

Back On Your Network After A Router Or Network Change
PIXMA MP495
Windows OS

If any of the following situations exist, you will need to Uninstall and Re-Install the MP Drivers

to Your Network
Windows OS
Uninstalling the Multifunction Drivers 4 Preparing to Connect My Multifunction to My Network 6 Network Requirements 6 Notes on Wireless Connection 7 Installing the Drivers & Software 8

antivirus programs and firewalls before beginning.





Network Requirements Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network.

Wireless Connection Before connecting the machine to the network, the computer needs to be connected to the network. Make sure that configuration of the computer and access point or router is complete.



An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without using an access point, is not supported.

To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. The installation process takes about 20 minutes. (The installation time varies depending on the computer environment or the number of application software to be installed.)

If you connect the machine via wireless LAN setup cable before installing the software:
For Windows 7

Do not connect the USB cable yet. Software installation requires temporary use of the USB cable.

Step Two
Turn on the computer, then insert the Setup CD- ROM into the CD-ROM drive. If you are using Windows, the setup program starts automatically.
Click Run Msetup4.exe on the AutoPlay screen, then click Yes or Continue on the User Account Control dialog box.
If the User Account Control dialog box reappears in following steps, click Yes or Continue.


Step Four
The drivers, application software, and on-screen manuals are installed.


If you want to select particular items to install, click Custom Install.
Click Easy Install · Click Install

Step Six
Select Use the printer on network, then click Next.
Easy-WebPrint EX is Web print software that is installed on the computer when installing the supplied software. Internet Explorer 7 or later is required to use this software. An Internet connection is required for installation.


Select Next or Skip. Selecting Next will download and install the Easy-WebPrint EX software.

Step Eight
When the Printer Detection screen appears, click Next.
Make sure the machine is turned on, then click OK.



Follow on-screen instructions and proceed with the installation. Click Exit on the installation complete screen, then start again from 2 and be sure to select Use the printer on network in 5.

Step Ten
When the Set Up New Printer screen appears, click Next.
When the Connect Cable screen appears, connect the machine to the computer with the wireless LAN setup cable




If the Detected Access Points List screen appears, select the target access point name/network name (SSID), enter the network key and click Connect
If the Confirm Connection Access Point screen appears, make sure that the target access point is displayed,then click Yes.



Step Thirteen
When the Disconnect Cable screen appears, remove the wireless LAN setup cable, then click Next.
Click Complete on the Setup Completion screen.


Wireless setup is now complete

Step Fifteen
Click Next on the Print Head Alignment Recommended screen.
Click Next on the Setup Complete screen. At this point, setup is complete.



If the Extended Survey Program screen appears: If you can agree to Extended Survey Program, click Agree. If you click Do not agree, the Extended Survey Program will not be installed. (This has no effect on the machine's functionality.).
If the User Registration screen appears, read the information and click Next or Cancel



Step Seventeen
Click Exit.

Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.