Instruction/ maintenance manual of the product IP ReadyTM Series Video Alarm FDP75C12N Canon
Go to page of 24
- 1 - Before attempting to connect or operate this product, please read these instructions completely. Product Instructions IP Ready ™ Series FDW75C12N & FDP75C12N 81-IN5329 04/28/06.
! Caution Risk of ElECtRiC shoCk! Caution: to REDuCE thE Risk of ElECtRiCal shoCk, Do not EXPosE C oMPonEnts to WatER oR MoistuRE. safEtY PRECautions iMPoRtant safEGuaRDs 1. Read Instructions - All the saf ety and operating instructions should be r ead befor e the unit is operated.
- 3 - ! ! ELECTRICAL SPECIFICATIONS (OUTDOOR ONLY): Power 12Vdc, Class 2 Only T otal Power: 21 watts Housing only Accessories (Heater/Blower): 21 watts Heater: 20 watts Blower: 1 watt NOTE: This unit is designed for operation in an upright position.
- 4 - INSTALLATION OF PTZ CAMERA See model for specic instruction. Listed on the following pages are the specic instructions for each of the individual network cameras.
- 5 - INSTALLING QUICK RELEASE BRACKETS AXIS 213 2539 Mounting Plate: 1. Install the camera to the 2539 mounting plate using (2) 10-32 screws and lockwashers provided. 2. The Axis 213 camera requires 3.5" of spacing for optimal position within the housing.
- 6 - INSTALLING QUICK RELEASE BRACKETS AXIS 214 2685 Mounting Plate: Attach camera using these (3) holes 1. Install the AXIS 214 camera to the 2685 mounting plate using the (3) 3mm x 12mm bolt and lock washers provided. 2. The AXIS 214 camera requires 2” of spacing for optimal position within the housing.
- 7 - INSTALLING QUICK RELEASE BRACKETS CANON VB-C10R 2539 Mounting Plate: 1. Install the camera to the 2539 mounting plate using (2) 10-32 screws and lockwashers provided. 2. The Canon VB-C10R camera requires 4" of spacing for optimal position within the housing.
- 8 - INSTALLING QUICK RELEASE BRACKETS CANON VB-C50iR 2539 Mounting Plate: 1. Install the camera to the 2539 mounting plate using (2) 10-32 screws and lockwashers provided. 2. The Canon VB-C50iR camera requires 3.5" of spacing for optimal position within the housing.
- 9 - INSTALLING QUICK RELEASE BRACKETS CANON VC-C4R / VC-C50iR 2539 Mounting Plate: 1. Install the camera to the 2539 mounting plate using (2) 10-32 screws and lockwashers provided. 2. The Canon VC-C4R / VC-C50iR camera requires 4" of spacing for optimal position within the housing.
- 10 - INSTALLING QUICK RELEASE BRACKETS ELMO PTC-200C Mounting plate for this unit is included in the housing packet. Remove existing mounting plate installed in the unit before proceeding. 2539 Mounting Plate: 1. Place the camera onto the quick release bracket using the (4) metric 3M Phillips head screws provided with the kit.
- 11 - INSTALLING QUICK RELEASE BRACKETS ELMO PTC-201 Mounting plate for this unit is included in the housing packet. Remove existing mounting plate installed in the unit before proceeding. 2539 Mounting Plate: 1. Place the camera onto the quick release bracket using the (4) metric 3M Phillips head screws provided with the kit.
- 12 - INSTALLING QUICK RELEASE BRACKETS ELMO PTC-400C Mounting plate for this unit is included in the housing packet. Remove existing mounting plate installed in the unit before proceeding. 2539 Mounting Plate: 1. Place the camera onto the quick release bracket using the (4) metric 3M Phillips head screws provided with the kit.
- 13 - INSTALLING QUICK RELEASE BRACKETS ELMO PTC-401 Mounting plate for this unit is included in the housing packet. Remove existing mounting plate installed in the unit before proceeding.
- 14 - INSTALLING QUICK RELEASE BRACKETS JVC VN-C30U 2539 Mounting Plate: 1. Remove the mounting plate from the camera and place it onto the quick release bracket using the (3) metric 3M Phillips head screws provided with the kit. Then place the mounting plate back onto the JVC VN-C30U.
- 15 - ½" 1" 2" INSTALLING QUICK RELEASE BRACKETS P ANASONIC BB-HCM381 / KX-HMC280 2539 Mounting Plate: Attach camera using this hole 1. Install the camera to the 2539 mounting plate using the ¼ x 20, washer and lockwasher provided. 2.
- 16 - ½" INSTALLING QUICK RELEASE BRACKETS PIXORD 261 / 262 2630 Mounting Plate: 1. Install the camera to the 2630 mounting plate using the (3) 8 x 32 x .5 at head screws, nuts and washers provided. 2. The PIXORD 261/262 cameras require ½“ of spacing to properly position the camera within the housing.
- 17 - INSTALLING QUICK RELEASE BRACKETS SONY SNCRZ30 2539 Mounting Plate: 1. Attach the camera to the 2539 mounting plate using the (1) ¼ x 20 bolt, washer and lockwasher provided. 2. The SNCRZ30 require 2” of spacing to properly position the camera within the housing.
- 18 - INSTALLING QUICK RELEASE BRACKETS SONY SNCRZ50 2539 Mounting Plate: 1. Attach the SNCRZ50 camera to 2539 mounting plate using 3mm x 8mm bolt lockwashers provided. 2. The SONY SNCRZ50 require 2 ½ ” of spacing to properly position the camera within the housing.
- 19 - INSTALLING QUICK RELEASE BRACKETS TOSHIBA IK-WB21A 2539 Mounting Plate: 1. Remove the quick release bracket from the camera. Using (4) 8 x 32 x 3/8 bolts and star washers attach the quick release place to the 2539 mounting plate. 2. The T oshiba 1K-WB21A requires 3” of spacing to properly position the camera within the housing.
- 20 - WIRING INSTRUCTIONS Wiring Color Code Power and Control Inputs RJ45 BNC (Large) Power (Small) Alarms AFTER CAMERA INSTALLATION Make inside housing wiring connections following Chart B below.
- 21 - 3. Mount the housing assembly to the mounting bracket and housing coupling. A safety cable is included with the housing to temporarily hold it while making wiring connections. Loop the safety cable over one of the set screws on the housing coupling and make the appropriate connections using the (2) screw-down connectors supplied.
- 22 - Exploded View for Replacement Parts 1 11 6 9 10 1 1 1 2 3 5 4 7 8 14 16 6 12 13 18 (1) (1) (3) (2) (2) (2) (8) (4) (2) (1) (1) (4) (4) (1) (3) (4) (3) (3) (1) (1) (4) (4) (1) (1) (4) (4) 19 17 .
- 23 - Part Number Description 1 RPFD7501 LOWER TRIM RING 2 FD7T TINTED REPLACEMENT CAPSULE FD7C CLEAR REPLACEMENT CAPSULE 3 RPFD703 DOME CLAMPING BRACKET 4 RPFD072 24 VAC HEATER 5 RPFD080 (12 VDC) BL.
- 24 - 2.000 3.250 R .733 2.132 2.981 1.537 5.500 Mounting Template.
An important point after buying a device Canon IP ReadyTM Series Video Alarm FDP75C12N (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Canon IP ReadyTM Series Video Alarm FDP75C12N yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Canon IP ReadyTM Series Video Alarm FDP75C12N - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Canon IP ReadyTM Series Video Alarm FDP75C12N you will learn all the available features of the product, as well as information on its operation. The information that you get Canon IP ReadyTM Series Video Alarm FDP75C12N will certainly help you make a decision on the purchase.
If you already are a holder of Canon IP ReadyTM Series Video Alarm FDP75C12N, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Canon IP ReadyTM Series Video Alarm FDP75C12N.
However, one of the most important roles played by the user manual is to help in solving problems with Canon IP ReadyTM Series Video Alarm FDP75C12N. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Canon IP ReadyTM Series Video Alarm FDP75C12N along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
