
Unpack the Machine
2 Install the FINE Cartridges
d Plug the Power Cord in the back of the machine and connect the
a Remove the Black FINE Cartridge from its box.
d Push up the FINE Cartridge until it clicks into place.
other end to the wall outlet.
a Place the machine on a flat and horizontal surface, and do not
place any objects in front of the machine.
b Remove the Protective Tape gently.
will initialize. Wait until the POWER lamp stops flashing and remains lit green.
into the right slot C .
Protective Material on the right side.
Unit Support down into place. The FINE Cartridge Holder automatically moves to the left.
Important Do not touch the Electrical Contacts or Print Head Nozzles on a FINE Cartridge. The machine may not print out properly if you touch it. Do not reattach the Protective Tape once you have removed it. Be careful not to stain your hands or surrounding work area with ink on the removed Protective Tape. c Insert the Black FINE Cartridge slightly slanted into the left slot
Support back to its original position, then close the Scanning Unit (Printer Cover).
The FINE Cartridge Holder moves to the left.
Install the FINE Cartridges here.
B .
g Write down the Serial Number located inside the machine. You
will need this to register your product.
Hardware setup is complete.

Macintosh ® MP Drivers Installation
Macintosh
Note The screens below refer to Windows XP Service Pack 2 installation. Screens may vary depending on the operating system you are using. For Windows XP or Windows 2000, log on to Windows as a member of the Administrators group before continuing. Before installing the driver, disable all anti-virus programs and automatically loading programs. a Be sure to TURN THE MACHINE OFF before continuing.

h When the User Registration screen appears, click Register.

Note Use Mac OS X v.10.2.8 to 10.4.x. The screens below refer to Mac OS X v.10.4.x installation. Screens may vary depending on the operating system you are using. Log on as an Administrator before continuing. Before installing the driver, disable all anti-virus programs and automatically loading programs. a Connect one end of the USB cable to the computer, the other
(1) Press the ON/OFF button.
(2) Make sure that the POWER lamp stops fl ashing.
b Turn the computer on and start Windows.
to the machine.
appears, click Restart.

appears, click Next.


The system is restarted automatically.
When using Mac OS X v.10.2.8 to v.10.3.3: Restarting the computer while connected to the machine may cause the machine not to be detected. To resolve this, either unplug the USB cable then plug it back in again, or turn the machine off then back on again.
automatically.
i When the User Registration screen appears, click Register.
b Turn on your Mac and your machine and insert the Setup CD-

ROM.
(start Print Center if you are using Mac OS X v.10.2.8) and then check that the printer name you want to use is shown in Printer List. If the printer name is not displayed, click Add to add the machine.
. d When the main menu appears, click Easy Install.
on the desktop. c Double-click the Setup icon.

For more detailed instructions, refer to the Mac on-screen Help.
administrator name and password. Click OK. If you do not know your administrator name or password, click
Note Follow on-screen instructions to register your product. You will need your product serial number, which is located on the inside of the machine. See Step 1- g on the front page. We would appreciate it if you would take part in the PIXMA Extended Survey Program regarding the use of Canon machine. For details, refer to the on-screen instructions. j When the Installation completed successfully screen
, then follow the on-screen instructions.
e When the main menu appears, click Easy Install.
Software installation is now complete.

appears, click Exit.
Register your Canon PIXMA today, and you will be entitled to the following benefi ts:
If Restart is displayed, make sure that the Restart the system now (recommended) check box is selected, then click Restart.
contents, click Install.
Canon Sweepstakes!!! Register your PIXMA product and you will be automatically entered to win great Canon prizes! Visit http://www.usa.canon.com/sweepstakes01 for details.
Software installation is now complete.
the on-screen instructions to install the software. If a message asking for your confi rmation to restart your computer appears, click OK.
contents, then click Install.
Receive information on new products, tips and promotions Receive our monthly Printer Newsletter with Canon savings, fun Creative Park projects, and helpful tips.
one end of the USB cable to the computer, the other to the machine, then TURN THE MACHINE ON. The software will begin identifying the printer port being used.
Receive software upgrades Canon USA often updates the software for its printers. You will be among the fi rst to receive notifi cations.
the on-screen instructions to install the software.
Protect your product We will keep the model number and date of purchase of your new Canon PIXMA printer on fi le to help you refer to this information and expedite your call in the event of an insurance claim such as loss or theft.
Part no. QT5-0973-V01 © 2007 Canon Inc. “Windows” is a trademark of Microsoft Corporation, registered in the United States and other countries. Windows Vista is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. “Macintosh” and “Mac” are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. “Adobe” and “Adobe RGB (1998)” are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. All other product and brand names are trademarks of their respective owners. Specifi cations subject to change without notice. XXXXXXXX PRINTED IN VIETNAM
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.