
2 Prepare the FINE Cartridges.
Thank you for purchasing the Canon PIXMA MP170/MP150. To prepare your machine for use, please follow these Easy Setup Instructions before referring to any other documentation.
Remove the protective tape.
1 Unpack the machine.
3 Insert the FINE Cartridges.
1 Carefully remove all items from the box. 2 Check the package contents.
4 Close the Scanning Unit.
2 Connect the power cord.
1 Connect the power cord. 2 Press [ON/OFF] to turn ON the machine.
4 Load the paper.
1 Open the Paper Support (1) and pull up the Paper Support Extension (2) until it stops. 2 Load the paper with the print side face up.
3 Use [ ] or [ ] on the Operation Panel to select the language on the LCD, then press [OK]. (MP170)
3 Install the FINE Cartridge.
1 Lift the Scanning Unit and pull the Scanning Unit Support down into place.
The cartridge moves to the left.
Install the FINE Cartridges here.
The hardware setup is complete.
If you are connecting the machine to a computer for use, see the reverse side for instructions on installing the software.
© 2005 Canon Inc. All products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change without notice.
QT7-0006-V03 xx2005A © CANON INC. 2005 PRINTED IN VIETNAM

Install the software.
The following software programs are included on the Setup CD-ROM:
Select Easy Install in order to install the application software, On-screen Manual and MP drivers. Select Custom Install in order to choose the options you would like to install. This sheet explains Easy Install only.
On-screen Manual MP Drivers MP Navigator
Easy-PhotoPrint ScanSoft OmniPage SE ArcSoft PhotoStudio
The following software programs are included on the Setup CD-ROM:
On-screen Manual MP Drivers MP Navigator
Easy-PhotoPrint Easy-WebPrint ScanSoft OmniPage SE
1 Turn ON your computer, and start Mac OS X. 2 Insert the Setup CD-ROM into the CD-ROM drive. 3 Double-click [Setup] on the Setup CD-ROM, or click [Setup] on the Setup CD- ROM and click [File] menu and then select [Open].
Account. 1 Enter the name for the Administrator. 2 Enter the password and then click [OK].

1 Turn OFF the machine. 2 Turn ON your computer, and start Windows. 3 Insert the Setup CD-ROM into the CD-ROM drive.

z Perform the following steps.
1 Select the language to use with this CD-ROM and then click [Next].
2 Select your place of residence and then click [Next].


1 Select the language to use with this CD-ROM and then click [Next].
2 Select your place of residence and then click [Next].
1 Click [Easy Install], then click [Install].




1 Click [Easy Install], then click [Install].
2 Click [Yes].
3 Click [Restart] to restart your computer.




2 Read the License Agreement, then click [Yes]. • Installation begins. Follow the displayed instructions.
US only • When the Registration window appears, follow the on-screen instructions to ensure product support. The serial number is located inside the machine. (See “3 Install the FINE Cartridge.” on the reverse side of this sheet)
1 When the [Printer Connection] appears, connect the machine to the computer with the USB cable. 2 Turn ON the machine.
* When connecting from Mac OS X v.10.3.3 or earlier: Restarting the computer while connected to the machine may cause the machine not to be detected. To resolve this, either unplug the USB cable then plug it back in again, or turn the machine OFF then back ON again.
In Windows 2000, the machine may not be set as the default printer. 3 Click [Exit].
z Perform the following to make sure the driver has been installed correctly.

You now have completed installation of the software.
US only • When the Registration window appears, follow the on-screen instructions to ensure product support. The serial number is located inside the machine. (See “3 Install the FINE Cartridge.” on the reverse side of this sheet)
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.