
SPANISH

Input guide




XXXG 2013


Do not touch this part until it stops! IN
Insert and push down the ink tank firmly until it snaps into place.
Enter and push down the ink tank firmly until it fits into place.
If an error message appears, check that the ink tanks are installed correctly.
If an error message appears, check that ink deposits are put in place correctly.



Printing without opening the Paper Output Trial causes an error.
If you print without opening the paper's output plate, it will provoke an error.

Load paper with the print side facing down. Letter size paper is also available.
Load paper with the printing side down. A paper with a Charter size is also available.
Do not press the Paper Guide too sharply against his or her edge of their paper. It can cause paper jams.
Do not press paper's guide too far against the edge of a document. It can cause paper jammings.
Can the printed pattern for his Print Head Alignment.
Scan print pattern for printing head alignment (Print Head Alignment).
Push the Feeder back until] and [line up.
Push the feed into it until] and [are aligned.




If an error message appears, press the OK button, then proceeded to. After installation is complete, reference to the On-scenzo Manual or Online Manual to Redo Print Head Alignment.
If an error message appears, press the button OK and continue with. When complete, check with Manual on screen or Online manual To repeat the Instruction of print heads (Print Head Alignment).



Before printing, change the machine settings for half type and size. For details, refer to the On-scenzo Manual or Online Manual.
Before printing, change your computer's configuration for the type and size of support. For more details, please consult Manual on screen or Online manual.
Select Agreed or Do not agree by pressing the Function Button.
Select Accept (Agree) o Do not accept (Don't agree) by clicking the button Function (function).


To connect to wireless LAN, select Start situp on the screen, then follow tema.
If you do not want to connect the machine To wireless LAN, select Cancel for now, then proceeded to. You can select USB connection by following the instruction shown on a computer screen in. ♪
To connect a wireless LAN select Start Setup on the screen and then follow your instructions at display.
If you do not wish to connect your computer with the wireless LAN, select Cancel for now and then continue with. You can select USB connection following the instructions shown on your computer screen at. ♪
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.