Instruction/ maintenance manual of the product CAM330 Advent
Go to page of 12
Model: CAM330 Wired License Plate / Rear Mounted Camera Inst allation Manual Features • Very Small Compact Camera • High Resolution, ¼ inch CMOS Color Camera • Waterproof Housing • 160 Degree.
2 T able of Content s Warnings ...................................................................................... 3 Product Description ..................................................................... 4 Packing List ..........................
3 W arnings The product is intended to assist in safe driving and to allow the driver to have a broader rear view while the vehicle is in reverse. You, as the driver, are solely responsible for the safe operation of your vehicle and the safety of your passengers according to local traffic regulations.
4 Product Description This revolutionary camera design integr ates a backup camera with your vehicle’s rear license plate without c overing the license plate. The camera is easy to mount on your car, truck, or van with the br acket being hidden by your license plate.
5 Camera Inst allation License Plate Mounting Instructions 1. Remove the rear license plate. 2. Examine the vehicle to determine the best way to run the power wires to the reverse lights and the extension cable through the car. 3. The Camera can be mounted above or below the plate.
6 that is not covered by the warranty. If drilling a hole, perform th e following steps: a) Acquire a 5/8 inch drill bit, rust preventive, all of whic h can be purchased at a hardware store. b) Check behind the intended drilli ng location before dril ling to verify that no wires or mechanisms can interfere with or be damaged during drilli ng.
7 sure that the mounting screws will not hit any wires or equipment inside the vehicle. 2. Attach the surface mounting bracket to the vehicle with the hardware included.
8 Obtaining Reverse Power 1. Locate the reverse lamp in the tail light assembly. 2. Using the tap connector supplied, perform the following steps: a) Place the un-stripped positive lead from the tail lamp in the run channel, which runs completely through the connector.
9 Reverse/Normal Image Adjustment The camera comes standard with a reversed i mage, designed for mounting at the rear of the vehicle. If you need to change to a forward or normal image view, clip the blue jumper wi re loop on the wiring cable (labeled “Mirror Selection” below) to change the camera image to normal.
10 S pecifications 1. Voltage: DC12V 2. Current: 50 mA 3. Signal System: NTSC 4. Image Sensor: ¼” CMOS Sensor 5. Horizontal Resolution: 480 lines 6. Viewing Angle: 160 degrees 7. Minimum Illum ination: 0.7 Lux 8. Image Display: Selectable Nor mal/Reverse Image 9.
7.
8 © 2008 Audiovox Electr onics Corp., 150 Marcus Blvd., Hauppauge, N.Y. 11788.
An important point after buying a device Advent CAM330 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Advent CAM330 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Advent CAM330 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Advent CAM330 you will learn all the available features of the product, as well as information on its operation. The information that you get Advent CAM330 will certainly help you make a decision on the purchase.
If you already are a holder of Advent CAM330, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Advent CAM330.
However, one of the most important roles played by the user manual is to help in solving problems with Advent CAM330. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Advent CAM330 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
