Instruction/ maintenance manual of the product II Cambridge SoundWorks
Go to page of 20
User Manual.
.
3 3.
4 Introduction ................................................................4 Carton Contents..........................................................5 Setup Options..........................................................6-7 Connection Diagram .
5 CARTON CONTENTS A B E C F G H No.10 screws and plastic anchors D A) T wo Satellite Loudspeakers B) Desktop Stands,Thumb screws (installed on satellites) C) W allmount hardwar e, Self-adhesive Feet D.
SETUP OPTIONS Cambridge SoundWorks, Inc. supplies scr ews and plastic anchors for convenience, but it is the speaker purchaser’ s responsibility to insur e that any speaker mounting or placement is secure, stable and r eliable.
7 Remove, Invert and Replace Grille Panel W all Mounting With A Swivel Bracket Contact Cambridge SoundWorks about available swivel brackets. F) Follow the installation instructions for your par ticu- lar mounting bracket to attach it to a flat surface.
8 8 8 CONNECTION DIAGRAM AUDIO OUT Computer sound card Portable Playe Insert the green miniplug into your primary music source’s stereo minijack output (a sound card, a stereo TV or a Cambridge Connect a second sound source with a variable output to INPUT B .
9 RL -- R ++ Music er RED RED Left Speaker MicroWorks II Subwoofer Input Panel RED.
10 10 10 POSITIONING YOUR SPEAKERS SUBWOOFER/AMPLIFIER Place the Subwoofer cabinet on the floor , preferably near a wall. Do not place it on a desktop or shelf.
11 11 POSITIONING THE SA TELLITES 11 11 W all Placement (Swivel brackets available separately) Avoid facing a satellite parallel to a nearby wall (within 6-8 inches). The reflected sound fr om the wall degrades the sound coming directly fr om the satellite (diagram A).
12 12 12 12 CONNECTIONS V olume On/Off Control A) If you are using the Desktop Stand, slide the V olume Contr ol onto the support strut on one of the stands. B) The BLUE miniplug of the V olume On/Of f Control should be inserted into the subwoofer minijack “A” labeled “TO VOLUME CONTROL.
13 Other Connection Situations 1) Using the MicroWorks II as a high performance stereo television sound system. a) A stereo television with audio signal output typically has two RCA-type jacks (one red, one white). T o connect the V olume On/Of f Control to these jacks, obtain an audio cable adapter with two RCA plugs at one end and a 3.
14 2) Using the MicroWorks II as a sound system for a component CD player . T ypically , there ar e two RCA-type jacks (one red, one white) on the CD player . T o connect to these jacks, obtain a stereo signal cable with two RCA plugs on one end and a 3.
15 15 15 15 Speaker Connections T o connect the 2-meter speaker cables (two wires at each end): Push back the red speaker input tab on a satellite, exposing the wire hole. Fully insert one of the wires with a red band into the wire hole and r elease the tab.
16 OPERA TION AND FINAL ADJUSTMENT 16 16 16 1) Use the V olume Control or the signal sour ce control to vary output level. 2) Defeat or cancel any “tone control” or other sound adjustments within your audio program sour ce.
SPECIFICA TIONS Analog Input: 775 millivolts for full output 10 kohms input impedance Amplifiers: Satellite: 20 watts continuous at 1 kHz, two channels driven at less than .1% total harmonic distor tion. Subwoofer: 40 watts continuous at 100 Hz, one channel driven at less than .
.
.
P81-1750 CAMBRIDGE SOUNDWORKS, INC. 26 DARTMOUTH STREET , WESTWOOD, MA 02090 T elephone: 1-800-367-4434 Fax: 1-617-527-3194 A Company.
An important point after buying a device Cambridge SoundWorks II (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cambridge SoundWorks II yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cambridge SoundWorks II - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cambridge SoundWorks II you will learn all the available features of the product, as well as information on its operation. The information that you get Cambridge SoundWorks II will certainly help you make a decision on the purchase.
If you already are a holder of Cambridge SoundWorks II, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cambridge SoundWorks II.
However, one of the most important roles played by the user manual is to help in solving problems with Cambridge SoundWorks II. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cambridge SoundWorks II along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
