Instruction/ maintenance manual of the product IP4000 Canon
Go to page of 32
Quick S t art Guide T able of Contents Preface 1 Shipping Materials 1 Introduction 1 Setting Up 2 Preparing the Prin ter 2 Connecting the Printer to th e Computer 2 Installing the Print Head 4 Loading.
Exif Print This printer supports ExifPrint. Exif Print is a standard for enhancing the comm unication between digital cam era s and printers. By connecting to an Exif Print-complia nt digital camera, the camera’ s imag e data at the time of shooting is used and optimized, yielding extremely high quality prints.
1 Preface Shipping Materials Thank you for purchasing a Canon Bubble Jet Printer. Check that all the following items are in the box. If anything is missing or is damaged, contact your Canon Servic e Represen tative.
2 Setting Up 1 Pre paring the Print er 1 Place the printer on a flat surface. 2 Remove the pa cking material and tape from the printer as shown. The tape position is subject to change . 2 Connecting t he Printer to t he Computer Either a USB cable or parallel printer cable is available for iP4000.
3 Follow the step s below to install th e printer driver correctly . 1 Ensure that the printer and the computer are turned of f. 2 Connect the cable. Figure A shows the USB cable connection. Figure B shows the printer cable (parallel) connection (iP4000 only).
4 3 Installing the Print Head • Never attempt to plug the power cord into the power outlet or unplug the power cord when your hands are wet. • Never damage, modify , stretch, or excessively bend or twist the power cord. Do not place heavy objects on the power cord.
5 6 Remove the protective cap from the Print Head. 7 Place the Print Head in the ho lder . 8 Lock the Print Head into place by lowering the lever . Do not touch the lever once the Print Head has been installed. • Do not touch the Print Head Nozzles or electrical c ontacts.
6 Inst alling the Ink T anks • For safety reasons, store ink tanks out of the reach of small children. • Do not drop or shake ink tanks as this may cause the ink to leak out and st ain your clothe s and hands. • Be sure to remove the clear film from the i nk tank in the exact order as shown in step 2.
7 5 Use the same procedure to inst all the other ink tanks in to their appropriate slots. Check the labels to make sure that each tank is in the correct position. 6 Put back the Inner Cover and close the T op Cover . • Only install the ink tanks in the positio ns specified by the labels.
8 4 Loading Paper This section describes how to load paper in the Sheet Feeder . When performing the print head alignment, you need to load paper in the Sheet Feeder . Loading A4 (Letter) Size Plai n Paper in the Sheet Feeder 1 Pull out the Paper Support and Paper Output T ray completely as shown.
9 5 Installing the Printer Driv er Inst alling the Printe r Driver – Windows 1 Ensure that the printer and computer are turned of f. 2 T urn on the computer and st art Windows. If any applications automatically run, quit th em. Disable any anti-virus programs.
10 3 Place the Setup Sof tware & User ’s Guide CD-ROM in the CD-ROM drive . 4 Follow the instructions displayed on screen. When the screen shown on the left is displayed, click Easy Inst all . 5 When the list of applications to inst all appears, verify the contents , click Inst all , then follow the instructions on the screen.
11 9 When the On-screen Manual screen appears, click Next . 10 When the screen shown on the le ft appears, ensure that a sheet of A4 / Letter-sized plain p aper is loaded in the Sheet Feeder . Click Execute and Print Head Alignment to carry out print head alignment.
12 4 Double-click PIXMA iP4000 xxx.pkg or PIXMA iP3000 xxx.pkg . “x” represents a number . 5 Click Continue . 6 Read the License Agreement and click Continue , then click Agree . 7 Select a destination to where you wan t to install the printer d river , and click Continue .
13 6 Aligning the Print Head Aligning the Print Head positions allows you to print without shifts in the color registration. Aligning the Print Head – Windows 1 Click Star t and select Control Panel , Printers and Other Hardware , and then Printers and Faxes .
14 5 Read the message and click Prin t Head Alignment . It takes about 60 seconds to start printing. Do not open the T op Cover while printing. 6 If a message warning you not to perform other operations appears, click OK . 7 Ensure the patte rn shown on the left is printed.
15 2 Double-click the Printer Setup Utility icon. When using versions of Mac OS other than Mac OS X v .10.3.x, double-click the Print Center icon. 3 Select your printer from the Name list and click Utility . When using versions of Mac OS other than Mac OS X v .
16 Basic Operations • If you detect smoke, unus ual smells or strange noises around the printer , immediately switch the printer off and always unplug the printer . Cont act your local Canon service representative. • T o avoid injury , never put your hand or fingers inside the printer while it is printing.
17 4 Ensure that the proper lamp of the paper source light s. If not, press the Paper Feed Switch on the printer. 5 T o start p rinting, click Print . Printing will star t in a few moments.
18 Basic Printing Settings For the best print quality , specify the minimum require ment settings in the Ma in tab. T o get the best results, ensure you se lect th e type of media loaded in the printer when printing on paper other than plain paper .
19 Printing with Macintosh Adjusting the print settings according to your need s allows y ou to produce better quality prints. Printing 1 Open the Page Setup dialog box in your application. From the File menu, click Page Setup . Check the application’ s user s manual for the actual procedures.
20 Page Setup From the Page Setup dialog box, specify the Paper Size settings. Basic Printing Settings For the best print quality , specify the minimum requirement settings in the Print dialog box. Select Quality & Media from the pop-up men u to change the display of the dialog box.
21 Print Head Maintenance If Blurring Occurs or If a S pecific Color Does No t Print Perform Print Head Cleaning to improve the print quality . Ensure that the printer is turned on and follow the instructions be low . • W indows Open the printer driver settings screen and click the Maintenance tab.
22 3 Install the new ink t ank. Put back the Inner Cover and close the T op Cover when finishe d. For more details about ma intenance, refer to the User ’ s Guide .
23 Appendix Printing Ph otog ra phs Dir ectl y from a Digi tal Camer a Connecting a digital still camera or camcorder to the printer allows you to print recorded images directly without using a computer . This printer supports both “PictBridge” and Canon “Bubble Jet Direct.
24 (2) Turn on and set up the camera fo r direct printing. When the connection between the camera and printer has been established, the POWER lamp on the printer flashes once. * The power-on sequence may dif fer dependi ng on the model or brand of the camera.
25 About “Paper size” and “Paper type” T o change the paper size or pape r type, operate the camera to sele ct the PictBridge print setup mode and confirm or check the settings. T o print on Photo Paper Pro, select “Fast Photo” from “Paper type” on the d isplay of the camera.
26 Printing Photographs Directly from a Canon “Bubble Jet Di rect” Compatible Digit al Camera Media T ypes for Digital Camera When you connect a digital camera , you can use the following media: Digital Camera Setting Media T ype Card #1 Photo Paper Pro 4" x 6" / 101.
27 Notes on Handling the USB Interf ace (for W indows Users) If installation of the printer driver does not proceed as instructed in this Quick S tart Guide , there may be a problem with the USB dr iver installation. T ry reinst alling the printer driver .
28 Applications Included in the CD-ROM Package Easy-W ebPrint (Windows) Y ou can easily print out homepages displayed on Inte rnet Explorer in full size without its right- hand side being cropped. This applic ation is automatically added to the Internet Explorer toolbar .
Exif Print This printer supports ExifPrint. Exif Print is a standard for enhancing the comm unication between digital cam era s and printers. By connecting to an Exif Print-complia nt digital camera, the camera’ s imag e data at the time of shooting is used and optimized, yielding extremely high quality prints.
Quick S t art Guide T able of Contents Preface 1 Shipping Materials 1 Introduction 1 Setting Up 2 Preparing the Prin ter 2 Connecting the Printer to th e Computer 2 Installing the Print Head 4 Loading.
An important point after buying a device Canon IP4000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Canon IP4000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Canon IP4000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Canon IP4000 you will learn all the available features of the product, as well as information on its operation. The information that you get Canon IP4000 will certainly help you make a decision on the purchase.
If you already are a holder of Canon IP4000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Canon IP4000.
However, one of the most important roles played by the user manual is to help in solving problems with Canon IP4000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Canon IP4000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
