Instruction/ maintenance manual of the product EP27 Canon
Go to page of 24
GB Instruction Manual DE Gebrauchsanweisung CZ Návod na použití SK Návod na použitie GB For laser printers: DE Für die Laserdruckereien: CZ Pro laserové tiskárny: SK Pre laserové tla č iarne.
GB SAFETY INSTRUCTIONS If you stain your hands with the toner powder , wash your hands with soap in lukewarm water . Wash stained clothes in the washing machine at a temperature of max. 40°C! Higher temperatures would cause the toner powder to clog in the tissue and thus cause irreversible damage to your clothes.
GB The toner powder quantity in the re fi ll kit corresponds to the original fi lling quantity and with equivalent print coverage the toner cartridge can print the same number of pages as a new cartridge. Minor differences may be caused by wear to the photo sensitive drum.
REMOVE THE CAR TRIDGE FROM THE PRINTER AND PLACE IT ON THE WORKING SURF ACE ACCORDING TO THE DRA WING Protect the working surface e.g. with a layer of newspaper . The photo sensitive drum must remain covered by the plastic casing to prevent it from damage.
1 7 2 - P E.
HEA T UP THE TOOL FOR MAKING HOLE Place the tool on the enclosed stand and let it heat up for at least 6 minutes. Adhere to all safety instructions relevant to the tool. GB CZ ROZŽHA VIT NÁSTROJ PRO VYTVO Ř ENÍ OTVORU. Nástroj umíst ě te na p ř iložený stojánek a nechte jej rozžhavit minimáln ě 6 minut.
2 6 min..
STICK THE GAUGE ON THE CARTRIDGE ACCORDING TO THE DRA WING GB CZ NALEPIT SAMOLEPÍCÍ M Ě RKU PODLE NÁKRESU SK NALEPI Ť SAMOLEPIACU ODMERKU POD Ľ A NÁKRESU DE KLEBEN SIE DIE SELBSTKLEBE MESSDOSE .
3 1 2 3 4 5 6 7 EP 27 7 2 - P E 7 2 - P E 1 2.
BURN OUT A REFILL HOLE APPL Y THE T OOL PERPENDICULARL Y IN THE CUTED P ART OF THE GAUGE. Burn a hole by applying slight pressure on the toner container wall (7 - 8 s). Remove burnt part of the plastic of the tool. If the burnt plastic part falls inside the toner container , it must be removed.
4 7 2 - P E 7 2 - P E 7 - 8 s.
UNPLUG THE TOOL FROM THE SOCKET Allow the tool to cool down placed on the enclosed stand. PUT ON FUNNEL AND GUARD RING Shake the bottle with toner well, unscrew the cap, put the funnel on the bottle neck and the guard ring on the funnel. GB CZ ODPOJIT NÁSTROJ ZE ZÁSUVKY Nástroj nechte vychladnout na p ř iloženém stojánku.
5 Zátka k uzav ř ení plnicího otvoru. Zátka pre uzavretie plniaceho otvoru. Plug for sealing of the fi lling hole. Der Stopfen dient zum Einschluss der Einfüllöffnung.
INSERT THE FUNNEL INTO THE REFILL HOLE Hold the cartridge and the bottle exactly according to the drawing to avoid their content spillage. Insert the bottle with funnel into the re fi ll hole.
7 2 - P E 7 2 - P E 7 7 2 - P E 2 1.
POUR THE POWDER INTO THE T ONER CONT AINER By horizontal movement and tapping on the bottle pour the toner powder into the toner container . By the horizontal movement is the powder distributed evenly inside the cartridge. Do not move the cartridge in a vertical direction during the re fi lling.
8 7 2 - P E 7 2 - P E.
PLUG UP THE REFILL HOLE Plug the re fi ll hole using the enclosed plug pushed in to its edge. GB CZ ZAZÁTKOV A T PLNICÍ OTVOR Uzav ř ete plnicí otvor p ř iloženou zátkou, kterou zatla č te až po okraj. SK ZAZÁTKOV A Ť PLNIACI OTVOR Uzavrite plniaci otvor priloženou zátkou.
9 7 2 - P E 7 2 - P E.
CLEAN THE TONER CARTRIDGE USING THE ENCLOSED ANTIST A TIC CLOTH. Shake the cartridge in a horizontal direction to distribute the powder evenly inside the cartridge. Install the toner cartridge into your printer . GB CZ O Č ISTIT T ONEROVOU KAZETU P Ř ILOŽENOU ANTIST A- TICKOU UT Ě RKOU.
7 2 - P E 7 2 - P E 10 2 1.
GB DISPOSAL OF THE P ACKAGING Dispose of the packaging material in an appropriate manner . All materials used are environmentally friendly and can be disposed of like normal household waste. If your municipality collects separated waste, throw plastic and cardboard wrapping parts into the relevant containers intended for this purpose.
GB As long as you are satis fi ed with the print quality after using up all the re fi lled toner powder , you can re fi ll the cartridge with the TONER ROBOT repeatedly . In this case we recommend to use part of the toner powder only and re fi ll the rest in case the print is without failure after it is used up.
Produced by: Smart Print, 1650 Ridgeview Circle, Auburn, CA 95603, California, USA Distributor: Smart Print s.r .o., T ř ída Eduarda Beneše 1544 50012, Hradec Králové, CZECH REPUBLIC tel: +420 495 270 030 E-mail: obchod@smart-print.cz www.smart-print.
An important point after buying a device Canon EP27 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Canon EP27 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Canon EP27 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Canon EP27 you will learn all the available features of the product, as well as information on its operation. The information that you get Canon EP27 will certainly help you make a decision on the purchase.
If you already are a holder of Canon EP27, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Canon EP27.
However, one of the most important roles played by the user manual is to help in solving problems with Canon EP27. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Canon EP27 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center