Instruction/ maintenance manual of the product 238-1 GS AEG
Go to page of 11
ARCTIS 238-1 GS Diepvrieskast Fr eezer Congelator e Gebruiksaanwijzing Oper ating Instruction Libr etto d’istruzione A E G Hausgeräte GmbH P ostfach 1036 D-90327 Nürnberg http://www .
19 Dear customer , Before placing your new r efrigerator/fr eezer into oper ation please read the- se operating instructions carefully . They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference.
20 Contents Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Dis posal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Appliance P ackaging Information .
21 Safety The safety aspects of our refriger ators/fr eezers comply with accepted tech- nical standards and the German Appliance Safety Law . Nevertheless, we consider it our obligation to make you aware of the following safety infor- mation: Intended use • The r efrigerator is intended for use in the home.
22 f r i dg e w hen playing (there is risk of suffocation!)or get themselves into other dangerous situations. • Often children cannot r ecognise the hazards present in household appliances.
23 Disposal Appliance Packaging Information All materials are environmentally sound! They can be dumped or burned at an incinerating plant without danger! About the materials: The plastics can be recycled and are identified as fol- lows: >PE< for polyethylene, e.
24 If installation next to a source of heat is unavoidable, the following mini- mum clearances must be maintained at the sides of the appliance: – for electric cookers 3 cm; – for oil and coal fired ranges 30 cm. If these clearances cannot be maintained a heat insulating pad is requir ed between the cooker and the refriger ation appliance.
25 Y our app liance needs air For safety r easons, minimum ventila- tionmust be as shown Fig. Attention: keep ventilation ope- nings clear of obstruction; 100 mm 10 mm 10 mm A B NP00 Rehingeing the door The side at which the door opens can be changed from the right side (fac- tory adjustment) to the left side, if the installation site requir es.
26 and remount them on the other side. 5. Refit the door . 6. Refit bottom hinge (E) on the opposite side, using the two screws previously removed. 7. Remove blanking cover (F) from ventilation grille (D) by pushing it in the direction of the arrow and refit it on the opposite side.
27 If the socket is not accessible once the appliance is built in, the electrical installation must include suitable means of isolating the appliance fr om the mains (e.g. fuse, cut-out, current trip or similar with a minimum contact separation of 3 mm).
28 The red temperatur e pilot-lamp (A) blinks when: – the appliance has been started up but the storage temperatur e has not yet been attained; – the minimum storage temperatur e is no longer bein.
An important point after buying a device AEG 238-1 GS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AEG 238-1 GS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AEG 238-1 GS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AEG 238-1 GS you will learn all the available features of the product, as well as information on its operation. The information that you get AEG 238-1 GS will certainly help you make a decision on the purchase.
If you already are a holder of AEG 238-1 GS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AEG 238-1 GS.
However, one of the most important roles played by the user manual is to help in solving problems with AEG 238-1 GS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AEG 238-1 GS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
