Instruction/ maintenance manual of the product 2073-4 GS AEG
Go to page of 11
Gefrierschranke ÖKO-ARCTIS SUPER 2073-4 GS ÖKO-ARCTIS 204-4 GS Congelateurs Diepvriezer Fr eezer Bedienungsanleitung Mode d’emploi Gebruiksaanwijzing Instruction booklet 2222 059-61.
35 W ARNINGS General Safety ª This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the product. ª It is dangerous to alter the specifications or modify this product in any way .
36 Installation ª During normal operation, the condenser and compressor at the back of the appliance heat up considerably . For safety reasons, minimum ventilation must be as shown in the relevant Figure. Attention: keep ventilation openings clear of obstruction.
37 INST ALLA TION Location Place the appliance as far away as possible from sources of heat, e.g. radiators, heaters, direct sunlight, etc. Best performance is obtained with ambient temperature between +18 ° C and +43 ° C (class T); +18 ° C and +38 ° C (class ST); +16 ° C and +32 ° C (class N); +10 ° C and +32 ° C (class SN).
38 Important It is essential that the appliance be connected to an efficient earth tap. For this purpose the supply cable plug incorporates a special earth contact.
39 Door rever sibility Unplug the freezer before performing the following operations: Remove the ventilation grill (D). Remove the lower hinge (E) by loosening the two fastening screws. Remove the door by sliding it out of the upper pin (A- Fig. 3). Unscrew the pin and the washer (A+B-Fig.
40 USING YOUR FREEZER Star ting Insert the power supply plug into the nearest wall socket (the function indicator light (D) will light up indicating that the freezer is receiving electrical input). T urn the thermostat knob (E) to the right to a medium setting (the temperature alarm light (A) will light up).
41 Freezing f ood Set the freezer to quick-freezing operational status. W ait at least 3 hours before introducing fresh foods into the freezer if it has only recently been turned on.
42 Fr ozen food storage When the freezer is being turned on for the first time, or after a prolonged period of disuse, turn the N/S knob to the Quick-freezing position and then wait at least two hours before introducing the food to be conserved. Y ou may then return the knob to the «N» position.
MAINTENANCE Unplug the appliance bef ore carrying out any maintenance operation. W arning This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore only be carried out by authorized technicians. P eriodical c leaning Never use metal objects for cleaning your appliance as it may get damaged.
AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg Copyright by AEG H 271 271 300 - 0797/03 - 151 2222 059-61 ET 1234567891 01 11 2/9 7.
An important point after buying a device AEG 2073-4 GS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AEG 2073-4 GS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AEG 2073-4 GS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AEG 2073-4 GS you will learn all the available features of the product, as well as information on its operation. The information that you get AEG 2073-4 GS will certainly help you make a decision on the purchase.
If you already are a holder of AEG 2073-4 GS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AEG 2073-4 GS.
However, one of the most important roles played by the user manual is to help in solving problems with AEG 2073-4 GS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AEG 2073-4 GS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
