Instruction/ maintenance manual of the product GP-E2 Canon
Go to page of 2
QuickGuide to the GPS Receiver GP-E2 1 2 3 ACQUIRING A SIGNAL Once the receiver is on, check that the red <GPS> light is blinking. • Fast blink indicates signal not yet acquired • Slow blink indicates signal acquired It normally takes 30–60 seconds for the GP-E2 to acquire a signal.
4 5 6 Y ou can also view GPS and digital compass infor- mation as you shoot. The benet is that this allows you to zero in on a pre-established location, eleva- tion, and direction based on its GPS coordinates. T o view device settings, rst make sure GPS device is set to [Enable] , then select GPS device set- tings/GPS information display .
An important point after buying a device Canon GP-E2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Canon GP-E2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Canon GP-E2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Canon GP-E2 you will learn all the available features of the product, as well as information on its operation. The information that you get Canon GP-E2 will certainly help you make a decision on the purchase.
If you already are a holder of Canon GP-E2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Canon GP-E2.
However, one of the most important roles played by the user manual is to help in solving problems with Canon GP-E2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Canon GP-E2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center