Instruction/ maintenance manual of the product C360 Canon
Go to page of 238
Installation and Configuration for the Avaya C360 Converged Stackable Switches Software Version 4.5 10-601564 Issue 1 July 2006.
© 2006 A vaya Inc. All Right s Reserved. Notice While reasonable ef for t s were made to ensu re that the information in this document was complete and accurate at the time of printing, A vaya Inc. can assume no liability for any errors. Changes and corrections to the information in th is do cument may be incorporated in future rel eases.
Issue 1 July 2006 3 Before you Install the A vaya C360 . . . . . . . . . . . . . . . . . . . . . 13 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Conventions Used in the Document ation . . . . . . . . . . .
Contents 4 Installation and Configuration Guide Avaya C3 60 Multilaye r Stackable Switche s, version 4.5 Inter-Connecting Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 To connect stacked switches: . . . . . . . . . . . . . . . . .
Contents Issue 1 July 2006 5 Connecting a Modem to the Console Port . . . . . . . . . . . . . . . . . . . . 71 SNMP Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Introduction to SNMP . . . . . . . . . . . . . . .
Contents 6 Installation and Configuration Guide Avaya C3 60 Multilaye r Stackable Switche s, version 4.5 Uploading and Downloading Device Configuration s and Images . . . . . . . . . 99 Layer 2 Configuration File . . . . . . . . . . . . . . . . . . . .
Contents Issue 1 July 2006 7 802.1x CLI Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 Sp anning T ree Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 Overview . . . . . . . . . . . . . . . . . .
Contents 8 Installation and Configuration Guide Avaya C3 60 Multilaye r Stackable Switche s, version 4.5 Weighted Queuing CLI Commands . . . . . . . . . . . . . . . . . . . . . . . . 146 LLDP Agent . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Issue 1 July 2006 9 DHCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 DHCP/BOOTP Relay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 BOOTP/DHCP CLI Commands . . . . . . . . . . . . . . . . .
Contents 10 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 Inst alling the Java Plug-in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197 Installing from the C360 Documentati on and Utilities CD .
Contents Issue 1 J uly 2006 11 Appendix C: S t andards and Comp atibili ty . . . . . . . . . . . . . . . . . 221 A vaya C360 St andards Supported . . . . . . . . . . . . . . . . . . . . . . . . . . 221 IEEE . . . . . . . . . . . . . . . . . . . . . . .
Contents 12 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5.
Issue 1 J uly 2006 13 Before you Inst all the A vaya C360 Safety Information ! W ARNING: WARNING: ONLY TRAINED AND QUALIFIED PERSONNEL SHOULD BE ALLOWED TO INST ALL OR REPLACE THIS EQUIPMENT. ! ADVERTENCIA: ADVERTENCIA: SOLAMENTE PE RSONAL CALIFICADO Y E NTRENADO DEBE IN ST ALAR O REEMPLAZAR ESTE EQUIPO.
Before you Install the Avaya C360 14 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 ! ADVERTENCIA: ADVERTENCIA: Los ventiladores están encendidos siempre que el equipo esté conect ado al suministro eléctrico.
Conventions Used in the Documentatio n Issue 1 J uly 2006 15 Notes, Cautions, and W arnings ! CAUTION: CAUTION: Y ou should take care. Y ou could do something that may damage equipment or result in loss of data. ! PRECAUCIÓN: PRECAUCION: Debe tener cuidado.
Before you Install the Avaya C360 16 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5.
Issue 1 J uly 2006 17 Section 1: A v ay a C360 Over vie w.
18 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5.
Issue 1 J uly 2006 19 Chapter 1: A vaya C360 Overview The C360 is a line of converged st ackable switch es that provide high availability , quality of service (QoS), and IEEE 802.3af Power over Ethernet (PoE) to enhanc e converged network infrastructure operations.
Avaya C360 O verview 20 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 ● When the switches are st acked, the switches elect one switch as the master , while the other switches act as slaves. The master sw itch acts as the st ack management agent reporting to the management syst em.
C360 Features and Bene fits Issue 1 J uly 2006 21 - Up to two simultaneous encrypted SSH (S ecure Shell) connections f or multiple CLI-based sessions over th e network.
Avaya C360 O verview 22 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 ● S tack redundancy - in the un likely event that a C360 switch or Octaplane link should fa il, stack integrity is maint ained if the redundant cable is connected to the stack.
C360 Features and Bene fits Issue 1 J uly 2006 23 ● Remote Authentication Dial-In User Service (RADIUS) provides flexible administrative control over authentication and authorization pro cesses. Refer to RADIUS on page 80 for further information. ● SNMP v3 adds security features to the SNMP v1 and SNMP v2c feature set.
Avaya C360 O verview 24 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 ● Port classification to regular/valuable so in case of link failure n otification is generated for valuable ports only . Refer to Port Classification on page 139 for further information.
C360 Features and Bene fits Issue 1 J uly 2006 25 ● IP routing between VLANs (inter-VL AN routing) for full Layer 3 switching between two or more VLANs, allowing each VLAN to maint a in its own auto.
Avaya C360 O verview 26 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 ● Y ou can manage the switch from an SNMP-comp a tible management station that is run ning platform such as HP OpenV iew . The switch supports a comprehensive set of MIB extensions and four RMON groups .
Issue 1 J uly 2006 27 Section 2: Installing the C360.
28 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5.
Issue 1 J uly 2006 29 Chapter 2: A vaya C360 Front and Rear Panels This chapter describes the front and rea r panel s of the C360 switches, including the LEDs, buttons and power inlet s: ● C360 Front Panels ● C360 Rear Panel C360 Front Panels The front pan el contains LEDs, controls, and connectors.
Avaya C360 Front and Rear Panels 30 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 Figure 2: C363T -PWR Front Panel Figure 3: C364T and C364T NEBS Front Panel Figure 4: C364T -PWR Front Panel Figure 5: C360 Function LEDs Figure notes: 1.
C360 Front Panels Issue 1 J uly 2006 31 Figure 6: Order of Function 'Parameters Selecte d with the Lef t/Right Front Panel Buttons Figure notes: 1.
Avaya C360 Front and Rear Panels 32 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 The following Function LEDs apply to a ll ports LNK Port S tatus OFF - .
C360 Rear Panel Issue 1 J uly 2006 33 *C360-PWR only Tip : Tip: All LEDs light during a reset. C360 Rear Panel The C360 rear p anel contains a stacking modu le slot, AC power input and BUPS DC input. Note: Note: The C/S: and SW versions on your C360 sw itches may differ from those shown in Figure 7 .
Avaya C360 Front and Rear Panels 34 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 Figure 7: C360 Rear Panel Figure notes: 1.
Issue 1 J uly 2006 35 Chapter 3: Inst allation The C360 switch is ready to work af ter you complete the installation instructions described in this chapter .
Installation 36 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 Site Prep aration Y ou can mount the C360 alone or in a st ack in a standard 19-inch equipment rack locat ed in a wiring closet or equipment room.
Rack Mountin g (Optional) Issue 1 J uly 2006 37 ● The power source matches t he specifications shown in T able 7 : Rack Mounting (Optional) The C360 chassis fits in most st andard 19-inch racks.
Installation 38 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 Figure 8: Front and Mid-Mount Positions Before you Inst all the C360 in a Rack ● When inst alling C360 in a rack, ensure that th e equipment is positioned such that it will not cause the rack to become unst able or tip over .
Rack Mountin g (Optional) Issue 1 J uly 2006 39 Figure 9: C360 Rack Mounting (except C364T NEBS) Figure 10: C360 Rack Mounting - Front Mount (C364T NEBS only) Figure 1 1: C360 Rack Mounting - Mid Mount (C364T NEBS only) 2. Firmly attach the bracket s to the chassis with the screws provided.
Installation 40 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 -U s e four screws to attach each bracket to the switch for non-NEBS switches. -U s e eight screws to attach each bracket to the switch for the C364T NEBS switch.
Stacking (optional) Issue 1 J uly 2006 41 ! CAUTION: CAUTION: Ensure that ventilation holes are n ot obstructed. S t acking (optional) There are two main steps for creating st acks: 1.
Installation 42 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 4. T ighten the two screws on the sid e panel of the st acking module by turning the knurled knobs clockwise. Inter-Connecting Switches Tip : Tip: Y ou may stack the C360 with the G700, P333 T-PWR, P332G-ML or P332G T-ML.
Stacking (optional) Issue 1 J uly 2006 43 4. If you wish to implement stack redundancy , use the Redundant Cable to connect the port marked “to lower unit" on the bottom switch to the p ort marked “to upper unit"" on the top switch of the stack.
Installation 44 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 Figure 14: Plug for Unused S tac king Port s Making Connections to Network Equipment This section describes the phys ical connections that you can make bet ween the C360 switch and other network equipment.
Installing SFP GBIC Transceivers Issue 1 J uly 2006 45 2. For all other ports, co nnect an Ethernet copper cable (not supplied) directly to the ports. The copper ports can ope rate with 2 pair (4 wire ) or 4 pair (8 wire) CA T 5 Ethernet cables (crossed or straight).
Installation 46 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 Inst alling and Removing a SFP GBIC T ransceiver The SFP GBIC transceiver is faste ned using a snap-in clip.
Installing SFP GBIC Transceivers Issue 1 J uly 2006 47 Copper GBIC T ransceiver Inst allation Notes Before installing a coppe r SFP transceiver , ensure that auto-negotia tion is enabled for the transceiver ports. Y ou should also ensure that the auto-negotiation is enabled for the port at the other end of the link: 1.
Installation 48 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5.
Issue 1 J uly 2006 49 Chapter 4: Powering Up the A vaya C360 This chapter describes the procedures for p owering up C360 switches. Connecting the C360 to the main e lectrical suppl y provides power to the switch and for Power over Ethernet (PoE).
Powering Up the Avaya C360 50 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 Connecting to an AC Power Supply AC Power Cable The C360 switch is supplied with a North American power cordset.
Connecting to a DC Power Source (C 364T NEBS Only) Issue 1 J uly 2006 51 Connecting to a DC Power Source (C364T NEBS Only) The C364T NEBS is rated -36 to -60 VDC, 2A.
Powering Up the Avaya C360 52 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 2. Positive to positive 3. Negative to negative ! W ARNING: WARNING: Make sure that you connect th e cables between the C360 and the external power supply correctly: 1.
Connecting a BUPS Issue 1 J uly 2006 53 Connecting a BUPS Note: Note: Y ou cannot connect the C360 to a DC power supply and BUPS simult aneously . If you deploy a BUPS with the C360, the Powerst ax (f.
Powering Up the Avaya C360 54 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 2. Connect the power cable to the terminals on the C360 and then external DC power supply .
Connecting a BUPS Issue 1 J uly 2006 55 Sample Backup Power Supply Scheme Figure 19 shows a connection example for a st ack of three C363T-PWR switches. This configuration provides power supp ly redundancy and up to 305 W of inline po wer per C363T-PWR switch.
Powering Up the Avaya C360 56 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 * These i tems are not availa ble from A vaya. ** Y ou can also use the long Octaplane stacking cables. See the “Avaya X360STK Installation Guide" for information.
Connecting a BUPS Issue 1 J uly 2006 57 Budgeting Power Note: Note: One Powerstax 800W PSU provides enough p ower for a st ack of ten C363T an d/ or C364T switches.
Powering Up the Avaya C360 58 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 Post-Inst allation The following indicate that you have p erf ormed the installation procedure co rrectly: If you do not re ceive the appro priate indication, p lease refer to Chapter 12: T roubleshoot ing the Installation .
Issue 1 J uly 2006 59 Chapter 5: Est ablishing Switch Access This chapter describes various methods for accessing the C360 CLI and logging in with th e appropriate security level: C360 CLI ● CLI Arc.
Establishing Switch Access 60 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 CLI Architecture The C360 stack supports both Layer 2 switching an d Layer 3 switching. The C360 CLI includes two CLI entities to supp ort this functionality .
Security Levels Issue 1 J uly 2006 61 Tip : Tip: The Web management p a sswords are the same as those of the CLI. If you change the passwords of the CLI then those passwords b ecome active for Web management as well.
Establishing Switch Access 62 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 Entering the CLI T o enter the CLI, enter your username and password. Y our access level is indicated in the prompt as shown in Ta b l e 1 4 .
Establishing a Console Conne ction Issue 1 J uly 2006 63 1. Use the serial cable supplied to attach the RJ-45 console connector to the Console port of the master C360. Connect the DB-9 connector to t he serial (COM) port on your PC/terminal. - The master C360 is indicated by the SYS LED being ON.
Establishing Switch Access 64 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 Assigning C360 IP S t ack Address Note: Note: All C360 switches are shipped with the same default IP address.
Establishing a Telnet Conne ct ion Issue 1 J uly 2006 65 Est ablishing a T elnet Connection Perform the following step s to establish a T elnet connection to the C360 for configuration of S tack or Router p arameters. Y ou can T elnet the S tack Ma ster IP address: 1.
Establishing Switch Access 66 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 Est ablishing an SSH Connection Introduction to SSH SSH (Secure Shell) protocol is a security prot ocol that enables establishing a re mote session over a secured tunnel, also called a remote shell.
Establishing an SSH Connect ion Issue 1 J uly 2006 67 4. The C360 derives it s DH private key y and it s DH public key f =( g ^ y )mod p , and sends the f value to the client, its public host key and the digital signature calculated for all values exchanged so far including f and public host key .
Establishing Switch Access 68 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 Figure 21: SSH Session Est ablishment Process Procedure for Est ablishing an SSH Connection Perform the following step s to establish an SSH connection to the C360 for configuration of S tack or Router p arameters.
Establishing an SSH Connect ion Issue 1 J uly 2006 69 5. Using your SSH client software, open a session to the S tack Master IP address. 6. When you are prompted for a password, enter the Use r Level password root in lower case letters (do not use uppercase letters).
Establishing Switch Access 70 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 Est ablishing Access to Other Entities in the St ack (C360 Sessions) Y ou can use sessions to switch between the CLI of C360 switches, other st ack entities, or to switch between Layer 2 and Layer 3 commands.
Establishing a Modem (PPP) Connection Issue 1 J uly 2006 71 Est ablishing a Modem (PPP) Connection Point-to-Point Protocol (PPP) provides a Layer 2 method for trans porting multi-protocol datagrams ove r modem links.
Establishing Switch Access 72 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 9. Y ou can now dial into the switch from a remote station, an d open a T elnet session to the PPP interface IP address.
SNMP Support Issue 1 J uly 2006 73 SNMP Support Introduction to SNMP SNMP V ersions There are currently three versions of SN MP (Simple Ne twork Management Protocol): ● SNMPv1 ● SNMPv2c ● SNMPv3 The C360 supports device access using all three versions of SNMP .
Establishing Switch Access 74 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 ● Retrieve the value immediately af ter the variable you name - a get-next action. The SNMP manager retrieves values from the MIB tree.
SNMP Support Issue 1 J uly 2006 75 SNMPv3 SNMPv3 enables the following features over SNMPv1 or v2c: ● User authentication with a usern ame and password.
Establishing Switch Access 76 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 ● Authentication Protocol - The authentication protoc ol to use.
SNMP Support Issue 1 J uly 2006 77 - AuthNoPriv - AuthPriv ● View names: - Read - Allow read-only access to a specified list of Object IDs (OIDs) in the MIB t ree. - Write - Allow read-write access to a specified list of OIDs in the MIB tree. - Notify - Allow SNMP notifications from a specified list of OIDs to be sent.
Establishing Switch Access 78 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 Configure the SNMPv3 engine ID snmp-server engineID Return the SNMPv3 engine .
SNMP Support Issue 1 J uly 2006 79 Enable SNMP notifications (traps and inform) snmp-server enable not ifications Disable SNMP notifications (traps and inform) no snmp-server notifications Create an S.
Establishing Switch Access 80 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 RADIUS Introduction to RADIUS User accounts are typically maintain ed locally on the switch. Therefore, if a site cont ains multiple Avaya Switches, it is necessary to co nfigure each switch with it s own user account s.
RADIUS Issue 1 J uly 2006 81 Figure 22: RADIUS Authentication Procedure RADIUS is also part of IEEE 802.1x port-bas ed network access contro l. For information on 802.
Establishing Switch Access 82 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 RADIUS Commands The following RADIUS commands are accessible fro m Supervisor level.
Recovery Password Issue 1 J uly 2006 83 Recovery Password Introduction to Recovery Password The C360 provides a recovery p assword in the event tha t you have forgotten the login password for the switch . The recovery password feature enables you to login to the device in a super user mode and change the reg ular login password.
Establishing Switch Access 84 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 Allowed Managers Allowed Managers Introduction With the Allowed Managers feature, the n etwork manager can determine who may or may not gain management access to the swit ch.
Allowed Managers Issue 1 J uly 2006 85 Show whether the status o f allowed managers is enabled or disabled show allowed managers st atus Show the IP addresses of the managers that are currently connected show secure current T able 19: Allowed Managers CLI Commands 2 of 2 In order to.
Establishing Switch Access 86 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 Allowed Protocols Allowed Protocols Introduction With the Allowed Protocols feature, the network manager can determine the IP pr otocols enabled on the switch.
Allowed Protocols Issue 1 J uly 2006 87 Enable SSH on the switch ip ssh enable Disable SSH on the switch no ip ssh Enable Recovery Password on the switch terminal recovery password enable Disable Reco.
Establishing Switch Access 88 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5.
Issue 1 J uly 2006 89 Section 3: A v ay a C360 Configuration.
90 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5.
Issue 1 J uly 2006 91 Chapter 6: A vaya C360 Default Settings This section describes the procedures for the firs t-time configuration of the C360. The factory defaults are set out in detail in the t ables included in this chapter .
Avaya C360 Default Settings 92 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 MAC aging Enabled MAC aging time 5 minutes Keep alive frame transmission Enabled Network time acquisition Enabled, T ime protocol IP multicast filtering Disabled 802.
Configuring the Switch Issue 1 J uly 2006 93 Tip : Tip: Functions operate in their default settings unless configured otherwise. T able 22: Default Port Settings Function Default Setting Port s 1 to 2.
Avaya C360 Default Settings 94 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5.
Issue 1 J uly 2006 95 Chapter 7: Switch Configuration Introduction This chapter describes the p arameters you can define, such as its name and location, time parameters, and so o n. In addition, this chapter describes methods for saving a nd deploying device configurations and mo nitoring CPU utilization.
Switch Configuration 96 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 System Parameter Configuration Identifying the system In order to make a C360 switc.
Basic Switch Configurat ion Issue 1 J uly 2006 97 Operating p arameters Y ou can use the following commands to conf igure and display t he mode of operation for the switch and display key pa rameters.
Switch Configuration 98 Inst allation and Configuration Guide Avaya C360 Multilayer Stackable Switches, ve rsion 4.5 Display the time status and parameters show time p arameters Display the current time zone offset show tim ezone Get the time from the time server get time In order to.
Uploading and Downloa ding Device Configurations and Images Issue 1 J uly 2006 99 Uploading and Downloading De vice Configurations and Images The C360 allows you to backup and restore dev ice configur.
Switch Configuration 100 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 Note: Note: *The running configuration is not saved automatically after a reset.
Uploading and Downloa ding Device Configurations and Images Issue 1 Ju ly 2006 101 Layer 3 Configuration File The Configuration File feature allo ws the user to rea d the rout ing configuration p arameters and save them to a file on the st ation. The routing configuration commands in the file are in CLI format.
Switch Configuration 102 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 Upload a startup configuration file from the device using SCP copy startup-co n.
SCP Protocol Support Issue 1 Ju ly 2006 103 SCP Protocol Support In addition to dat a transfer via an SSH session, the SSH pro tocol is also used to support SCP for secure file transfer . When using SCP , the C360 is the client, and an SCP server must be installed on the management st ation.
Switch Configuration 104 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 System Logging System Logging Introduction The C360 System Logging feature is c.
System Logging Issue 1 Ju ly 2006 105 Sinks System logging messages can be se nt via a numbe r of "sinks" or methods. Ta b l e 2 7 provides a list of available sinks. Message Facilities A message facility is a software sub-system from which a logging message can originate.
Switch Configuration 106 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 Syslog Servers Remote logging using Syslog server s provides the follo wing adv.
System Logging Issue 1 Ju ly 2006 107 - Log file – Informational - Console – Informational - T elnet/SSH session – W arning ● System Logging Commands Tip : Tip: The system logging configuration is not saved to NVRAM. The configuration only affect s the active session fro m which the commands are execut ed.
Switch Configuration 108 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 Defines the access level associated with a Syslog server sink. A user cannot specify an admission level higher than the level assigned to him.
Telnet Client Support Issue 1 Ju ly 2006 109 T elnet Client Support Introduction to T elnet The C360 supports invocation of a T elnet client from the CLI. The T elnet client implementation enables you to control the destination port fo r co nnecting daemons that listen on a non-default port.
Switch Configuration 110 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 Monitoring CPU Utilization The C360 provides you with the a bility to monito r CPU utilization on each module of the st ack.
Issue 1 Ju ly 2006 111 Chapter 8: A vaya C360 Layer 2 Features This section describes the C360 Layer 2 feat ures. It provides the basic procedures for configuring the C360 for Layer 2 operation. The C360 supports a range of Layer 2 features. Each feature has CLI commands associated with it.
Avaya C360 Layer 2 Features 112 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 Fast Ethernet Fast Ethernet is a newer version of Ethern et, su pporting dat a transfer rates of 100 Mbp s.
Ethernet Issue 1 Ju ly 2006 113 Configuring Ethernet Parameters Auto-Negotiation Auto-Negotiation is a protocol th at runs between two stations, two switches or a st ation and a switch. When enabled, Auto-Negotia tion negotiates port speed and duplex mode by detecting the highest common denominator port conne ction for the endst ations.
Avaya C360 Layer 2 Features 114 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 Priority By its nature, network traf fic varies greatly over time, so short-term peak loads may exceed the switch capacity .
Ethernet Issue 1 Ju ly 2006 115 The first half of a MAC address contain s the ID number of the device manufacturer . These IDs are regulated by an Internet st andards body . The second half of a MAC address represents the serial number assigned to the de vice by the manufactu rer .
Avaya C360 Layer 2 Features 116 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 Set the auto negotiation mode of a port set port negotiation Administrat.
VLANs Issue 1 Ju ly 2006 117 VLANs VLAN Overview A VLAN is made up of a group of devices on one or more LANs t hat are configur ed so that they operate as if they form an in dependent LAN, when in fact they may be located on a number of different LAN se gments.
Avaya C360 Layer 2 Features 118 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 Figure 24: VLAN Overview In virtual topological ne tworks, the network devic es may be located in diverse places around the LAN-such as in dif ferent dep artments, on dif ferent floors or in different buildings.
VLANs Issue 1 Ju ly 2006 119 Figure 25: VLAN Switching and Bridging VLAN T agging VLAN T agging is a method of con trolling the distribution of informa tion on the network.
Avaya C360 Layer 2 Features 120 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 multi-tenant networks, where each user has his a VLAN for privacy , but the whole building has a shared high-speed connection to the ISP .
VLANs Issue 1 Ju ly 2006 121 Figure 26: Multiple VLAN Per-port Binding Modes Ingress VLAN Security Ingress VLAN security uses VLAN tagging in fo rmation to drop pa ckets which do not have the appropriate tagging. Th e accept or drop acti on depends on the binding mode of the ingress port.
Avaya C360 Layer 2 Features 122 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 T able 31 shows the relationship between the bindi ng mode and the whether the packet is accepted. VLAN CLI Commands The following tab le contains a list of the CLI commands for the VLAN feature.
IEEE 802.1x (Port Based Ne twork Access Control) Issue 1 Ju ly 2006 123 IEEE 802.1x (Port Based Network Access Control) Port Based Network Access Control (IEEE 802.
Avaya C360 Layer 2 Features 124 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 ● As a result of an authentication attempt, the C360 port can be either in a "blocked " or a "forwarding" state.
IEEE 802.1x (Port Based Ne twork Access Control) Issue 1 Ju ly 2006 125 - Enable the RADIUS feature. - Configure the port used to access the RADIUS server as "force-authorized." Tip : Tip: Y ou can configure on the RADIUS server a PVID, st atic VLAN binding and port level for each authenticated user .
Avaya C360 Layer 2 Features 126 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 Display all the port dot1x statistic s show port dot1x st atistics Set t.
Spanning Tree Protocol Issue 1 Ju ly 2006 127 S p anning T ree Protocol Overview C360 switches support both common S panning T ree protocol (802.1d) and the enhanced Rapid S p anning T ree protocol (802.1w). IEEE 802.1w is a faster and more sophisticated version of the 802.
Avaya C360 Layer 2 Features 128 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 a loop in an extended network, bridge s may forward traf fic indefinitely , which can result in increased traf fic and degradation in network performance.
Spanning Tree Protocol Issue 1 Ju ly 2006 129 ● Improvement in the time it ta kes to propagate TC information . S pecifically , TC information does not have to be prop agated all the way back to the Root Bridge (and back) to be changed. ● Origination of BPDUs on a port-by-port basis.
Avaya C360 Layer 2 Features 130 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 S p anning T ree Implement ation in the C360 RSTP is implemented in C360 family of product s so that it is interoperable with t he existing implementation o f STP .
Spanning Tree Protocol Issue 1 Ju ly 2006 131 S p anning T ree Protocol CLI Commands The following t able cont ains a list of CLI comm ands for the S panning T ree feature. The rules of syntax and outp ut examples are all set out in detail in the Reference Guide for the A vaya C360 Converged S tackable Switch, 10-300506.
Avaya C360 Layer 2 Features 132 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 MAC Security The MAC security function is intended to filter incoming frames (from the line) with a n unauthorized source MAC address (SA).
MAC Security Issue 1 Ju ly 2006 133 currently learnt on this port are preserved and consid ered as secure MAC, unless they are removed using clear secure mac command. Individual secure MACs can also be a dded. Tip : Tip: Y ou can add a MAC address to more than one port on the device.
Avaya C360 Layer 2 Features 134 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 LAG (Link Aggregate Group) LAG Overview A LAG uses multiple port s to create a high bandwid th connection with another device.
Port Redundancy Issue 1 Ju ly 2006 135 LAG Implement ation in the C360 This section describes the implement ation of the LAG feature in the C360 product family .
Avaya C360 Layer 2 Features 136 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 In addition to Link Aggreg ation Groups - which compr ise the basic redundancy mechanism within the switch - the C360 of fers an addi tional port redundancy scheme.
Port Redundancy Issue 1 Ju ly 2006 137 Intermodule Port Redundancy The intermodule port redundancy feature support s one pair of red undant ports per st ack. Unlike Port Redundancy definitio ns, intermodule port redundancy definitions are ret ained after st ack renumbering.
Avaya C360 Layer 2 Features 138 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 Tip : Tip: Intermodule Port Redundancy does not interwork with the S panning T ree Algorithm. Port Redundancy CLI Commands The following tab le contains a list of the CLI commands for the Redundancy feature.
IP Multicast Filtering Issue 1 Ju ly 2006 139 Port Classification Overview With the C360, you can classify any port a s regular or valuable. Setting a port to valuable means that, in case of Ethernet link failure of that port, a link fault trap can be sent even when the port is disabled.
Avaya C360 Layer 2 Features 140 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 The C360 supports multicast filtering. The C360 learns which switch ports need to receive which multicast packet s and configures the necessary information into the switch's hardware tables.
RMON Issue 1 Ju ly 2006 141 ● The Group Filtering Delay time is the time that the sw itch waits between becoming aware of a Multicast group on a cert ain VLAN and st arting to filter traffic for this group . IP Multicast CLI Commands The following table cont ains a list of the CLI commands for the IP Multicast feature .
Avaya C360 Layer 2 Features 142 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 RMON is the internationally recognized and app roved standa rd for detailed analysis of shared Ethernet media. It ensures consistency in t he monitoring and d isplay of statistics between different ve ndors.
SMON Issue 1 Ju ly 2006 143 SMON SMON Overview SMON is Avaya's st andard -setting switch moni toring technolog y that has now been adopted as IETF standard RFC 2613. SMON extends the RMON st andard to provide the switch monitoring tools and features you need t o analyze the switched network and all it s components .
Avaya C360 Layer 2 Features 144 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 SMON extends both RMON I for the MAC layer , and RMON 2 for the network layer and higher . SMON monitoring collects a nd displays data in real- time.
Weighted Queuin g Issue 1 Ju ly 2006 145 Port Mirroring CLI commands Port Mirroring Implement ation in the C360 Note the following limit ations: ● The VLAN binding p arameters of the source and destin ation ports must be id entical.
Avaya C360 Layer 2 Features 146 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 ● When the Priority scheme is set to "S trict", the Lower priority queue will transmit only if none of the Higher priority queues has nothing to transmit.
LLDP Agent Issue 1 Ju ly 2006 147 attached to the same LAN. These can all be repor ted to managemen t stations via IEEE-defined Simple Network Management Protocol (SNMP) Manag ement Information Bases (MIBs). LLDP information is transmitted periodica lly .
Avaya C360 Layer 2 Features 148 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 Configuring the LLDP Agent T o configure LLDP: 1. Enable the LLDP agent globally using the set lldp s ystem-control command.
LLDP Agent Issue 1 Ju ly 2006 149 LLDP Agent CLI Commands The following table contains a list of the CLI co mmands for the LLDP Agent feature. The rules of syntax and outp ut examples are all set out in detail in the Reference Guide for the A vaya C360 Converged S tackable Switch, 10-300506.
Avaya C360 Layer 2 Features 150 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5.
Issue 1 Ju ly 2006 151 Chapter 9: A vaya C360 Layer 3 Features This section describes the C360 Layer 3 feat ures. It provides the basic procedures for configuring the C360 for Layer 3 operation.
Avaya C360 Layer 3 Features 152 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 Obt aining a Routing License Key T o obtain a License Key that enables routing features: 1. Go to http://license-lsg.avaya.
Obtaining and Activating a Lice nse Key Issue 1 Ju ly 2006 153 2. Enter the Certificate Key and Certificate T ype. 3. Click Next..
Avaya C360 Layer 3 Features 154 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 4. Enter contact information (o nce per certificate) 5.
Obtaining and Activating a Lice nse Key Issue 1 Ju ly 2006 155 6. View number of licenses lef t..
Avaya C360 Layer 3 Features 156 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 7. Enter serial number of the switch(es) or module. T o identify serial numbers use the CLI command: show module-identity .
Obtaining and Activating a Lice nse Key Issue 1 Ju ly 2006 157 8. Click Generate. The feature-enabling license code is generated.
Avaya C360 Layer 3 Features 158 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 Activating a Routing License Key T o activate a Routing License Key: 1. Enter the acquired Routing License Ke y into the C360 switch using the set license CLI CLI command.
What is Routing? Issue 1 Ju ly 2006 159 The Routing Update Message is one such messag e. Routing Updates generally consist of all or a portion of a routing t able. By analyzing Routing Updates from all routers, a router can build a detailed picture of network topology .
Avaya C360 Layer 3 Features 160 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 Figure 29: Routing The relation between the destina tion host's pro.
Routing Configuratio n Issue 1 Ju ly 2006 161 Routing Configuration Forwarding The C360 forwards IP packet s between IP networks. When it receives an IP packet through one of its in terfaces, it forwards the p acket through one of it s interfaces.
Avaya C360 Layer 3 Features 162 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 IP Configuration IP Configuration CLI Commands In order to.
IP Configuratio n Issue 1 Ju ly 2006 163 Assigning Initial Router Parameters T o configure the initial router parameters perform the following via the CLI: 1. T ype set device-mode router and press Enter . Y ou will be prompted to reset the switch. 2.
Avaya C360 Layer 3 Features 164 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 Tip : Tip: If the IP interface is on VLAN #1, continue with S tep 7.
RIP (Routing Interchange Protocol) Configuration Issue 1 Ju ly 2006 165 operating RIPv1, you must not configure vari able length subnet masks (VLMS). Each IP network must have a single mask, implying that all subnet s in a given IP network are of the same size.
Avaya C360 Layer 3 Features 166 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 RIP CLI Commands In order to.
OSPF (Open Shortest Path Fir st) Configuration Issue 1 Ju ly 2006 167 OSPF (Open Shortest Path First) Configuration OSPF Overview OSPF is a routing protocol developed for IP networks based on the shortest p ath first or link-state algorithm. It was introduced to overcome the limitations of RIP in increasingly complex network desig ns.
Avaya C360 Layer 3 Features 168 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 OSPF CLI Commands In order to.
Static Routing Configuration Issue 1 Ju ly 2006 169 S t atic Routing Configuration S t atic Routing Overview When dynamic routing protocols (RIP or OSPF) are not appropriate, you can manually configure static ro utes to indicate the next hop on the p ath to the final p acket destination.
Avaya C360 Layer 3 Features 170 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 S t atic Routing Configuration CLI Commands Route Preferences The routing table may contain routes from d ifferent sources.
Route Redistribution Issue 1 Ju ly 2006 171 C360 protocol preferences are listed below from the most to the least preferred: 1. Local (directly attached net) 2. High-preference static (man ually configured routes) 3. OSPF internal routes 4. RIP 5. OSPF external routes 6.
Avaya C360 Layer 3 Features 172 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 Route Redistribution Commands ARP (Address Resolution Prot ocol) T able Configuration ARP Overview IP logical network addresses are independent of physical addresses.
ARP (Address Resoluti on Protocol) Table Configuratio n Issue 1 Ju ly 2006 173 Figure 30: Building an ARP T able The ARP T able The ARP table is used to store re cently used pa irs of IP/MAC addresses. This saves time and communication costs, since the hos t looks in the ARP cache first when transmitting a packet.
Avaya C360 Layer 3 Features 174 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 ARP CLI Commands In order to.
BOOTP/DHCP (Dynamic Host Configur ation Prot ocol) Relay Configu ration Issue 1 Ju ly 2006 175 BOOTP/DHCP (Dynamic Host Configuration Protocol) Relay Configuration BOOTP/DHCP Overview BOOTP Short for .
Avaya C360 Layer 3 Features 176 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 The DHCP/BOOTP server uses the relayed netw or k information to decide from which subn et the address should be allocated.
VRRP (Virtual Router Redundancy Protocol) Configuration Issue 1 Ju ly 2006 177 Configuration is performed on a per-interface basis. When a netbios broadcast packe t arrives from an interface on which netbios rebroadcast is enabled, the packet is distributed to all other interfaces configured to rebroadcast netbios.
Avaya C360 Layer 3 Features 178 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 takes over the role of master router .
VRRP (Virtual Router Redundancy Protocol) Configuration Issue 1 Ju ly 2006 179 ● By the end of the routers configu ration, and when the network is up, the main router for each virtual router will be.
Avaya C360 Layer 3 Features 180 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 Policy Configuration Policy Configuration Overview The C360 supports QoS (Quality of Service) by using multiple priority levels and IEEE 802.
Policy Configurat ion Issue 1 Ju ly 2006 181 ● The packet proto col ● Matching the p acket's source or destination IP address to the configured priority policy . ● Whether the pa cket sour ce or de stination TCP/ UDP port numbe r falls within a pre- defined range.
Avaya C360 Layer 3 Features 182 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 Set the source list, destination list, and destination module for copying an entire Policy List ip access-list-copy Set the DSCP-to-COS mapping.
Policy Configurat ion Issue 1 Ju ly 2006 183 Policy Configuration Example Figure 32: C360 Policy Set the policy control source to either local or remote policy server set qos policy source Copy current policy and router configuration to the st artup configuration file copy running-config startup-con fig In order to.
Avaya C360 Layer 3 Features 184 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 Policy Configuration Example The following shows configuration o f Access List 100: 1. Assigning priority 6 to all TCP traff ic originating in network 149.
IP Fragmentation and Rea ssembly Issue 1 Ju ly 2006 185 4. fragments are usually not reas sembled until final destination IP Fragment ation/Reassembly CLI Commands In order to.
Avaya C360 Layer 3 Features 186 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5.
Issue 1 Ju ly 2006 187 Chapter 10: A vaya C360 Power over Ethernet Features This chapter describes the C360-PWR PoE (Power over Ethe rnet Features). It provides the basic procedures for configuring the C3 60 for PoE operation.
Avaya C360 Powe r over Ethernet F eatures 188 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 How the C360-PWR Switch es Detect a Powered Device The C36.
Power Over Ethernet Issue 1 Ju ly 2006 189 “Plug and Play" Operation Y ou can add and remove powered devices without manually reconfiguring the switch, since it performs a periodic automatic load detection scan on non-powere d ports.
Avaya C360 Powe r over Ethernet F eatures 190 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 Power over Ethernet in Converged Networks Figure 34 shows the C364T -PWR as part of an ultra-reliable A vaya network.
Power Over Ethernet Issue 1 Ju ly 2006 191 Power over Ethernet CLI Commands In order to... Use the following command... Perform a hardware reset of the switch and the PoE circuitry reset module-and-po.
Avaya C360 Powe r over Ethernet F eatures 192 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5.
Issue 1 Ju ly 2006 193 Chapter 1 1: C360 Device Manager This chapter describes the inst allation procedures for the C360 Device Manager Overview The Device Manager provides the following: ● Managing and monitoring Power over Ethernet. ● Device Configuratio n - Viewing and mo dify ing the dif ferent device configurations.
C360 Device Manager 194 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 System Requirement s Minimum hardware and operating system requirement s are: .
Running th e De vi ce Ma na g er Issue 1 Ju ly 2006 195 Running the Device Manager Note: Note: Assign an inband or out-of-band interface IP address to the switch before beginning this procedure. T o run the Device Manager: 1. Open your browser . 2. Enter the URL of the switch in the format http://aaa.
C360 Device Manager 196 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 Figure 35: The Welcome Page 4. If you have the Java plug-in inst alled, the Device Manager should open in a new window (see Figure 36 ).
Installing the Java Plug-in Issue 1 Ju ly 2006 197 5. If you do not have the Java plug-in insta lled, follow the instructions on the W elcome page to install the plug-in (se e Installing the Java Plug-in ). Inst alling the Java Plug-in If the network manager has configured the system, the plug-in should be inst alled automatically .
C360 Device Manager 198 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 Inst alling the On-Line Help and Java Plug-In on your Web Site Tip : Tip: This p.
Issue 1 Ju ly 2006 199 Section 4: T r oubleshooting and Maintaining the A v a y a C360.
200 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5.
Issue 1 Ju ly 2006 201 Chapter 12: T roubleshooting the Inst allation T roubleshooting the Inst allation This section will allow you to perform basic troubl eshooting of the inst allation. If you are unable to solve the problem af ter following the procedures in this chapter , please contact A vaya T echnical Support.
Troubleshooting the Ins ta llation 202 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 ● Mis-configuration ● Use the show port CLI command to show the port parameters an d check they are compatible with the att ached device.
Troubleshooting t he Installation Issue 1 Ju ly 2006 203 S tacking not functioning Tip : Tip: Use the stack health command to display the st atus of the stack.
Troubleshooting the Ins ta llation 204 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 S t ack Health The C360 softwa re provides a S tack Health feature for verifying the integrity of the C360 and P330 and P330-ML st acking module and cables.
Stack Health Issue 1 Ju ly 2006 205 S t ack Health CLI Commands The following ta ble contains a list of the CLI co mman ds for the S tack Health feature. The syntax and output examples are set out in det ail in the Reference Guide for the A vaya C360 Converged S tackable Switch, 10-300506.
Troubleshooting the Ins ta llation 206 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5.
Issue 1 Ju ly 2006 207 Chapter 13: Maintenance Introduction This section provides basic maintenance in formation for the C360 and it s components. Fo r issues that are not covered in t his chapter or in Chapter 12: T roubleshooting the Installation please contact your A vaya representative.
Maintenance 208 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 Hardware NVRAM Initialization If you wish to perform a hardware NVRAM initialization, then perform the fo llowing steps: ! CAUTION: CAUTION: C360 switches and stacking modules cont ain components sensitive to electrostatic disch arge.
Hardware NVRAM Initializati on Issue 1 Ju ly 2006 209 Figure 37: Location of the NVRAM INIT Jumpers 3. Insert the X360STK module into the C360 sw itch where you wish to perform the NVRAM initialization. Refer to Inst alling the X360STK S tacking Module for furt her information.
Maintenance 210 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5.
Issue 1 Ju ly 2006 211 Chapter 14: Up dating the Firmware This section provides the basic procedure f or downloading and updating the C360 system firmware. ! CAUTION: CAUTION: Refer to Before you Install the A vaya C360 before undertaking any of the procedures det ailed in this section.
Updating the Firmware 212 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 Tip : Tip: Please download both the new A vaya firmware and the new Device Manager versions. Whichever version of the firmwa re you decide to run, alwa ys be sure to match the correct firmware and Device Manage r versions.
Issue 1 Ju ly 2006 213 Appendix A: Mixed S t acks This appendix covers deployment of the C3 60 in mi xed st ack e nvironment s. Ple ase refer to th e relevant section for i nformation. Tip : Tip: For additional information, see the Relea se Notes or the Av aya Support site: http://support.
Mixed Stack s 214 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 Hardware Comp atibility This section describes hardware comp atibility issues. S t acking Tip : Tip: It is recommended to put the C360 switches at the bottom or top of a mixe d stack for easier connection of cables.
Hardware Compatibility Issue 1 Ju ly 2006 215 BUPS The Backup Power Supplies are not interchange able. Please refer to Ta b l e 3 8 for information on which st acking module to use. Tip : Tip: Please refer to the appropriate document ation for further information.
Mixed Stack s 216 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 Feature Comp atibility While most features are the same on all the switches, there are some dif ferences in implementation a nd functionality .
Feature Compatibility Issue 1 Ju ly 2006 217 1. Softw a re version 4. 5 on l y . Note: Note: Certain CLI co mmands apply to the C36 0 only . If you run them on othe r switches you may receive an "operation failed" messa ge.
Mixed Stack s 218 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5.
Issue 1 Ju ly 2006 219 Appendix B: Configuring C360 QoS for A vaya IP T elephones Introduction This appendix covers configuring C360 QoS sett ings for A vaya IP T elephony environment s. Tip : Tip: For additional information, refer to t he IP T elephony Deploymen t Guide on the Avaya Support Site: http://support.
Configuring C360 QoS for Avaya IP Telephones 220 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5.
Issue 1 Ju ly 2006 221 Appendix C: S t andards and Comp atibility A vaya C360 St andards Supported The Ava ya C360 complies with the following standards. IEEE ● 802.1D Bridges and ST A ● 802.1p Priority T agging on all ports ● 802.1Q VLAN T agging support on all ports ● 802.
Standards and Compatibility 222 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 ● RFC-2613 SMON support for group s - Data Source Capabilities, Port Copy , VLAN and Priority S tatistics ● RFC-2674 Bridge MIB Group s - dot1dbase and dot1dS tp fully implemented.
IETF - Network Monitoring Issue 1 Ju ly 2006 223 IETF - Network Monitoring ● RMON (RFC 1757) support for group s 1,2,3, and 9 -S t a t i s t i c s -H i s t o r y -A l a r m s -E v e n t s ● SMON (.
Standards and Compatibility 224 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5.
Issue 1 Ju ly 2006 225 Appendix D: S pecifications Physical Height 1U (44.45 mm, 1.75”) Width 431 mm (17”) Depth 365 mm (14.4”) Weight ● C363T ● C363T -PWR ● C364T ● C364T -NEBS ● C364T -PWR 4.9 kg (10.8 lb.) 5.5 kg (12.1 lb.) 5.0 kg (1 1 lb.
Specifications 226 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 Power Requirement s C363T C363T -PWR Input voltage 100 to 240 V AC 50/60 Hz 100 to 240 V AC 50/60 Hz Power dissipation 60 W max 420 W max AC Input current 1.
Environmental. Issue 1 Ju ly 2006 227 Environment al. Note: Note: The C364T NEBS complies to the NEBS st andard Safety ● UL listed to UL60950-1. ● C-UL (UL for Canada) certified to CAN/CSA-C22.2 No. 60950 -0-03. ● CE for Europe approved according to EN 60950 an d IEC 60950-1.
Specifications 228 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 MTBF Interfaces ● C363T : 24 x 10/100 BASE-T RJ-45 port c onnectors + 2 x SFP GBIC connectors. ● C363T-PWR: 24 x 10/100 PoE BASE-T RJ-45 po rt connectors + 2 x SFP GBIC connectors.
GBIC Transceivers Issue 1 Ju ly 2006 229 The LX transceiver has a W avelength of 1300 nm, T ransmission Rate of 1.25 Gbps, Input V oltage of 3 .3V , and Maximum Output Wa ttage of -2 dBm. SX T ransceiver Y ou may connect a 50 µm or 62.5 µm multim ode (MMF) fiber cable to a 1000BASE-SX SFF/ SFP GBIC port.
Specifications 230 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5 Console Pin Assignment s For direct Console communications, connect t he C360 to the Console T erminal using the supplied RJ-45 crossed cable and RJ-45 to DB-9 adapter .
Ethernet Issue 1 Ju ly 2006 231 Ethernet ● VLANs - Layer 2: 3,071 - Layer 3: 255 ● MAC addresses: minimum 16k ● Priority queuing: 4 queues ● Multicast groups: 1k.
Specifications 232 Ins tallation and Configurati on Gu ide Avaya C360 Mult ilayer Stackable Switches, versio n 4.5.
Issue 1 Ju ly 2006 233 Index Index Numerical 802.1x support . . . . . . . . . . . . . . . . . . . 12 3 CLI commands . . . . . . . . . . . . . . . . . 125 configuring procedure . . . . . . . . . . . . . . 124 A AC power, connecti ng . . . . . . . . . .
234 Installation and Configuratio n Guide Avaya C3 60 Multilayer St ackable Switches, version 4.5 Index network . . . . . . . . . . . . . . . . . . . . 44 supplemental grounding . . . . . . . . . . . . . 54 Connections budgeting power . . . . . . . . .
Issue 1 Ju ly 2006 235 Index installing . . . . . . . . . . . . . . . . . . . . 45 specifications . . . . . . . . . . . . . . . . . . 228 Gigabit ethernet . . . . . . . . . . . . . . . . . . 11 2 Grounding, connectin g supplemental . . . . . . . . 54 H Half-duplex .
236 Installation and Configuratio n Guide Avaya C3 60 Multilayer St ackable Switches, version 4.5 Index M MAC address . . . . . . . . . . . . . . . . . . . . 11 4 aging . . . . . . . . . . . . . . . . . . . . . 11 5 security . . . . . . . . . . . . . .
Issue 1 Ju ly 2006 237 Index restricting management access . . . . . . . . . 84 SCP support . . . . . . . . . . . . . . . . . . 103 SNMP . . . . . . . . . . . . . . . . . . . . . 73 Settings, device default . . . . . . . . . . . . . . . 91 Site preparation .
238 Installation and Configuratio n Guide Avaya C3 60 Multilayer St ackable Switches, version 4.5 Index.
An important point after buying a device Canon C360 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Canon C360 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Canon C360 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Canon C360 you will learn all the available features of the product, as well as information on its operation. The information that you get Canon C360 will certainly help you make a decision on the purchase.
If you already are a holder of Canon C360, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Canon C360.
However, one of the most important roles played by the user manual is to help in solving problems with Canon C360. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Canon C360 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
