
Unpack the Machine
1 Prepare the Machine 2 Install the Print Head 3 Install the Ink Tanks 4 Align the Print Head
Hardware setup and Print Head alignment is complete. a Place the machine on a fl at and
a Remove the Print Head from its
a Peel back the orange tab completely
a Pinch the Paper Guide and slide it to
horizontal surface, and do not place any objects in front of the machine. Open the Sheet Feeder Cover and pull the Paper Support, then the Paper Output Tray and open the Output Tray Extension.
Operation Panel to select the language for the LCD, then press the OK button.
package.
and remove the plastic wrapper from the ink tank.
the left end.
If the orange-colored protective fi lm is not removed completely, problems with printing may occur.
(1) Press the { or }
button to select the language.
protective cap located on the bottom of the ink tank.
(2) Press the OK
button.
Protective Cap Do not press!
the Print Head and discard it.
Once the message “Install the print head and set the ink tank.” appears, go to f.
(MP-101) into the Auto Sheet Feeder with the printing side (whiter side) facing up, align the paper with the right side of the Cover Guide, then slide the Paper Guide against the paper stack.
until it locks into place. The Print Head Holder moves to the center.
Protective Cap Print Head Nozzles
slot and press the mark on the ink tank until it clicks into place.
Cover).
(1) Open the Document Cover.
(2) Move the Scanner Lock Switch towards the
release mark to unlock the Scanning Unit (Printer Cover).
until it stops.The Print Head Lock Lever may feel heavy.
message requesting head alignment, then press the OK button.
Turn the Easy-Scroll Wheel left or right to easily select a menu or a setting item. For details, refer to “Basic Operation for the Operation Panel” in the Quick Start Guide.
d Make sure the ink lamp lights red.
d Insert the Print Head.
Refer to the color guide on the Print Head Lock Lever.
Scanning Unit (Printer Cover)
* You can also use the {, }, [, or ] button to select.
machine and connect the other end to the wall outlet.
e Push the Print Head to hold it in place,
Scanning Unit (Printer Cover).
and lower the Print Head Lock Lever.
the serial number located inside the machine. You will need this to register your product.
The pattern is printed. And Print Head is aligned automatically.
Cassette
For information on how to load paper in the Cassette, refer to “Loading Paper in the Cassette” in “Loading Printing Paper” of the Quick Start Guide.
the ON/OFF button to turn on the machine.
Inner Cover Serial Number Location

Macintosh ® MP Drivers Installation
Windows
f Read the License Agreement carefully and click Yes.
Follow the on-screen instructions to install the software. If a message asking for your confirmation to restart your computer appears, click OK.
contents, then click Install.
h Read the License Agreement carefully and click Yes.
Follow the on-screen instructions to install the software.
machine with a USB cable, then turn the machine on. The software will begin identifying the printer port being used.
i Follow the on-screen instructions to register your product.
(1) Press the ON/OFF button.
(2) Make sure that the POWER lamp stops flashing.
other to the machine.
b Turn the computer on and start Windows.

appears, click Restart.


The system is restarted automatically.
b Turn on your Mac.
* When using Mac OS X v.10.2.8 to v.10.3.3: Restarting the computer while connected to the machine may cause the machine not to be detected. To resolve this, either unplug the USB cable then plug it back in again, or turn the machine off then back on again.
automatically.
c Insert the Setup CD-ROM.
on the desktop. d Double-click the Setup icon.
. d When the main menu appears, click Easy Install.
h Follow the on-screen instructions to register your product.
(start Print Center if you are using Mac OS X v.10.2.8) and then check that the printer name you want to use is shown in Printer List. If the printer name is not displayed, click Add to add the device. For more detailed instructions, refer to the Mac on-screen Help.

administrator name and password. Click OK. If you do not know your administrator name or password, click
, then follow the on-screen instructions.
appears, click Exit.

Now you have completed installation of the software.

f When the main menu appears, click Easy Install.

If Restart is displayed, make sure that the Restart the system now (recommended) check box is selected, then click Restart. Now you have completed installation of the software.
contents, click Install.
Part no. QT5-0786-V01 © 2006 Canon Inc. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries. Macintosh and Mac are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. Adobe and Adobe RGB (1998) are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. All other product and brand names are trademarks of their respective owners. Specifications subject to change without notice. Printed in Thailand.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.