizard screen appears, click Next.

3. Add a printer
Select A network printer, or a printer attached to another computer (Windows XP) or Network printer (Windows 2000), then click Next.
On the Specify a Printer window (Windows XP) or Locate Your Printer window (Windows 2000), click Next and then search for the print server system.
Click the icon for the printer that you have configured on the print server system to be shared, and then click Next.
If the icon for the printer is not displayed, check that the printer is actually connected to the print server.
Take the appropriate action as described on the screen and then click Finish. The icon for the shared printer will be created in the Printers and Faxes window (Windows XP) or Printers window (Windows 2000).
This completes the setup on the client systems. You can now share the printer in the network.

Advanced Guide > Appendix > Sharing the Printer on a Network > Restrictions on Printer Sharing
These are restrictions that apply if you are using a printer in a network environment. Check the restrictions for the environment you are using.
A print completion message may be displayed. To disable the message display, follow the procedure below.
In Windows Vista:
Press the Alt key from the Printers window on the client system. Open Run as administrator -> Server Properties... from the displayed File menu.
Uncheck Show informational notifications for network printers on the Advanced tab, and then restart the computer.
In Windows XP or Windows 2000:
Open Server Properties from the File menu of the Printer and Faxes window (Windows XP) or the Printers window (Windows 2000) on the print server system.
Uncheck Notify when remote documents are printed on the Advanced tab, and then restart the computer.
The bi-directional communication function is disabled so that the correct printer status may not be recognized.
If a client user opens the printer driver properties and then clicks OK with the Enable bidirectional support check box on the Ports tab unchecked, the bi-directional function of the printer server system may also be disabled. In this case, check Enable bidirectional support check box on both the print server system and the client system.
When you print from a client system, you cannot use Canon IJ Preview.
If the functions on the Maintenance tab cannot be set properly from a client system, they may be grayed out. In this case, change the settings from the print server.
When you change the settings of the print server, you should delete the icon of the shared printer from the client system, and then specify the shared settings again in the client system.
If the same printer driver is installed in the print server system and the client system as the local printer
The net crawl function may automatically create a network printer icon on the client system.

Advanced Guide > Using Easy-PhotoPrint EX
Easy-PhotoPrint EX allows you to create albums, calendars and stickers easily using photos taken with digital cameras.
You can also print borderless photos easily.
See the section below for details on how to use Easy-PhotoPrint EX.
Printing with the Bundled Application Software
Creating a personalized photo album is an easy task if you use Easy-PhotoPrint EX!
All you need to do is select which photos to use, select a layout, then load paper into your printer and print. After you bind the printed sheets, you'll have the one and only album of your memories!



You can change the layout and background, and attach
comments to photos.


You can also select the size and orientation. You can arrange a photo across the left and right
pages.
Select a theme (background design) to create a single-themed album.
You can add text and frames to photos. Attach a description of the photo in an album, and add a frame to enhance the photo's atmosphere.


Select Album to add text and frames. You cannot decorate photos with Photo Print.
Create calendars easily with Easy-PhotoPrint EX. Create your own calendar using your favorite photos! It'll be exciting to turn the calendar pages.



You can use all kinds of photos. You can also create 2-month, 6-month and 12-month
calendars.
Create stickers easily with Easy-PhotoPrint EX!
Create stickers of your favorite photos and share them with your friends!

You can add text to photos.

Advanced Guide > Using MP Navigator EX
MP Navigator EX is an application that enables you to easily scan photos and documents. It is suitable even for beginners.
See "Let's Try Scanning" for details on how to scan images using MP Navigator EX.
You can scan easily by navigating through MP Navigator EX screens. You can also save/print scanned images using MP Navigator EX.

You can scan multiple small documents (photos, cards, etc.) at one time. It is useful as you do not need to scan multiple times.

You can easily scan documents that are larger than the Platen using MP Navigator EX. It allows you to scan the left and right halves of a document separately and combine them back into one image.


In One-click Mode, MP Navigator EX completes from scanning to saving, with a click of an icon. One-click Mode also allows you to scan and save images as PDF files or attach them to e-mail automatically.

You can easily correct/enhance scanned photos using MP Navigator EX. You do not need to use other applications.

For details on how to use MP Navigator EX, refer to " Scanning with the Bundled Application Software ."

Advanced Guide > About Solution Menu
Solution Menu is a menu window that provides quick access from your desktop to Canon applications, manuals, and online product information.

The number and types of buttons displayed in the window may vary depending on your printer and region.
To start from desktop, see below.
Double-click the Canon Solution Menu icon on the desktop. Alternatively, from the Start menu, select (All) Programs > Canon Utilities > Solution Menu > Solution Menu.
From the next time, Solution Menu starts when Windows starts.
If the Start Solution Menu when Windows starts checkbox at the bottom left of the window is not selected, Solution Menu does not start when Windows starts.
Solution Menu will start automatically when you install it using the Setup CD-ROM that accompanies the printer.
(window size: small) on the title bar to change the window size (large or small).
Solution Menu opens with the last used window size next time it is started.
When screen size is small
Click


Follow the same steps to view the manuals or online product information.
Internet connection is required to access the online information. Internet connection fees apply.
(Close) on the title bar.
This software is subject to the following restriction. Keep this point in mind when using it.
All icons of the installed applications that support Solution Menu are displayed in the window. After the installation, you cannot rearrange the icons or delete only the icons.
Click
Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.