Instruction/ maintenance manual of the product UNO 2173A/AF Advantech
Go to page of 42
UNO-2173A/AF Intel Atom Fanless Box PC with 1 x LAN, 2 x COM, Mini-PCIe User Manual.
UNO-2173A/AF User Manual ii Copyright This document is copyrighted, © 20 09. All rights are reserved. The origi- nal manufacturer reserves the right to make improvem ents to the products described in this manual at any time wi thout notice.
iii Product W arranty Advantech warrants to you, the original purchaser , that each of its prod- ucts will be free from defects in ma terials and workmansh ip for one year from the date of purchase.
UNO-2173A/AF User Manual iv Declaration of Conformity CE This product has passed the CE test for environmental specificati ons when shielded cables are used for external wiring. W e recommend the use of shielded cables. This kind of cable is available from Advantech.
v Safety Instructions 1. Read these safety instructions carefully . 2. Keep this User Manual for later reference. 3. Disconnect t his equi pment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray det ergents for cleaning.
UNO-2173A/AF User Manual vi TURER, DISCARD USED BA TTERIES ACCORDING TO THE MANUF ACTURER'S INSTRUCTIONS. 23. The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A). DISCLAIMER: This set of instructio ns is given according to IEC 704-1.
vii Table of Contents Contents Chapter 1 Overview ........................................................... 2 1.1 Introduction ............ ............................ ............ ........... ........ 2 1.2 Hardware Specifications ... ............
UNO-2173A/AF User Manual viii Appendix A System Settings and Pin Assignments .......... 24 A.1 System I/O Address and Interrupt Assignment ....... 24 Table A.1: UNO-2173A/AF System I/O Ports . . ........... 24 A.2 Board Connectors and Jumpers ........
2 CHAPTER 1 Overview This chapter provides an overview of UNO-2173A/AF’ s specifications. Sections include: • Introduction • Hardware specification • Safety precautions • Chassis dimensions.
UNO-2173A/AF User Manual 2 Chapter 1 Overview 1.1 Introduction UNO-2173A/AF is an em bedded Appli cation Ready Platform (ARP) that can shorten your development time an d offers rich networking interfaces to fulfill extensive needs in differ ent projects.
3 Chapter 1 1.2 Hardware Specifications General • Certifications Energy S tar , CE, FCC class A, UL, CCC • Dimensions (W x D x H) 255 x 152 x 59 mm (10" x 6.
UNO-2173A/AF User Manual 4 I/O Interface • Serial Ports 2 x RS-232 • Serial Port Speed 50 ~ 1 15.2 kbps • LAN 1 x 10/100/1 000 Base-T RJ-45 ports (Built-in boot ROM in flash BIOS) • USB Ports 2 x USB 2.
5 Chapter 1 1.3 Safety Precautions The following sections tell how to make each connection. In most cases, you will simply need to connect a standard cable. Warning! Always disconnect the power cord from your chassis whenever you are working on it. Do not connect while the power is on.
UNO-2173A/AF User Manual 6 1.4 Chassis Dimensions Figure 1.1: UNO-2173A Chassis Dimensions 111.09 111.09 241.80 241.80 149.24 149.24 10.51 10.51 Ø 5.40 5.
7 Chapter 1 Figure 1.2: UNO-2173AF Chassis Dimensio ns 111.09 111.09 241.80 241.80 149.24 149.24 10.51 10.51 Ø 5.40 5.40 Ø 4.00 4.00 228.20 228.20 2.
UNO-2173A/AF User Manual 8 1.5 Accessories Please refer below for the accessory list: • 3-pin connector for power wiring (Advantech P/N : 165 2003206) • 5-pin connector for COM3 RS-422/485 ( UN O-.
2 CHAPTER 2 Hardware Functionality This chapter shows how to setup the UNO-2173A/AF’ s hardwa re functions, including connecting peripherals, set- ting switches and indicators.
UNO-2173A/AF User Manual 10 Chapter 2 Hardware Functionality 2.1 Introduction The following two figures show the connectors on UNO-217 3A/AF . The following sections give you detailed informatio n about function of each peripheral. Figure 2.1: Front panel of UNO-2173A/AF Figure 2.
11 Chapter 2 2.3 RS-422/485 Interface (UNO-2173AF) The UNO-2173AF offers one RS-422/485 serial communica tion interface ports: COM3. Please refer to Appendix A.4 for their pin assignments. The default setting of COM3 is RS-422. 2.3.1 RS-422/485 Selection The mode of UNO-2173AF COM3 can be selected in th e BIOS.
UNO-2173A/AF User Manual 12 2.3.3 T ermination Resis tor (SW3) The onboard termination resistor (120 ohm) for COM3 can be used for long distance transmission or device matching. (Default Open.) 2.4 LAN: Ethernet Connector UNO-2173A is equipped with one Giga LAN controll er and UNO- 2173AF has two.
13 Chapter 2 2.7 USB Connector The USB interface supports Plug and Play , which enables you to connect or disconnect a device whenever you want, withou t turning off the com- puter .
UNO-2173A/AF User Manual 14 2.9.1 Lithium Battery S pecification • Ty p e : BR2032 (U sing CR2032 is NOT recommended) • Output volt age: 3 V DC • Location: BH2, please refer to below figure Figure 2.
15 Chapter 2 2.1 1 Reset Button Press the "Reset" button to activ ate the hardware reset function. 2.12 HD Audio ( UNO-2173AF) UNO-2173AF is equipped with ALC888-GR whi ch is a High Definition Audio Codec. UNO-2173AF provides 3 phone jack conn ector for 5.
UNO-2173A/AF User Manual 16.
2 CHAPTER 3 Initial Setup This chapter in troduces how to i nitial- ize the UNO-2173A/AF . Sections include: • Inserting a CompactFlash Card • Chassis Grounding • Conneting Power • Connecting .
UNO-2173A/AF User Manual 18 Chapter 3 Initial Setup 3.1 Inserting a Comp actFlash Card 1. Remove the power cord. 2. Unscrew the two screws of CF cover in the front panel. 3. Plug a CompactFlash card with your OS and application program into a CompactFlash card slot on board.
19 Chapter 3 3.3 Connecting Power Connect the UNO-2173A/AF to a 9~36 VDC power source. The power source can either be from a power ad apter or an in-house power source. 3.4 Inst alling a Hard Disk The procedure for installin g a hard disk into the UNO-2173A/AF is below .
UNO-2173A/AF User Manual 20 3.5 Inst alling a Wireless LAN Card and Antenna Please contact Advantech to prep are the following optional kit: Rear Panel for Antenna.
21 Chapter 3 Antenna • Please select the necessary specifi cation according to your application. • One of the suggested antenna is 175000322 2 (18 cm) which is a veri- fied 802.11b/g 5dBi Dipole Antenna Then follow the below steps for the inst allation: 1.
UNO-2173A/AF User Manual 22 6. Screw back the botto m panel. 7. Assemble the antenna on the SMA conn ector . 3.6 BIOS Setup Press "DEL" in the boot-up screen to enter the BIOS setup utility . Please follow the instruction on the screen to do the necessary setti ngs.
Appendix A System Settings and Pin Assignment s.
UNO-2173A/AF User Manual 24 Appendix A System Settings and Pin Assignment s A.1 System I/O Address and Interrupt Assignment T able A.1: UNO-2173A/AF System I/O Ports Address Range Device 000-01F DMA c.
25 Appendix A T able A.2: UNO-2173A/AF Interrupt Assignment Interrupt No. I nterrupt Source NMI Parity error detected IRQ 0 Interval timer IRQ 1 Key board IRQ 2 Interrupt from controller 2 (cascade) I.
UNO-2173A/AF User Manual 26 A.2 Board Connectors and Jumpers There are several connectors and ju mpers on the UNO-2173A/AF board. The following section s tell you how to configure the UNO-2173A/AF hardware setting. Figure A-1 sh ow s the locations of UNO-2173A/ AF’ s connectors and jumpers.
27 Appendix A A.3 RS-232 St andard Serial Port (COM1~COM2) T able A.4: RS-232 st andard serial port pin assignments Pin RS-232 Signal Name 1D C D 2R x D 3T x D 4D T R 5G N D 6D S R 7R T S 8C T S 9R I.
UNO-2173A/AF User Manual 28 A.4 RS-422/485 Serial Port (UNO-2173AF) A.5 Power Connector (PWR) T able A.5: RS-422/485 serial port pin assignments Pin RS-422 RS-485 1T X + D a t a + 2T X - D a t a - 3R X + 4R X - 5G N D T able A.
29 Appendix A A.6 PS/2 Keyboard and Mouse Connector A.7 USB Connector T able A.7: Keyboard and Mouse connector pin assignment s Pin Signal Name 1 KB DA T A 2M S D A T A 3G N D 4V C C 5 KB Clock 6 MS Clock T able A.
UNO-2173A/AF User Manual 30 A.8 VGA Display Connector T able A.9: VGA adaptor cable pin assignment Pin Signal Name 1R e d 2 Green 3B l u e 4N C 5G N D 6G N D 7G N D 8G N D 9N C 10 GND 11 N C 12 NC 13 .
31 Appendix A A.9 L VDS and L VDS_PWR (UNO-2173AF) A.9.1 L VDS T able A.10: L VDS pin defini tions Pin Signal Pin Signal 1 L VDS1_Z_CLK+ 14 L VDS1_Z_CLK- 2 GND 15 L VDS0_Z_D0- 3 L VDS0_Z_D0+ 16 L VDS0.
UNO-2173A/AF User Manual 32 A.9.2 L VDS Power Setting (CN17) A.9.3 L VDS_PWR (Back light Control) T able A.1 1: CN17 Configuration Configuration Function VDD_DSUB (Pin 7 and Pin 20) of L VDS pin is +5V VDD_DSUB (Pin 7 and Pin 20) of L VDS pin is +3.3V T able A.
33 Appendix A A.10 Clear CMOS (CN3) This jumper is used to erase CMOS data and reset system BIOS informa- tion. Follow the procedures below to clear the CMOS. 1. T urn of f the system. 2. Close jumper CN3 (1-2) to clear CMOS . 3, Remove jumper CN3(1-2) 3.
UNO-2173A/AF User Manual 34.
An important point after buying a device Advantech UNO 2173A/AF (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Advantech UNO 2173A/AF yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Advantech UNO 2173A/AF - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Advantech UNO 2173A/AF you will learn all the available features of the product, as well as information on its operation. The information that you get Advantech UNO 2173A/AF will certainly help you make a decision on the purchase.
If you already are a holder of Advantech UNO 2173A/AF, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Advantech UNO 2173A/AF.
However, one of the most important roles played by the user manual is to help in solving problems with Advantech UNO 2173A/AF. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Advantech UNO 2173A/AF along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
