EN
Canon logo
Official user manual

Canon MP600

2 pages·5.8 MB·All in One Printer·PDF·ENDEFRITNLJA
Canon MP600
Table of Contents 33 sections Start Here Easy Setup Instructions · Photo All-in-One · Unpack the Machine · QT5-0683-V02 · … ShowHide
Page 1 of the Canon MP600 user manual — OK
Page 1 · click to enlarge
Page 1

Start Here Easy Setup Instructions

Photo All-in-One

Unpack the Machine

  • Please confirm the included items against the illustration printed on the lid of the packing box.
  • A USB cable is necessary to connect the machine with your computer.

QT5-0683-V02

1 Prepare the Machine 2 Install the Print Head 3 Install the Ink Tanks 4 Align the Print Head

Hardware setup and Print Head alignment is complete. a Place the machine on a flat and

d Use the { or } button on the

a Remove the Print Head from its

a Peel back the orange tab completely

a Pinch the Paper Guide and slide it to

horizontal surface, and do not place any objects in front of the machine. Open the Sheet Feeder Cover and pull the Paper Support, then the Paper Output Tray and open the Output Tray Extension.

Operation Panel to select the language for the LCD, then press the OK button.

package.

and remove the plastic wrapper from the ink tank.

the left end.

If the orange-colored protective film is not removed completely, problems with printing may occur.

(1) Press the { or }

button to select the language.

b Twist off and discard the orange

protective cap located on the bottom of the ink tank.

(2) Press the OK

button.

Protective Cap Do not press!

b Remove the orange protective cap from

the Print Head and discard it.

Once the message “Install the print head and set the ink tank.” appears, go to e.

b Load a sheet of letteror A4-sized

  • Important
  • Do not touch the electrical contacts.
  • Do not touch the ink port.

blank paper in the Auto Sheet Feeder, align the paper with the right side of the Cover Guide, then slide the Paper Guide against the paper stack.

e Open the Scanning Unit (Printer Cover)

until it locks into place. The Print Head Holder moves to the center.

c Insert the ink tank into the right-hand

b Plug the power cord in the back of the

Protective Cap Print Head Nozzles

slot and press the mark on the ink tank until it clicks into place.

machine and connect the other end to the wall outlet.

until it stops.The Print Head Lock Lever may feel heavy.

Scanning Unit (Printer Cover)

Easy-Scroll Wheel

Turn the Easy-Scroll Wheel left or right to easily select a menu or a setting item. For details, refer to “Basic Operation for the Operation Panel” in the Quick Start Guide.

c Make sure that Yes is selected in the

message requesting head alignment, then press the OK button.

d Make sure the ink lamp lights red.

the ON/OFF button to turn on the machine.

d Insert the Print Head.

Refer to the color guide on the Print Head Lock Lever.

* You can also use the {, }, [, or ] button to select.

f Open the Inner Cover. Write down

the serial number located inside the machine. You will need this to register your product.

e Close the Inner Cover and the

e Lower the Print Head Lock Lever

Scanning Unit (Printer Cover).

carefully.

The pattern is printed. And Print Head is aligned automatically.

OK

Cassette

Inner Cover Serial Number Location

For information on how to load paper in the Cassette, refer to “Loading Paper in the Cassette” in “Loading Printing Paper” of the Quick Start Guide.

  • Note
  • The pattern is printed in black and blue.
  • When Automatic Print Head Alignment cannot be executed correctly, the message “ Auto head align has failed. ” is displayed on the LCD. Refer to “Error Message is Displayed on the LCD” in the User’s Guide on-screen manual.
  • Important
  • For your safety, always firmly grip the areas illustrated when closing the Scanning Unit (Printer Cover).
  • The machine starts operating. Wait about 2 minutes until the machine stops making noise.
Show 10 more labels / short text on this page
Paper Support · Extension · Paper Guide · Ink Port · Electrical Contacts · Electrical Contacts · Paper Guide · Print Side · Cover Guide · Do not touch!
Page 2 of the Canon MP600 user manual — i When the Installation completed successfully screen
Page 2 · click to enlarge
Page 2

Windows ® MP Drivers Installation

Macintosh ® MP Drivers Installation

Macintosh

Windows

  • Note
  • The screens below refer to Windows XP Service Pack 2 installation. Screens may vary depending on the operating system you are using.
  • For Windows XP or Windows 2000, log on to Windows as a member of the Administrators group before continuing.
  • Before installing the driver, disable all anti-virus programs and automatically loading programs. a Turn off the machine.

f Read the License Agreement carefully and click Yes.

g When the list of applications to install appears, confirm the

Follow the on-screen instructions to install the software. If a message asking for your confirmation to restart your computer appears, click OK.

contents, then click Install.

  • Note
  • Use Mac OS X v.10.2.8 to 10.4.x.
  • The screens below refer to Mac OS X v.10.4.x installation. Screens may vary depending on the operating system you are using.
  • Log on as an Administrator before continuing.
  • Before installing the driver, disable all anti-virus programs and automatically loading programs.

h Read the License Agreement carefully and click Yes.

g When the Printer Connection screen appears, connect the

Follow the on-screen instructions to install the software.

machine with a USB cable, then turn the machine on. The software will begin identifying the printer port being used.

i Follow the on-screen instructions to register your product.

(1) Press the ON/OFF button.

(2) Make sure that the POWER lamp stops flashing.

a Connect one end of the USB cable to the computer, the

other to the machine.

b Turn the computer on and start Windows.

Canon MP600 — a Connect one end of the USB cable to the computer, the diagram (page 2)
Fig. 1 · a Connect one end of the USB cable to the computer,…

j When the Installation completed successfully screen

appears, click Restart.

Canon MP600 — j When the Installation completed successfully screen diagram (page 2)
Fig. 2 · j When the Installation completed successfully scree…
Canon MP600 — j When the Installation completed successfully screen diagram (page 2)
Fig. 3 · j When the Installation completed successfully scree…

b Turn on your Mac.

The system is restarted automatically.

c Insert the Setup CD-ROM.

c Insert the Setup CD-ROM. The setup program should run

*When using Mac OS X v.10.2.8 to v.10.3.3: Restarting the computer while connected to the machine may cause the machine not to be detected. To resolve this, either unplug the USB cable then plug it back in again, or turn the machine off then back on again.

automatically.

on the desktop. d Double-click the Setup icon.

. d When the main menu appears, click Easy Install.

k After restarting the computer, start Printer Setup Utility

e When the Authenticate screen appears, enter your

h Follow the on-screen instructions to register your product.

(start Print Center if you are using Mac OS X v.10.2.8) and then check that the printer name you want to use is shown in Printer List. If the printer name is not displayed, click Add to add the device. For more detailed instructions, refer to the Mac on-screen Help.

administrator name and password. Click OK. If you do not know your administrator name or password, click

Canon MP600 — k After restarting the computer, start Printer Setup Utility diagram (page 2)
Fig. 4 · k After restarting the computer, start Printer Setup…

, then follow the on-screen instructions.

Canon MP600 — k After restarting the computer, start Printer Setup Utility diagram (page 2)
Fig. 5 · k After restarting the computer, start Printer Setup…

i When the Installation completed successfully screen

appears, click Exit.

Now you have completed installation of the software.

Canon MP600 — i When the Installation completed successfully screen diagram (page 2)
Fig. 6 · i When the Installation completed successfully scree…
  • Note
  • Select Easy Install in order to install the MP Drivers, on-screen manuals, and application software. Select Custom Install in order to choose the options you would like to install.
  • To install Adobe ® RGB (1998), click Custom Install and follow the on-screen instructions. If you are using Windows Me/98, Adobe RGB cannot be installed. e When the list of applications to install appears, confirm the

f When the main menu appears, click Easy Install.

Canon MP600 — i When the Installation completed successfully screen diagram (page 2)
Fig. 7 · i When the Installation completed successfully scree…

If Restart is displayed, make sure that the Restart the system now (recommended) check box is selected, then click Restart.

contents, click Install.

Now you have completed installation of the software.

Part no. QT5-0683-V02 © 2006 Canon Inc. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries. Macintosh and Mac are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. Adobe and Adobe RGB (1998) are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. All other product and brand names are trademarks of their respective owners. Specifications subject to change without notice. Printed in Thailand.

Ask about the Canon MP600

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Canon MP600

Be the first to ask — other owners or our team will answer.

Original document

Canon MP600 manual PDF

2 pages·5.8 MB·All in One Printer·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…