
SERVICE MANUAL
Canon
Copyright 2005, Canon U.S.A. This technical publication is the proprietary and confidential information of Canon U.S.A. which shall be retained for reference purposes by Authorized Service Facilities of Canon U.S.A. Its unauthorized use is prohibited.

The following do not apply if they do not conform to the laws and regulations of the region where the manual or product is used:
Product and brand names appearing in this manual are registered trademarks or trademarks of the respective holders.
All rights reserved. No parts of this manual may be reproduced in any form or by any means or translated into another language without the written permission of Canon Inc., except in the case of internal business use.
Copyright © 2005 by Canon Inc. CANON INC. Inkjet Device Quality Assurance Div. 2 451, Tsukagoshi 3-chome, Saiwai-ku, Kawasaki-shi, Kanagawa 212-8530, Japan
Trademarks · Copyright

This manual consists of the following three parts to provide information necessary to service the PIXMA MP800:
Part 2: Technical Reference New technology and technical information such as FAQ's (Frequently Asked Questions) of the PIXMA MP800
Reference: This manual does not provide sufficient information for disassembly and reassembly procedures. Refer to the graphics in the separate Parts Catalog.


MAINTENANCE

1-1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement Consumables by Service Engineer
adjustable. The red screws securing the paper feed motor may be loosened only at replacement of the paper feed motor unit. *1: Only for CD / DVD printing supported regions.
No periodic maintenance is necessary.
(3) Periodic replacement parts
There are no parts in this machine that require periodic replacement by a service engineer.
(1) Adjustment · (2) Periodic maintenance

There are no consumables that require replacement by a service engineer.
1-2. Customer Maintenance
*1: Only for CD / DVD printing supported regions.
1-3. Product Life
Specified print volume (I) or the years of use (II), whichever comes first. (I) Print volume: 14,000 pages
(4) Replacement consumables · (1) Machine · (2) Print head

(3) Ink tank (target value)
settings in the Windows XP driver, using Word 2003. Color chart: When printing the ISO/JIS-SCID N5 pattern on A4 size plain paper in bordered printing, with the default settings
in the Windows XP driver, using Photoshop 7.0. Photo chart: When printing the Canon standard pattern on 4" x 6" Photo Paper Plus Glossy in borderless printing, with the
default settings in the Windows XP driver, using Windows XP Photo Printing Wizard. The print yield in the table above is an average value measured in continuous printing, using the ink tank immediately after it is unsealed, until the ink is out. Ink yield may vary depending on texts and photos printed, application software, print mode, and type of paper used. When the machine is turned on and while printing, each ink may be used for protecting the print head and maintaining print quality.
1-4. Special Tools
1-5. Serial Number Location On the carriage flexible cable holder (visible on the right of the carriage after the machine is turned on, the scanning unit is opened, and the carriage moves to the center).


To the table of contents To the top

Errors and warnings are displayed on the LCD.
2-1. Operator Call Errors (by Alarm LED Lit in Orange)
Inner cover closed before start of CD / DVD printing (print
[1850] Open the inner cover, place the CD-R tray and press [OK].
Open the inner cover which functions as the CD / DVD tray feeder, set the CD / DVD tray in the feeder, and press the OK

continuable)*1. button.

2-2. Service Call Errors (by Cyclic Blinking in Orange (Alarm LED) and Green (COPY button), or Alarm LED Lit in Orange)
Service call errors are indicated by the number of cycles the Alarm LED and COPY button blink, and the corresponding error code is displayed on the LCD.

Alarm LED lit Scanner lock error
[5020] The scanner is not in the home position at power-on. Since the error takes place assuming that the scanner lock switch is not unlocked before power-on, the Alarm LED is lit in orange and the message is displayed on the LCD (as with an operator call error), though the internal process is categorized as a service call error. On the LCD, "Release the scanner lock switch and turn the power off and back on." is displayed.
- Turn the machine off, unlock the
scanner lock switch, then turn the machine on again.
22 times Scanner error [5010] The scanner unit cannot detect the home position, or the scanner unit warming-up is not done properly at power-on. On the LCD, "Scanner is not operating correctly." is displayed.
ROM error [6100] The check sum value is incorrect in the ROM check at hard-power-on.
- Logic board ass'y
Alarm LED lit RAM error [6300] The RAM error occurred in the RAM check at hard-power-on.
- Logic board ass'y
2-3. Other Error Messages
Message on the LCD Cause Solution
Printing is unavailable. Data received via wireless communication is not photo data.
The received image data was invalid in infrared communication from a mobile phone.
The error message is displayed for a while, then the LCD automatically returns to the initial screen you see when the COPY, SCAN, PHOTO/FILM, or MEMORY CARD button is pressed.
The selected paper cannot be fed from cassette. Change the paper source.
The paper type being used is not supported for paper feeding from the cassette.
Change the paper source to the ASF.
Cannot specify the followings together. Change one of the settings.
Settings made conflict each other. The error message is displayed for a while, then the LCD automatically returns to the display before the error occurrence.
Device memory is full. Cannot continue process. Reduce the number of photos to print.
The memory is not sufficient to do the print job.
Reduce the amount of data to be printed, or print from a computer.
Failed to scan. Either document cannot be scanned or is not placed on the platen glass.
The machine failed in scanning the document for Fit-to-page copy, or photos or films were not recognized in pre-scanning.
Press the OK button to clear the error. The LCD automatically returns to the display before the error occurrence.
The Black button was pressed, but it is invalid.
A temporary error. Press the Color button to continue the operation.
The Color button was pressed, but it is invalid.
A temporary error. Press the Black button to continue the operation.
There are no photos in memory card. Supported image files are not in the memory card.
The error message is displayed for a while, then disappears.
The value exceeds the number of copies you can print.
During selecting images or specifying the number of copies, the total print quantity exceeds the prescribed value of 999.
After the error message is displayed for a while, the last operation before the error is cancelled, and the total print quantity returns to the value before the error.
Memory card is not set. Insert the card after checking the direction.
No memory card is inserted in the slot. Set a memory card.
DPOF information is not saved in the memory card.
DPOF print was selected in the menu, but no DPOF files are contained in the memory card.
The error message is displayed for a while, then the LCD automatically returns to the display before the error occurrence.
The number of copies to print is not set. Input the number of copies.
Multi-photo print was attempted without specifying the print quantity (with the print quantity left "0" (zero)).
The error message is displayed for a while, then disappears. Specify the print quantity.
This layout is available only for A4 or 8.5"x11"(LTR). In Layout print, "Mixed 1, 2, or 3" which is available only with A4 or LTR size paper is selected, but the paper size is not set to A4 or LTR.
The error message is displayed for a while, then the LCD automatically returns to the display before the error occurrence.
- Scanner unit · Continuous alternate blinking

Settings cannot be changed when printing stickers.
With Sticker print selected, the Settings button was pressed.
The error message is displayed for a while, then the LCD automatically returns to the display before the error occurrence.
Change the setting after removing the card.
With a memory card inserted in the slot, change of the Read/Write attribute was attempted.
The error message is displayed for a while, then the LCD automatically returns to the display before the error occurrence.
The card is currently write-enabled. Set to read-only mode before performing operation.
With the memory card set to the Read/write mode, Card Direct printing operation was attempted from the menu.
The error message is displayed for a while, then the LCD automatically returns to the display before the error occurrence.
The paper size is not correct. Check the page size you have set.
Non-supported size of paper for PictBridge Camera Direct printing is selected.
Cancel printing on the digital camera.
Failed to scan Photo Index Sheet. Check the orientation, position and marking.
The machine failed in scanning the Photo Index Sheet.
Press the OK button to clear the error. The LCD automatically returns to the display before the error occurrence.
Failed to scan. Try again. The machine failed in scanning the film. No film was set, or selection of a film type (color or black & white, positive or negative) was wrong.
Press the OK button to clear the error. The LCD automatically returns to the display before the error occurrence.
Film scanning error. Remove FAU (Film Adapter Unit) protective sheet.
The optical volume was insufficient for scanning the film. (The FAU protective sheet was not removed, or the lamp itself was defective.)
Press the OK button to clear the error. The LCD automatically returns to the display before the error occurrence.
Photo scan error. Photo size is too large. Leave at least 10mm between photos.
In cropping multiple photos at the same time, since the space between the photos were not sufficient, the photos were considered as a single JPEG file, and the file became too large.
Press the OK button to clear the error. The LCD automatically returns to the display before the error occurrence.
Perform operation after the film is scanned.
After the PHOTO/FILM button was pressed, printing was attempted from the menu without scanning photos or films.
The error message is displayed for a while, then the LCD automatically returns to the display before the error occurrence.
2-4. Warnings
Low ink The following ink is low. Continue? (Icon of each ink tank) Yes No
- Select Yes, and press the OK button.
=> Printing starts, and it is indicated on the LCD. - Select No, and press the OK button.
=> Printing is cancelled, and the LCD returns to
the display immediately before printing was attempted. In Camera Direct Printing, only "Yes" can be selected.
Print head temperature rise
If the print head temperature does not fall, the error code "5200" is displayed, indicating the print head temperature rise error.
When the print head temperature falls, the error is automatically cleared. Note: If the print head temperature exceeds the specified limit when the scanning unit (printer cover) is opened, the carriage does not move to the ink tank replacement position.
Protection of excess rise of the print head temperature
If the print head temperature does not fall, the error code "5200" is displayed, indicating the print head temperature rise error.
If the print head temperature exceeds the specified limit, an intermission is inserted during printing.
Restrictions on paper The current paper cannot be set. Change the size and type.
Re-select the supported paper type and size.
Recommendation of the print head alignment (only on arrival of the machine)
Head alignment required. Load paper and press [OK].
- Select Yes, and press the OK button.
=> Automatic print head alignment is done. - Select No, and press the OK button.
=> The procedures on arrival of the machine are
finished.
USB cable not connected Connect USB cable and turn on the PC. Connect the USB cable.
Cancellation of trimming Reset trimming effect? With a trimmed image present, when printing on a DVD or CD is attempted, the message is displayed.
Yes No

Yes No - Select Yes, and press the OK button.
=> The trimming is cancelled, and printing on a
DVD or CD can be done. - Select No, and press the OK button.
=> The LCD returns to the display immediately
before the message was displayed.
Cancellation of image select information
Reset the selected photo information? Yes No
When one or more images are selected in Multi- photo print or Layout print, and if a user tries to display the menu or sub-menu, the message is displayed. - Select Yes, and press the OK button.
=> The image selection is cancelled, and the
menu or sub-menu is displayed. - Select No, and press the OK button.
=> The LCD returns to the display immediately
before the message was displayed.
2-5. Troubleshooting by Symptom
Faulty operation The power does not turn on. The power turns off immediately after power-on.
- Confirm the connection of
- the power cord, and - between the logic board and the power supply unit. - Replace the
- AC adapter, or - logic board ass'y.
A strange noise occurs. - Remove foreign material.
- Attach a removed part if any.
- Check the operation of the moving parts (such as purge
unit, carriage unit, and paper feeding mechanism)
- Replace a faulty part, if any.
Nothing is displayed on the LCD. - Confirm the connection between the operation panel, the
scanner unit, and the logic board. - Replace the
- LCD, or - logic board ass'y.
A portion of the LCD is not displayed. - Perform the button and LCD test in the service mode, and
confirm that the LCD is displayed without any segments missing. - Confirm the connection between the operation panel, the
scanner unit, and the logic board. - Replace the
- LCD, or - logic board ass'y.
Paper feed problems (multi-feeding, skewed feeding, no feeding)
- Examine the inside to confirm that no parts are damaged,
and the rollers are clean. - Remove foreign material. - Adjust the paper guide properly. - Confirm the connection of each harness and the logic
board. - Replace the
- sheet feeder unit, - cassette, or - logic board ass'y.
Symptom Solution

Carriage movement problems (contact to other parts, strange noise)
- Confirm that the carriage timing slit strip film is free from
damage or grease. - Clean the carriage timing slit strip film (with ethanol and
lint-free paper). - Replace the
- carriage timing slit strip film, or - carriage unit.
Faulty scanning (no scanning, strange noise)
- Confirm the connection between the scanner unit and the
logic board. - Replace the
- scanner unit, or - logic board ass'y.
The FAU lamp does not light. - Confirm the connection between the scanner unit, FAU,
and the logic board. - Replace the
- document pressure plate unit (FAU), or - logic board ass'y.
Unsatisfactory print quality No printing, or no color ejected. - Replace the
- print head*1, or
- logic board ass'y. - Remove foreign material from the purge unit caps, if any. - Replace the purge unit.
Printing is faint, or white lines appear on printouts even after print head cleaning. Line(s) not included in the print data appears on printouts.
- Remove and re-install the print head. - Replace the
- print head*1,
- purge unit, or - logic board ass'y.
Paper gets smeared. - Feed several sheets of paper. - Perform bottom plate cleaning.
- Clean the paper path with cotton swab or cloth.
- Clean the ASF sub-rollers.
A part of a line is missing on printouts. - Replace the
- ink tank, or
- print head*1.
Color hue is incorrect. - Replace the
- ink tank, or
- print head*1.
- Perform print head alignment.
Printing is incorrect. Replace the logic board ass'y.
No ejection of black ink. - Replace the
- ink tank, or
- print head*1.
- Remove foreign material from the purge unit caps, if any.
- Replace the purge unit.
Graphic or text is enlarged on printouts. When enlarged in the carriage movement direction: - Clean grease or oil off the timing slit strip film - Replace the
- timing slit strip film, - carriage unit, or - logic board ass'y.
- ink tank, · - ink tank,

When enlarged in the paper feed direction: - Clean grease or oil off the timing slit disk film - Replace the
- timing slit disk film, - timing sensor unit, or - logic board ass'y.
Faulty scanning No scanning. - Confirm the connection between the scanner unit and the
logic board ass'y. - Replace the
- scanner unit, or - logic board ass'y.
Streaks or smears on the scanned image. - Clean the platen glass and the FAU lamp. - Confirm the connection between the scanner unit and the
logic board ass'y. - Replace the
- scanner unit, - logic board ass'y, or - sponge sheet.
*1: Replace the print head only after the print head deep cleaning is performed 2 times, and when the problem persists.
To the table of contents To the top

3-1. Notes on Service Part Replacement (and Disassembling / Reassembling)
Service part Notes on replacement*1 Adjustment / settings Operation check
Logic board ass'y QM2-3022
- Before removal of the logic
After replacement: 1. Initialize the EEPROM. 2. Set the destination in the EEPROM. 3. Reset the waste ink counter. 4. Correct the CD / DVD and automatic print head alignment sensors. 5. Check the ink system function. 6. Adjust the line feeding. [See 3-3. Adjustment / Settings, (8) Service mode, for details of 1 to 6] 7. Perform the print head alignment in the user mode.
- EEPROM information print - Service test print - Printing via USB connection - Copy - Direct printing from a digital
board ass'y, remove the power cord, and allow for approx. 1 minute (for discharge of capacitor's accumulated charges), to prevent damages to the logic board ass'y. - Before replacement, check the
waste ink amount (by service test print or EEPROM information print). [See 3-4. Verification Items, (1) Service test print, or (2) EEPROM information print, for details.]
- Service test print
- EEPROM information print
At replacement: 1. Apply grease to the sliding portions. [See 3-3. Adjustment / Settings, (2) Grease application.] After replacement: 1. Correct the CD / DVD and automatic print head alignment sensors. [See 3.3. Adjustment / Settings, (8) Service mode.] 2. Check the ink system function. [See 3.3. Adjustment / Settings, (8) Service mode.]
- Service test print (Confirm
CD / DVD and automatic print head alignment sensor correction, and ink system function.)
Paper feed motor QK1-1502
- The red screws securing the
At replacement: 1. Adjust the paper feed motor. [See 3-3. Adjustment / Settings, (1) Paper feed motor adjustment.]
paper feed motor are allowed to be loosened. (DO NOT loosen any other red screws.)
- Service test print
PR lift shaft ass'y: QL2- 0936 At replacement: 1. Apply grease to the sliding portions. [See 3.3. Adjustment / Settings, (2) Grease application.]
- Service test print
Carriage lift base unit
At replacement: 1. Apply grease to the sliding portions.

[See 3.3. Adjustment / Settings, (2) Grease application.]
Timing slit strip film QC1-6526
- Upon contact with the film,
After replacement: 1. Perform the print head alignment in the user mode.
- Service test print
wipe the film with ethanol. - Confirm no grease is on the
Timing slit disk film QC1-6229
film. (Wipe off any grease thoroughly with ethanol.) - Do not bend the film
After replacement: 1. Perform the print head alignment in the user mode.
- Service test print
- Make sure that the flexible cables and wires in the harness are in the proper position and connected correctly.
[See 3-2. Special Notes on Repair Servicing, (3) Flexible cable and harness wiring, connection, for details.]
- Do not drop the ferrite core, which may cause damage.
- Protect electrical parts from damage due to static electricity.
- Before removing a unit, after removing the power cord, allow the machine to sit for approx. 1 minute (for capacitor
discharging to protect the logic board ass'y from damages).
- Do not touch the timing slit strip film and timing slit disk film. No grease or abrasion is allowed.
- Protect the units from soiled with ink.
- Protect the housing from scratches.
- Exercise caution with the red screws, as follows:
i. The red screws of the paper feed motor may be loosened only at replacement of the paper feed motor unit (DO
NOT loosen them in other cases).
ii. DO NOT loosen the red screws on both sides of the main chassis, securing the carriage shaft positioning (they are
not adjustable in servicing)
To the table of contents To the top
Print head QY6-0061

3-2. Special Notes on Repair Servicing
(1) External cover, scanner unit, and FAU removal
(I) Remove the cassette, and front door (paper output tray) with door damper.
- Slide the cassette to remove it from the main unit. - Slightly warp the front door to release the right side of the door. - While releasing the door damper on the left side of the front door, remove the door.



(II) Remove the screws (in the red circles below) from the side covers and the main case.



(III) Remove the front cover L and R.
Front cover L: - Protect the cover from being scratched or the claws from being damaged by the Open button or the release lever. - While removing the side cover L by sliding its front side outward (in the direction of the red arrow in the photo below),
remove the front cover L. - For the correct locations of claws and bosses on the back side of the front cover L, see the photo on the right (4 claws in
the purple circles, 2 bosses in the green circles).


Front cover R: - While removing the side cover R by sliding its front side outward (in the direction of the red arrow in the photo below),
remove the front cover R.

- Also remove the card door which is between the front cover R and the side cover R. - For the correct locations of claws and bosses on the back side of the front cover R, see the photo on the right (4 claws in
the purple circles, 2 bosses in the green circles).


(IV) Remove the cable cover.
- Push the claw of the side cover R (indicated by the triangle mark in the red circle in the photo) with a flat-blade
screwdriver to release. - Slide the side cover R outward so that the cable cover in the back can be removed. - Lift the cable cover to remove the FAU cable from the groove of the side cover.


(V) Remove the side cover L and R (3 claws each).
Side cover R: - Be cautious of the FAU cable, IrDA board, and card LED guide. - For the shape of the boss and recess, see the photos below. - The bosses of the bottom case will fit into the square holes of the side cover.



Side cover L: - Be cautious not to contact the Open button.

Back of the side covers: - The boss and recess are shown in the red circles in the photos below (side cover L on the left, side cover R on the right).



(VI) Remove the scanner unit and FAU cables from the logic board.
- The photo on the left shows the cables connected, and the photo on the right shows the cables removed. [See Part 3, 2.
CONNECTOR LOCATION AND PIN LAYOUT.] Note: A square core is taped to the CN602 connector.


(VII) Remove the scanner stop arm.
- While holding the scanner unit, disengage the main case side of the scanner stop arm. - While twisting the scanner stop arm, disengage the scanner unit side of the scanner stop arm.



- When assembling the scanner stop arm, make sure the black sticker side is up, as shown in the photos below (overhead
view).


(VIII) Remove the FAU and the scanner unit.
- Lift the FAU out from the hinge holes of the scanner unit. - Disengage one side of the scanner unit from the main case, then the other side (see the photo on the right).


(IX) Remove the paper support.
- Disengage one side of the paper support from the main case, then the other side of the paper support. - The photo on the right shows the main unit with the external parts removed.



(2) Operation panel removal
(I) Remove the panel cover L and R.
- Insert a flat-blade screwdriver into a space between the panel cover and the scanner unit, and slowly push the cover up to
remove it. - For claws, see the photos below (5 claws each).


(II) Remove the panel board.
- Remove the 4 screws (in the blue circles in the photo below) from the panel board.

- Release the 2 claws (in the yellow circles in the photo), and raise the panel board. - While paying attention to the 3 locations at the top of the panel board (in the green circles in the photo) , turn the panel
board over.



- Remove the cable from the connector, and separate the panel board from the scanner unit.


(3) Flexible cable and harness wiring, connection
Be cautious of wiring of the flexible cables and harness. Improper wiring or connection may cause breakage of a line, leading to ignition or emission of smoke. For wiring details, refer to the Parts Catalog, and [Part 3, 2. CONNECTOR LOCATION AND PIN LAYOUT]. Rear view with the main case removed: (Logic board side on the left, AC adapter / PF motor side on the right)

(I) Logic board ass'y wiring

Each cable in place of the side of the bottom case unit: (Be cautious of the points in the red circles.)

With the IrDA board, memory card board, and bottom case unit removed:

(II) AC adapter and paper feed motor side wiring
With the bottom case unit and AC adapter installed: (Be cautious of the position of the solenoid relay harness connector in the red circle.)


With the bottom case unit and AC adapter removed:

To the table of contents To the top

3-3. Adjustment / Settings
(1) Paper feed motor adjustment
Perform the following adjustments when the paper feed motor unit is replaced: 1) When attaching the motor, fasten the screws so that the belt is properly stretched (in the direction indicated by the blue arrow in the figure below). 2) After replacement, be sure to perform the service test print, and confirm that no strange noise or faulty print operation (due to dislocation of the belt or gear, or out-of-phase motor, etc.) occurs


(2) Grease application



To the table of contents To the top

(3) Waste ink counter setting
Before replacement of the logic board ass'y, check the waste ink amount. After the logic board ass'y is replaced, set the waste ink amount to the replaced logic board ass'y. In addition, according to the waste ink amount, replace the waste ink absorber (ink absorber kit). When the waste ink absorber is replaced, reset the waste ink counter (to "0%").
How to check the waste ink amount:
See 3-4. Verification Items, (1) Service test print, or (2) EEPROM information print. How to set the waste ink amount:
See 3-3. Adjustment / Settings, (8) Service mode, "Waste ink amount setting."
(4) White sponge sheet attachment
Position one of the corners of the white sponge sheet at the scanning reference point on the platen glass (back left where the blue lines cross in the photo below). Peel off the cover sheet from the double-sided adhesive tape, and slowly close the document cover with the sponge frame on. The sponge sheet will attach to the sponge frame.

Open the document cover to confirm the following: - No extension of the sponge edges over the mold part of the document cover. - No gap between the platen glass reference edges and the corresponding sponge edges.
Position the solenoid so that the solenoid shaft is parallel to the tray lock lever operation axis. Move the tray lock lever right and left to confirm that the solenoid shaft moves smoothly. (For cable position, see the photo on the right.)


(5) Solenoid position

(6) Front door damper position
Fit the door damper (attached to the front door) into the machine with the protrusion side facing up. Then, fix the right side of the front door in place. Close the front door, and press the Open button to confirm the front door opens properly.


On the operation panel, select Maintenance/settings, Device settings, and a desired function, then press the OK button.
Nozzle check To confirm the print head nozzles eject ink properly. Do the cleaning if necessary.
Cleaning To unclog the print head nozzles and maintain the print head in a good condition. Use this function when printing is missing or white lines appear on the nozzle check pattern.
Deep cleaning To improve the print head nozzle conditions when the cleaning is not effective. Since the deep cleaning consumes more ink than the cleaning, use this function only when necessary.
Auto head align (automatic print head alignment)
To improve unsatisfactory print results or dot-misalignment on a line.
Manual head align (manual print head alignment)
To improve unsatisfactory print results or dot-misalignment on a line. Use this function when the automatic print head alignment cannot be done properly, or to align the print head at user's discretion.
Head alignment print To print the current print head alignment values for confirmation.
Roller cleaning To solve a paper feed problem. In the roller cleaning, the paper feed rollers rotate while being pressed to the paper lifting plate. Since the rollers will wear, use this function only when necessary.
Bottom plate cleaning To remove ink attached to the ASF paper path and the platen, using paper.
1) With the machine power turned off, while pressing the Stop/Reset button, press and hold the ON/OFF button. (DO NOT release the buttons). The COPY button lights in green to indicate that a function is selectable. 2) While holding the ON/OFF button, release the Stop/Reset button. (DO NOT release the ON/OFF button.) 3) While holding the ON/OFF button, press the Stop/Reset button 2 times, and then release both the ON/OFF and Stop/Reset buttons. (Each time the Stop/Reset button is pressed, the Alarm LED and COPY button light alternately, Alarm in orange and COPY in green, starting with Alarm LED.) 4) When the COPY button lights in green, press the Stop/Reset button the specified number of time(s) according to the function listed in the table below. (Each time the Stop/Reset button is pressed, the Alarm LED and COPY button light alternately, Alarm in orange and COPY in green, starting with Alarm LED.)
Time(s) LED indication Function Remarks
0 times Green (COPY) Power off When the print head is not installed, the carriage returns and locks in the home position capped.
(7) User mode · Function Purpose · (8) Service mode

1 time Orange (Alarm) Service test print See 3-4. Verification Items, (1) Service test print.
2 times Green (COPY) EEPROM information print
Set a sheet of A4 or letter size paper. See 3-4. Verification Items, (2) EEPROM information print.
3 times Orange (Alarm) EEPROM initialization The following items are NOT initialized, and the shipment arrival flag is not on:
- USB serial number - Destination settings - Waste ink counter
- CD / DVD correction value
- LF correction value
Once in the service mode: Press the On/Off button 2x after pressing the Stop button 4x.
4 times Green (COPY) Waste ink counter resetting
5 times Orange (Alarm) Destination settings See 3-3. Adjustment / Settings, (8) Service mode, "Destination settings procedures."
6 times Green (COPY) Print head deep cleaning (Cleaning of both black and color)
7 times Orange (Alarm) LF correction See 3-3. Adjustment / Settings, (8) Service mode, "LF correction procedures."
8 times Green (COPY) CD / DVD check pattern print Not used in servicing
9 times Orange (Alarm) CD / DVD print position correction (horizontal: X direction)
Not used in servicing.
10 times Green (COPY) CD / DVD print position correction (vertical: Y direction)
Not used in servicing.
11 times Orange (Alarm) Button and LCD test See 3-3. Adjustment / Settings, (8) Service mode, "Button and LCD test procedures"
12 times Green (COPY) Return to the menu selection
13 times Orange (Alarm) Return to the menu
14 times Green (COPY) Left margin correction Not used in servicing.
15 times Orange (Alarm) Waste ink amount setting See 3-3. Adjustment / Settings, (8) Service mode, "Waste ink amount setting procedures"
16 to 21 times Green at even numbers (COPY)
Return to the menu selection
Orange at odd numbers (Alarm)
without any changes. - At the end of the service mode, press the ON/OFF button. To protect the media sensor from being dislocated during
transportation, the paper lifting plate of the sheet feeder unit will be raised.
In the destination settings mode, press the Stop/Reset button the specified number of time(s) according to the destination listed in the table below, and press the ON/OFF button.
Time(s) LED indication Destination CD / DVD print
0 times Green (COPY) No change of the destination
1 time Orange (Alarm) Japan Supported
2 times Green (COPY) Korea Not supported
selection ·

3 times Orange (Alarm) US Not supported
4 times Green (COPY) Europe Supported
5 times Orange (Alarm) Australia Supported
6 times Green (COPY) Asia Supported
7 times Orange (Alarm) China Supported
8 times Green (COPY) Taiwan Supported
9 times or more Orange (Alarm) Return to the menu selection
the Print Beam settings or copy paper settings from being different from the destination settings). Confirm the model name and destination in service test print or EEPROM information print. [See 3-4. Verification Items, (1) Service test print, or (2) EEPROM information print.]
Confirm the operation after replacement of the operation panel unit, logic board, or LCD.







Set the waste ink amount data to a replaced new EEPROM after the logic board is replaced in servicing.
Time(s) Waste ink absorber Remarks
0 times Main waste ink absorber
1 time Platen waste ink absorber Not valid for the MP800
Both the main and platen waste ink

2 times absorbers Only the main waste ink absorber is valid for the MP800
3 times or more Not valid Press the ON/OFF button to return to the waste ink amount setting mode.
Time(s) Waste ink amount value to be set (%)
10 times or more Not valid.
Press the ON/OFF button to return to the waste ink amount setting mode.
After replacement of the feed roller ass'y or logic board ass'y in repair servicing or in refurbishment operation, adjust the line feeding.
Time(s) Paper type Paper name
1 time High Resolution Paper Canon HR-101
Canon PB PAPER GF-500, Office Planner
3 times HP BrightWhite, OFFICE 80
4 times Canon Extra, STEINBEIS
- The High Resolution Paper is the most desirable for LF correction printing (Canon HR-101 is used at the production site),
but 6 kinds of plain paper listed in the table above can also be used in LF correction. If plain paper other than the above is used, select any one of the paper types in this step, then select Pattern No. 0 (zero) in the step 3) below.
- Each time the Stop/Reset button is pressed, the Alarm LED and the COPY button light alternately, Alarm in orange and
COPY in green.
- If the Stop/Reset button is NOT pressed, and only the ON/OFF button is pressed, the machine remains in the LF correction
mode.
- If the Stop/Reset button is pressed 5 times or more, then the ON/OFF button is pressed, the machine returns to the service
mode menu selection.


- If plain paper other than the 6 kinds specified in the table in step 1) is used, select the Pattern No. 0 (zero), leave the
Stop/Reset button untouched, and press the ON/OFF button.
- Each time the Stop/Reset button is pressed, the Alarm LED and the COPY button light alternately, Alarm in orange and
COPY in green.
- If the Stop/Reset button is pressed 3 times or more, then the ON/OFF button is pressed, the machine returns to the service
mode menu selection.


To the table of contents To the top

3-4. Verification Items
(1) Service test print
On the service test print (sample below), confirm the EEPROM information as shown below. (The information is given in the upper portion of the printout.)
M: Main firmware version
C: Card reader firmware version
AB (K = OK Y = ...): Ink system check result
On the service test print (sample below), confirm the following items:
- Check 1, top of form accuracy: The lines shall not extend off the paper.
- Check 2, EEPROM information
- Check 3, nozzle check pattern: Ink shall be ejected from all nozzles.
- Check 4, check pattern for irregular line feeding: There shall be no remarkable streaks or unevenness.
- Check 5, check pattern for uneven printing due to line feeding: There shall be no remarkable streaks.
- Check 6, check pattern for uneven printing due to carriage movement (9600 dpi mode): There shall be no remarkable unevenness.
- Check 7, check pattern for uneven printing due to carriage movement (standard mode): There shall be no remarkable unevenness.
- Check 8, CD / DVD sensor and automatic print head alignment sensor correction: The results shall be OK.
·


(2) EEPROM information print
Print sample:

ER(ER0=1000 ER1=5100) LPT=2005/06/28-09:09
PC(M=002 R=000 T=001 D=009 C=009)
CLT(BK=2005/06/28-18:30 CL=2005/06/28-18:30)
CH=00001 CT(PBK=040 BK=020 Y=109 M=012 C=113) IS(PBK=1 BK=0 Y=1 M=1 C=2)
UR(A(BKoe)=000 B(Coe)=000 C(Moe)=000 D(SCoe)=000 E(SMoe)=000 F(PBKoe)=000
G(CLbi)=-02 H(SCLbi)=-03 I(C-SC)=+01 J(M-SM)=+01 K(BK-CL)=+01
L(BKbiPP)=-03 M(CLbiPP)=-02 N(SCLbiPP)=-03 O(NZctr)=000 P(NZedge)=000
TPAGE=00047 (TTL=00047COPY=00025)
PAGE(All=00038 PP=00035 HR+MP=00003 PR+SP+SG =00000 GP =00000 PC=00000 EV=00000)
UCPAGE(All=00083 PP=00035 HR+MP=00003 PR+SP+SG =00000 GP =00000 PC=00000 EV=00000)
CDPAGE(All=000) EDGE=00083 L=00000 BTPAGE=0000 CDR=00000
LG=01 Japanese SC=000 PrnB=000 Seal=000 CDI=004 CDP=006
CDD-MP(L=003 2L=002 PC=000 A4=000) DCD-PP(L=003 2L=002 PC=000 A4=000)
DCD-FPP(L=003 2L=002 PC=000 A4=000) DCD-MPP(L=003 2L=002 PC=000 A4=000)
SC=00026 SC-dpi(75=00000 150=00000 300=00001 600=00025 1200=00000 2400=00000 4800=00000)
MCASF(PP=00001 SP+PR+GP=00000 OTH=00000)
MCUF(PP=00001 SP+PR+GP=00000 OTH=00000)
CCASF(PP=00009 FR+MP=00000 PR+SP+SG=00006 GP=00000 PC=00000)
CCUT(PP=00004 FR+MP=00000 PR+SP+SG=00003 GP=00001 PC=00001)
Head TempBK=31.5 Head TempC=29.0 Env Temp=27.0 FF(80 00 17)
V0000 SN=0000-033C
LN(00000 00000 00001 00003 00001 00017 00015) ID=09
IL=(PBK=000 BK=000 Y=001 M=001 M2=001 C=000 C2=001)
<SCAN ERROR HISTORY>
Printed items:


This section describes the procedures for transporting the machine for returning after repair, etc.

likely to dry. For this reason, keep the print head installed in the machine even during transportation. (2) Securely lock the carriage in the home position, to prevent the carriage from moving and applying stress to the carriage
flexible cable, or causing ink leakage, during transportation. Memo: If the print head must be removed from the machine and transported alone, attach the protective cap (used when the packing was opened) to the print head (to protect the print head face from damage due to shocks).
To the table of contents To the top

TECHNICAL REFERENCE

(1) New ink tank system (PGI-5, CLI-8)
An LED is installed in each ink tank. By the LED indication, wrong installation of the ink tanks will be prevented, and the remaining ink level can be visually recognized with the ink tanks seated in the carriage. The combination of the new pigment-based black ink with higher resistance against bleeding or marker pens and the new dye- based inks with higher photo quality and weather resistance makes the new ink system strong in both photo and text printing.
(2) Super-photo quality printing
By the FINE technologies, 1 pl of ultra-fine ink droplet is adopted. The MP800 provides excellent super- photo print quality without graininess at the maximum resolution of 9,600 dpi x 2,400 dpi*1, which is equal to that of a 6-color machine. *1: Printing at the minimum distance of 1/9600 inch between the dots.
(3) High-speed print and copy
Approx. 36 sec. in 4 x 6 borderless printing (standard mode, Photo Paper Plus Glossy, full page, SCID No.2) For reference, 30 ppm in monochrome printing and 24 ppm in color printing at the highest print speed.
(4) New functionality in copy and Direct Printing
- Plain paper is now usable in Camera Direct Printing from a digital camera or digital video camera, if both support PictBridge.
(Settings button) - File numbers, shooting date, and shooting data (Exif) can be printed on the images. (Memory card mode) - Optimization of photos taken by a mobile phone:
Minimizes jaggies in printing a low-resolution photo taken by a mobile phone. (Wireless print settings menu, or memory card mode) - Slide show:
To the Single-photo print menu, the slide show function has been added to display photos from the memory card one by one automatically. (Memory card mode) - Red-Eye correction:
Selects red area from an image, and detects and corrects the red eye automatically. (Memory card mode) - Face brightener:
Perceives a person's face automatically and adjusts its brightness. (Memory card mode, or photo/film mode) - Index printing:
Printing like a 35 mm negative film is possible. (Memory card mode) - Sepia tone or illustration-simulated effects:
In Card Direct printing, the function to add a sepia tone to the photo or to make the photo look like a illustration has been added. (Memory card mode) - CD / DVD printing:
Direct printing from a memory card on a CD or DVD is available. (Memory card mode) - CD / DVD label copy:
A CD or DVD label can be copied directly to another CD or DVD. (Copy mode) - 4-on-1 copy:
Four documents can be copied on a single sheet by automatically reducing the original documents. (Copy mode)
Offers friendliness, robustness and looks which do not overwhelm by its size as the traditional MFP does.
(6) High-definition 3.5 color STN LCD
The 3.5-inch color STN LCD offers higher visibility than the conventional models to improve usability (320 x 240 pixels, approx. 65,000 colors).
(7) 1,200 x 2,400 dpi high-resolution CCD scanner and FAU supported
High-definition film scanning of color negative film, black and white negative film, color positive film, and mount film is possible using FAU (Film Adapter Unit). (Continuous scanning: 6 sleeves, or 4 slides)
(5) Friendly design

(8) Printing via Bluetooth communication (optional)
The Bluetooth Unit BU-20 is available as an option. Adopting a compatible USB adapter, the BU-20, when attached to the machine, enables wireless printing from a Bluetooth- compliant computer or mobile phone.
To the table of contents To the top

To prevent printing problems due to bubbles, dust, or ink clogging, print head cleaning is performed before the start of printing (when the cleaning flag is on), except in the following cases:
- Cleaning on arrival: Performed when the scanning unit (printer cover) is closed. - Manual cleaning / deep cleaning: Performed manually.
Amount of ink used
Est. required time
(g) (in the normal temperature/humidity
(sec.) (not including the time of opening the
On arrival of the machine
First to third cleaning after shipped from the plant*1.
0.57 (Black)
2.25 (Color)
When the specified number of dots are printed since the previous Black cleaning.
0.20 (Black) 35 (Black)
Timer cleaning - 0*2
If 24 to 60 hours have elapsed since the previous Black cleaning till the start of the next printing.
0.20 (Black) 35 (Black)
Timer cleaning - 1
If 60 to 96 hours have elapsed since the previous Black cleaning till the start of the next printing.
Timer cleaning - 2
If 96 to 120 hours have elapsed since the previous Black cleaning till the start of the next printing.
Timer cleaning - 3*3
If 120 to 336 hours have elapsed since the previous Black/Color cleaning till the start of the next printing.
0.20 (Black)
0.66 (Color)
Timer cleaning - 4
0.57 (Black)
If 336 to 504 hours have elapsed since the previous Black/Color cleaning till the start of the next printing.
1.06 (Color)
Timer cleaning - 5
If 504 to 720 hours have elapsed since the previous Black/Color cleaning till the start of the next printing.
Timer cleaning - 6
If 720 to 1,080 hours have elapsed since the previous Black/Color cleaning till the start of the next printing.
Timer cleaning - 7
If 1,080 to 2,160 hours have elapsed since the previous Black/Color cleaning till the start of the next printing.
1.27 (Black)
1.06 (Color)
Timer cleaning - 8
1.95 (Black)
If 2,160 to 4,320 hours have elapsed since the previous Black/Color cleaning till the start of the next printing.
1.06 (Color)
Timer cleaning - 9
If 4,320 to 8,640 hours have elapsed since the previous Black/Color cleaning till the start of the next printing.
1.95 (Black)
1.06 (Color)
Timer cleaning - 10
If 8,640 or longer hours have elapsed since the previous Black/Color cleaning till the start of the next printing.
At print head replacement
When the print head is removed and installed. 0.57 (Black)
2.25 (Color)



3-1. Normal Color Printing via Computer

3-2. Normal Grayscale Printing via Computer

3-3. Borderless Printing via Computer


3-4. Duplex Printing via Computer

3-5. Camera Direct Printing

3-6. Card Direct / Photo Direct / Wireless Printing
Print quality in wireless printing is fixed to Standard.
(Selectable paper types in wireless printing: Plain paper, Photo Paper Pro, Photo Paper Plus Glossy, Matte Photo Paper, and Glossy Photo Paper)

3-7. Copying


To the table of contents To the top


To the table of contents To the top

No. * Function Phenomenon Condition Cause Corrective action Possible call or
- Paper feeding from the
Due to its mechanism, contact of the PF pinch rollers to the 5 x 7 size paper is uneven, which is likely to cause skewed paper feeding.
Change the paper feeding method from the cassette to the auto sheet feeder.
- Paper feeds at
cassette, Photo Paper Plus Double Sided, 5 x 7 size
an angle.
1 B Print results
appears on printouts.
Improper paper feeding:
- Paper feeding from the
In the high temperature and high humidity environment, paper becomes wavy; in the low temperature and low humidity environment, paper curls significantly.
- Reduce the amount
of paper set in the ASF to half (approx. 5 mm high).
of paper feed at the same time.
- Paper feeds at
- Highest print speed
(Custom setting to 5)
an angle.
- A paper jam
- In the high temperature
and high humidity environment
occurs.
2 B Paper feed
When the maximum amount of paper is set in the ASF, and if the paper-return tab fits in a wave or curl of the paper, the tab slips and does not catch paper properly, causing paper feed problems.
- In the low temperature
and low humidity environment
- With the maximum
amount of paper set (13 mm)
Skewed paper feeding (at the level of +/- 1%)
- Paper feeding from the
Since coaxial tolerance between the pinch roller and the LF roller, which determines the paper feed alignment, is 0.2mm, skewed paper feeding can occur. However, according to the field data of current models, the skewness level caused by the coaxial tolerance of 0.2mm is within the criteria of +/- 1%, thus the phenomenon is left as is.
- Align the paper
- Paper feeds at
guide to the paper edge tighter than usual.
an angle.
- Credit Card size
appears on printouts.
3 C Print results
Soiling on the back side of paper (lines or streaks parallel to the paper feed direction)
In borderless printing, printing is performed to the size slightly larger than the paper size, and ink off the paper is absorbed by the platen's ink absorber. Absorbed ink may attach to the platen rib(s) after several dozen sheets are printed, causing soiling at the leading edge of paper or on the back side of paper.
borderless printing of small sized paper (such as 4 x 6), when a larger sized paper (such as A4) is printed.
smeared.
- The back side of
paper gets smeared.
- With Photo Paper Plus
4 A Print results
Double Sided or postcards, the phenomenon is likely to be noticeable and to be complained of by users, as printing is performed on both sides of such paper.
Soiling on paper in automatic duplex printing (lines or streaks
On the rib(s) inside the sheet feed unit used for duplex printing, ink mist
printing (Photo Paper Plus Double Sided, postcards, plain paper)
smeared.
- The back side of

perpendicular to the paper feed direction)
may accumulate, smearing paper.
duplex printing, and manually print each side of paper.
smeared.
Bottom plate cleaning was performed, and the platen ribs were cleaned with cotton swab, paper gets smeared.
Cleaning by user:
5 B Print results
If the phenomenon persists after conducting 1 and 2, servicing is required.
Service:
Wipe any soiling or dirt off from the sheet feed unit and the bottom case unit ribs*2.
Scratches on the PF return lever due to paper feeding from the cassette, and duplex printing path.
- Change the paper
101, SG-101, etc.
feeding method from the cassette to the auto sheet feeder.
scratched.
- Paper feeding from the
on printed paper.
- If automatic duplex
printing is performed, cancel it, and, by setting only a single sheet of paper in the auto sheet feeder, manually print each side of paper.
6 C Print results
When multiple sheets of paper are set, the back side of paper being picked up scratches the front side of paper beneath (especially where the paper feed rollers contact when picking up the paper).
Set only a single sheet of paper in the auto sheet feeder.
101, SG-101, etc.
- Paper feeding from the
- Multiple number of
Soiling on paper The machine has been used for a long period of time with the ASF cover closed before printing is performed using the ASF.
Due to ink mist attached to the ASF sub-pick-up rollers.
Clean the ASF sub- rollers (see *3 for details).
If printing is done from the cassette with the ASF cover closed, ink mist is kept inside the machine, attaching to the ASF sub-pick-up rollers.
7 C Print results

Since the sub-rollers usually do not contact the paper, ink mist can easily accumulate, especially during printing on small- sized paper which never contacts the sub-rollers.
When 10 sheets of paper are set in the ASF, and if they warp significantly, the warping portions of paper get over the cover guide, not being aligned along the guide properly.
- Paper feeds at
paper.
an angle.
- Paper feeding from the
- Set 5 or less sheets
8 B Print results
of paper in the ASF.
appears on printouts.
- 10 sheets (max.) set in
Uneven printing at the trailing edge of paper
- In the low temperature
Due to decrease of the friction coefficient and inaccurate print head alignment.
and low humidity environment
print head alignment. - Perform Bottom
at the bottom of the paper.
9 B Print results
plate cleaning.
Print smeared - When the inner cover
When printing on paper is done with the inner cover open, the print immediately after ink is ejected on paper is scratched by the bottom of the inner cover, resulting in smeared print.
Close the inner cover completely.
smeared.
is not completely closed. - High-density image
10 B Print results
Spots on a scanned image
- Glossy photo (original) - In the high humidity
When a glossy photo is strongly pressed on the platen glass, the photo will stick to the glass, and the stuck points are scanned as spots.
- Do not strongly
- Spots appear on
press the photo on the platen glass. - Clean the platen
the scanned image, though there is no such spots on the original document.
11 A Image scanning
glass (to eliminate any moisture).
Improper trimming in Layout print (orientation difference of an image between the LCD and a printout)
- Card Direct printing - Photos taken with a
For photos in general, both the thumbnail and the original image are in landscape. However, when original images are in portrait while thumbnails are in landscape, the trimming frame shifts from the correct position in some instances.
The phenomenon is left as is.
differs from what is displayed on the LCD.
12 C Display on
Improper area of cropping, or skewed scanning
- Scanning using MP
Due to a bug in MP Navigator 2.0. Since the automatic cropping process is incorrect, improper correction of skewed scanning is done depending on a document, resulting in the skewed scanning.
- An image is
Navigator - MP Navigator settings:
sheet regarding the phenomenon is packed with the machine in early production. - MP Navigator will
scanned at an angle. - Some portions
Document type:
of an image is not scanned.
Black and white document, or color document Document size:
13 A Image scanning
be upgraded on a running-change basis. - If the phenomenon
occurs, cancel "auto detect" and select the paper

size (the full paper
size). Trim margins (white area along the edges of the scanned image), if any.
*1: Change the paper in each Bottom plate cleaning. The cleaning can end when paper does not get any soiling.







* Occurrence level:
A: The symptom is likely to occur frequently. (Caution required) B: The symptom may occur under certain conditions, but likeliness is assumed very low in practical usage. C: The symptom is unlikely to be recognized by the user, and no practical issues are assumed. To the table of contents To the top

APPENDIX

Type Desktop serial color inkjet printer
Paper feeding method Auto sheet feed (ASF, cassette, automatic duplex printing, CD / DVD printing*1)
Resolution 9,600 x 2,400dpi (Max.)
- 4 x 6, borderless printing: Approx. 36 sec. (standard mode, PP-101, Full Page SCID No. 2) For reference:
Fast Standard Black (Fine Black) 30ppm 15.0ppm Color (Fine Color) 24ppm 11.7ppm
Printing direction Bi-directional, uni-directional
Print width Max. 203.2mm (216mm in borderless printing)
Interface USB 2.0 Hi-Speed
Cassette stacking capacity Plain paper: Max. 13mm (Approx. 150 sheets of 64g/m2 paper) (Photo Stickers and Credit Card size not supported)
Paper weight 64 to 105g/m2
Scanning unit open, Presence of print head / ink tanks, Opening / Closing of paper output tray, Remaining ink amount (optical / dot count), Opening / Closing of inner cover, Printing position, Paper presence, Paper end sensor, Waste ink amount, Internal temperature, Pick-up roller, Paper feed roller position, Carriage position, Head-to-paper distance, Supported camera direct printing device, Presence of CD / DVD*1, Scanner home position
Acoustic noise (Highest print quality)
During operation Temperature 5C to 35C (41F to 95F) Humidity 10%RH to 90%RH (no condensation) Non operation Temperature 0C to 40C (32F to 104F) Humidity 5%RH to 95%RH (no condensation)
Power supply voltage, frequency Power consumption Standby Power-off AC 100 to 120V, 50/60Hz Approx. 20W Approx. 2.0W Approx. 0.8W AC 220 to 240V, 50/60Hz Approx. 20W Approx. 2.0W Approx. 0.8W
External dimensions Machine:
With the paper support and output tray retracted: Approx. 470 (W) x 490 (D) x 240 (H)mm
Weight Approx. 12.0kg, not including print head and optional units
Electromagnetic radiance:
VCCI, FCC, IC, CE Mark, Taiwan EMC, C-Tick, CCC (EMC), Korea MIC, Gost-R Electrical safety:
Related standards (Machine, Adapter)
Electrical Appliance and Material Safety Law (DENAN), UL, C-UL, CB Report, CE Mark, GS, Gost-R, FT, SASO, CCC, SPRING, Korea EK, IRAM (Argentine)
Environmental regulations:
RoHS (EU), WEEE (EU), Korea Package Recycle Law, Green Point (Germany), Energy Star, Eco Mark, Law on Promoting Green Purchasing
Serial number location On the carriage flexible cable holder (visible when the scanning unit is open)
Remaining ink amount detection Available (automatic detection by optical method and dot count, enabled at default)
Paper type detection Not available
Print head alignment Available (automatic or manual alignment via MP driver Maintenance, or via the operation panel button)
Type Flat bed scanner (scanning of a fixed document by a moving scanner head)
Sensor type CCD (Charge Coupled Device): 2,400 dpi / 600 dpi dual

Optical resolution 2,400 x 4,800 dpi (max.)
Scanning resolution (software interpolation) 19,200 x 19,200 dpi (max.)
Grayscale: 48 bit / 8 bit (Film scanning: 48 bit / 16 bit, or 48 bit / 8 bit) Color: 48 bit / 24 bit (RGB each color 16 bit / 8 bit) (Film scanning: 48 bit / 48 bit, or 48 bit / 24 bit)
Document size A4 / LTR (max.)
Copy quality 3 levels (Fast, Standard, High)
Intensity 9 levels (automatic intensity adjustment available)
Enlargement / reduction Preset ratio:
max. (400%), 4x6 -> 8.5x11 (212%), 5x7 -> 8.5x11 (170%), A5 -> A4 (141%), B5 -> A4 (115%), 100%, A4 -> 8.5x11 (95%), A4 -> B5 (86%), A4 -> A5 (70%), min. (25%) Zoom:
25 to 400% (in increments of 1%)
Document size A4 / LTR (max.)
Number of continuous copies Monochrome / color: 1 to 99 copies
Type Single head with 5 removable ink tanks (each color)
Pigment-based BK:
512 nozzles, 600 dpi, 30 pl Dye-based BK / C / M / Y:
512 x 6 nozzles, 1,200 dpi, 1 pl / 5 pl (C / M), 5 pl (BK / Y)
Ink color Pigment-based black
Dye-based black, cyan, magenta, yellow
Ink tank PGI-5BK (pigment-based), CLI-8BK / C / M / Y (dye-based)
Weight (Net) Print head, approx. 60g
Supply method As a service part (not including ink tanks)
Pigment-based ink Dye-based ink
BCI- 9BK PGI- 5BK BCI- 7eBK BCI-
7eC BCI- 7eM BCI- 7eY CLI- 8BK CLI-
8M CLI-
8Y
PIXUS MP800 Japan O X O X
X O X O
O: Usable
X: Not usable Note: The ink tanks for the Japanese models are not compatible with those for the non-Japanese models. Be sure to use the
appropriate ink tanks in servicing.
Compact Flash TYPE I/II (3.3V), Microdrive, SmartMedia Card (3.3V only), Memory Stick, Memory Stick PRO, SD Card, MultiMedia Card, xD-Picture Card, miniSD memory card, Memory Stick Duo*, Memory Stick PRO Duo*
Memory card drive Supported memory card
Operation Via the machine buttons.

Condition Before changing the settings, the memory card must be removed.
Function Read / Write
Operation panel 3.5 color LCD, 20 buttons, 7 LEDs
File format JPEG (DCF, CIFF, Exif 2.21 or prior, JFIF), DPOF compliant
Print quality Standard, High
Image correction function Photo Optimizer PRO, VIVID, noise reduction, face brightener, image optimizer
Image adjustment function Brightness, contrast, hue (skin tones)
Image processing function None
Image retrieval function Available (date)
Ver. 1.00 compliant Index printing, printing of an image the specified number of copies, printing of the specified image(s), printing with the shooting date
Single-photo/multi-photo/all-photo printing:
1 photo per page (borderless/with borders, only with borders for plain paper)
DPOF printing:
1 photo per page (borderless/with borders) 6, 15, 24, 35, 80 photos per page 30 photos per page (panorama)
Index printing:
6, 15, 24, 35, 80 photos per page 30 photos per page (panorama)
Layout printing:
2, 4, 8 photos per page (borderless/with borders) Postcard (borderless/with borders, with/without lines) Album (4 photos per page, right/left) Mix 3 types (for A4/LTR)
Sticker printing:
2, 4, 9, 16 stickers 1, 5, 6, 7 stickers (for free-cut)
Information print Date, file number, Exif information
Approx. 55.9 seconds, with the following conditions and settings:
- Photo Paper Plus - 4 x 6 borderless - A photo from a 5 mega-pixel digital camera - Exif print - Standard print quality - Process from pressing the printing start button to ejecting paper
Digital cameras and digital video cameras supporting Bubble Jet Direct or PictBridge
Print layout - 1 photo per page (borderless/with borders) - 2, 4, 9, 16 photos per page
Information print Date, file number
Approx. 54 seconds, with the following conditions and settings:
- Photo Paper Plus - 4 x 6 borderless - A photo from a 5 mega-pixel digital camera - No image correction - Exif print - Standard print quality - Process from pressing the printing start button to ejecting paper

Mobile phone equipped with IrDA 1.2 port, or with Bluetooth 1.2 port
Printable data Image (JPEG only, text printing not possible)
Supported layout 1, 2, 4, 8 images per page (borderless) 1, 2, 4, 5, 6, 7, 8, 9, 16 images per page (bordered)
Standard Bluetooth version 1.2
Output Bluetooth Power Class 2
Communication range Good for approx. 10 m in radius (depending on interference between the communication devices, or radio wave conditions)
Frequency band 2.4GHz
Communication speed Approx. 720kbps
Supported profile BIP, OPP, SPP, HCRP
Supported OS for HCRP
- Windows XP Service Pack 2 or later - Windows XP Service Pack 1 or later:
Microsoft "Support for Bluetooth Wireless Devices" or Toshiba Bluetooth Stack for Windows Ver. 3.00.10 or later has to be installed - Mac OS X 10.3.3 or later
Printing via Bluetooth communication (optional BU-20)
18.5 (W) x 47.5 (D) x 8.7 (H) mm with a cap
BU-20 weight Approx. 7g
BU-20 power supply voltage
4.4 to 5.25V
500mW (max.)
5C to 35C (41F to 95F)
10%RHto 90%RH (no condensation)
* Adapter required.
To the table of contents To the top
What the fault codes shown on the display mean and how to clear them.
| Code | Meaning | Fix | |
|---|---|---|---|
| 2 times | - Carriage unit - Timing slit film - Logic board ass'y - Carriage motor | p.12 | |
| 3 times | - Timing sensor unit - Timing slit disk film - Feed roller ass'y - Platen unit - Logic board ass'y - Paper feed motor | p.12 | |
| 4 times | - Purge unit - Logic board ass'y | p.12 | |
| 5 times | - Sheet feed unit | p.12 | |
| 6 times | - Logic board ass'y | p.12 | |
| 7 times | - Ink absorber kit | p.12 | |
| 8 times | - Print head - Logic board ass'y | p.12 | |
| 9 times | - Logic board ass'y | p.12 | |
| 11 times | - PR lift shaft ass'y - Sheet feed unit - Logic board ass'y - Carriage lift sensor unit | p.12 | |
| 12 times | - Sheet feed unit - Logic board ass'y - Purge unit | p.12 | |
| 13 times | - Sheet feed unit - Logic board ass'y | p.12 | |
| 14 times | - Sheet feed unit - Logic board ass'y | p.12 | |
| 15 times | - Logic board ass'y | p.12 | |
| 16 times | - Logic board ass'y - Purge unit | p.12 | |
| 17 times | - Logic board ass'y | p.12 | |
| 19 times | - Platen unit - Logic board ass'y | p.12 | |
| 20 times | - Logic board ass'y | p.12 |
Common problems, likely causes, and what to do.
| Problem | Possible cause | Remedy | |
|---|---|---|---|
| The power does not turn on. The power turns off immediately after power-on. | - Confirm the connection of - the power cord, and - between the logic board and the power supply unit. - Replace the - AC adapter, or - logic board ass'y. | p.15 | |
| A strange noise occurs. | - Remove foreign material. - Attach a removed part if any. - Check the operation of the moving parts (such as purge unit, carriage unit, and paper feeding mechanism) - Replace a faulty part, if any. | p.15 | |
| Nothing is displayed on the LCD. | - Confirm the connection between the operation panel, the scanner unit, and the logic board. - Replace the - LCD, or - logic board ass'y. | p.15 | |
| A portion of the LCD is not displayed. | - Perform the button and LCD test in the service mode, and confirm that the LCD is displayed without any segments missing. - Confirm the connection between the operation panel, the scanner unit, and the logic board. - Replace the - LCD, or - logic board ass'y. | p.15 | |
| Paper feed problems (multi-feeding, skewed feeding, no feeding) | - Examine the inside to confirm that no parts are damaged, and the rollers are clean. - Remove foreign material. - Adjust the paper guide properly. - Confirm the connection of each harness and the logic board. - Replace the - sheet feeder unit, - cassette, or - logic board ass'y. | p.15 | |
| - Paper feeding from the cassette, Photo Paper Plus Double Sided, 5 x 7 size | Due to its mechanism, contact of the PF pinch rollers to the 5 x 7 size paper is uneven, which is likely to cause skewed paper feeding. | Change the paper feeding method from the cassette to the auto sheet feeder. | p.53 |
| - Paper feeding from the ASF - Plain paper - Highest print speed (Custom setting to 5) - In the high temperature and high humidity environment - In the low temperature and low humidity environment - With the maximum amount of paper set (13 mm) | In the high temperature and high humidity environment, paper becomes wavy; in the low temperature and low humidity environment, paper curls significantly. When the maximum amount of paper is set in the ASF, and if the paper-return tab fits in a wave or curl of the paper, the tab slips and does not catch paper properly, causing paper feed problems. | - Reduce the amount of paper set in the ASF to half (approx. 5 mm high). | p.53 |
| - Paper feeding from the ASF - Credit Card size | Since coaxial tolerance between the pinch roller and the LF roller, which determines the paper feed alignment, is 0.2mm, skewed paper feeding can occur. However, according to the field data of current models, the skewness level caused by the coaxial tolerance of 0.2mm is within the criteria of +/- 1%, thus the phenomenon is left as is. | - Align the paper guide to the paper edge tighter than usual. | p.53 |
| - After continuous borderless printing of small sized paper (such as 4 x 6), when a larger sized paper (such as A4) is printed. - With Photo Paper Plus Double Sided or postcards, the phenomenon is likely to be noticeable and to be complained of by users, as printing is performed on both sides of such paper. | In borderless printing, printing is performed to the size slightly larger than the paper size, and ink off the paper is absorbed by the platen's ink absorber. Absorbed ink may attach to the platen rib(s) after several dozen sheets are printed, causing soiling at the leading edge of paper or on the back side of paper. | 1. Perform Bottom plate cleaning (from the MP driver or via the operation panel) up to 3 times*1. 2. If soiling on the paper still remains after 3 times of Bottom plate cleaning, wipe the platen rib(s) and their surroundings with a cotton swab. | p.53 |
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.