Instruction/ maintenance manual of the product i 860 Canon
Go to page of 5
REFILLING CANON PRINTERS i860 and similar. In the past I’ve owned several Epson, H.P, and one Lexmark printer. With this Canon i860 I think I’ve found the first consumer friendly printer, and that’s saying a lot.
Drill motor and a very small drill a bit larger than the diameter of the fill needle. Hot glue gun and glue (of course) Bulk ink refilling kit (from Atlascopy.
and the other empty. There’s a transit space between the two spaces for the ink to move from the empty space (a reservoir) to the foam filled space. The computer uses infra red technology to read the tanks and can report the amount of ink remaining to you using the software “setup utility).
passage for venting. This prevents something called “vapor locking” which won’t allow any ink to leave from the bottom. NEXT , With your rubber gloves on, put your finger over the exit hole on the bottom below the foam filled space. Hold it tight! Now drill another hole on the top of the empty reservoir near the front.
drilled. In future fills it’ll be necessary to clear the hole each time over the reservoir in order for the needle to enter. Generally that will mean using the drill again as the glue will go down into the hole a bit.
An important point after buying a device Canon i 860 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Canon i 860 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Canon i 860 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Canon i 860 you will learn all the available features of the product, as well as information on its operation. The information that you get Canon i 860 will certainly help you make a decision on the purchase.
If you already are a holder of Canon i 860, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Canon i 860.
However, one of the most important roles played by the user manual is to help in solving problems with Canon i 860. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Canon i 860 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
