Instruction/ maintenance manual of the product Polycom SoundPoint IP 430 ADTRAN
Go to page of 31
User Guide SoundP oint ® IP 430 SIP 1.6 SoundPoint ® IP 430 SIP M e n u V o i c e M a i l D o N o t D i s t u r b Se l 1 3 D E F 5 J K L 4 G H I 6 M N O 8 T U V 7 P Q R S 9 W X Y Z 0 O P E R * # 2 A.
Contents Introduction ...................................................... 1 Par ts List .......................................................... 1 Installing SoundPoint ® IP 430 SIP ......................... 2 Connecting Network and Power Source .
Multilingual Suppor t (Localization) ............................................ 18 Phone Reboot ........................................................................ 19 Optional Features ............................................ 19 T ext Messaging .
1 Thank you for choosing SoundPoint ® IP 430 SIP , a full-duplex, hands-free phone running the industry standard Ses- sion Initiation Protocol (SIP). This unit provides business telephony features and functions such as Multiple Call Appear - ances, Call Hold, T ransfer , and Confer - ence over an IP network.
2 Installing SoundPoint ® IP 430 SIP This section provides basic installation instructions and information for obtaining the best performance with the Sound- Point ® IP 430 SIP phone. If you require additional information or assistance with your new phone, please contact your sys- tem administrator .
3 Connecting the Handset and Optional Headset Attaching the Base (Optional) 1. Connect the short, straight end of the phone cord to the handset and the corresponding longer straight end of the cord to the handset jack on the back of the phone. 2. Connect the headset (optional accessory) to the headset jack on the back of the phone.
4 4. W ith mounting tab of the base unit facing up, fasten the base unit to wall using wall anchors (not included). Snap the SoundPoint ® IP 430 into place. Wallmount Method 2. On the back of the phone, remove the key located behind the hook- switch.
5 Features Line/Speed Dial Keys Speakerphone Microphone Mute Headset Feature Keys Access important features using these keys. Dial Pad These 12 keys provide the 10 digits, alphabetic, and special characters available in context sensitive applications.
6 F eature K ey Description H o l d D e l S e l 1 3 D E F 5 J K L 4 G H I 6 M N O 8 T U V 7 P Q RS 9 W X YZ 0 O P ER * # 2 A B C Ho ld De l Se l Me nu Me ssa ges D o N o t D i s t u r b ABC 2 1 DEF 3 .
7 Placing a Call Using the Handset: 1. T o obtain dial tone, pick up the handset. 2. Dial the desired number . OR Dial by SIP URL/IP address † : • After obtaining dial tone, press Name • Enter URL or IP (press * for “.” and # or “@”) • Press Send to complete the call.
8 If multiple calls are on hold on a single line key , use the arrow keys to switch be - tween the calls then press the Resume soft key to retrieve the desired call. If more than two calls are on hold on a single key , an indication will appear on the display , for example “2/3” shows that this is the second call out of three calls.
9 General Key Use T o navigate through menus and to enter data, these are useful tips: 1. Use H o ld D e l S e l 1 3 D EF 5 J KL 4 G HI 6 M NO 8 T UV 7 P QR S 9 W XY Z 0 O PE R * # 2 A BC Hol d Men u .
10 1. During a call, press the T rnsfr soft key (the active call is placed on hold). 2. Dial the number to which you want to transfer the call. O R Use the arrow keys to access speed dial numbers, missed, placed, and received call lists. From one of these lists, press the Dial soft key .
1 1 Calls may be Forwarded (Diverted) to another extension as follows: 1. Press the Fwd soft key from the phone’ s idle display or press H o l d D e l S e l C o n f e r e n c e 1 3 D E F 5 J K L 4 G.
12 Time and Date T ime and Date is clearly displayed on the SoundPoint ® IP 430 SIP phone. If the phone cannot obtain a time and date from the server , the display will flash. Contact your system administrator if either time or date is incorrect. Users have control over the format of the display and can turn it off.
13 Ring Type Many ring types are available including a “Silent Ring”. Users can select different rings to distinguish between lines or to have a different ring from their neighbor’ s phone.
14 T o add or edit a contact: 1. Press H o l d D e l S e l C o n f e r e n c e 1 3 D EF 5 J KL 4 G HI 6 M NO 8 T UV 7 P QR S 9 W XY Z 0 O PE R * # 2 A BC H o l d D e l S e l D i r e c t o r i e s S e .
15 T o quickly view a complete list of assigned speed dial entries, pr ess H o l d D e l S e l 1 3 D EF 5 J KL 4 G HI 6 M NO 8 T UV 7 P QR S 9 W XY Z 0 O PE R * # 2 A BC Ho ld Me nu Me ss ag es D o N .
16 Multiple Call Appear ances Each line on the phone can be configured to have one or more call appearances. More than one call appearance is useful if there is an active call and an incoming call arrives on the same line. In the example shown, extension 2020 is in an outbound call with 2024.
17 Shared Lines The phone supports shared lines ** . A shared line is indicated by a different line icon. In the diagram, the first line is private and the second line is shared. If two phones share a line, an incoming call to that number will cause both phones to ring.
18 Distinctiv e Ringing / Call T r eatment Users can set distinctive incoming ringing tones for contacts in their local directory . This allows identifica - tion of a contact by a specific ring tone. T o set a distinctive ring for a local contact: 1.
19 T e xt Messa ging Users can send and receive T ext messages on the phone. SIP Instant (T ext) Messag - ing is supported in real-time. Received messages will be indicated by a flashing Message W aiting Indicator LED on the front of the phone and optionally a visual notification on the display .
20 T o send a text message: 1. Press . 2. Select Instant Messages. 3. (Optional) If multiple lines are in use, first select from which line to send a message. 4. Press the New soft key . 5. Enter the desired extension or SIP URL. Press the 1/A/a soft key to alternate between numeric and up- per/lower case alphanumeric modes.
21 The softwar e running on the phone is compatible with W indows™ and MSN Messenger™ for peer-to-peer pr esence and instant messaging. 1. Press H o l d D e l S e l C o n f e r e n c e 1 3 D E F 5.
22 No Dial-T one V erify power is correctly applied to the SoundPoint ® IP 430 SIP phone: • Check that the display is illuminated. • Make sure the LAN cable is inserted properly at the rear of the phone (try unplugging and re-inserting the cable).
23 No R esponse fr om Fea tur e K ey Pr esses V erify phone is in active state: • Make a call to the phone to check for inbound call display and ring- ing as normal. If successful, try to press feature keys within the call to access Directory or Buddy Status for example.
24 In accordance with Part 15 of the FCC Rules, the user is cautioned that any chang- es or modi by Polycom, Inc. could void the user ’ s authority to operate the equipment. Installa Modifications tion Instr uctions Installation must be performed in accor - dance with all relevant national wiring rules.
2 5 ADTRAN Li mited War r anty and Lim itatio n Liability LIMITED W ARRANTY . ADTRAN, Inc. warrants thi s product ag ainst de fects and malfu nction s dur ing a one (1) year per iod from th e date o f original pu rchase. If there is a defect or malfunc tion, ADTRAN, Inc .
2 6 R epair and R etur n If yo u determi ne that a repa ir is need e d, please con tact yo ur ADTRAN certi fied representa tive. They will assi st you in the repair and return process. Ser vice Agr eements Please co ntact yo ur ADTRAN auth orized dealer for inform ation ab out se rvice agreement s app licable to you r prod uct.
27 conten ts o f th is m anu al may b e cop ied, repr oduced, or transmitted in any form or by any m eans, o r tran slated in to ano ther lang uage or form at, in whole or p art , without wri tten consen t from ADTRAN, Inc. Do not remove ( or al low an ybody else to remo ve ) any pro duc t id enti ficat io n, copy right or other notice s.
©2005 Polycom, Inc. All Rights Reserved. Polycom®, SoundPoint®, and the Polycom logo design are registered trademarks of Polycom, Inc. in the U.S. and various countries.
An important point after buying a device ADTRAN Polycom SoundPoint IP 430 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ADTRAN Polycom SoundPoint IP 430 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ADTRAN Polycom SoundPoint IP 430 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ADTRAN Polycom SoundPoint IP 430 you will learn all the available features of the product, as well as information on its operation. The information that you get ADTRAN Polycom SoundPoint IP 430 will certainly help you make a decision on the purchase.
If you already are a holder of ADTRAN Polycom SoundPoint IP 430, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ADTRAN Polycom SoundPoint IP 430.
However, one of the most important roles played by the user manual is to help in solving problems with ADTRAN Polycom SoundPoint IP 430. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ADTRAN Polycom SoundPoint IP 430 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
